Search Results

Search found 23374 results on 935 pages for 'james may'.

Page 880/935 | < Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >

• Netgear VPN endpoint drops connectivity to single IP address

  - by Justin Bowers

  I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

  Read the article

• routing specific IP to ppp0 tunnel

  - by gompertz

  Hi All, I feel I've struggled with this long enough and need some help. I have a pptp tunnel and am trying to route destination traffic from 208.85.40.20 to the pptp tunnel (ppp0). (Keen observers may recognize the ip as being that of pandora.com). I am doing all this configuration on a router... and I know it's not working successfully as traceroute yields nothing but astericks. I've pasted relevant outputs below: (with some "security" editing to the addresses) root@OpenWrt:~# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28185 errors:0 dropped:0 overruns:0 frame:0 TX packets:24936 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4894242 (4.6 MiB) TX bytes:5941902 (5.6 MiB) eth0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:51829 errors:0 dropped:0 overruns:0 frame:0 TX packets:56824 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11490288 (10.9 MiB) TX bytes:11857913 (11.3 MiB) Interrupt:4 eth2 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:15426 TX packets:9529 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:423 (423.0 B) TX bytes:596036 (582.0 KiB) Interrupt:2 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2300 (2.2 KiB) TX bytes:2300 (2.2 KiB) ppp0 Link encap:Point-Point Protocol inet addr:68.68.39.250 P-t-P:172.16.20.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:165 errors:2 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7006 (6.8 KiB) TX bytes:3462 (3.3 KiB) vlan0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:28182 errors:0 dropped:0 overruns:0 frame:0 TX packets:33813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5006544 (4.7 MiB) TX bytes:6609774 (6.3 MiB) vlan1 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:173.183.111.3 Bcast:173.183.111.255 Mask:255.255.224.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23653 errors:0 dropped:0 overruns:0 frame:0 TX packets:23012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5522012 (5.2 MiB) TX bytes:4982944 (4.7 MiB) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:~# cat /etc/ppp/ip-up iptables -A FORWARD -t filter -i br0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.1/24 -d 0/0 -j MASQUERADE iptables -A forwarding_rule -o ppp0 -j ACCEPT iptables -A forwarding_rule -i ppp0 -j ACCEPT iptables -t nat -A postrouting_rule -o ppp0 -j MASQUERADE root@OpenWrt:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.20.1 * 255.255.255.255 UH 0 0 0 ppp0 208.85.40.20 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 173.183.192.0 * 255.255.224.0 U 0 0 0 vlan1 default d173-183-192-1. 0.0.0.0 UG 0 0 0 vlan1 default 192.168.1.1 0.0.0.0 UG 0 0 0 br0 Any advice is greatly appreciated, I'm not too great with network but am pretty astute at learning ;-)

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• Blocking 'good' bots in nginx with multiple conditions for certain off-limits URL's where humans can go

  - by Glenn Plas

  After 2 days of searching/trying/failing I decided to post this here, I haven't found any example of someone doing the same nor what I tried seems to be working OK. I'm trying to send a 403 to bots not respecting the robots.txt file (even after downloading it several times). Specifically Googlebot. It will support the following robots.txt definition. User-agent: * Disallow: /*/*/page/ The intent is to allow Google to browse whatever they can find on the site but return a 403 for the following type of request. Googlebot seems to keep on nesting these links eternally adding paging block after block: my_domain.com:80 - 66.x.67.x - - [25/Apr/2012:11:13:54 +0200] "GET /2011/06/ page/3/?/page/2//page/3//page/2//page/3//page/2//page/2//page/4//page/4//pag e/1/&wpmp_switcher=desktop HTTP/1.1" 403 135 "-" "Mozilla/5.0 (compatible; G ooglebot/2.1; +http://www.google.com/bot.html)" It's a wordpress site btw. I don't want those pages to show up, even though after the robots.txt info got through, they stopped for a while only to begin crawling again later. It just never stops .... I do want real people to see this. As you can see, google get a 403 but when I try this myself in a browser I get a 404 back. I want browsers to pass. root@my_domain:# nginx -V nginx version: nginx/1.2.0 I tried different approaches, using a map and plain old nono if's and they both act the same: (under http section) map $http_user_agent $is_bot { default 0; ~crawl|Googlebot|Slurp|spider|bingbot|tracker|click|parser|spider 1; } (under the server section) location ~ /(\d+)/(\d+)/page/ { if ($is_bot) { return 403; # Please respect the robots.txt file ! } } I recently had to polish up my Apache skills for a client where I did about the same thing like this : # Block real Engines , not respecting robots.txt but allowing correct calls to pass # Google RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ Googlebot/2\.[01];\ \+http://www\.google\.com/bot\.html\)$ [NC,OR] # Bing RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ bingbot/2\.[01];\ \+http://www\.bing\.com/bingbot\.htm\)$ [NC,OR] # msnbot RewriteCond %{HTTP_USER_AGENT} ^msnbot-media/1\.[01]\ \(\+http://search\.msn\.com/msnbot\.htm\)$ [NC,OR] # Slurp RewriteCond %{HTTP_USER_AGENT} ^Mozilla/5\.0\ \(compatible;\ Yahoo!\ Slurp;\ http://help\.yahoo\.com/help/us/ysearch/slurp\)$ [NC] # block all page searches, the rest may pass RewriteCond %{REQUEST_URI} ^(/[0-9]{4}/[0-9]{2}/page/) [OR] # or with the wpmp_switcher=mobile parameter set RewriteCond %{QUERY_STRING} wpmp_switcher=mobile # ISSUE 403 / SERVE ERRORDOCUMENT RewriteRule .* - [F,L] # End if match This does a bit more than I asked nginx to do but it's about the same principle, I'm having a hard time figuring this out for nginx. So my question would be, why would nginx serve my browser a 404 ? Why isn't it passing, The regex isn't matching for my UA: "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.30 Safari/536.5" There are tons of example to block based on UA alone, and that's easy. It also looks like the matchin location is final, e.g. it's not 'falling' through for regular user, I'm pretty certain that this has some correlation with the 404 I get in the browser. As a cherry on top of things, I also want google to disregard the parameter wpmp_switcher=mobile , wpmp_switcher=desktop is fine but I just don't want the same content being crawled multiple times. Even though I ended up adding wpmp_switcher=mobile via the google webmaster tools pages (requiring me to sign up ....). that also stopped for a while but today they are back spidering the mobile sections. So in short, I need to find a way for nginx to enforce the robots.txt definitions. Can someone shell out a few minutes of their lives and push me in the right direction please ? I really appreciate ANY response that makes me think harder ;-)

