Search Results

Search found 24935 results on 998 pages for 'test utilities'.

Page 910/998 | < Previous Page | 906 907 908 909 910 911 912 913 914 915 916 917  | Next Page >

• Port forwarding using a BT Home Hub 2.0 (Supplied to new BT Infinity Customers in the UK)

  - by Jasarien

  I don't usually have trouble with port forwarding, I've been able to do it successfully on a number of different routers, including Linksys, Belkin, Netgear and Apple (Time Capsule / Airport Extreme). So I'm quite confused here. I had been using my Apple Time Capsule as my router for a few years now, with several port mappings all working fine. But it died recently, so I've had to resort to using the BT Home Hub 2.0 that was supplied with my BT Infinity broadband subscription. The forwarding interface for the Home Hub is simplified for the most part, allowing you to select an application or game and assign it to a particular computer on the network which you choose from a list that the Home Hub has 'discovered'. My Mac Pro has a manually assigned static IP 192.168.1.4 and my router is static at 192.168.1. I have chosen SSH from the list of applications and assigned it to my Mac Pro (the only computer in the list currently). The Home Hub also has a feature to keep a DNS service updated, and I have set it to keep my external IP address updated on my hostname. This is how I had it setup in the past with other routers and not had trouble before. I am able to ping my hostname (and external IP) from outside the network and get a response. But when I try to connect using SSH, the connection times out. The Home Hub also has "Firewall settings". The currently selected setting is: Default: Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed. But I've tried changing it to: Disabled: All traffic is allowed to pass through your BT Home Hub to your devices. Note: you’ll still need to use the games and application sharing feature to make sure that certain applications work properly. And the connection still times out... So frustrating. The OS X firewall on my Mac is disabled, so I don't think that's in the way. I have tried setting the port forwarding manually, instead of relying on the preset "SSH" option (incase it's not using the port I expect). So I set up my own "application" (as the Home Hub calls it) and forwarded external port 22 TCP to internal port 22 TCP to 192.168.1.4 - but that just gives the same result - unable to connect. Next, with the router's firewall disabled and OS X's firewall disabled, I ran the Shields Up test (https://www.grc.com/x/ne.dll?bh0bkyd2) and the result was that all my service ports (0 - 1055) are in 'Stealth' mode. I.e. nothing even exists at my IP as far as any outsider is concerned... Strange. The only thing that seems to work is setting my Mac Pro as the DMZ - which I don't want to do for obvious reasons. Any help with this would be extremely appreciated, thanks.

  Read the article

• Drupal on an NFS share has terrible performance

  - by Marcus

  We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

  Read the article

• Problems set-up Single Sign-On using Kerberos authentication

  - by user1124133

  I need for Ruby on Rail application set authentication via Active Directory using Kerberos authentication. Some technical information: I are using Apache installed mod_auth_kerb In httpd.conf I added LoadModule auth_kerb_module modules/mod_auth_kerb.so In /etc/krb5.conf I added following configuration [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = EU.ORG.COM dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] EU.ORG.COM = { kdc = eudc05.eu.org.com:88 admin_server = eudc05.eu.org.com:749 default_domain = eu.org.com } [domain_realm] .eu.org.com = EU.ORG.COM eu.org.com = EU.ORG.COM [appdefaults] pam = { debug = true ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } When I test kinit validuser and enter password then authentication is successful. klist returns: Ticket cache: FILE:/tmp/krb5cc_600 Default principal: [email protected] Valid starting Expires Service principal 02/08/13 13:46:40 02/08/13 23:46:47 krbtgt/[email protected] renew until 02/09/13 13:46:40 Kerberos 4 ticket cache: /tmp/tkt600 klist: You have no tickets cached In application Apache configuration I added IfModule mod_auth_kerb.c> Location /winlogin> AuthType Kerberos AuthName "Kerberos Loginsss" KrbMethodNegotiate off KrbAuthoritative on KrbVerifyKDC off KrbAuthRealms EU.ORG.COM Krb5Keytab /home/crmdata/httpd/apache.keytab KrbSaveCredentials off Require valid-user </Location> </IfModule> I restarted apache Now some tests: When I try to access application from Win7, I got pop-up message box, with text: Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentification without a secure connection) When I enter valid credentials then my application opens successfully, and all works fine. Questions: Is ok that for user pop-ups such windows? If I use NTLM authentication then there no such pop-up. I checked IE Internet Options and there 'Enable Integrated Windows Authentication' is checked. Why IE try to send username and password to application apache? If I correct to understand then Windows self must make authentication via Active Directory using Kerberos protocol. When I try to access application from Win7 and I enter incorrect credentials to pop-up message box Application say Authentication failed (this is OK) In apache error log I see: [error] [client 192.168.56.1] krb5_get_init_creds_password() failed: Client not found in Kerberos database But now I cannot get possibility to enter valid credentials, only when I restart IE I can get again pop-up box. What could be incorrect or missing in my Kerberos setup? I read in some blog post that probably something is needed to be done in Active Directory side. What exactly?

