Search Results

Search found 24935 results on 998 pages for 'test utilities'.

Page 906/998 | < Previous Page | 902 903 904 905 906 907 908 909 910 911 912 913  | Next Page >

• DNSBL listed at zen.spamhaus.org - cant get outgoing mail working? Am I interpreting the response correctly?

  - by Joe Hopfgartner

  I have problem with a mailserver and there is something I kind of not understand! I can connect, authenticate, specify the sender address - but when specifying the reciever i get a error 550 which looks like so: RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 Now the strange thing is that 62.178.15.161 is my local client address. Not the servers ip address. Also the error code 550 seems to be defined as so: 550 Requested action not taken: mailbox unavailable To me that makes totally no sense. Why this error code with this spamhaus message? Why the local ip adress and not the servers? There is exim running and there is nothing turning up in the logs mail.err mail.info mail.log mail.warn in /var/log I looked up both the servers and the clients ip adress on blacklists. The clients ip adress is listed on some (as expected), but the server is totally clean. Here is the complete telnet log when I reproduced the error. Mail clients like Evolution and Thunderbird give me the same spamhaus error message. joe@joe-desktop:~$ telnet mail.hunsynth.org 25 Trying 193.164.132.42... Connected to mail.hunsynth.org. Escape character is '^]'. 220 hunsynth.org ESMTP Exim 4.69 Sat, 01 Jan 2011 17:52:45 +0100 HELP 214-Commands supported: 214 AUTH STARTTLS HELO EHLO MAIL RCPT DATA NOOP QUIT RSET HELP EHLO AUTH 250-hunsynth.org Hello chello062178015161.6.11.univie.teleweb.at [62.178.15.161] 250-SIZE 52428800 250-PIPELINING 250-AUTH PLAIN LOGIN CRAM-MD5 250-STARTTLS 250 HELP AUTH LOGIN 334 VXNlcm5hbWU6 dGVzdEBodW5zeW50aC5vcmc= 334 UGFzc3dvcmQ6 ***** 235 Authentication succeeded MAIL FROM:[email protected] 250 OK RCPT TO:[email protected] 550-DNSBL listed at zen.spamhaus.org 550 http://www.spamhaus.org/query/bl?ip=62.178.15.161 quit 221 hunsynth.org closing connection Connection closed by foreign host. joe@joe-desktop:~$ Update: I tried the same thing from my other server and could successfully send an email. So it really looks like the server does check the IP wich establiches the connection is in some blacklist. This is theoretically a good thing - but - the authentication on the server should prevent that? Or shouldn't it? Well I just think it would be absurd if I couldn't send email over my smtp server from my dynamic ISP connection because the dynamic is listed, altough i have a clean server with login?

  Read the article

• Need help making an ODBC MySQL Connection

  - by Andy Moore

  Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

  Read the article

• Windows Vista: Networking can only connect "local only"

  - by Damien

  I am attempting to debug a problem on a Windows Vista laptop - not mine! Until just recently (last week or so), it was operating normally for about 4 years :) The problem is that I am having issues connecting to the local network (a basic wireless home router; more later) and the internet (via ADSL). This is both for wired [Broadcom chipset] and wireless [Intel chipset]. I will elaborate further later. To detail the network. I have three other clients (HTC phone, Ubuntu 12.04 desktop [wired] and Ubuntu 10.04 laptop [wireless]), all of whom are able to connect to the network and internet normally. A windows 7 virtual machine running on said desktop connects normally. I have tried two different wireless routers - Netgear DG834G and Netgear DGN3500. The same error mode is common to both. Updating the firmware to the latest on both routers does not help. Overall, it seems safe to say it's localised to the laptop in question. I do not have another Vista client to test with. The specific symptoms are as follows: When "connected", it says "Local Only", and says it cannot connect to the internet. This is true for both wired and wireless. It can get an IP address (192.168.0.5), and the router (192.168.0.1) reports that it can see the device. When I try to ping, I get the following results: ping 192.168.0.1 - (router) all packets lost ping 192.168.0.5 - (laptop's address) OK ping 192.168.0.4 - (desktop) all packets lost Pinging from the desktop to the problematic laptop results in "From 192.168.0.4 icmp_seq=1 Destination Host Unreachable" The most promising "fix" from trawling forums is KB928233 which does not work for me. The problem is persistent across reports (both full shutdown and hibernate) so it appears not to be sleep related. I am not a regular vista user, though I can fumble my way about a bit. Is there any other suggestions as to what I should do? Is there any further information I can provide?