  Read the article

• windows 2003 server : can't join domain

  - by phill

  I originally tried to rejoin a computer to a network which led to a "cannot find domain" error. The username/password box don't even come up. some tests i ran: I can ping the server, however I can't ping the domain name domain1.local. nslookup can't find the domain either. It looks to the isp's dns instead of my own to resolve the local machines. So i go to the dns and run netdiag.exe and gives me this error. DNS test . . . . . . . . . . . . . : Failed [WARNING] Cannot find a primary authoritative DNS server for the name 'stmartinsrv.stmartin.local.'. [RCODE_SERVER_FAILURE] The name 'srv.domain1.local.' may not be registered in DNS. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.156.1'. Please wait for 30 minutes for DNS server replication. [WARNING] The DNS entries for this DC are not registered correctly on DNS se rver '68.94.157.1'. Please wait for 30 minutes for DNS server replication. [FATAL] No DNS servers have the DNS records for this DC registered. Redir and Browser test . . . . . . : Passed List of NetBt transports currently bound to the Redir NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The redir is bound to 1 NetBt transport. List of NetBt transports currently bound to the browser NetBT_Tcpip_{04BB0F6B-06AE-4D60-80C8-2A7A24C1D87B} The browser is bound to 1 NetBt transport. then running dcdiag C:\Program Files\Support Toolsdcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SRV Starting test: Connectivity The host 1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local cou ld not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (1c99f63c-49ec-40db-b3d3-6265c00fbd3e._msdcs.domain1.local) couldn't be resolved, the server name (srv.domain1.local) resolved to the IP address (192.168.1.21) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... SRV failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SRV Skipping all tests, because server SRV is not responding to directory service requests Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : domain1 Starting test: CrossRefValidation ......................... domain1 passed test CrossRefValidation Starting test: CheckSDRefDom ......................... domain1 passed test CheckSDRefDom Running enterprise tests on : domain1.local Starting test: Intersite ......................... domain1.local passed test Intersite Starting test: FsmoCheck ......................... domain1.local passed test FsmoCheck from previous postings, I've tried adding the domain suffix to the nic ip properties to both the client machine and the dc server which didn't help. note: there is only one nic on the server any ideas? thanks in advance

  Read the article

• nikto probe warning messages

  - by julio

  Hi-- I have a pretty standard VPS running Ubuntu 8.1, Apache 2.2, PHP 5 etc. -- standard Lamp stack. I am using suhosin and have tried my best to plug the obvious stuff, since I'm the only user-- there's no SSH access except via pubkey on a non-standard port, there's no root access by SSH, no FTP server running, iptables is set to discard anything outside of basically port 80 or my SSH port (there's no mail server or anything else). However, I've still been compromised (not badly as far as I can tell) probably by a SQL injection. I've locked down the SQL user (there's only one outside of root, and he's got limited priv, no file etc.) So I ran nikto to see what I'm doing wrong, and there's a list of things I've never seen, and can't find using "find" or any other method I'm aware of. See below: + /autologon.html?10514: Remotely Anywhere 5.10.415 is vulnerable to XSS attacks that can lead to cookie theft or privilege escalation. This is typically found on port 2000. + /servlet/webacc?User.html=noexist: Netware web access may reveal full path of the web server. Apply vendor patch or upgrade. + OSVDB-35878: /modules.php?name=Members_List&letter='%20OR%20pass%20LIKE%20'a%25'/*: PHP Nuke module allows user names and passwords to be viewed. + OSVDB-3092: /sitemap.xml: This gives a nice listing of the site content. + OSVDB-12184: /index.php?=PHPB8B5F2A0-3C92-11d3-A3A9-4C7B08C10000: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F36-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F34-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-12184: /some.php?=PHPE9568F35-D428-11d2-A769-00AA001ACF42: PHP reveals potentially sensitive information via certain HTTP requests which contain specific QUERY strings. + OSVDB-3092: /administrator/: This might be interesting... + OSVDB-3092: /Agent/: This might be interesting... + OSVDB-3092: /includes/: This might be interesting... + OSVDB-3092: /logs/: This might be interesting... + OSVDB-3092: /tmp/: This might be interesting... + ERROR: /servlet/Counter returned an error: error reading HTTP response + OSVDB-3268: /icons/: Directory indexing is enabled: /icons + OSVDB-3268: /images/: Directory indexing is enabled: /images + OSVDB-3299: /forumscalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /forumzcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /htforumcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbcalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-3299: /vbulletincalendar.php?calbirthdays=1&action=getday&day=2001-8-15&comma=%22;echo%20'';%20echo%20%60id%20%60;die();echo%22: Vbulletin allows remote command execution. See link + OSVDB-6659: /kCKAowoWuZkKCUPH7Mr675ILd9hFg1lnyc1tWUuEbkYkFCpCdEnCKkkd9L0bY34tIf9l6t2owkUp9nI5PIDmQzMokDbp71QFTZGxdnZhTUIzxVrQhVgwmPYsMK7g34DURzeiy3nyd4ezX5NtUozTGqMkxDrLheQmx4dDYlRx0vKaX41JX40GEMf21TKWxHAZSUxjgXUnIlKav58GZQ5LNAwSAn13l0w<font%20size=50>DEFACED<!--//--: MyWebServer 1.0.2 is vulnerable to HTML injection. Upgrade to a later version. I understand about the trace and index, but what about the vbulletin and autologin? I've searched, and I can't find any files like that on the server. I have no idea about the "MyWebServer" stuff, the PHP Nuke, or the Netware/servlet stuff-- there's nothing really on the server except a pretty standard Joomla site (updated to the latest version). Any help with these messages and/or what I'm doing wrong is very much appreciated.