  Read the article

• DVD playback with Windows Media Player 11 works fine, but when copied to HDD and then played back, t

  - by stakx

  I have several DVDs with short documentaries on it. Since the notebook I'm using (a Dell Latitude E6400) has only one DVD drive, and I might play back those short movies very often, I thought of copying them to the HDD and playing them back from there. However, I've run into a problem, namely stuttering audio. Problem description: When I play back these movies directly from DVD (with Windows Media Player 11 under Windows Vista), everything works fine. Smooth video, no significant audio problems (only the occasional click). But as soon as I copy any of these DVDs to the HDD and try to play them back from there (e.g. using the wmpdvd://drive/title/chapter?contentdir=path protocol, I get stuttering audio — audio playback sounds like a machine gun for a third of a second or so, approx. every 8 seconds. I have tried converting the VOB files from the DVD to another format (ie. ripping), but that resulted in a noticeable downgrade of picture quality. Therefore I thought it best to keep the files in their original format, if possible. Still, I suspect that the stuttering audio is due to some (de-)muxing problem, and that changing the file format might help. (After all, video playback is fine; therefore I don't think that the hardware is too slow for playback.) Only thing is, I don't know how to convert the VOB files to another Windows Media Player-compatible format without quality loss. I hope someone can help me, or give me further pointers on things I could try out to get HDD playback to work without the problem described. Some things I've tried so far, without any success: VOB2MPG, in order to convert the .vob file to a .mpg file. But that changes only the A/V container, not the content. No re-encoding takes place at all. Re-encoding with MPlayer/MEncoder. Lots of quality loss there, and I frankly haven't got the time to test all possible settings combinations available. Disabling all plug-ins, equalizers, etc. in Windows Media Player. Disabling all hardware acceleration on the audio playback device. Further info on the VOB files I'm trying to playback: The video format is MPEG ES, PAL 720x576 pixels @ 24/25 frames per second. The sound stream is uncompressed PCM, 16-bit stereo @ 48kHz. (Might it help if I somehow re-encoded the sound stream at a lower resolution, or as an MP3? If so, how would I do this without changing the video stream?) P.S.: I am limited to using Windows Media Player (11). (I previously tried MPlayer btw., but the video playback quality was surprisingly bad.)

  Read the article

• Unable to delete all partitions on flash drive using Windows 7 OS??

  - by irrational John

  Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

  Read the article

• Radeon HD4850 serious issues when using DirectX 10

  - by ricsmania

  Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

  Read the article

• HTTPS request to a specific load-balanced virtual host (using Shibboleth for SSO)?

  - by Gary S. Weaver

  In one environment, we have three servers load balanced that have a single Tomcat instance on each, fronted by two different Apache virtual hosts. Each of those two virtual hosts (served by all three servers) has its own different load balancer. Internally, the first host (we'll call it barfoo) is served by port 443 (HTTPS) with its cert and the second host (we'll call it foobar) is served by port 1443 (HTTPS). When you hit foobar, it goes to the load balancer which is using IP affinity for that host, so you can easily test login/HTTPS on one of the servers serving foobar, but not the others (because you keep getting that server for the lifetime of the LB session, iirc). In addition, each of the servers are using Shibboleth v2 for authN/SSO, using mod_shib (iirc). So, a normal request to foobar hits the LB, is directed to the 3rd server (and will do that from then on for as long as the LB session lasts), then Apache, then to the Shibboleth SP which looks at the request, makes you login via negotiation with the Shibboleth IdP, then you hit Apache again which in turn hits Tomcat, renders, and returns the response. (I'm leaving out some steps there.) We'd like to hit one of the individual servers (foobar-03.acme.org which we'll say has IP 1.2.3.4) via HTTPS (skipping the load balancer), so we at first try putting this in /etc/hosts: 1.2.3.4 foobar.acme.org But since foobar.acme.org is a secondary virtual host running on 1443, it attempts to get barfoo.acme.org rather than foobar.acme.org at port 1443 and see that the cert for barfoo.acme.org is invalid for this case since it doesn't match the request's host, foobar.acme.org. I thought an ssh tunnel might be easy enough, so I tried: ssh -L 7777:foobar-03.acme.org:1443 [email protected] I tried just hitting https://localhost:7777/webappname in a browser, but when the Shibboleth login is over, it again tries to redirect to barfoo.acme.org, which is the default host for 443, and we get into an infinite redirect loop. I then tried setting up an SSH tunnel with privileged port 443 locally going to 443 of foobar-03.acme.org as the hostname for that virtual host: sudo ssh -L 443:foobar-03.acme.org:1443 [email protected] I also edited /etc/hosts to add: 127.0.0.1 foobar.acme.org This finally worked and I was able to get the browser to hit the individual HTTPS host at https://foobar.acme.org/webappname, bypassing the load balancer. This was a bit of a pain and wouldn't work for everyone, due to the requirement to use the local 443 port and ssh to the server. Is there an easier way to browse to and log into an individual host in this case?