  Read the article

• All the Gear and No Idea: Suggestions for re-designing my home/office/entertainment network

  - by 5arx

  Help/ Advice/ Suggestions please: I have a load of kit that I love but which currently operate in disconnected, sometimes counter-productive way. Because I never really had a masterplan I just added these things one after another and connected them up in ad hoc ways. Since I bought my Macbook I've found I spend much less time on the MacPro that was until then my main machine. Perversely, as my job involves writing .Net software, I spend a lot of Mac time actually inside a Windows 7 VM. I stream media from the HP box to the PS3 and thus to the TV, but its not without its limitations/annoyances. We listen to each other's iTunes libraries but the music files are all over the place and it would be good to know they were all safely in one location (and fully backed up). I need to come up with a strategy that will allow me to use all the kit for work, play (recording live music, making tunes, iMovie work), pushing/streaming media to the TV and sharing files with my other half (she uses a Windows laptop and her iPod touch). Ideally I'd like to be able to work on any of the machines and have a shared homedrive that was visible to all machines so all my current files were synced up wherever i was. It would be great if I could access everything securely and quickly over the web. I'd also like to be able to set up a background backup process. The kit list thus far: Apple MacPro 8GB/3x250GB RAID0 + 1TB Apple MacBook Pro 13" 8GB/250GB - I spend a lot of my work time on a Windows 7 VM on this. Crappy Acer laptop (for children's use - iPlayer, watching movies/tv files) HP Proliant Server 4GB/80GB+160GB+300GB Sun Ultra 10 2 x 80GB (old, but in top-notch condition) PS3 160GB iPod Classic 2 x 8GB iPod Touch Observations: Part of the problem is our dual use of Windows and OS X - we can't go for a pure NT style roaming profile. Because the server is also used for hosting test/beta applications and a SQL Server db, it can't be dedicated to file serving. The two Macs really could do with sharing a roaming profile or similar. I'd love to be able to do something useful with the Ultra 10. My other half has been trying to throw it away for over five years now and regularly ask what function it serves in my study :-( I've got no shortage of 500GB external USB hard drives iMovie files are very large and ideally would be processed on a RAID system. Apple's TimeMachine isn't so great. If anyone could suggest all or part of a setup that would fulfil some of my requirements I'd be very grateful. I am willing to consider purchasing one or two more bits of kit (an Apple TV and a Squeezebox have been moted by friends) if they will help make efficiencies rather than add to the chaos and confusion. Thanks for looking.

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Setting Timeouts: SQL Server 2008/IIS 7.5

  - by Julie

  We have recently migrated from a Win 2003/SQL Server 2000 system to Win 2008 64 bit R2, SQL Server 2008 R2. Our websites are in classic asp, and this can't be changed to another scripting language at this time. On the old server, if I got stuck in some kind of endless loop, the page would throw an error. On the new server, I have a page that has some sort of looping problem, that even though the SQL SP is called only once (and runs fine run as a query on the server) it pegs SQL server and therefore locks all of our websites. I'll get my code figured out, no biggie. But I need to make sure the server times out when this happens. (The page I'm working on runs fine with certain instances of the query, and locks with others using a different query variable. I can't have something like that sneak up on me on a page I haven't touched for three years.) I can't figure out how an SP that runs once on the server, from an ASP page, is tying up SQL server this way. It's obviously some sort of a timeout issue, but I can't figure out where/which timeout values to change. I actually have to remote desktop to the server and kill the process in SQL server. I'm afraid I'm a generalist, and server management is not my thing, even though it's my responsibility, so I am almost certain to have questions about any answer that I receive. How can I track this down? What settings do I need to change? More info: It's not SQL Server On our test site, I created an ASP file that just did an endless loop (do while 1=1) and had the same problem - the other websites wouldn't load - without SQL server being involved. So I think the reason the process was hanging is that the page wasn't timing out as it should, and so the connection to SQL was never closed. Killing the process in SQL server would reset the page somehow. For my intentional endless loop, I had to refresh the app pool to get rid of it. This points more to either IIS or the ASP settings. The ASP timeouts are set to whatever the default were when the server was first loaded. I still can't figure out why one file is locking up all websites, though. Again, that didn't happen on the old server.

  Read the article

• How to correctly partition usb flash drive and which filesystem to choose considering wear leveling?

  - by random1

  Two problems. First one: how to partition the flash drive? I shouldn't need to do this, but I'm no longer sure if my partition is properly aligned since I was forced to delete and create a new partition table after gparted complained when I tried to format the drive from FAT to ext4. The naive answer would be to say "just use default and everything is going to be alright". However if you read the following links you'll know things are not that simple: https://lwn.net/Articles/428584/ and http://linux-howto-guide.blogspot.com/2009/10/increase-usb-flash-drive-write-speed.html Then there is also the issue of cylinders, heads and sectors. Currently I get this: $sfdisk -l -uM /dev/sdd Disk /dev/sdd: 30147 cylinders, 64 heads, 32 sectors/track Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 30147/64/32). For this listing I'll assume that geometry. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/sdd1 1 30146 30146 30869504 83 Linux $fdisk -l /dev/sdd Disk /dev/sdd: 31.6 GB, 31611420672 bytes 255 heads, 63 sectors/track, 3843 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00010c28 So from my current understanding I should align partitions at 4 MiB (currently it's at 1 MiB). But I still don't know how to set the heads and sectors properly for my device. Second problem: file system. From the benchmarks I saw ext4 provides the best performance, however there is the issue of wear leveling. How can I know that my Transcend JetFlash 700's microcontroller provides for wear leveling? Or will I just be killing my drive faster? I've seen a lot of posts on the web saying don't worry the newer drives already take care of that. But I've never seen a single piece of backed evidence of that and at some point people start mixing SSD with USB flash drives technology. The safe option would be to go for ext2, however a serious of tests that I performed showed horrible performance!!! These values are from a real scenario and not some synthetic test: 42 files: 3,429,415,284 bytes copied to flash drive original fat32: 15.1 MiB/s ext4 after new partition table: 10.2 MiB/s ext2 after new partition table: 1.9 MiB/s Please read the links that I posted above before answering. I would also be interested in answers backed up with some references because a lot is said and re-said but then it lacks facts. Thank you for the help.

