Search Results

Search found 28828 results on 1154 pages for 'i heart ubuntu'.

Page 901/1154 | < Previous Page | 897 898 899 900 901 902 903 904 905 906 907 908  | Next Page >

• brother MFC-J435W wireless scanning issue

  - by ogreen32

  Thanks for taking the time to read this. I have a brother MFC-J435W and I was able to get the printer set up for wireless printing, but it is not allowing me to scan wirelessly. It gives me the message to "check connection". I'll tell you what I've done so far and maybe someone can help me out. I've installed the scanner driver and scan tool I installed Xsane (to see if it would allow the scanner to communicate with the computer and that didn't help). I've tried restarting the computer. After those things I am now at a loss as to where to go from here. Any help would be great. Thanks. I've also searched for this question in the Brother FAQ as well as on here and I haven't found an answer. Thanks again.

  Read the article

• User login cycles

  - by Doug Brown

  Just install 12.04-64bit and while I can login using the guest login, I cannot with my user login: it just cycles back to the login screen. I have performed the sequence of apt-get update/upgrade and install of the nvidia-current driver, but got back that it was already in use. The password appears to be recognized, as wrong one results in an error. Have also tried switching to the 2D Unity, without other results.

  Read the article

• How to dynamically generate PDF documents

  - by Thomas

  I want to build a web application for generating stylish PDF documents. The layout should be based on a design templates and the data should come dynamically from the database. Ideally I want to design the template in a "publishing like" tool with placeholders and replace these placeholders by the web application with the data from the database. Think of something like an invoice generator, where a customer could choose from different invoice templates and the invoice data itself coming from the DB. Thanks for your ideas!

  Read the article

• Lost desktop settings in KDE

  - by Luke

  After next unsuccessful attempt to install ATI fglrx drivers, when I also changed GRUB config a bit (GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=0 and GRUB_CMDLINE_LINUX="nomodeset"). When I restored everything to default (uninstalled fglrx, restored default values in GRUB config and xorg.conf) KDE logged me into completely new desktop, with (I suppose) default configuration. Is there a way to restore my previous desktop settings? What could be the cause? SOLVED: Something was messed out with display settings. Search for 'Display Configuration' and there deselect one display. Or is there a better option?

  Read the article

• RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

  - by user212475

  I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

  Read the article

• User script at logout

  - by GUI Junkie

  The problem: I'm sharing a directory with my wife. I've placed us both in a 'shared' group and the directory belongs to the 'shared' group as well. Whenever one of us creates a file, this file belongs to user:user, instead of user:shared... The solution: I can do sudo chown, but my wife can't. So, I want to run a script when I logout of the session. If I understand correctly, the startup scripts go in /etc/init.d/ and the runlevel scripts go /etc/rc0.d/ where 0 is the runlevel (0-6). Do the runlevel scripts execute only on exit/logout? Do these depend on the user, that is, I'd like to run it only for my user (not so important in this case, mind)? Should I place the script somewhere else? Also, I imagine that the script will be run by root, so there's no need for sudo within the script, is that correct?

  Read the article

• Banshee keeps copying the same music files to my portable player over and over

  - by Dave M G

  I have Banshee 2.6.0, and I connect my Android phone by USB to sync my music collection of about 1500 songs. For the most part, it works reliably. However, on every sync, it deletes, and then recopies the same 62 songs each time. After that, everything works, and the sync completes successfully. As far as I can tell, these 62 songs are mostly recent additions to my collection, but not all of them, and I can't see any other commonality of significance. This is only a problem because the transfer speed when working within Banshee is quite slow, so this is eating up time. Sometimes I need to make a transfer and go, but I can't, because I'll have to wait for progress bars take their sweet time. I have tried to completely clear out the music files on the phone and resync. I have tried rescanning the music collection. What do I do to fix this irritation?

  Read the article

• Which drivers do I need for Ethernet and CAN bus on Intel Tolapai?

  - by Hanno Fietz

  I've installed 10.04 Server on an embedded machine (NISE 110 by Nexcom) and the builtin Ethernet and CAN-bus controllers don't work out of the box. The controller seems to be an Intel EP80579 chipset for both, according to lspci. I tried Intel's product website, where they seem to have FreeBSD drivers only. There's also drivers for RedHat, but I'm struggling with the manual build required to get them to work. Googling so far didn't get me anywhere. Which drivers do I need, and where do I get them?