  Read the article

• installed mongo using brew but stuck at prompt

  - by user50946

  I have installed mongo using brew on my mac. When I give mongo command I see this MongoDB shell version: 2.4.6 connecting to: test but it stays there and never give me command prompt back anyone else noticed something like this I have reinstalled with no luck. The issue is persistent thanks Logs ***** SERVER RESTARTED ***** Fri Oct 18 08:11:48.360 [initandlisten] MongoDB starting : pid=2081 port=27017 dbpath=/usr/local/var/mongodb 64-bit host=Asims-MacBook-Air.local Fri Oct 18 08:11:48.360 [initandlisten] db version v2.4.6 Fri Oct 18 08:11:48.360 [initandlisten] git version: nogitversion Fri Oct 18 08:11:48.360 [initandlisten] build info: Darwin minimountain.local 12.5.0 Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64 x86_64 BOOST_LIB_VERSION=1_49 Fri Oct 18 08:11:48.360 [initandlisten] allocator: tcmalloc Fri Oct 18 08:11:48.360 [initandlisten] options: { bind_ip: "127.0.0.1", config: "/usr/local/etc/mongod.conf", dbpath: "/usr/local/var/mongodb", logappend: "true", logpath: "/usr/local/var/log/mongodb/mongo.log" } Fri Oct 18 08:11:48.361 [initandlisten] journal dir=/usr/local/var/mongodb/journal Fri Oct 18 08:11:48.361 [initandlisten] recover : no journal files present, no recovery needed Fri Oct 18 08:11:48.398 [websvr] admin web console waiting for connections on port 28017 Fri Oct 18 08:11:48.398 [initandlisten] waiting for connections on port 27017 Fri Oct 18 08:12:03.279 [signalProcessingThread] got signal 1 (Hangup: 1), will terminate after current cmd ends Fri Oct 18 08:12:03.279 [signalProcessingThread] now exiting Fri Oct 18 08:12:03.279 dbexit: Fri Oct 18 08:12:03.279 [signalProcessingThread] shutdown: going to close listening sockets... Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 9 Fri Oct 18 08:12:03.279 [signalProcessingThread] closing listening socket: 10 Fri Oct 18 08:12:03.280 [signalProcessingThread] closing listening socket: 11 Fri Oct 18 08:12:03.280 [signalProcessingThread] removing socket file: /tmp/mongodb-27017.sock Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to flush diaglog... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: going to close sockets... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: waiting for fs preallocator... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: lock for final commit... Fri Oct 18 08:12:03.280 [signalProcessingThread] shutdown: final commit... Fri Oct 18 08:12:03.282 [signalProcessingThread] shutdown: closing all files... Fri Oct 18 08:12:03.282 [signalProcessingThread] closeAllFiles() finished

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• New Exchange 2010 CAS cannot find domain controllers

  - by NorbyTheGeek

  I am experiencing problems migrating from Exchange 2003 to Exchange 2010. I am on the first step: installing a new 2010 Client Access Server role. The Active Directory domain functional level is 2003. All domain controllers are 2003 R2. The only existing Exchange 2003 server happens to be housed on one of the domain controllers. It is running Exchange 2003 Standard w/ SP2. IPv6 is enabled and working on all domain controllers, servers, and routers, including this new Exchange server. After installing the CAS role on a new 2008 R2 server (Hyper-V VM) I am receiving 2114 Events: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers. Prior to each, I receive the following 2080 Event: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Exchange Active Directory Provider has discovered the following servers with the following characteristics: (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version) In-site: b.company.intranet CDG 1 0 0 1 0 0 0 0 0 s.company.intranet CDG 1 0 0 1 0 0 0 0 0 Out-of-site: a.company.intranet CD- 1 0 0 0 0 0 0 0 0 o.company.intranet CD- 1 0 0 0 0 0 0 0 0 g.company.intranet CD- 1 0 0 0 0 0 0 0 0 Connectivity between the new Exchange server and all domain controllers via IPv4 and IPv6 are all working. I have verified that the new Exchange server is a member of the following groups: Exchange Servers Exchange Domain Servers Exchange Install Domain Servers Exchange Trusted Subsystem Heck, I even put the new Exchange server into Domain Admins just to see if it would help. It didn't. I can't find any evidence of Active Directory replication problems, all pre-setup Setup tasks (/PrepareLegacyExchangePermissions, /PrepareSchema, /PrepareAD, /PrepareDomain) completed successfully. The only problem so far that I haven't been able to resolve with my Active Directory is I am unable to get my IPv6 subnets into Sites and Services Where should I proceed from here?

  Read the article

• dnsmasq local network works for some but hostnames are not resolving for others

  - by prggmr

  I have set up a local network and it seems that some of us can use it properly while others can't. The problem seems to be that the local hostnames I setup don't get resolved for everyone. To overview how the network is setup: I am running an Ubuntu 10.01 server using dnsmasq, this server is setup to act as our primary DNS server, configured via our router. dnsmasq is configured using the options of domain-needed bogus-priv I use the /etc/hosts file to determain the hostnames 192.168.1.10 ra.xsi 192.168.1.10 test.xsi From my machine: If I dig the hostnames they resolve properly ; <<>> DiG 9.4.3-P1 <<>> ra.xsi ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61671 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 9 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:28:34 2011 ;; MSG SIZE rcvd: 40 Ping also works: PING ra.xsi (192.168.1.10): 56 data bytes 64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=0.834 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.699 ms ^C --- ra.xsi ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.699/0.766/0.834/0.068 ms And login via SSH works using the hostname. For those that cannot connect using hostnames, if I dig from their machine it appears the name is being resolved, but they cannot ping, SSH or http access the hostname. ; <<>> DiG 9.6.0-APPLE-P2 <<>> ra ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12554 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 8 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:05:50 2011 ;; MSG SIZE rcvd: 36 I've been banging my head at this and just can't seem to figure it out.