  Read the article

• libvirt qemu/kvm migration problem

  - by Panda

  I am using kvm and libvirt on my Dell server. Now i am trying to migrate one virtual machine from a physical server to another. However, I failed everytime. In virsh on physicalServer1, I typed: virsh # migrate virtualmachine1 qemu+ssh://username@physicalServer2/system error: operation failed: migration to 'tcp:physicalServer2:49163' failed: migration failed Then I searched FAQ part on libvirt.org. It says: error: operation failed: migration to '...' failed: migration failed This is an error often encountered when trying to migrate with QEMU/KVM. This typically happens with plain migration, when the source VM cannot connect to the destination host. You will want to make sure your hosts are properly configured for migration (see the migration section of this FAQ) I managed to ssh physicalServer2 from a shell on virtualmachine1 so the above red part did not explain my failure. I also open ports on physicalServer2, iptables -L shows following information: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT tcp -- anywhere anywhere state NEW tcp dpts:49152:49215 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer2: 2011-05-06 13:37:30.708: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 2048 -smp 1,sockets=1,cores=1,threads=1 -name openjudge-test -uuid a8c704bc-a4f9-90db-3e57-40e60b00aac1 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/virtualmachine1.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc -boot c -drive file=/media/nfs/virtualmachine1.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=00:16:36:8a:22 :a0,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:2 -vga cirrus -incoming tcp:0.0.0.0:49163 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/0 2011-05-06 13:37:30.915: shutting down The /var/log/libvirt/qemu/virtualmachine1.log on physicalServer1 is empty. Both physical servers are using Ubuntu 11.04. The libvirt and kvm used are installed by apt-get. The libvirt version is 0.8.8.

  Read the article

• SMTP authentication error using PHPMailer

  - by Javier

  I am using PHPMailer to send a basic form to an email address but I get the following error: SMTP Error: Could not authenticate. Message could not be sent. Mailer Error: SMTP Error: Could not authenticate. SMTP server error: VXNlcm5hbWU6 The weird thing is that if I try to send it again, IT WORKS! Every time I submit the form after that first error it works. But if I leave it for a few minutes and then try again I get the same error again. The username and password have to be right as sometimes it works fine. I even created the following (very basic) script just to test it and I got the same result <?php require("phpmailer/class.phpmailer.php"); $mail = new PHPMailer(); $mail->IsSMTP(); $mail->Host = "smtp.host.com"; $mail->SMTPAuth = true; $mail->Username = "[email protected]"; $mail->Password = "password"; $mail->From = "[email protected]"; $mail->FromName = "From Name"; $mail->AddAddress("[email protected]"); $mail->AddReplyTo("[email protected]"); $mail->IsHTML(true); $mail->Subject = "Here is the subject"; $mail->Body = "This is the HTML message body <b>in bold!</b>"; $mail->AltBody = "This is the body in plain text for non-HTML mail clients"; if(!$mail->Send()) { echo "Message could not be sent. <p>"; echo "Mailer Error: " . $mail->ErrorInfo; exit; } echo "Message has been sent"; ?> I don't think this is relevant, but I just changed my hosting to a Linux shared server. Any idea why this is happening? Thanks! ***UPDATED 02/06/2012 I've been doing some tests. The results: I tested the script in an IIS server and it worked fine. The error seems to happen only in the Linux server. Also, if I use the gmail mail server it works fine in both, IIS and Linux. Could it be a problem with the configuration of my Linux server??

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• Block Google requests to 16k using pf firewall

  - by atmosx

  I'd like to block access to Google search using PF after the threshold of 17500 requests (connection established) in 24h, from a host running FreeBSD 9. What I came up with, after reading pf-faq is this rule: pass out on $net proto tcp from any to 'www.google.com' port www flags S/SA keep state (max-src-conn 200, max-src-conn-rate 17500/86400) NOTE: 86400 are 24h in seconds. The rule should work, but PF is smart enough to know that www.google.com resolves in 5 different IPs. So my pfctl -sr output gives me this: pass out on vte0 inet proto tcp from any to 173.194.44.81 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.82 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.83 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.80 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.84 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) PF creates 5 different rules, 1 for each IP that Google resolves. However I have the sense - without being 100% sure, I didn't had the chance to test it - that the number 17500/86400 applies for each IP. If that's the case - please confirm - then it's not what I want. In pf-faq there's another option called source-track-global: source-track This option enables the tracking of number of states created per source IP address. This option has two formats: + source-track rule - The maximum number of states created by this rule is limited by the rule's max-src-nodes and max-src-states options. Only state entries created by this particular rule count toward the rule's limits. + source-track global - The number of states created by all rules that use this option is limited. Each rule can specify different max-src-nodes and max-src-states options, however state entries created by any participating rule count towards each individual rule's limits. The total number of source IP addresses tracked globally can be controlled via the src-nodes runtime option. I tried to apply source-track-global in the above rule without success. How can I use this option in order to achieve my goal? Any thoughts or comments are more than welcome since I'm an amateur and don't fully understand PF yet. Thanks