  Read the article

• Unity in 12.10 comes up behind other windows

  - by ams

  I've just upgraded from 12.04 to 12.10. For the most part, everything works fine, but I have a few small problems with Unity, or maybe Compiz. When I hit the Super key, or click on the dash launcher, the dash sometimes comes up behind the other windows on the screen. As you can imagine, this makes it somewhat tricky to use. Once it has started coming up behind, no amount of trying again will convince it to come back to the front. Possibly related, the Alt-Tab switcher doesn't show either. It maybe that there isn't one, or maybe that's behind also? Alt-Tab does switch the windows, but there's no visual indicator. When I hit Super-W, the windows do all do the zoom thing, but it's slow and juddery where it used to be smooth in 12.04. I'm using the standard "radeon" driver, same as before, with a triple-head monitor setup (and that works fine). I've not tried the proprietary drivers as I've previously found the multi-monitor support much weaker than the default driver, but maybe that's the way to go now? Video play fine. Even WebGL seems ok. Do other see this problem? Is it a bug? Or have I just got some left-over config from 12.04 in the way?

  Read the article

• Setting to protect gnome-terminal from key logging

  - by yanychar

  Looks like it is easy to log keystrokes of all processes of the same user. A basic keylogger is 'xinput'. xinput test-xi2 The command generates log of all key-presses. Unfortunately, this includes passwords in gnome-terminal. Googling suggested that grabbing keyboard may prevent other windows from capturing key strokes. Is there a way to prevent XI2 logging in gnome-terminal? Or is there an X terminal that has this feature?

  Read the article

• How file permissions are stored in inode?

  - by Debadyuti Maiti

  Suppose there's two pc - "A" and "B". Then if A downloads a files from B , then what would be the file permission of that downloaded file? Is it possible that the downloaded file in A will have an Inode entry with all it's permissions from B & store B's user account as the owner ? If that's the case then is it impossible to change that files permission on A if "others" [as in user-group-others] doesn't have the right to write on that file? e.g. if this is the case , __x __x __x file.txt [On B] then what would be the file permission on A of that same file downloaded from B [e.g. through vsftpd]? __x __x __x file.txt [On A] or rw_x rw_x rw_x file.txt [On A] [i.e. defined by A's default umask value]

  Read the article

• Mouse cursor lag after lock screen, 64 bit 12.04

  - by Bill Jones

  Recently I have noticed that when I return to my computer after it has been "locked" for a while, the mouse pointer has significant lag. The cursor position appears to only update a few times a second. Moving the mouse results in the pointer "following" the movement in a jerky kind of way, and then continuing for some fraction of a second after I have stopped using the mouse. Replacing the mouse has no effect. (I have two differently branded and constructed usb optical mice). Plugging either mouse into a different usb port has no effect. Once the problem was resolved by "suspending" the system, and then re-starting it with the power switch, but this does not work every time. So far, the only fool-proof fix is to shut the system down and re-start it (re-boot). I have tried this suggested fix. It had no effect.

  Read the article

• ERROR CHECKING !!

  - by moata_u

  am trying catch any error when run command in order to write an log file / report i was trying write this code : FUNCTION FOR VALIDATION function valid (){ if [ $? -eq 0 ]; then echo "$var1" ": status : OK" else echo "$var1" ": status : ERROR" fi COMMAND FUNCTION function save(){ sed -i "/:@/c connection.url=jdbc:oracle:thin:@$ip:1521:$dataBase" $search var1="adding database ip" valid $var1 sed -i "/connection.username/c connection.username=$name" #$search retval=$? var1="addning database SID" valid $var1 $retval } save OUTPUT adding database ip : status : OK sed: no input file i want out put in this way: adding database ip : status : OK sed: no input file : status : ERROR" (OR) adding database ip : status : OK addning database SID : status : ERROR" I was tried toooo much but not working with me :(((

  Read the article

• how to find 3g modem signal strength with out AT commands?

  - by neckTwi

  when i try to find signal strength of my modem using AT+CSQ, the usb device is locked by the network manager. To find the signal strength with AT+CSQ i have to first disable network connection using #nmcli nm wwan off to unlock the device inode /dev/ttyUSBX. Is there any nmcli option to get signal strength or any other option? EDIT The gdbus object for NetworkManager don't have any method like getSignalStrength. Network manager is locking device file preventing to use AT commands. nm-applet was able to display signal strength in system tray. so there should be a way to get signal strength form network manager! nmcli is command line counter part of nm-applet. Can i get signal strength using nmcli? nothing about signal strength is mentioned in its man pages.