  Read the article

• No device file for partition on logical volume (Linux LVM)

  - by Brian

  I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

  Read the article

• Unable to connect to OpenVPN server

  - by Incognito

  I'm trying to get a working setup of OpenVPN on my VM and authenticate into it from a client. I'm not sure but it looks to me like it's socket related, as it's not set to LISTEN, and localhost seems wrong. I've never set up VPN before. # netstat -tulpn | grep vpn Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 127.0.0.1:1194 0.0.0.0:* 24059/openvpn I don't think this is set up correctly. Here's some detail into what I've done. I have a VPS from MediaTemple: These are my interfaces before starting openvpn: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:39482 errors:0 dropped:0 overruns:0 frame:0 TX packets:39482 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3237452 (3.2 MB) TX bytes:3237452 (3.2 MB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:4885284 errors:0 dropped:0 overruns:0 frame:0 TX packets:4679884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:835278537 (835.2 MB) TX bytes:1989289617 (1.9 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:205.[redacted] P-t-P:205.186.148.82 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 I've followed this guide on setting up a basic server and getting a .p12 file, however, I was receiving an error that stated /dev/net/tun was missing, so I created it mkdir -p /dev/net mknod /dev/net/tun c 10 200 chmod 600 /dev/net/tun This resolved the error preventing the service from launching, however, I am unable to connect. On the server I've set up the myserver.conf file (as per the tutorial) to indicate local 127.0.0.1 (I've also attempted with the public IP address, perhaps I don't understand what they mean by local IP?). The server launches without error, this is what the log looks like when it starts: Sun Apr 1 17:21:27 2012 OpenVPN 2.1.3 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Mar 11 2011 Sun Apr 1 17:21:27 2012 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Apr 1 17:21:27 2012 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Sun Apr 1 17:21:27 2012 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Sun Apr 1 17:21:27 2012 TUN/TAP device tun0 opened Sun Apr 1 17:21:27 2012 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500 Sun Apr 1 17:21:27 2012 GID set to openvpn Sun Apr 1 17:21:27 2012 UID set to openvpn Sun Apr 1 17:21:27 2012 UDPv4 link local (bound): [AF_INET]127.0.0.1:1194 Sun Apr 1 17:21:27 2012 UDPv4 link remote: [undef] Sun Apr 1 17:21:27 2012 Initialization Sequence Completed This creates a tun0 interface that looks like this: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And the netstat command still indicates the state is not set to LISTEN. On the client-side I've installed the p12 certs onto two devices (one is an android tablet, the other is an Ubuntu desktop). I don't see port 1194 as open either. Both clients install the cert files and then ask me for the L2TP secret (which was set on the file), but then they oddly ask me for a username and a password, which I don't know where I could possibly get those from. I attempted all of my logins, and some whacky guesses that were frantically pulling at straws. If there's any more information I could provide let me know.

  Read the article

• Active Directory Time Synchronisation - Time-Service Event ID 50

  - by George

  I have an Active Directory domain with two DCs. The first DC in the forest/domain is Server 2012, the second is 2008 R2. The first DC holds the PDC Emulator role. I sporadically receive a warning from the Time-Service source, event ID 50: The time service detected a time difference of greater than %1 milliseconds for %2 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself. Time sync in the domain is configured with the second DC to synchronise using the /syncfromflags:DOMHIER flag. The first DC is configured to sync time using a /syncfromflags:MANUAL /reliable:YES, from a peerlist consisting of a number of UK based stratum 2 servers, such as ntp2d.mcc.ac.uk. I'm confused why I receive this event warning. It implies that my PDC emulator cannot synchronise time with a supposedly reliable external time source, and it quotes a time difference of 5 seconds for 900 seconds. It's worth also mentioning that I used to use a UK pool from ntp.org but I would receive the warning much more often. Since updating to a number of UK based academic time servers, it seems to be more reliable. Can someone with more experience shed some light on this - perhaps it is purely transient? Should I disregard the warning? Is my configuration sound? EDIT: I should add that the DCs are virtual, and installed on two separate VMware ESXi/vSphere physical hosts. I can also confirm that as per MDMarra's comment and best practice, VMware timesync is disabled, since: c:\Program Files\VMware\VMware Tools\VMwareToolboxCmd.exe timesync status returns Disabled. EDIT 2 Some strange new issue has cropped up. I've noticed a pattern. Originally, the event ID 50 warnings would occur at about 1230pm each day. This is interesting since our veeam backup happens at 12 midday. Since I made the changes discussed here, I now receive an event ID 51 instead of 50. The new warning says that: The time sample received from peer server.ac.uk differs from the local time by -40 seconds (Or approximately 40 seconds). This has happened two days in a row. Now I'm even more confused. Obviously the time never updates until I manually intervene. The issue seems to be related to virtualisation and veeam. Something may be occuring when veeam is backing up the PDCe. Any suggestions? UPDATE & SUMMARY msemack's excellent list of resources below (the accepted answer) provided enough information to correctly configure the time service in the domain. This should be the first port of call for any future people looking to verify their configuration. The final "40 second jump" issue I have resolved (there are no more warnings) through adjusting the VMware time sync settings as noted in the veeam knowledge base article here: http://www.veeam.com/kb1202 In any case, should any future reader use ESXi, veeam or not, the resources here are an excellent source of information on the time sync topic and msemack's answer is particularly invaluable.