  Read the article

• Issues getting a Cisco WLC 5508 to find AIR-LAP1142N

  - by user95917

  hoping someone can help me with a problem here. I'm attempting to setup a test (loan from Cisco) wireless network. Here's what i've got/done: 5508 Controller - Service Port IP set to 10.74.5.2 /24. Management IP set to 10.74.6.2 /24 with a default gateway of 10.74.6.1. Virtual IP set to 1.1.1.1. Copper SFP in slot 7, CAT5 (known good) going from there to port 1/0/47 on the switch. Green lights on both ends. 2960-S Switch - Vlan1 - 10.74.6.1 /24. dhcp pool 10.74.6.0 /24, default router 10.74.6.1. excluded-address 10.74.6.1, 10.74.6.2. 1/0/4 on the switch is set to switchport mode access and no shut. 1/0/47 on the switch is setup to switchport mode trunk and no shut. 1/0/4 has a CAT5 (known good) cable going from there to the AP. When I do a sh cdp nei from the switch, i can see the AP and Controller listed. When i configure my PC's nic to 10.74.5.5, and plug a cable from my nic to the SP port on the controller i can get on the device via the gui. In there, the only errors/info that show up in the trap are: Link Up: Slot: 0 Port: 7 Controller time base status - Controller is out of sync with the central timebase. I've manually set the time but apparently that's not quite the problem (or at least not the entire problem). When i plug the AP in, i see on the switch console that it grants it power, it sees it connect...but the controller won't see it for some reason. From what i've read you shouldn't have to do anything to the AP as it's managed by the controller...but i'm not sure what setting I'm missing for it to work. The AP light on top is continually cycling green, red, yellow. When I first start it up, it blinks green for 20 or so seconds, then goes to solid green for another 20 seconds or so, then flashes blue, green, red for awhile...but always ends up goinn back to the standard, green, red, yellow. Does anyone see any obvious issues with my setup or have any suggestions as to why i might be having a problem? Thanks for your help!

  Read the article

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• Flash was "not designed to function across LANs". Any workarounds?

  - by Triynko

  See: http://helpx.adobe.com/flash/kb/problems-using-flash-authoring-across.html Issue When using Adobe Flash across a local area network (LAN) and networked drives/folders, you may experience any of the following problems:" Flash crashes while performing a test movie on FLA files located on a networked drive or folder. FLA files get corrupted when opening from or saving to networked drives or folder. Flash does not reflect changes in custom class after compiling. Flash, Flash Video Encoder, or Adobe Media Encodercrashes or corrupts Flash Video (FLV) files while encoding source located on networked drives or folder. Flash Video Encoder or Adobe Media Encoder crashes or corrupts FLV files where the output folder is a networked drive or folder. Published Flash Player (SWF) files and projectors are unable to load content located on networked drives or folder. More than one instance of a SWF or Projector on client machines cannot play back FLV files located on a networked drive or folder. Reason The Adobe Flash IDE, FLV Encoder, Adobe Media Encoderand Flash Player were not designed to function across LANs. Solution Use of Flash files across local networks is not supported in any context. Published content should access data through a web server. All file sources should be opened and saved on the local system. Using Flash in such a scenario for project collaboration or content deployment is highly discouraged and may corrupt your source files. If you need to work in a collaborative environment or store source files on a server, use the project panel and/or a third-party version control system. SERIOUSLY? I cannot work on files located on a mapped network drive? How did they mess that one up? Does the Flash IDE really open the source file and wipe it clean to do the saving, rather than saving a copy first then replacing it as an atomic file system operation? How hard would it be for them make a dummy temporary file for saving then issue a MOVE command? Any workarounds for this, like something that can make a network drive as stable as a local drive, like some kind of automatic local caching and synching?