  Read the article

• Can't install NetBeans

  - by João Vinholi

  I had never had problems with netbeans installation, but now I am. I have downloaded JDK and JRE properly as I always do and I have started the installation using the terminal as well. When the screen for JDK directory selection comes, I select the JDK folder that I have downloaded, but for some reason the following warning is shown: "An error occurred while validating the path." Do you know what could be?

  Read the article

• New user to Linux Mint and Alinux

  - by Richard

  which is better for a new Linux user, Linux Mint or Alinux i had trouble getting Alinux to run after install Mint ran fine. We are also with the Tucson Refugee ministry and we have computers given to us all the time then we reload the OS clean it up then we give them to the refugee families. We need something that will run on older computers with 256 or 512m of ram, and i do not want to use Micro Soft Please help. PS is there any other Linux OS you would recommend?????? Thanks Richard Smith [email protected]

  Read the article

• Text box select issue

  - by Kent Boogaart

  I have this issue where the entire text in text boxes is selected whilst I'm typing in it. For example, in FireFox search box I'd try to type "foo" but end up with "o" because I managed to type "fo" before everything was selected, and then typed "o" which replaced the "fo". When it happens, it is incessant - not just a one-off. But it doesn't happen all the time, and I haven't managed to figure out what causes it to start and stop. Is this a known problem with an easy solution? EDIT: this has nothing to do with touchpad. I get this occasionally even on a machine without one. I can usually rectify the issue just be alt-tabbing about a few times.

  Read the article

• Dual nVidia GPUs (3 monitors) not working in 11.10

  - by jasonmclose

  after searching I have not found a solution. I have 2 nvidia quadro 295 cards with 3 monitors but I can not extend twinview across multiple GPUs. I have the most recent nvidia proprietary drivers installed, and they work fine for the single GPU / dual monitors. I tried using xinerama, but without success. I don't mind switching to the nouveau drivers if that would handle my multiple monitors, although I would like to continue to use unity and compiz if i can).

  Read the article

• Step by step guide to partition an external HDD in two file formats

  - by Mysterio

  I just purchased an external HDD (1TB) which I want to partition with two different file formats - NTFS and FAT32 (this partition is for my PS3 backups). At the moment it's a giant 943mb NTFS partition and at the end of the operation I want it to be like: 643 MB NTFS partition (as my main partition) 300 MB FAT32 partition (to house my PS3 backups) Please can someone help me out? Thanks in advance.

  Read the article

• Unable connect to android phone using bluetooth

  - by archerry

  How do I connect my laptop to my HTC Wildfire through bluetooth? The laptop is running xubuntu 11.10, and I have updated Blueman to version 1.23 through their launchpad PPA. The phone is running android version 2.2.1. I can 'pair' and 'trust' the phone, but I can neither 'send files to device...' nor 'browse files on device...' I am able to connect and browse the phone using my netbook running xubuntu 10.04 and blueman version 1.21.

  Read the article

• Record and display Kinect audio and video via avconv

  - by ThomasH

  I'm trying to record audio and video from a Kinect using avconv but I seem to have trouble specifying the right options. avconv -f video4linux2 -video_size 640x480 -c:v h264 -c:a ac3 -i /dev/video1 test.mp4 results in: avconv: /build/buildd/libav-extra-0.8.3ubuntu0.12.04.1/libav/libavutil/mathematics.c:79: av_rescale_rnd: Assertion `c > 0' failed. Aborted (core dumped) Cheese is perfectly happy recording the audio and video from the Kinect, so it's not a setup issue. For added fun, I also need to display the video at the same time.