  Read the article

• Openldap/Sasl/GSSAPI on Debian: Key table entry not found

  - by badbishop

  The goal: to make an OpenLDAP server to authenticate using Kerberos V via GSSAPI Setup: several virtual machines running on freshly installed/updated Debian Squeeze A master KDC server kdc.example.com A LDAP server, running OpenLDAP ldap.example.com The problem: tom@ldap:~$ ldapsearch -b 'dc=example,dc=com' SASL/GSSAPI authentication started ldap_sasl_interactive_bind_s: Other (e.g., implementation specific) error (80) additional info: SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Key table entry not found) One might suggest to add that bloody keytab entry, but here's the real problem: ktutil: rkt /etc/ldap/ldap.keytab ktutil: list slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 2 ldap/[email protected] 2 2 ldap/[email protected] 3 2 ldap/[email protected] 4 2 ldap/[email protected] So, the entry as suggested by the OpenLDAP manual is there allright. Deleting and re-creating both service principal and the keytab on ldap.example.com didn't help, I get the same error. And before I make the keytab file readable by openldap, I get "Permission denied" error instead of the one in the subject. Which implies, that the right keytab file is being accessed, as set in /etc/default/slapd. I have my doubts about the following part of slapd config: root@ldap:~# cat /etc/ldap/slapd.d/cn\=config.ldif | grep -v "^#" dn: cn=config objectClass: olcGlobal cn: config olcArgsFile: /var/run/slapd/slapd.args olcLogLevel: 256 olcPidFile: /var/run/slapd/slapd.pid olcToolThreads: 1 structuralObjectClass: olcGlobal entryUUID: d6737f5c-d321-1030-9dbe-27d2a7751e11 olcSaslHost: kdc.example.com olcSaslRealm: EXAMPLE.COM olcSaslSecProps: noplain,noactive,noanonymous,minssf=56 olcAuthzRegexp: {0}"uid=([^/]*),cn=EXAMPLE.COM,cn=GSSAPI,cn=auth" "uid=$1,ou=People,dc=example,dc=com" olcAuthzRegexp: {1}"uid=host/([^/]*).example.com,cn=example.com,cn=gssapi,cn=auth" "cn=$1,ou=hosts,dc=example,dc=com" A HOWTO at https://help.ubuntu.com/community/OpenLDAPServer#Kerberos_Authentication mentiones vaguely: Also, it is frequently necessary to map the Distinguished Name (DN) of an authorized Kerberos client to an existing entry in the DIT. I fail to understand where in the tree this should be defined, what schema should be used, etc. After hours of googling, it's official: I'm stuck! Please, help. Other things checked: Kerberos as such works fine (I can ssh without using a password to any machine in this setup). That means there should be no DNS-related problems. ldapsearch -b 'dc=example,dc=com' -x works OK. SASL/GSSAPI has been tested using sasl-sample-server -m GSSAPI -s ldap and sasl-sample-client -s ldap -n ldap.example.com -u tom without errors: root@ldap:~# sasl-sample-server -m GSSAPI -s ldap Forcing use of mechanism GSSAPI Sending list of 1 mechanism(s) S: R1NTQVBJ Waiting for client mechanism... C: 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 'GSSAPI' Sending response... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cR Waiting for client reply... C: got '' Sending response... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4= Waiting for client reply... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw=got '?' Negotiation complete Username: tom Realm: (NULL) SSF: 56 sending encrypted message 'srv message 1' S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazx Waiting for encrypted message... C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpcztgot '' recieved decoded message 'client message 1' root@ldap:~# sasl-sample-client -s ldap -n ldap.example.com -u tom service=ldap Waiting for mechanism list from server... S: R1NTQVBJrecieved 6 byte message Choosing best mechanism from: GSSAPI returning OK: tom Using mechanism GSSAPI Preparing initial. Sending initial response... C: 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 Waiting for server reply... S: YIGZBgkqhkiG9xIBAgICAG+BiTCBhqADAgEFoQMCAQ+iejB4oAMCARKicQRvkxggi9pW+yJ1ExbTwLDclqw/VQ98aPq8mt39hkO6PPfcO2cB+t6vJ01xRKBrT9D2qF2XK0SWD4PQNb5UFbH4RM/bKAxDuCfZ1MHKgIWTLu4bK7VGZTbYydcckU2d910jIdvkkHhaRqUEM4cqp/cRrecieved 156 byte message C: Waiting for server reply... S: BQQF/wAMAAAAAAAAMBOWqQcACAAlCodrXW66ZObsEd4=recieved 32 byte message Sending response... C: BQQE/wAMAAAAAAAAFUYbXQQACAB0b20VynB4uGH/iIzoRhw= Negotiation complete Username: tom SSF: 56 Waiting for encoded message... S: AAAASgUEB/8AAAAAAAAAADATlqrqrBW0NRfPMXMdMz+zqY32YakrHqFps3o/vO6yDeyPSaSqprrhI+t7owk7iOsbrZ/idJRxCBm8Wazxrecieved 78 byte message recieved decoded message 'srv message 1' sending encrypted message 'client message 1' C: AAAATQUEBv8AAAAAAAAAABVGG17WC1+/kIV9xTMUdq6Y4qYmmTahHVCjidgGchTOOOrBLEwA9IqiTCdRFPVbK1EgJ34P/vxMQpV1v4WZpczt

  Read the article

• I cut-to-move DCIM folder to ext SD when an auto android OS update popped up b4 I could choose target - Cannot recover 200+ photos

  - by ZeroG

  I was downloading my Exhibit II's DCIM camera folder (with month's of photos inside) to its external SD card, in order to transfer them into my laptop. In my overconfidence, I hurriedly chose cut-to-move (rather than copy-to-move) when KABOOM! —an automatic Android OS update popped up before I could choose the target!!! I figured everything was in cache & calmly tried to go through with the update. But that was not a typically seamless event. It showed downloading icon but hmm… since I rooted the phone it brought the command line up & recovery sequence. But neither Android nor I had yet downloaded any alternate custom ROM Files to internal SD to update from! So were they trying to make me unroot my phone by giving me some bogus update on the fly or just give me a hard time in trying to hand me down an unrooted ROM that I'd have to figure out how to root again? Yes, I know there was that blurb about overwriting a file of the same name but I was trying to shake the darn stubborn update being forced on my phone during this precarious moment. I thought I had frozen or turned off all those auto-updates previously. Anyway, phones are small & fingers are big (sigh)... I tried to reboot into safe mode but the resultant photo file was partially overwritten (200 files had names but Zero bytes in them). I thought maybe it was still hung in cache or deposited somewhere else but I have searched everywhere with file managers. Since I did not have Titanium backing up camera, photo folder or gallery, I cannot recover 200+ photos. Dumb. You can understand my dilemma as I am involved in the arts & although just a camera phone, most of these photos were historic & aesthetic or at least as to subject matter. Photo-ops don't reoccur. I have tried a couple of recovery apps from the market like Search Duplicates & Recover to no avail. I was only able to salvage stuff I'd sent out in messages. I've got several decades in computers & this is such a miserable beginner's piece of bad luck I can't believe it happened to me. They were precious photos! Yes, I turned on Titanium since & yes I even tried USB to laptop recoveries. Being on a MacBookPro I'm trying androidfiletransfer.dmg, but I'd have to upgrade to Peach Sunrise to get above Android 3.0 for that App to recognize the phone via USB & the programmer says installation zeros your data, so that pretty much toasts any secret hidden places where these photos may have been deposited. Don't want to do that & am still trying to find them. They certainly didn't make it to my external SD Card. If any of you techies out there know anything, please help & thanks. Despite decades of being in computing, unfamiliar & ever-changing hard or software can humble even the most seasoned veterans.

  Read the article

• Why is IIS Anonymous authentication being used with administrative UNC drive access?