  Read the article

• Parsing xml files locally from assets folder using XmlPullParser

  - by Randolphg

  Im trying to parse a local xml file that I place in my assets folder. I've been trying to do this for almost a week now. Here is my test xml file Test1 Test2 Test3 Test4 Test5 I keep getting the same error: W/System.err(22458): org.xmlpull.v1.XmlPullParserException: unexpected type (position:TEXT Code: public void xmlParser() throws XmlPullParserException, IOException, ParserConfigurationException, SAXException { Log.d("tag", "xmlParsing...."); Arithmetic arthm = new Arithmetic(); XmlPullParserFactory xmlPF = XmlPullParserFactory.newInstance(); xmlPF.setValidating(false); XmlPullParser xml = xmlPF.newPullParser(); InputStream raw = getApplication().getAssets().open("menu.xml"); xml.setInput(raw, null); xml.nextTag(); Log.d("tag", "start parsing...."); String elementText = null; String elemName = null; int nofTags = 0; while (xml.getEventType() != XmlPullParser.END_DOCUMENT) { Log.d("tag", "while(xml.next)..."); switch (xml.getEventType()) { case XmlPullParser.START_DOCUMENT: Log.d("tag", "while (xml.getEventType() != XmlPullParser.END_DOCUMENT)"); break; case XmlPullParser.START_TAG: Log.d("tag", " case XmlPullParser.START_TAG"); elementText = xml.getName(); Log.d("tag", "elementText = " + elementText); if (xml.getEventType() != XmlPullParser.END_TAG) { xml.nextTag(); } break; case XmlPullParser.TEXT: Log.d("tag", "case TEXT"); if (elementText.equals("menu") && xml.isWhitespace()) { Log.d("tag", "<" + elementText + ">"); arthm.menu_name = xml.getText(); Log.d("tag", "value " + xml.getText() + " added"); } else if (elementText.equals("item")) { arthm.description = xml.getText(); Log.d("tag", "value " + xml.getText() + " added"); } else if (elementText.equals("SUBCATEGORY NAME")) { arthm.subcategoryDesc.add(xml.getText()); Log.d("tag", "value " + xml.getText() + " added"); } else if (elementText.equals("SUBCATEGORY DESC")) { arthm.subcategoryName.add(xml.getText()); Log.d("tag", "value " + xml.getText() + " added"); } break; case XmlPullParser.END_TAG: Log.d("tag", "case END_TAG"); nofTags += 1; String tags = Integer.toString(nofTags); Log.d("tags", elementText + " number of tags" + tags); if (xml.nextTag() != XmlPullParser.START_TAG) { xml.next(); } break; case XmlPullParser.END_DOCUMENT: Log.d("tag", "case END_DOCUMENT"); break; default: break; } } Log.d("tag", "Success!"); } Thanks in advance.

  Read the article

• Windows 7 playback of dvr-Microsoft files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-Microsoft format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-Microsoft (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-Microsoft file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-Microsoft files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-Microsoft looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for Windows Media Player but GraphStudio won't show it. It looks like Windows Media Player and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

• Persuading openldap to work with SSL on Ubuntu with cn=config

  - by Roger

  I simply cannot get this (TLS connection to openldap) to work and would appreciate some assistance. I have a working openldap server on ubuntu 10.04 LTS, it is configured to use cn=config and most of the info I can find for TLS seems to use the older slapd.conf file :-( I've been largely following the instructions here https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html plus stuff I've read here and elsewhere - which of course could be part of the problem as I don't totally understand all of this yet! I have created an ssl.ldif file as follows; dn:cn=config add: olcTLSCipherSuite olcTLSCipherSuite: TLSV1+RSA:!NULL add: olcTLSCRLCheck olcTLSCRLCheck: none add: olcTLSVerifyClient olcTLSVerifyClient: never add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/ldap_cacert.pem add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/my.domain.com_slapd_cert.pem add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/my.domain.com_slapd_key.pem and I import it using the following command line ldapmodify -x -D cn=admin,dc=mydomain,dc=com -W -f ssl.ldif I have edited /etc/default/slapd so that it has the following services line; SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" And everytime I'm making a change, I'm restarting slapd with /etc/init.d/slapd restart The following command line to test out the non TLS connection works fine; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldap://mydomain.com" "cn=roger*" But when I switch to ldaps using this command line; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldaps://mydomain.com" "cn=roger*" This is what I get; ldap_url_parse_ext(ldaps://mydomain.com) ldap_create ldap_url_parse_ext(ldaps://mydomain.com:636/??base) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP mydomain.com:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: can't connect: A TLS packet with unexpected length was received.. ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) Now if I check netstat -al I can see; tcp 0 0 *:www *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN tcp 0 0 *:ldaps *:* LISTEN tcp 0 0 *:ldap *:* LISTEN I'm not sure if this is significant as well ... I suspect it is; openssl s_client -connect mydomain.com:636 -showcerts CONNECTED(00000003) 916:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: I think I've made all my certificates etc OK and here are the results of some checks; If I do this; certtool -e --infile /etc/ssl/certs/ldap_cacert.pem I get Chain verification output: Verified. certtool -e --infile /etc/ssl/certs/mydomain.com_slapd_cert.pem Gives "certtool: the last certificate is not self signed" but it otherwise seems OK? Where have I gone wrong? Surely getting openldap to run securely on ubuntu should be easy and not require a degree in rocket science! Any ideas?

  Read the article

• 6to4 tunnel: cannot ping6 to ipv6.google.com?