  Read the article

• wlan0 (WPA2) doesn't work when configured manually

  - by 71GA

  I have been trying to reconfigure my eth0 and wlan0 interfaces by editing /etc/network/interfaces file as folows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.11 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 auto wlan0 iface wlan0 inet static address 192.168.1.10 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 wpa-driver wext wpa-ssid lausi wpa-ap-scan 2 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk 8952a447c860d13847ba1cabd15314ba9caf2fb207f19598f90c43fcd43c0d97 But my wireless doesnt work when i use command /etc/init.d/networking restart and when i do this i get an error: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... RTNETLINK answers: File exists Failed to bring up eth0. ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument RTNETLINK answers: File exists Failed to bring up wlan0. Although it clearly states that my eth0 interface couldn't be brought to life it is working! But i cant say this for the wlan0 interface which doesn't even work if i unplug internet cable and again use command /etc/init.d/networking restart. This seems weird to me... When i use ìfconfig -a command i get an output which confirms that wlan0 isnt working and eth0 is. ziga@ziga-cq56:/etc/network$ ifconfig -a eth0 Link encap:Ethernet HWaddr 60:eb:69:6f:5f:69 inet addr:192.168.1.11 Bcast:192.168.1.13 Mask:255.255.255.0 inet6 addr: fe80::62eb:69ff:fe6f:5f69/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6764 errors:0 dropped:0 overruns:0 frame:0 TX packets:6641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5932190 (5.9 MB) TX bytes:1331846 (1.3 MB) Interrupt:42 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:0 frame:0 TX packets:1759 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107772 (107.7 KB) TX bytes:107772 (107.7 KB) wlan0 Link encap:Ethernet HWaddr 70:f3:95:e7:57:cc inet addr:192.168.1.10 Bcast:192.168.1.12 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) How can i make my wlan0 interface work? It had been working previously with network manager and wicd...

  Read the article

• Cron prepending filename to script output

  - by Caitifty

  I'm having an issue with unwanted lines being added to files output by a cron job. I have a script in /etc/cron.hourly which selects some data from a mysql database and saves it in a text file in /var/www. When I run the script as root, it does exactly what I expect it to do. When the script is executed by cron, it creates the same file, but prepends the following three lines at the top of the output file: :::::::::::::: /var/www/outputfilename :::::::::::::: I can't for the life of me work out how to stop this unwanted behavior. The line in /etc/crontab for cron.hourly is the default "44 * * * * root cd / && run-parts --report /etc/cron.hourly". If I use su to change to being root and do "cd / && run-parts --report /etc/cron.hourly" the script runs as expected and the output doesn't have the mysterious additional 3 lines. I've also tried removing the --report flag from the run-parts command in case that was somehow connected, but no joy. Finally, perusing the cron log output in /var/log/syslog just says cron.hourly ran without giving any additional information. Any suggestions on solving this weird problem most welcome..

  Read the article

• Why is apt-get failing to update with "not a bzip2 file" errors?

  - by klox

  Yesterday my server still OK, but today after try to sudo apt-get update i got this error: update process. I try: sudo rm /var/lib/apt/lists/* -vf And got This.Then try update again, but it's not solving my problem then show May be still same error. I checked my internet connection try ping google.com, get result : PING google.com (74.125.235.40) 56(84) bytes of data. From 136.198.117.254: icmp_seq=1 Redirect Network(New nexthop: fw1.jvc-jein.co.id (136.198.117.6)) 64 bytes from sin01s05-in-f8.1e100.net (74.125.235.40): icmp_req=1 ttl=53 time=20.6 ms 64 bytes from sin01s05-in-f8.1e100.net (74.125.235.40): icmp_req=2 ttl=53 time=18.2 ms 64 bytes from sin01s05-in-f8.1e100.net (74.125.235.40): icmp_req=3 ttl=53 time=33.0 ms 64 bytes from sin01s05-in-f8.1e100.net (74.125.235.40): icmp_req=4 ttl=53 time=30.0 ms 64 bytes from sin01s05-in-f8.1e100.net (74.125.235.40): icmp_req=5 ttl=53 time=28.1 ms

  Read the article

• LibreOffice prints everything half size

  - by oldmankit

  Ever since I printed a document from Evince in landscape orientation, LibreOffice Calc / Writer refuses to print anything correctly. It is scaling everything by 0.5x and rotating it. To get the same effect, go to print - page layout tab - pages per sheet = 2. However, I don't want 2. I want 1. I have wizzed through all of the printing options a few times but can't get to the bottom of this. I've restarted my printer and computer several times. I have done sudo apt-get purge libreoffice* and reinstalled again. Still it will not print full size. (Of course I have checked that the page settings are set to A4 and portrait.) Update: this problem is specific to one printer only, to printing from within LibreOffice (Calc, Writer). With other printers / programs I have no problems.

  Read the article

< Previous Page | 897 898 899 900 901 902 903 904 905 906 907 908  | Next Page >