  Read the article

• Error sending email to alias with Postfix

  - by Burning the Codeigniter

  I'm on Ubuntu 11.04 64bit. I'm trying to set up Postfix on my VPS, which has been configured but when I send an email to an alias e.g. [email protected] it will send it to [email protected]. Now when I sent the email from my GMail account, I got this returned: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 #5.1.0 Address rejected [email protected] (state 14). ----- Original message ----- DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=R1WtjVRWywfkWCR2g4QKbSjAfUaU9DAAMKbg9UAWqvs=; b=FiSfdhEaV4pEq/76ENlH4tvOgm35Ow3ulRg06kDYrIQTaDf3eOEgfSEgH25PjZuAj/ 7Hg1CL++o6Rt/tl80ZiR2AWekhA0zIn2JkqE7KssMG7WbBmMmbf8V9KDo2jOw+mZv+C/ KDKsQ65AudBZ/NYLDDpTT7MkKf8DzqeGCKj9MAct6sHDoC0wCciXYxNfTf+MKxrZvRHQ oICTkH5LOugKW9wEjPF2AoO8X0qgYmTLYeSUtXxu46VeNKRBGmdRkkpPOoJlQN9ank7i SW6kU6M9bk2bYOgKwV/YPsaantmYlu1XdmYx+kWeJkNJAyYOfXfZZ8WUJhbbFFD9bZCi m/hw== MIME-Version: 1.0 Received: by 10.101.3.5 with SMTP id f5mr783908ani.86.1334247306547; Thu, 12 Apr 2012 09:15:06 -0700 (PDT) Received: by 10.236.73.136 with HTTP; Thu, 12 Apr 2012 09:15:06 -0700 (PDT) Date: Thu, 12 Apr 2012 17:15:06 +0100 Message-ID: <CAN+9S2aB=xjiDxVZx3qYZoBMFD4XuadUyR_3OYWaxw1ecrZmOQ@mail.gmail.com> Subject: Test Email From: My Name <[email protected]> To: [email protected] Content-Type: multipart/alternative; boundary=001636c597eabfd21504bd7da8fd Now that I don't understand why it isn't working, my aliases are set up correctly - I see no error messages being produced in /var/log/mail.log or any other mail logs, which makes it harder for me to debug. This is my postfix configuration (postconf -n): alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = $mydomain, $myhostname, localhost, localhost.localdomain, localhost mydomain = domain.com myhostname = localhost mynetworks = 192.168.1.0/24 127.0.0.0/8 readme_directory = no recipient_delimiter = + smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Does anyone know how to solve this specific issue?

  Read the article

• how do i install intermediate certificate

  - by getmizanur

  I have installed private key (pem encoded) and public key certificate (pem encoded) on amazon load balancer however when i check the ssl with site test tool (http://www.networking4all.com/en/support/tools/site+check/), i get the following error Error while checking the SSL Certificate!! Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server. i converted crt file to pem using these command from this tutorial openssl x509 -in input.crt -out input.der -outform DER openssl x509 -in input.der -inform DER -out output.pem -outform PEM during setting up of amazon load balancer only option i left out was certificate chain (pem encoded) however this was optional. could this be cause of my issue? and if so i how do i create certificate chain? for the last question i have tried googling however i'm getting more confused than before. please help many thanks in advance. UPDATE @all thanks for the helpful advice. if you make request to verisign they will give you a certificate chain however this chain includes public crt, intermediate crt and root crt. make sure to remove the public crt from your certificate chain (which is the top most certificate) before adding it to your certification chain box of your amazon load balancer. if you are making https request from an android app then above instruction may not work for older android os such as 2.1 and 2.2. to make it work on older android os [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR657&actp=LIST&viewlocale=en_US]. on this link click on "retail ssl" tab and then click on "secure site" "CA Bundle for Apache Server". copy and past these intermediate certs into certificate chain box. just incase if you have not found it here is the direct link [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1409] if you are using geo trust certificates then solution is much the same for android devices however you need to copy and past their intermediate certs for android. PS: sorry for the long urls however "new users can only post a maximum of two hyperlinks"

  Read the article

• How to tune system settings for mongoDB on Linux?