  - by quanta

  Hi folks, Follow the Setup of 6to4 tunnel guide, I want to test ipv6 connectivity, but I cannot ping6 to ipv6.google.com. Details below: # traceroute 192.88.99.1 traceroute to 192.88.99.1 (192.88.99.1), 30 hops max, 40 byte packets 1 static.vdc.vn (123.30.53.1) 1.514 ms 2.622 ms 3.760 ms 2 static.vdc.vn (123.30.63.117) 0.608 ms 0.696 ms 0.735 ms 3 static.vdc.vn (123.30.63.101) 0.474 ms 0.477 ms 0.506 ms 4 203.162.231.214 (203.162.231.214) 11.327 ms 11.320 ms 11.312 ms 5 static.vdc.vn (222.255.165.34) 11.546 ms 11.684 ms 11.768 ms 6 203.162.217.26 (203.162.217.26) 42.460 ms 42.424 ms 42.401 ms 7 218.188.104.173 (218.188.104.173) 42.489 ms 42.462 ms 42.415 ms 8 218.189.5.10 (218.189.5.10) 42.613 ms 218.189.5.42 (218.189.5.42) 42.273 ms 42.300 ms 9 d1-26-224-143-118-on-nets.com (118.143.224.26) 205.752 ms d1-18-224-143-118-on-nets.com (118.143.224.18) 207.130 ms d1-14-224-143-118-on-nets.com (118.143.224.14) 206.970 ms 10 218.189.5.150 (218.189.5.150) 207.456 ms 206.349 ms 206.941 ms 11 * * * 12 10gigabitethernet2-1.core1.lax1.he.net (72.52.92.121) 214.087 ms 214.426 ms 214.818 ms 13 192.88.99.1 (192.88.99.1) 207.215 ms 199.270 ms 209.391 ms # ifconfig tun6to4 tun6to4 Link encap:IPv6-in-IPv4 inet6 addr: 2002:x:x::/16 Scope:Global inet6 addr: ::x.x.x.x/128 Scope:Compat UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:11 dropped:0 overruns:0 carrier:11 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # iptunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc tun6to4: ipv6/ip remote any local x.x.x.x ttl 64 # ip -6 route show ::/96 via :: dev tun6to4 metric 256 expires 21332777sec mtu 1480 advmss 1420 hoplimit 4294967295 2002::/16 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev eth0 metric 256 expires 15674592sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 metric 256 expires 15674597sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 default via ::192.88.99.1 dev tun6to4 metric 1 expires 21332861sec mtu 1480 advmss 1420 hoplimit 4294967295 # ping6 -n -c 4 ipv6.google.com PING ipv6.google.com(2404:6800:8005::68) 56 data bytes From 2002:x:x:: icmp_seq=0 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=1 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=2 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 2999ms What is my problem? Thanks,

  Read the article

• Constructing radiotap header and ieee80211 header structures for packet injection

  - by hektor

  I am trying to communicate between two laptop machines using Wifi. The structure of the radiotap header and ieee80211 header I am using is: struct ieee80211_radiotap_header { unsigned char it_version; uint16_t it_len; uint32_t it_present; }; /* Structure for 80211 header */ struct ieee80211_hdr_3addr { uint16_t frame_ctl[2]; uint16_t duration_id; unsigned char addr1[ETH_ALEN]; unsigned char addr2[ETH_ALEN]; unsigned char addr3[ETH_ALEN]; uint16_t seq_ctl; }; struct packet { struct ieee80211_radiotap_header rtap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char payload[30]; }; /* In main program */ struct packet mypacket; struct ieee80211_radiotap_header ratap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char addr1[ETH_ALEN] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; /* broadcast address */ unsigned char addr2[ETH_ALEN] = {0x28,0xcf,0xda,0xde,0xd3,0xcc}; /* mac address of network card */ unsigned char addr3[ETH_ALEN] = {0xd8,0xc7,0xc8,0xd7,0x9f,0x21}; /* mac address of access point i am trying to connect to */ /* Radio tap header data */ ratap_header.it_version = 0x00; ratap_header.it_len = 0x07; ratap_header.it_present = (1 << IEEE80211_RADIOTAP_RATE); mypacket.rtap_header = ratap_header; /* ieee80211 header data */ iee802_header.frame_ctl[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; iee802_header.frame_ctl[1] =IEEE80211_FC1_DIR_NODS; strcpy(iee802_header.addr1,addr1); strcpy(iee802_header.addr2,addr2); strcpy(iee802_header.addr3,addr3); iee802_header.seq_ctl = 0x1086; mypacket.iee802_header=iee802_header; /* Payload */ unsigned char payload[PACKET_LENGTH]="temp"; strcpy(mypacket.payload , payload); I am able to receive the packets when I test the transmission and reception on the same laptop. However I am not able to receive the packet transmitted on a different laptop. Wireshark does not show the packet as well. Can anyone point out the mistake I am making?

  Read the article

• Why are people trying to connect to me network on TCP port 445?