  - by Mark Lindell

  My account is local administrator on my machine. If I try to browse to a non-existent drive letter on my own box using a UNC path name: \mymachine\x$ my account would get locked out. I would also get the following warning (Event ID 100, Type “Warning”) 5 times under the “System” group in Event Viewer on my box: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: Logon failure: unknown user name or bad password. I would also get the following warning 3 times: The server was unable to logon the Windows NT account 'ourdomain\myaccount' due to the following error: The referenced account is currently locked out and may not be logged on to. On the domain controller, Event ID 680 of type “Failure Audit” would appear 4 times under the “Security” group in Event Viewer: Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: myaccount Followed by Event ID 644: User Account Locked Out: Target Account Name: myaccount Target Account ID: OURDOMAIN\myaccount Caller Machine Name: MYMACHINE Caller User Name: STAN$ Caller Domain: OURDOMAIN Caller Logon ID: (0x0,0x3E7) Followed by another 4 errors having Event ID 680. Strangely, every time I tried to browse to the UNC path I would be prompted for a user name and password, the above errors would be written to the log, and my account would be locked out. When I hit “Cancel” in response to the user name/password prompt, the following message box would display: Windows cannot find \mymachine\x$. Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search. I checked with others in the group using XP and they only got the above message box when browsing to a “bad” drive letter on their box. No one else was prompted for a user name/password and then locked out. So, every time I tried to browse to the “bad” drive letter, behind the scenes XP was trying to login 8 times using bad credentials (or, at least a bad password as the login was correct), causing my account to get locked out on the 4th try. Interestingly, If I tried browsing to a “good” drive such as “c$” it would work fine. As a test, I tried logging on to my box as a different login and browsing the “bad” UNC path. Strangely, my “ourdomain\myaccount” account was getting locked out – not the one I was logged in as! I was totally confused as to why the credentials for the other login were being passed. After much Googling, I found a link referring to some IIS settings I was vaguely familiar with from the past but could not see how they would affect this issue. It was related to the IIS directory security setting “Anonymous access and authentication control” located under: Control Panel/Administrative Tools/Computer Management/Services and Applications/Internet Information Services/Web Sites/Default Web Site/Properties/Directory Security/Anonymous access and authentication control/Edit/Password I found no indication while scouring the Internet that this property was related to my UNC problem. But, I did notice that this property was set to my domain user name and password. And, my password did age recently but I had not reset the password accordingly for this property. Sure enough, keying in the new password corrected the problem. I was no longer prompted for a user name/password when browsing the UNC path and the account lock-outs ceased. Now, a couple of questions: Why would an IIS setting affect the browsing of a UNC path on a local box? Why had I not encountered this problem before? My password has aged several times and I’ve never encountered this problem. And, I can’t remember the last time I updated the “Anonymous access” IIS password it’s been so long. I’ve run the script after a password reset before and never had my account locked-out due to the UNC problem (the script accesses UNC paths as a normal part of its processing). Windows Update did install “Cumulative Security Update for Internet Explorer 7 for Windows XP (KB972260)” on my box on 7/29/2009. I wonder if this is responsible.

  Read the article

• UFW as an active service on Ubuntu

  - by lamcro

  Every time I restart my computer, and check the status of the UFW firewall (sudo ufw status), it is disabled, even if I then enable and restart it. I tried putting sudo ufw enable as one of the startup applications but it asks for the sudo password every time I log on, and I'm guessing it does not protect anyone else who logs on my computer. How can I setup ufw so it is activated when I turn on my computer, and protects all accounts? Update I just tried /etc/init.d/ufw start, and it activated the firewall. Then I restarted the computer, and again it was disabled. content of /etc/ufw/ufw.conf # /etc/ufw/ufw.conf # # set to yes to start on boot ENABLED=yes # set to one of 'off', 'low', 'medium', 'high' LOGLEVEL=full content of /etc/default/ufw # /etc/default/ufw # # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback # accepted). You will need to 'disable' and then 'enable' the firewall for # the changes to take affect. IPV6=no # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW inbound packets on the INPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_INPUT_POLICY="DROP" # Set the default output policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT. # ACCEPT enables connection tracking for NEW outbound packets on the OUTPUT # chain, whereas ACCEPT_NO_TRACK does not use connection tracking. Please note # that if you change this you will most likely want to adjust your rules. DEFAULT_OUTPUT_POLICY="ACCEPT" # Set the default forward policy to ACCEPT, DROP or REJECT. Please note that # if you change this you will most likely want to adjust your rules DEFAULT_FORWARD_POLICY="DROP" # Set the default application policy to ACCEPT, DROP, REJECT or SKIP. Please # note that setting this to ACCEPT may be a security risk. See 'man ufw' for # details DEFAULT_APPLICATION_POLICY="SKIP" # By default, ufw only touches its own chains. Set this to 'yes' to have ufw # manage the built-in chains too. Warning: setting this to 'yes' will break # non-ufw managed firewall rules MANAGE_BUILTINS=no # # IPT backend # # only enable if using iptables backend IPT_SYSCTL=/etc/ufw/sysctl.conf # extra connection tracking modules to load IPT_MODULES="nf_conntrack_ftp nf_nat_ftp nf_conntrack_irc nf_nat_irc" Update Followed your advise and ran update-rc.d with no luck. lester@mcgrath-pc:~$ sudo update-rc.d ufw defaults update-rc.d: warning: /etc/init.d/ufw missing LSB information update-rc.d: see <http://wiki.debian.org/LSBInitScripts> Adding system startup for /etc/init.d/ufw ... /etc/rc0.d/K20ufw -> ../init.d/ufw /etc/rc1.d/K20ufw -> ../init.d/ufw /etc/rc6.d/K20ufw -> ../init.d/ufw /etc/rc2.d/S20ufw -> ../init.d/ufw /etc/rc3.d/S20ufw -> ../init.d/ufw /etc/rc4.d/S20ufw -> ../init.d/ufw /etc/rc5.d/S20ufw -> ../init.d/ufw lester@mcgrath-pc:~$ ls -l /etc/rc?.d/*ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc0.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc1.d/K20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc2.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc3.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc4.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc5.d/S20ufw -> ../init.d/ufw lrwxrwxrwx 1 root root 13 2009-12-20 20:34 /etc/rc6.d/K20ufw -> ../init.d/ufw

  Read the article

• register_globals error in php

  - by user145862

  I was stuck up with the error directive 'register_globals' is no longer available in PHP in unknown on line 0 when tried to check the php version using "php -v" after enabling register_globals in php.ini file. I am not getting any php version info by doing so. Instead it throws the above mentioned error.After turning off this option, php info works quite well. It is very essential for me to have register_globals to be turned on.How can I have this corrected. my php.ini is as follows: ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; http://php.net/request-order request_order = "GP" ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. ; register_globals = On ; Determines whether the deprecated long $HTTP_*_VARS type predefined variables ; are registered by PHP or not. As they are deprecated, we obviously don't ; recommend you use them. They are on by default for compatibility reasons but ; they are not recommended on production servers. ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_long_arrays = Off ; This directive determines whether PHP registers $argv & $argc each time it ; runs. $argv contains an array of all the arguments passed to PHP when a script ; is invoked. $argc contains an integer representing the number of arguments ; that were passed when the script was invoked. These arrays are extremely ; useful when running scripts from the command line. When this directive is ; enabled, registering these variables consumes CPU cycles and memory each time ; a script is executed. For performance reasons, this feature should be disabled ; on production servers. ; Note: This directive is hardcoded to On for the CLI SAPI ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_argc_argv = Off ; When enabled, the SERVER and ENV variables are created when they're first ; used (Just In Time) instead of when the script starts. If these variables ; are not used within a script, having this directive on will result in a ; performance gain. The PHP directives register_globals, register_long_arrays, ; and register_argc_argv must be disabled for this directive to have any affect. ; auto_globals_jit = On