  - by jsh

  Trying to squeeze a lot out of one question here -- please bear with me. Although the MongoDB man pages make several useful recommendations about system settings like ulimit (http://docs.mongodb.org/manual/reference/ulimit/), and other production factors (http://docs.mongodb.org/manual/administration/production-notes/) they seem mysteriously silent on things like virtual memory and swap settings. The closest we get to a hint is that "...the operating system’s virtual memory subsystem manages MongoDB’s memory..." (http://docs.mongodb.org/manual/faq/fundamentals/#does-mongodb-require-a-lot-of-ram). Running the same job - high writes and high reads on about 10,000,000 records in a single collection -- on my 4-processor, 4GB RAM macbook and an 8-core ubuntu box with 64GB RAM I saw dramatically WORSE read performance on the linux box with factory settings, and could hear the disk constantly spinning, indicating high I/O and presumably swapping. Yes, other things were happening on the box, but there was plenty of free RAM, disk space, etc.; furthermore, I did not see evidence that Mongo was expanding to take advantage of all that free RAM as it is touted to do. Linux box default settings were as follows: vm.swappiness =60 vm.dirty_background_ratio = 10 vm.dirty_ratio = 20 vm.dirty_expire_centisecs =3000 vm.dirty_writeback_centisecs=500 I hazarded some guesses looking at docs and blogs for other types of databases (Oracle, MYSQL, etc.), experimented, and adjusted as below. vm.swappiness=10 vm.dirty_background_ratio=5 vm.dirty_ratio=5 vm.dirty_writeback_centisecs=250 vm.dirty_expire_centisecs=500 I saw some immediate apparent improvements in read time. However, when I ran my test jobs again, read performance continued to be painfully sluggish during heavy writes. Then, I REBUILT the collection from an available data source - and suddenly I can read at 1ms or less per record WHILE doing the write job! So the question is really two-fold: 1) What are appropriate VM settings for MongoDB on Linux? 2) (bonus) Does Mongo do some checking or optimization with the OS while data is being built? In other words, if I have built a large data set with suboptimal VM or I/O settings, does Mongo make assumptions during the memory-mapping process that will fail to take advantage of optimizations down the road? Obviously I don't fully grok memory mapping under the hood (I was hoping I wouldn't have to). Any help appreciated...thanks! -j

  Read the article

• How to generate build no with SVN revision no & Maven buildNumber plugin.

  - by Binit jha

  Hi, I am using mvn buildNumber plugin to generate build no with latest svn revision no. But, our version is not resolve to ${buildNumber} in the duration of installing in .m2 local reposotry. here is the our pom details: <modelVersion>4.0.0</modelVersion> <groupId>com.hp.cloudprint</groupId> <artifactId>testutils</artifactId> <name>testutils</name> <version>6.3.rel.${buildNumber}</version> <description>This jar contains some helper classes which can simplify the writing of JUnit test cases.</description> <dependencies> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>buildnumber-maven-plugin</artifactId> <executions> <execution> <id>useLastCommittedRevision</id> <phase>validate</phase> <goals> <goal>create</goal> </goals> </execution> </executions> <configuration> <doCheck>false</doCheck> <doUpdate>true</doUpdate> <getRevisionOnlyOnce>true</getRevisionOnlyOnce> </configuration> </plugin> <scm> <connection>scm:svn:https://acn-platform</connection> <developerConnection>scm:svn:https://abc-platform/trunk</developerConnection> </scm>. </project> Building jar: C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar [INFO] [install:install] [INFO] Installing C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar to C:\Documents and Settings\jhab.m2*\repository\com\hp\cloudprint\testutils\6.3.rel.${buildNumber}\testutils-6.3.rel.${buildNumber}.jar** [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL Target generated correct jar. testutil-6.3.rel.2297.jar* Thanks in advance Binit

  Read the article

• Help needed setting up nginx to serve static files.

  - by Catalina

  Hi Guys, I'm trying to setup nginx to serve static files. Basically all I need is to have http://mydomain.com/site_media/ point to /var/django/myproject/site_media. I have tried so many configurations and when I test it I always get a 404 error for static files. Can anyone please tell me what I'm doing wrong or how I should be setting this up? This is my current nginx configuration file. user www-data; worker_processes 1; #error_log /usr/local/nginx/logs/error.log; #pid /usr/local/nginx/logs/nginx.pid; events { worker_connections 1024; use epoll; } http { # Enumerate all the Tornado servers here upstream frontends { server 127.0.0.1:8000; server 127.0.0.1:8001; server 127.0.0.1:8002; server 127.0.0.1:8003; } include mime.types; default_type application/octet-stream; #access_log /usr/local/nginx/logs/access.log; keepalive_timeout 65; proxy_read_timeout 200; sendfile on; tcp_nopush on; tcp_nodelay on; gzip on; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain text/html text/css text/xml application/x-javascript application/xml application/atom+xml text/javascript; proxy_next_upstream error; server { listen 80; # Allow file uploads client_max_body_size 50M; location ^~ /site_media/ { root /var/django/myproject/site_media; if ($query_string) { expires max; } } location = /favicon.ico { rewrite (.*) /site_media/favicon.ico; } location = /robots.txt { rewrite (.*) /site_media/robots.txt; } location / { proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_pass http://frontends; } } #include /usr/local/nginx/sites-enabled/*; } Thanks, Cata

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• Squid on windows loadbalancing only to one server

  - by Martin L.