  - by Solignis

  I was playing with my new syslog server and had my m0n0wall firewall logs forwarded as a test, I noticed a bunch of recent firewall log entries that say that it blocked other WAN IPs from my ISP (I checked) from connecting to me on TCP port 445. Why would a random computer be trying to connect to me on a port apperently used for Windows SMB shares? Just internet garbage? A port scan? I am just curious. here is what I am seeing Mar 15 23:38:41 gateway/gateway ipmon[121]: 23:38:40.614422 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:42 gateway/gateway ipmon[121]: 23:38:41.665571 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:43 gateway/gateway ipmon[121]: 23:38:43.165622 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.614524 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.808856 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.836313 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx,xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.305633 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.490778 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.550230 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:43:33 gateway/gateway ipmon[121]: 23:43:33.185836 fxp0 @0:19 b 98.86.34.225,64060 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.405137 fxp0 @0:19 b 98.86.34.225,64081 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.454384 fxp0 @0:19 b 98.86.34.225,64089 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast I blacked out part of my IP address for my own safety.

  Read the article

• Configuration issue with HttpRealipModule (CloudFlare) in nginx configuration file

  - by Tyrx

  I've been attempting to use HttpRealipModule with the CloudFlare IP range in my main nginx configuration file but upon restarting nginx I'll just get a standard `"configuration file /etc/nginx/nginx.conf test failed" and my site will go down. This is what I've been attempting to do with my nginx.conf; user www-data; worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { # Basic Settings set_real_ip_from 204.93.240.0/24; set_real_ip_from 204.93.177.0/24; set_real_ip_from 199.27.128.0/21; set_real_ip_from 173.245.48.0/20; set_real_ip_from 103.22.200.0/22; set_real_ip_from 141.101.64.0/18; set_real_ip_from 108.162.192.0/18; set_real_ip_from 190.93.240.0/20; set_real_ip_from 188.114.96.0/20; set_real_ip_from 2400:cb00::/32; set_real_ip_from 2606:4700::/32; set_real_ip_from 2803:f800::/32; real_ip_header CF-Connecting-IP; client_max_body_size 50m; client_header_timeout 5; keepalive_timeout 5; port_in_redirect off; sendfile on; server_tokens off; server_name_in_redirect off; tcp_nopush on; tcp_nodelay on; types_hash_max_size 2048; # MIME include /etc/nginx/mime.types; default_type application/octet-stream; # Logging Settings access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log warn; # Gzip Settings gzip on; gzip_disable "msie6"; gzip_min_length 1400; gzip_types text/plain text/css text/javascript text/xml application/x-javascript application/xml application/xml+rss; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } What's wrong with that configuration file?

  Read the article

• Internal/external DNS with subdomains

  - by ScottMcGready

  I've got an internal DNS server (part of OS X server) and it's acting as the main DNS server for a specific (physical) site. When it can't resolve hostnames itself, it forwards requests to Google's DNS servers. Everything works well apart from a couple of issues, which I think may be related but can't get to the bottom of. I've got a number of intranet sites setup, that people can access by going to something like: intranet.mydomainname.com selfservice.mydomainname.com These point to various servers in the building that host these sites. Whether internal or external (without VPN), I can access these sites just dandy. Where the issue comes is when I want to host, say, test.mydomainname.com on an external server it fails to resolve as the primary zone for mydomainname.com is internal. How can I get it to look up Google's DNS (or an external one) for that zone if it's not in the list? I've tried everything I can think (adding my host's nameservers etc) of but nothing seems to work fully. Also I can't access intranet sites when connected via VPN and from what I can gather - I believe this might be related to the DNS issue but just wanted to give as much information as possible. Edit The domain mydomainname.com is hosted externally and pointed at the site's public IP. From there we can forward the requests to the relevant internal server. Externally everything works, internally though any subdomain of mydomainname.com is served locally, I want it to be served from Google's DNS / externally. DNS Configuration As per a request, here's the current DNS configuration (OS X server's DNS tab). I've blurred out the .private address as it's not really relevant but it's the server's name. The colored dots are just there to link everything together. Screenshot: In an attempt to clarify this is what I want: intranet.mydomain.com -> 192.168.0.12 selfservice.mydomain.com -> 192.168.0.13 *.mydomain.com -> forward to external DNS mydomain.com -> forward to external DNS At the moment any subdomain of mydomain.com is not forwarded on (think this is because of the primary zone being mydomain.com with a NS of intranet.mydomain.com but could do with a little nod in the right direction.

  Read the article

• Where / how does Apache generate the HTML code used in the default directory listing?