  Read the article

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• Automatically starting svnserve on Snow Leopard

  - by Cleggy

  Note: I originally asked this question on Server Fault (http://serverfault.com/questions/148052/automatically-starting-svnserve-on-snow-leopard), but I thought this may be a more appropriate place to ask. I have installed Subversion onto my iMac running Snow Leopard, but am having trouble getting svnserve to start up automatically. As I understand it (I'm still fairly green with OSX), the best way to do that is to utilize launchd. To that end, I have created the following .plist file in the /Library/LaunchDaemons folder. If I use launchctl to execute this file, svnserve starts as expected, but it doesn't automatically start when the system starts up or I log in. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Disabled</key> <false/> <key>Label</key> <string>org.tigris.subversion.svnserve</string> <key>UserName</key> <string>Dave</string> <key>ProgramArguments</key> <array> <string>/opt/subversion/bin/svnserve</string> <string>--inetd</string> <string>--root=/Users/Shared/SVNrep</string> </array> <key>ServiceDescription</key> <string>Subversion Standalone Server</string> <key>Sockets</key> <dict> <key>Listeners</key> <array> <dict> <key>SockFamily</key> <string>IPv4</string> <key>SockServiceName</key> <string>svn</string> <key>SockType</key> <string>stream</string> </dict> <dict> <key>SockFamily</key> <string>IPv6</string> <key>SockServiceName</key> <string>svn</string> <key>SockType</key> <string>stream</string> </dict> </array> </dict> <key>inetdCompatibility</key> <dict> <key>Wait</key> <false/> </dict> </dict> </plist> I have tried many different configs in the .plist, including auto-starting, simplifying the listeners section, removing dependence on inetd, but they all show the same symptom. The files work when started using launchctl load, but do not automatically start up svnserve if the iMac is rebooted. If anyone here could provide any suggestions as to how to get this to work, I'd really appreciate it.

  Read the article

• bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

  - by leeand00

  I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

  Read the article

• How to understand the memory usage and load average in linux server

  - by Tim

  Hi, I am using a linux server which has 128GB of memory and 24 cores. I use top to see how much it is used. Its output is pasted at the end of the post. Here are two questions: (1) I see that each of the running processes occupies a very small percentage of memory (%MEM no more than 0.2%, and most just 0.0%), but how the total memory is almost used as in the fourth line of output ("Mem: 130766620k total, 130161072k used, 605548k free, 919300k buffers")? The sum of used percentage of memory over all processes seems unlikely to achieve almost 100%, doesn't it? (2) how to understand the load average on the first line ("load average: 14.04, 14.02, 14.00")? Thanks and regards! Edit: Thanks! I also really like to hear some rough numbers based on used percentage of memory to determine if a server is heavily loaded, since I once became the one who cramed the server without understanding the current load. Is swap regarded as almost the same as memory? For example, when memory and swap are almost of same size, if the memory is almost running out but the swap is still largely free, may I just view it as if the used percentage of memory + swap is still not high and run other new processes? How would you consider together CPU or memory (or memory + swap) usage? Do you become worried if either of them reaches too high or both? Output of top: $ top top - 12:45:33 up 19 days, 23:11, 18 users, load average: 14.04, 14.02, 14.00 Tasks: 484 total, 12 running, 472 sleeping, 0 stopped, 0 zombie Cpu(s): 36.7%us, 19.7%sy, 0.0%ni, 43.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 130766620k total, 130161072k used, 605548k free, 919300k buffers Swap: 63111312k total, 500556k used, 62610756k free, 124437752k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6529 sanchez 18 -2 1075m 219m 13m S 100 0.2 13760:23 MATLAB 13210 timothy 18 -2 48336 37m 1216 R 100 0.0 3:56.75 absurdity 13888 timothy 18 -2 48336 37m 1204 R 100 0.0 2:04.89 absurdity 14542 timothy 18 -2 48336 37m 1196 R 100 0.0 1:08.34 absurdity 14544 timothy 18 -2 2888 2076 400 R 100 0.0 1:06.14 gatherData 6183 sanchez 18 -2 1133m 195m 13m S 100 0.2 13676:04 MATLAB 6795 sanchez 18 -2 1079m 210m 13m S 100 0.2 13734:26 MATLAB 10178 timothy 18 -2 48336 37m 1204 R 100 0.0 11:33.93 absurdity 12438 timothy 18 -2 48336 37m 1216 R 100 0.0 5:38.17 absurdity 13661 timothy 18 -2 48336 37m 1216 R 100 0.0 2:44.13 absurdity 14098 timothy 18 -2 48336 37m 1204 R 100 0.0 1:58.31 absurdity 14335 timothy 18 -2 48336 37m 1196 R 100 0.0 1:08.93 absurdity 14765 timothy 18 -2 48336 37m 1196 R 99 0.0 0:32.57 absurdity 13445 timothy 18 -2 48336 37m 1216 R 99 0.0 3:01.37 absurdity 28990 root 20 0 0 0 0 S 2 0.0 65:50.21 pdflush 12141 tim 18 -2 19380 1660 1024 R 1 0.0 0:04.04 top 1240 root 15 -5 0 0 0 S 0 0.0 16:07.11 kjournald 9019 root 20 0 296m 4460 2616 S 0 0.0 82:19.51 kdm_greet 1 root 20 0 4028 728 592 S 0 0.0 0:03.11 init 2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0 0.0 0:01.01 migration/0 4 root 15 -5 0 0 0 S 0 0.0 0:08.13 ksoftirqd/0 5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT -5 0 0 0 S 0 0.0 17:27.31 migration/1 7 root 15 -5 0 0 0 S 0 0.0 0:01.21 ksoftirqd/1 8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root RT -5 0 0 0 S 0 0.0 10:02.56 migration/2 10 root 15 -5 0 0 0 S 0 0.0 0:00.34 ksoftirqd/2 11 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/2 12 root RT -5 0 0 0 S 0 0.0 4:29.53 migration/3 13 root 15 -5 0 0 0 S 0 0.0 0:00.34 ksoftirqd/3