  After thousands of googles and trying days i cant get the load balancer/failover in squid on windows to work. Iam using squid 2.7. My webservers are 2 single NIC lighttpd and one dual nic lighttpd. server1 in this example is running squid on port 80 and lighttpd on port 8080 (just to test) Requirements: All 3 webservers running lighttpd should be balanced two option for load balancing: Best would be if server1 is busy server2 takes over, if server2 is busy server3 takes over, etc.. Round robin style evenly distributed load. Eg server1 takes first call, server2 second etc.. All requests should be treated the same way (no url rewriting or so on) Sent host headers have to be redirected to every server as http host header, speaking of "server1", "server1.company.internal" and "10.211.1.1". My approach: acl all src all acl manager proto cache_object http_port 80 accel defaultsite=server1.company.internal vhost #reverse proxy entries cache_peer 10.211.2.1 parent 8080 0 no-query originserver round-robin login=PASS name=server1_nic1 cache_peer 10.211.1.2 parent 80 0 no-query originserver round-robin login=PASS name=server2_nic1 cache_peer 10.211.2.3 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic1 cache_peer 10.211.2.4 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic2 #decl of names of squid host acl registered_name_hostdomain dstdomain server1.company.internal acl registered_name_host dstdomain server1 #ip of squid host acl registered_name_ip dstdomain 10.211.2.1 # access: redirects the correct squid hostname http_access allow registered_name_hostdomain http_access allow registered_name_host http_access allow registered_name_ip http_access deny all cache_peer_access server1_nic1 allow registered_name_hostdomain cache_peer_access server1_nic1 allow registered_name_host cache_peer_access server1_nic1 allow registered_name_ip cache_peer_access server2_nic1 allow registered_name_hostdomain cache_peer_access server2_nic1 allow registered_name_host cache_peer_access server2_nic1 allow registered_name_ip cache_peer_access server3_nic1 allow registered_name_hostdomain cache_peer_access server3_nic1 allow registered_name_host cache_peer_access server3_nic1 allow registered_name_ip cache_peer_access server3_nic2 allow registered_name_hostdomain cache_peer_access server3_nic2 allow registered_name_host cache_peer_access server3_nic2 allow registered_name_ip cache_peer_access server1_nic1 deny all cache_peer_access server2_nic1 deny all cache_peer_access server3_nic1 deny all cache_peer_access server3_nic2 deny all never_direct allow all Problems: Load balancer does not load balance other than to first server. Only if the first server is killed in any way the second will take over. I have seen the others working at some point, but definitely not as the intended load balancing described above. If the cache_peer_access is not defined sometimes the wrong hostname is sent to the backend webserver and this always depends on the defaultsite= parameter. Probably because the host header on the request to squid is not set and its replaced by defaultsite. Leaving out defaultsite didnt solve the problem. The only workaround i found for this is the current approach with cache_peer_access. Questions: Does the cache_peer_access influence the round-robin? Is there a better workaround to pass the host header to the backed webservers? Which parameters do increase the speed of load balancing or does anyone have a better approach? -Martin

  Read the article

• Why is domU faster than dom0 on IO?

  - by Paco

  I have installed debian 7 on a physical machine. This is the configuration of the machine: 3 hard drives using RAID 5 Strip element size: 1M Read policy: Adaptive read ahead Write policy: Write Through /boot 200 MB ext2 / 15 GB ext3 SWAP 10GB LVM rest (~500GB) emphasized text I installed postgresql, created a big database (over 1GB). I have an SQL request that takes a lot of time to run (a SELECT statement, so it only reads data from the database). This request takes approximately 5.5 seconds to run. Then, I installed XEN, created a domU, with another debian distro. On this OS, I also installed postgresql, with the same database. The same SQL request takes only 2.5 seconds to run. I checked the kernel on both dom0 and domU. uname-a returns "Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux" on both systems. I checked the kernel parameters, which are approximately the same. For those that are relevant, I changed their values to make them match on both systems using sysctl. I saw no changes (the requests still take the same amount of time). After this, I checked the file systems. I used ext3 on domU. Still no changes. I installed hdparm, and ran hdparm -Tt on both systems, on all my partitions on both systems, and I get similar results. Now, I am stuck, I don't know what is different, and what could be the cause of such a big difference. Additional Info: Debian runs on a Dell server PowerEdge 2950 postgresql: 9.1.9 (both dom0 and domU) xen-linux-system: 3.2.0 xen-hypervisor: 4.1 Thanks EDIT: As Krzysztof Ksiezyk suggested, it might be due to some file caching system. I ran the dd command to test both the read and write speed. Here is domU: root@test1:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 18.8289 s, 107 MB/s root@test1:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 15.0549 s, 134 MB/s And here is dom0: root@debian:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 8.87281 s, 191 MB/s root@debian:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 0.501509 s, 3.4 GB/s What can be the cause of this caching system? And how can we "fix" it? Can we apply it to dom0? EDIT 2: I switched my virtual disk type. To do so I followed this article. I did a dd if=/dev/vg0/test1-disk of=/mnt/test1-disk.img bs=16M Then in /etc/xen/test1.cfg, I changed the disk parameter to use file: instead of phy: it should have removed the file caching, but I still get the same numbers (domU being much faster for Postgres)

  Read the article

• inews failed: "No colon-space in "X-MS-TNEF-Correlator:"

  - by wolfgangsz

  We run a news server for our engineering teams, which is also linked to the code repositories (so that all engineers can subscribe to any changes in the repos or just the projects they are interested in). On quite a regular basis (several times a day) I (as the sysadmin for that server) receive bounces from innd with the above as the first line. The news server simply rejects these messages and the articles don't get posted. Here is an example: inews failed: inews: cannot send article to server: 441 437 No colon-space in "X-MS-TNEF-Correlator:" header inews: article not posted -------- Article Contents Path: aminocom.com!ctaylor From: [email protected] (Cameron Taylor) Newsgroups: amino.qa.reports Content-Language: en-US Content-Type: multipart/alternative; boundary="_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_" MIME-Version: 1.0 Subject: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Message-ID: Date: Thu, 9 Sep 2010 16:15:16 +0000 X-Received: from uk-swa-ex02.aminocom.com (uk-swa-ex02.aminocom.com [10.171.3.10]) by theoline.aminocom.com (8.14.3/8.13.8) with ESMTP id o89GF8tx019494 for ; Thu, 9 Sep 2010 17:15:08 +0100 X-Received: from uk-swa-ex01.aminocom.com ([10.171.3.9]) by uk-swa-ex02 ([10.171.3.10]) with mapi; Thu, 9 Sep 2010 17:15:18 +0100 X-To: QA Reports X-Thread-Topic: [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** X-Thread-Index: ActQOjBdms0CSJsORNSxRIMSZ4H3Ow== X-Accept-Language: en-US, en-GB X-MS-Has-Attach: X-MS-TNEF-Correlator: X-Auto-Response-Suppress: DR, OOF, AutoReply --_000_A2AB95742ADD524795C13EDE8F8CCD201A798C0Eukswaex01_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable SQA Test Report [QA REPORT] MDK 400 release 3.4.33 **PRE-RELEASE** Status .... (rest of the message is not important) And yes, quite clearly this header doesn't have anything after the colon. The man page for innd doesn't specify why it rejects these messages, it just says it rejects them. So far I have found out these headers are linked to messages in RTF format (coming from Outlook clients), where normally the formatting information would be stored in a winmail.dat attachment. The clients all use MS Exchange 2010 servers to send their mail (identified above as uk-swa-ex02.aminocom.com) which forwards the message to the news server. Does anybody know what advice I need to give these users to avoid their articles getting bounced? Or can I change the behaviour of innd? Or do I need to filter these headers out before innd processes the articles?

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• HTTPS in sub domain redirects to main domain

  - by Amitabh

  We recently bought a wildcard certificate and installed it for a domain. It works fine for the main domain but seems to not work at all for any sub domains. Whats happening is we can access the sub domains fine on HTTP, but whenever we try HTTPS for the same sub domain url we are redirected back to the main domain. So if I put up a test folder "httpstest" in a sub domain with a index.html file in it, the following happens mysubdomain.mywebsite.com/httpstest/index.html or mysubdomain.mywebsite.com/httpstest/ works perfectly fine with http:// but mysubdomain.mywebsite.com/httpstest/ or mysubdomain.mywebsite.com/httpstest/index.html does not work with https:// and redirects to the main domain.Any help on this is greatly appreciated. The site is not the main site used for setting up the VPS. It was added from WHM. Environment: We are on a Linux VPS. Cpanel 11.30.6 , Apache 2.2.22, PHP 5.3.13 The Virtualhost entry looks like: <VirtualHost xx.xx.xxx.xx:443> ServerName my-own-website.com ServerAlias www.my-own-website.com DocumentRoot /home/amitabh/public_html ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/my-own-website.com combined CustomLog /usr/local/apache/domlogs/my-own-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User amitabh # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup amitabh amitabh </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup amitabh amitabh </IfModule> ScriptAlias /cgi-bin/ /home/amitabh/public_html/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-own-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-own-website.com.key SSLCACertificateFile /etc/ssl/certs/my-own-website.com.cabundle CustomLog /usr/local/apache/domlogs/my-own-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/amitabh/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/ssl/2/amitabh/my-own-website.com/*.conf" </VirtualHost>` I guess I messed up the formatting big time. Any help on formatting and on the issue is great appreciated. Thank you. Update: I could not update the formatting here. I posted the same question in a linux forum . I will really appreciate any pointer on it.

  Read the article

• Win-XP Browsers Hang on page load - (waiting for...)

  - by CHarmon

  Hello, I’m having problems with my browsers hanging on loading pages on my desktop machine. I’m using Windows XP Pro with SP3 and fully updated except for IE 8. All three of my browsers, IE 7, Chrome and Firefox are having the same problems. Pages are not being loaded and are hanging on “waiting for …”. The browsers are waiting for the page being loaded or ad servers. Sometimes a page will load but the loading graphic continues to be displayed as if the page were still loading when the page appears to be fully loaded. The problem is bad enough that I can’t really use any of my browsers. I can eventually get most pages to load by stopping and restarting the page load. I have DSL modem with a wireless router and I have been able to eliminate the modem and router from being the source of my problem. My laptop doesn’t have any problems even when hardwired to the router and with the wireless connection disabled. I deleted the NIC and let XP re-install. Also tried a different network cable. Tried the same router port used in the laptop test. One clue that may be important is that I can’t connect to my router using the desktop machine…the page hangs while trying to connect. I can ping the router and I can quickly connect to the router using the laptop. I also can’t use the Windows update process – the page never fully loads. The problem affects other user accounts and even happens in safe mode. I am convinced the problem is with part of the O/S…some layer able to affect all of the browsers. The purpose of this post is to see if anyone has some ideas before I do a XP repair. I have done quite a bit of trouble-shooting: Ran a full anti-virus scan with AVG – no problems. Ran full scans with Spybot, MalwareBytes and Sophos anti-rootkit – no problems. Ran Chkdsk with both options checked. Ran Disk Clean up Defragged RE-installed IE7 Cleared all the browser caches Ran Ccleaner (registry tool) Ran HijackThis – nothing unusual (problem happens in safe mode too) Ran Process Explorer – no unusual processes Used System Restore and fell back several days – no change in the problem Booted to last known good configuration – no change in the problem Ran MicrosoftFixit50199.msi – no change in the problem Any ideas or suggestions would be appreciated…I’m not looking forward to doing a repair on XP. Thanks in advance for any help.

  Read the article

• Make mod_wsgi use python2.7.2 instead of python2.6?

  - by guron

  i am running Ubuntu 10.04.1 LTS and it came pre-packed with python2.6 but i need to replace it with python2.7.2. (The reason is simple, 2.7 has a lot of features backported from 3 ) i had installed python2.7.2 using ./configure make make altinstall the altinstall option installed it, without touching the system default version, to /usr/local/lib/python2.7 and placed the interpreter in /usr/local/bin/python2.7 Then to help mod_wsgi find python2.7 i added the following to /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local i start apache and run a test wsgi app BUT i am greeted by python 2.6.5 and not Python2.7 Later i replaced the default python simlink to point to python 2.7 ln -f /usr/local/bin/python2.7 /usr/bin/python Now typing 'python' on the console opens python2.7 but somehow mod_wsgi still picks up python2.6 Next i tried, PATH=/usr/local/bin:$PATH export PATH then do a quick restart apache, but yet again its python2.6 !! Here is my $PATH /usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games contents of /etc/apache2/sites-available/wsgisite WSGIPythonHome /usr/local <VirtualHost *:80> ServerName wsgitest.local DocumentRoot /home/wwwhost/pydocs/wsgi <Directory /home/wwwhost/pydocs/wsgi> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /home/wwwhost/pydocs/wsgi/app.wsgi </VirtualHost> app.wsgi import sys def application(environ, start_response): status = '200 OK' output = sys.version response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Apache error.log 'import site' failed; use -v for traceback [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23235): Initializing Python. [Sun Jun 19 00:27:21 2011] [notice] Apache/2.2.14 (Ubuntu) mod_wsgi/2.8 Python/2.6.5 configured -- resuming normal operations [Sun Jun 19 00:27:21 2011] [info] Server built: Nov 18 2010 21:20:56 [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23238): Attach interpreter ''. [Sun Jun 19 00:27:21 2011] [info] mod_wsgi (pid=23239): Attach interpreter ''. [Sun Jun 19 00:27:31 2011] [info] mod_wsgi (pid=23238): Create interpreter 'wsgitest.local|'. [Sun Jun 19 00:27:31 2011] [info] [client 192.168.1.205] mod_wsgi (pid=23238, process='', application='wsgitest.local|'): Loading WSGI script '/home/wwwhost/pydocs/$ [Sun Jun 19 00:27:50 2011] [info] mod_wsgi (pid=23239): Create interpreter 'wsgitest.local|'. Has anybody ever managed to make mod_wsgi run on a non-system default version of python ?

  Read the article

• Recommendations or advice for shared computer control

  - by Telemachus

  Basic scenario: we are a school (overwhelmingly Mac, some Windows machines via BootCamp), and we are considering using DeepFreeze to guard the state of our shared machines. We have roughly 250 machines that are either shared laptops (which move around quite a bit) or common desktops in public spaces. Obviously, we spend a lot of time maintaining the machines and trying to reverse the inevitable drift as people make changes to the computers. We would like to control the integrity of the build we initially put onto the machines without handcuffing users and especially without using Mac's Parental Control software. (We've had nothing but bad experiences with it.) We've been testing DeepFreeze, and so far it's very impressive. But I'm curious to hear if people who have used DeepFreeze or any similar software have any advice or tips. To get things started, I will post my own pros and cons. Pros: The state of the machine is frozen in our chosen state. All changes made to the machine after that disappear upon restart. (This frozen state really appears to cover everything. I have yet to do something to a test machine that isn't instantly healed.) Tons of trivial but time-consuming maintenance is gone in an instant. Also, lots of not-so-trivial breakage should be avoided. There are good options, however, that allow you to create storage spaces either globally or per user. (Otherwise, stored files disappear upon reboot. For some machines, this is a good option itself. Simply warn people: save externally or else; this machine is a kiosk, not your storage space.) Cons: Anytime we actually need to make a change (upgrade basic software, add a printer or an airport permanently, add new software), the process is a bit more complex. Reboot into a special mode (thaw state), make changes, reboot back into frozen mode. If (when?) we forget this, we will end up making changes that disappear after the next reboot. Users will forget to save files correctly (in the right place or externally), and we will have loud, unpleasant conversations explaining that we can't recover the document they worked on all afternoon yesterday. The machine rebooted. The file is gone. These are my initial thoughts, but I would love to hear from other people who have experience with DeepFreeze or any similar software. What should we be careful about? Do the pros outweigh the cons? What gains or problems am I not seeing? Thanks.

  Read the article

< Previous Page | 906 907 908 909 910 911 912 913 914 915 916 917  | Next Page >