  - by Ellen B

  I am looking to modify the HTML that apache generates for its default directory listing. I already know how to create a HEADER.html file that gets included for every directory listing. I am attempting to change the actual html that Apache generates for the file listing itself; right now my MacOS apache generates this for example: <table><tr><th><img src="/icons/blank.gif" alt="[ICO]"></th><th><a href="?C=N;O=D">Name</a></th><th><a href="?C=M;O=A">Last modified</a></th><th><a href="?C=S;O=A">Size</a></th><th><a href="?C=D;O=A">Description</a></th></tr><tr><th colspan="5"><hr></th></tr> <tr><td valign="top"><img src="/icons/folder.gif" alt="[DIR]"></td><td><a href="ios-prototype/">ios-prototype/</a> </td><td align="right">07-Dec-2012 16:47 </td><td align="right"> - </td><td>&nbsp;</td></tr> <tr><td valign="top"><img src="/icons/folder.gif" alt="[DIR]"></td><td><a href="magneto-git/">magneto-git/</a> </td><td align="right">07-Dec-2012 16:46 </td><td align="right"> - </td><td>&nbsp;</td></tr> <tr><th colspan="5"><hr></th></tr> </table> I want a different HTML structure (like, say, an OL) generated when my server spits back directory listings. (FYI I'm doing a bunch of mobile browser prototyping with my local webserver & need to make it not totally horrible to browse with fingers to the right test directory — the table structure sucks, and while I can mod a lot of it with CSS it's still going to be ganky.)

  Read the article

• Some DHCP clients end up with wrong DNS server

  - by Nic Waller

  The scenario: DC running Windows Server 2008 R2 providing DNS + DHCP Cisco 1811 Router as the gateway 30 Windows XP DHCP clients on the LAN The problem: Some workstations are spontaneously switching to an incorrect DNS server. Specifically, ipconfig /all shows that they start using the gateway as a DNS server. This happens about 5-10 times a day to various computers, sometimes more than once per day. The workaround: Repairing the connection on the XP client always fixes the problem, and the correct DNS server address is obtained. We lost our main DNS/DHCP machine a week ago, and had to bring this one online as a spare. We've been having this issue since then. DHCP leases on the old and new servers are configured for "wired" (8 day) duration. There are definitely no other DHCP servers active on the LAN. So far there is no discernible pattern about which clients will show this problem, or when. When I ran DCDIAG /test:DNS it came back clean. Manual inspection of the DNS zone shows that all the records are appearing as expected, with no traces of the previous machine in there. Update Feb 27: Added screenshots. Here is a screenshot of the DHCP scope options on the 2008 R2 server. And here is a screenshot of ipconfig /all running on a healthy host. I don't have any ailing hosts at the moment, but will grab a screencap next time it happens. Update Feb 28: More screenshots. Here's a screenshot of DHCP and DNS traffic from a healthy client when repairing the local area connection. There's definitely only one server responding, but it does seem strange that the negotiation takes place twice. I'll try to get a similar capture from a sick machine this coming week. Update Mar 01: Caught a bad ipconfig. Here's a screenshot of ipconfig /all from a client that had this issue. It says the lease was issued this morning, but it doesn't even have an entry for the secondary DNS I set up yesterday. Both DNS servers were discovered properly when repairing the connection. Update Mar 01: It even got the sysadmin! This issue finally affected my personal workstation this morning. Unfortunately I had just rebooted and wasn't running a packet dump at the time. I set up a secondary server yesterday, and was logging all DNS traffic to it. My machine had not contacted the secondary DNS in over half an hour, so that says to me that it's just spontaneously reverting to the gateway without even failing over to secondary DNS first. Today I swapped the order of the DNS servers in DHCP, so the secondary is primary and vice versa. I will update again once I know how that goes.

  Read the article

• HP DAT72x6 autoloader

  - by ericmayo

  Hoping someone here has seen this similar issue and can offer soem advise... I have an HP DAT72x6 auto loader tape backup unit. The external kind, here is a link to an owner's manual I found of it. http://www.dectrader.com/docs/set2/emr_na-c00070400-1.pdf I purchased the unit used about 6 months ago. The unit stopped working after 3-4 back-ups, it's used one day a month to do a monthly backup of another system. Suffice it to say the unit gets very little usage. There is an amber light on the front of the unit called the OAR (Operator Attention Required). The manual states to call for service when this light comes on and stays on. I've tried a few things to resolve but none are working. I've tried power cycling, re-securing the SCSI cables at both ends. Unit was used so I didn't pay much ($500) and so I don't want to spend a lot to have it fixed; might as well buy something new one if fixing this is going to cost more than $100-$150 bucks. I'm curious to see if anyone here has been around these devices or possibly is an HP repair person that can give me some things to try to resolve. The manual states that a solid amber OAR light indicates a hardware failure. When I power cycle the unit I see one of two scenarios so far. The unit powers up, shows self test in the LCD, then LCD changes to show all possible images and the OAR light comes on. The unit powers up, LCD is completely blank, the green lights go through some sort of process of going on and off and later the amber OAR light comes on and stays on. If it's a simple misalignment issue, I may be able to fix myself but not knowing what could cause the OAR light to come on gives me no where to even start. Google around gave no help either. I hoping someone here has experience with this and can help or point me in the right direction. Also, I don't have the HP Diagnostic tools mentioned in many manuals. The unit is connected to a Linux box. The 3-4 backups I've done with it so far have had no issues. We run amanda backup. Before this incident the unit was backing up and reading tapes fine. Thanks for any help or suggestions.

  Read the article

< Previous Page | 902 903 904 905 906 907 908 909 910 911 912 913  | Next Page >