  Read the article

• smartctl -t long isn't finishing

  - by xenoterracide

  I been running smartctl -t long on a drive for about 2 days now and it seems to be stalled at 10%. short and conveyance both passed. I have to send 1 of 2 drives purchased back I found badblocks with badblocks (none on this drive and I'ts made over a pass already). I'm just wondering if I should be concerned about this. smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WMAV51582123 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 10 22:19:52 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (20100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 131 131 021 Pre-fail Always - 6408 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 106 102 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 99 - # 2 Extended offline Interrupted (host reset) 10% 30 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Cisco VPNClient from Mac won't connect using iPhone Tethering

  - by Dan Short

  I just set up iPhone tethering from my Snow Leopard Macbook Pro to my iPhone 3GS with the Datapro 4GB plan from AT&T. When attempting to connect to my corporate VPN from the MacBook Pro with Cisco VPNClient 4.9.01 (0100) I get the following log information: Cisco Systems VPN Client Version 4.9.01 (0100) Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Mac OS X Running on: Darwin 10.6.0 Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386 Config file directory: /etc/opt/cisco-vpnclient 1 13:02:50.791 02/22/2011 Sev=Info/4 CM/0x43100002 Begin connection process 2 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0AD337FF, Src Addr: 0x0AD33702 (DRVIFACE:1158). 3 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0A2581FF, Src Addr: 0x0A258102 (DRVIFACE:1158). 4 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100004 Establish secure connection using Ethernet 5 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100024 Attempt connection with server "209.235.253.115" 6 13:02:50.792 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (500). 7 13:02:50.793 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (4500). 8 13:02:50.793 02/22/2011 Sev=Info/6 IKE/0x4300003B Attempting to establish a connection with 209.235.253.115. 9 13:02:51.293 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 10 13:02:51.894 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 11 13:02:52.495 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 12 13:02:53.096 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 13 13:02:53.698 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 14 13:02:54.299 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. 16 13:02:54.299 02/22/2011 Sev=Warning/2 IKE/0xC300009A Failed to set up connection data 17 13:02:54.299 02/22/2011 Sev=Info/4 CM/0x4310001C Unable to contact server "209.235.253.115" 18 13:02:54.299 02/22/2011 Sev=Info/5 CM/0x43100025 Initializing CVPNDrv 19 13:02:54.300 02/22/2011 Sev=Info/4 CVPND/0x4340001F Privilege Separation: restoring MTU on primary interface. 20 13:02:54.300 02/22/2011 Sev=Info/4 IKE/0x43000001 IKE received signal to terminate VPN connection 21 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700008 IPSec driver successfully started 22 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 23 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000D Key(s) deleted by Interface (192.168.0.171) 24 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 25 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 26 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 27 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000A IPSec driver successfully stopped The key line is 15: 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. I can't find anything online about this. I found a single entry for the error message in Google, and it was a swedish (or some other nordic language site) that didn't have an answer to the question. I've tried connecting through both USB and Bluetooth tethering to the iPhone, and they both return the exact same results. I don't have direct control over the firewall, but if changes are necessary to make it work, I may be able to get the powers-that-be to make adjustments. A solution that doesn't require reconfiguring the firewall would be far better of course... Does anyone know what I can do to make this behave? Thanks, Dan

  Read the article

• TV not detected by Windows/VGA - when there is a WHDI device in the signal chain

  - by ashwalk

  I'm at my wit's end with this one... I had an EVGA GTS 250, and I used to plug it's HDMI out into a WHDI sender, which transmitted to its corresponding WHDI receiver 15ft away, which then connected to a Samsung LN40D LCD TV through another HDMI cable. PC/VGA < [hdmi cable] < WHDI sender <[air] WHDI receiver < [hdmi cable] < TV It was perfect, stable, no perceivable latency. I just plugged everything the first time and it worked instantly. It sent 5.1 audio, and Windows/nVidia Control Center detected the TV by its name. The WHDI device is this one: http://goo.gl/Q8iWI5 Now I bought an EVGA GTX 650, and WHDI doesn't work anymore. Both Windows and nVidia Control Center won't detect the TV, only the monitor that's connected via DVI. The TV screen shows "TX202913 connected. Check video signal." on top of a black screen. Though the device is not the problem itself, just the fact that it's not allowing direct connection between PC and TV. I would bet that if put an AVR in its place I'd also have this issue. The HDMI on this new card works with other monitors. If I put the older card back, WHDI works normally. I have googled this for 5 months on and off. Once I bumped into a page that showed how to force a display device to always-on through registry edit. Once I restarted windows, the Tv (through WHDI) displayed my expanded or duplicated desktop at 1024x768 ONLY, and listed the display as "digital display". I could not change the resolution and it wouldn't playback audio (although the option was available at nVidia Control Center HDMI audio options, but did not work). This proves that there is no conflict between the devices, except that software-wise, Windows cannot, for the life of it, understand that there's a TV there to send video/audio to. Since this won't do (no audio, poor video), I reverted this regedit. It's also not an EDID problem within the TV, since when connected directly it works. The last weird bit of this saga is that today, I reminded of Windows' "Add Device" dialog, gave it a go, and a "Samsung Generic UPNP TV" showed up, which I promptly installed the drives for, rising to a climax of... ...NOTHING HAPPENING. As far as I can tell, it really didn't change anything other than using up a few kb in my main disc. I should also say that I looked a LOT into handshake problems and nothing applied either. Do any of you have an idea of what may be going on? I can't stand the thought of having a us$200 device not working because of the addition of a newer graphics card, when the much older one had no issues. There is absolutely NO REASON for this to happen. There is NO documentation on WHDI online. Apparently no one buys this stuff. For the same reason, no one responded to this same plea for help on NVidia and EVGA forums. Worst case, this can be a warning about this setup for people in the future. Thanx in advance.

  Read the article

• Reuse remote ssh connections and reduce command/session logging verbosity?

  - by ewwhite

  I have a number of systems that rely on application-level mirroring to a secondary server. The secondary server pulls data by means of a series of remote SSH commands executed on the primary. The application is a bit of a black box, and I may not be able to make modifications to the scripts that are used. My issue is that the logging in /var/log/secure is absolutely flooded with requests from the service user, admin. These commands occur many times per second and have a corresponding impact on logs. They rely on passphrase-less key exchange. The OS involved is EL5 and EL6. Example below. Is there any way to reduce the amount of logging from these actions. (By user? By source?) Is there a cleaner way for the developers to perform these ssh executions without spawning so many sessions? Seems inefficient. Can I reuse the existing connections? Example log output: Jul 24 19:08:54 Cantaloupe sshd[46367]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46446]: Accepted publickey for admin from 172.30.27.32 port 33526 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46446]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46475]: Accepted publickey for admin from 172.30.27.32 port 33527 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46475]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46504]: Accepted publickey for admin from 172.30.27.32 port 33528 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46504]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46583]: Accepted publickey for admin from 172.30.27.32 port 33529 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46583]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:54 Cantaloupe sshd[46612]: Accepted publickey for admin from 172.30.27.32 port 33530 ssh2 Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:54 Cantaloupe sshd[46612]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46641]: Accepted publickey for admin from 172.30.27.32 port 33531 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46641]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46720]: Accepted publickey for admin from 172.30.27.32 port 33532 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46720]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46749]: Accepted publickey for admin from 172.30.27.32 port 33533 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46749]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46778]: Accepted publickey for admin from 172.30.27.32 port 33534 ssh2 Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session opened for user admin by (uid=0) Jul 24 19:08:55 Cantaloupe sshd[46778]: pam_unix(sshd:session): session closed for user admin Jul 24 19:08:55 Cantaloupe sshd[46857]: Accepted publickey for admin from 172.30.27.32 port 33535 ssh2

  Read the article

• Fix overscan in Linux with Intel graphics Vizio HDTV

  - by Padenton

  I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

  Read the article

• How can I work around problems with certificate configuration in Remote Desktop Services?

  - by Michael Steele

  I am setting up a Remote Desktop Services farm, and am having trouble configuring certificates for it to use. A demonstration of the problem I'm seeing can be found in Step #4. At this point I am convinced that there are problems with the user interface, and am looking for ways around them. Is there any way to configure certificates in Remote Desktop Services so that the settings hold and are reflected in the GUI? If not, is there any way for me to verify that the settings are correct? Step #1 - Create certificate to be used. I've configured a certificate to use with RD Web Access. The certificate is stored with in the Certificates MMC on my RD Connection Broker, and I am configuring the farm from that computer. I found by letting RD Web Access generate its own certificate that the following properties are required: Enhanced Key Usage Server Authentication Client Authentication This may not be required, but the self-signed certificate includes it. Key Usage Digital Signature Key Agreement Subject Alternative Name DNS Name=domain.com Detour about self-signed certificate generation As a quick detour, I was able to work around a problem with creating self-signed certificates using powershell. The documentation for the New-RDCertificate cmdlet gives the following example: PS C:\> $password = ConvertTo-SecureString -string "password" -asplaintext -force New-RDCertificate -Role RDWebAccess -DnsName "test-rdwa.contoso.com" -Password $password -ConnectionBroker rdcb.contoso.com -ExportPath "c:\test-rdwa.pfx" Typing this into the shell will result in an error message claiming that a function, Get-Server cannot be found. Prior to using New-RDCertificate, you must import the RemoteDesktop Module with Import-Module RemoteDesktop. Step #2 - Observe out-of-box behavior The first time you visit the Deployment Properties dialog box by navigating to Server Manager - Remote Desktop Services - Collections and selecting "Edit Deployment Properties" from the "TASKS" dropdown list in the "COLLECTIONS" grouping, you will see the following screen: This window is misleading because the level field is listed as "Not Configured". If I understand correctly all three of the role services are using a self-signed certificate. For the RD Web Access role this can be verified by visiting the website: The certificate being used also appears in the Certificates MMC: Step #3 - Assign new certificate The Deployment Properties dialog box will allow me to select my existing certificate. The certificate must be placed within the local computers Certificates MMC in the "Personal" certificate store. The private key will need to be exportable, and you will need to provide the password. I temporarily exported my certificate to a file named temp.pfx with a password, and then imported it into Remote Desktop Services from there. Once this is done the GUI will indicate that it is ready to accept the new configuration. Once I click the "Apply" button, the GUI indicates success. This can be verified by visiting the RD Web Access web site a second time. There is no certificate error. Step #4 - The GUI fails to maintain its state If the GUI is closed and reopened, all of these settings appear to be lost. Actually, the certificate I configured is still being used. I am able to continue accessing the RD Web Access site without any certificate errors. Oddly, if I use the "Create new certificate..." button to generate a self-signed certificate this window will update to an "Untrusted" level. This setting will then be maintained through the opening and closing of the Deployment Properties dialog box. Is there anything I can do to have my settings appear to stick? I feel like something is wrong when the GUI claims I haven't fully configured certificates.

  Read the article

• FreeBSD with Vagrant - don't know how to check guest additions version

  - by joelmaranhao

  On Mac OS X 10.9.3 Picked a box from the VagrantCloud Init the vagrant box $ vagrant init chef/freebsd-9.2-i386 A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on `vagrantup.com` for more information on using Vagrant. List the files $ ls -al -rw-r--r-- 1 joel staff 4831 Jun 5 17:17 Vagrantfile Vagrantfile content VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| config.vm.box = "chef/freebsd-9.2-i386" end Starting my virtual box leads to Errors $ vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Box 'chef/freebsd-9.2-i386' could not be found. Attempting to find and install... default: Box Provider: virtualbox default: Box Version: >= 0 ==> default: Loading metadata for box 'chef/freebsd-9.2-i386' default: URL: https://vagrantcloud.com/chef/freebsd-9.2-i386 ==> default: Adding box 'chef/freebsd-9.2-i386' (v1.0.0) for provider: virtualbox default: Downloading: https://vagrantcloud.com/chef/freebsd-9.2-i386/version/1/provider/virtualbox.box ==> default: Successfully added box 'chef/freebsd-9.2-i386' (v1.0.0) for 'virtualbox'! ==> default: Importing base box 'chef/freebsd-9.2-i386'... ==> default: Matching MAC address for NAT networking... ==> default: Checking if box 'chef/freebsd-9.2-i386' is up to date... ==> default: Setting the name of the VM: freebsd92-i386_default_1401982167145_49633 ==> default: Fixed port collision for 22 => 2222. Now on port 2201. ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2201 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2201 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! Sorry, don't know how to check guest version of Virtualbox Guest Additions on this platform. Stopping installation. ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.2.16 default: VirtualBox Version: 4.3 ==> default: Mounting shared folders... default: /vagrant => /Users/joel/Code/anybots/operations/robot/freebsd92-i386 Vagrant attempted to execute the capability 'mount_virtualbox_shared_folder' on the detect guest OS 'freebsd', but the guest doesn't support that capability. This capability is required for your configuration of Vagrant. Please either reconfigure Vagrant to avoid this capability or fix the issue by creating the capability. Note that I have recently installed the latest version of VirtualBox, but somehow I can't find the Guest Additions.

  Read the article

< Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >