Search Results

Search found 18155 results on 727 pages for 'output'.

Page 91/727 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• No HDMI Audio with GeForce 9600GT and nForce board

  - by Bobby

  I've been trying to get HDMI with sound working for the last few days, and I'm a little bit out of ideas. (I've verified that the hardware/Setup works via Windows.) aplay does not list my HDMI device: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 I've already compiled the alsa drivers (1.0.24) from a snapshot (with --with-oss=no) and added the line options snd-hda-intel model=auto # Tried 3stack-dig and 6stack-dig too to /etc/modprobe.d/alsa-base.conf. Still, the device does not show up. If it is important, the HDMI TV is at the moment not configured to be part of the X session (I've tried that to, at least with X restart, and it didn't change anything). What did I miss? $ lspci 00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2) 00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2) 00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1) 00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1) 00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1) 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1) 00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2) 00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2) 02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)   $ aplay -L default pulse Playback/recording through the PulseAudio sound server front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions

  Read the article

• Solving Euler Project Problem Number 1 with Microsoft Axum

  - by Jeff Ferguson

  Note: The code below applies to version 0.3 of Microsoft Axum. If you are not using this version of Axum, then your code may differ from that shown here. I have just solved Problem 1 of Project Euler using Microsoft Axum. The problem statement is as follows: If we list all the natural numbers below 10 that are multiples of 3 or 5, we get 3, 5, 6 and 9. The sum of these multiples is 23. Find the sum of all the multiples of 3 or 5 below 1000. My Axum-based solution is as follows: namespace EulerProjectProblem1{ // http://projecteuler.net/index.php?section=problems&id=1 // // If we list all the natural numbers below 10 that are multiples of 3 or 5, we get 3, 5, 6 and 9. // The sum of these multiples is 23. // Find the sum of all the multiples of 3 or 5 below 1000. channel SumOfMultiples { input int Multiple1; input int Multiple2; input int UpperBound; output int Sum; } agent SumOfMultiplesAgent : channel SumOfMultiples { public SumOfMultiplesAgent() { int Multiple1 = receive(PrimaryChannel::Multiple1); int Multiple2 = receive(PrimaryChannel::Multiple2); int UpperBound = receive(PrimaryChannel::UpperBound); int Sum = 0; for(int Index = 1; Index < UpperBound; Index++) { if((Index % Multiple1 == 0) || (Index % Multiple2 == 0)) Sum += Index; } PrimaryChannel::Sum <-- Sum; } } agent MainAgent : channel Microsoft.Axum.Application { public MainAgent() { var SumOfMultiples = SumOfMultiplesAgent.CreateInNewDomain(); SumOfMultiples::Multiple1 <-- 3; SumOfMultiples::Multiple2 <-- 5; SumOfMultiples::UpperBound <-- 1000; var Sum = receive(SumOfMultiples::Sum); System.Console.WriteLine(Sum); System.Console.ReadLine(); PrimaryChannel::ExitCode <-- 0; } }} Let’s take a look at the various parts of the code. I begin by setting up a channel called SumOfMultiples that accepts three inputs and one output. The first two of the three inputs will represent the two possible multiples, which are three and five in this case. The third input will represent the upper bound of the problem scope, which is 1000 in this case. The lone output of the channel represents the sum of all of the matching multiples: channel SumOfMultiples{ input int Multiple1; input int Multiple2; input int UpperBound; output int Sum;} I then set up an agent that uses the channel. The agent, called SumOfMultiplesAgent, received the three inputs from the channel sent to the agent, stores the results in local variables, and performs the for loop that iterates from 1 to the received upper bound. The agent keeps track of the sum in a local variable and stores the sum in the output portion of the channel: agent SumOfMultiplesAgent : channel SumOfMultiples{ public SumOfMultiplesAgent() { int Multiple1 = receive(PrimaryChannel::Multiple1); int Multiple2 = receive(PrimaryChannel::Multiple2); int UpperBound = receive(PrimaryChannel::UpperBound); int Sum = 0; for(int Index = 1; Index < UpperBound; Index++) { if((Index % Multiple1 == 0) || (Index % Multiple2 == 0)) Sum += Index; } PrimaryChannel::Sum <-- Sum; }} The application’s main agent, therefore, simply creates a new SumOfMultiplesAgent in a new domain, prepares the channel with the inputs that we need, and then receives the Sum from the output portion of the channel: agent MainAgent : channel Microsoft.Axum.Application{ public MainAgent() { var SumOfMultiples = SumOfMultiplesAgent.CreateInNewDomain(); SumOfMultiples::Multiple1 <-- 3; SumOfMultiples::Multiple2 <-- 5; SumOfMultiples::UpperBound <-- 1000; var Sum = receive(SumOfMultiples::Sum); System.Console.WriteLine(Sum); System.Console.ReadLine(); PrimaryChannel::ExitCode <-- 0; }} The result of the calculation (which, by the way, is 233,168) is sent to the console using good ol’ Console.WriteLine().

  Read the article

• SSIS Technique to Remove/Skip Trailer and/or Bad Data Row in a Flat File

  - by Compudicted

  I noticed that the question on how to skip or bypass a trailer record or a badly formatted/empty row in a SSIS package keeps coming back on the MSDN SSIS Forum. I tried to figure out the reason why and after an extensive search inside the forum and outside it on the entire Web (using several search engines) I indeed found that it seems even thought there is a number of posts and articles on the topic none of them are employing the simplest and the most efficient technique. When I say efficient I mean the shortest time to solution for the fellow developers. OK, enough talk. Let’s face the problem: Typically a flat file (e.g. a comma delimited/CSV) needs to be processed (loaded into a database in most cases really). Oftentimes, such an input file is produced by some sort of an out of control, 3-rd party solution and would come in with some garbage characters and/or even malformed/miss-formatted rows. One such example could be this imaginary file: As you can see several rows have no data and there is an occasional garbage character (1, in this example on row #7). Our task is to produce a clean file that will only capture the meaningful data rows. As an aside, our output/target may be a database table, but for the purpose of this exercise we will simply re-format the source. Let’s outline our course of action to start off: Will use SSIS 2005 to create a DFT; The DFT will use a Flat File Source to our input [bad] flat file; We will use a Conditional Split to process the bad input file; and finally Dump the resulting data to a new [clean] file. Well, only four steps, let’s see if it is too much of work. 1: Start the BIDS and add a DFT to the Control Flow designer (I named it Process Dirty File DFT): 2, and 3: I had added the data viewer to just see what I am getting, alas, surprisingly the data issues were not seen it:   What really is the key in the approach it is to properly set the Conditional Split Transformation. Visually it is: and specifically its SSIS Expression LEN([After CS Column 0]) > 1 The point is to employ the right Boolean expression (yes, the Conditional Split accepts only Boolean conditions). For the sake of this post I re-named the Output Name “No Empty Rows”, but by default it will be named Case 1 (remember to drag your first column into the expression area)! You can close your Conditional Split now. The next part will be crucial – consuming the output of our Conditional Split. Last step - #4: Add a Flat File Destination or any other one you need. Click on the Conditional Split and choose the green arrow to drop onto the target. When you do so make sure you choose the No Empty Rows output and NOT the Conditional Split Default Output. Make the necessary mappings. At this point your package must look like: As the last step will run our package to examine the produced output file. F5: and… it looks great!

  Read the article

• Controlling soft errors and false alarms in SSIS

  - by Jim Giercyk

  If you are like me, you dread the 3AM wake-up call.  I would say that the majority of the pages I get are false alarms.  The alerts that require action often require me to open an SSIS package, see where the trouble is and try to identify the offending data.  That can be very time-consuming and can take quite a chunk out of my beauty sleep.  For those reasons, I have developed a simple error handling scenario for SSIS which allows me to rest a little easier.  Let me first say, this is a high level discussion; getting into the nuts and bolts of creating each shape is outside the scope of this document, but if you have an average understanding of SSIS, you should have no problem following along. In the Data Flow above you can see that there is a caution triangle.  For the purpose of this discussion I am creating a truncation error to demonstrate the process, so this is to be expected.  The first thing we need to do is to redirect the error output.  Double-clicking on the Query shape presents us with the properties window for the input.  Simply set the columns that you want to redirect to Redirect Row in the dropdown box and hit Apply. Without going into a dissertation on error handling, I will just note that you can decide which errors you want to redirect on Error and on Truncation.  Therefore, to override this process for a column or condition, simply do not redirect that column or condition. The next thing we want to do is to add some information about the error; specifically, the name of the package which encountered the error and which step in the package wrote the record to the error table.  REMEMBER: If you redirect the error output, your package will not fail, so you will not know where the error record was created without some additional information.    I added 3 columns to my error record; Severity, Package Name and Step Name.  Severity is just a free-form column that you can use to note whether an error is fatal, whether the package is part of a test job and should be ignored, etc.  Package Name and Step Name are system variables. In my package I have created a truncation situation, where the firstname column is 50 characters in the input, but only 4 characters in the output.  Some records will pass without truncation, others will be sent to the error output.  However, the package will not fail. We can see that of the 14 input rows, 8 were redirected to the error table. This information can be used by another step or another scheduled process or triggered to determine whether an error should be sent.  It can also be used as a historical record of the errors that are encountered over time.  There are other system variables that might make more sense in your infrastructure, so try different things.  Date and time seem like something you would want in your output for example.  In summary, we have redirected the error output from an input, added derived columns with information about the errors, and inserted the information and the offending data into an error table.  The error table information can be used by another step or process to determine, based on the error information, what level alert must be sent.  This will eliminate false alarms, and give you a head start when a genuine error occurs.

  Read the article

• Caesar Cipher Program In C++ [migrated]

  - by xaliap81

  I am trying to write a caesar cipher program in c++. This is my codes template: int chooseKEY (){ //choose key shift from 1-26 } void encrypt (char * w, char *e, int key) { //Encryption function, *w is the text in the beginning, the *e is the encrypted text //Encryption in being made only in letters noy in numbers and punctuations // *e = *w + key } void decrypt (char * e, char *w, int key) { // Decryption function, *e is the text in the beginning, the *w is the decrypted text //Dencryption in being made only in letters no numbers and punctuations // *w = *e - key } void Caesar (char * inputFile, char * outputFile, int key, int mode) { // Read the inputfile which contains some data. If mode ==1 then the data is being //encrypted else if mode == 0 the data is being decrypted and is being written in //the output file } void main() { // call the Caesar function } The program has four functions, chooseKey function have to return an int as a shift key from 1-26. Encrypt function has three parameters, *w is the text in the beginning, *e is the encrypted text and the key is from the choosekey function.For encryption : Only letters have to be encrypted not numbers or punctuation and the letters are counting cyclic. Decrypt function has three parameters *e is the encrypted text, *w is the beginning text and the key. Caesar function has four parameters, inputfile which is the file that contains the beginning text, output file which contains the encrypted text, the key and the mode (if mode==1) encryption, (mode ==0) decryption. This is my sample code: #include <iostream> #include <fstream> using namespace std; int chooseKey() { int key_number; cout << "Give a number from 1-26: "; cin >> key_number; while(key_number<1 || key_number>26) { cout << "Your number have to be from 1-26.Retry: "; cin >> key_number; } return key_number; } void encryption(char *w, char *e, int key){ char *ptemp = w; while(*ptemp){ if(isalpha(*ptemp)){ if(*ptemp>='a'&&*ptemp<='z') { *ptemp-='a'; *ptemp+=key; *ptemp%=26; *ptemp+='A'; } } ptemp++; } w=e; } void decryption (char *e, char *w, int key){ char *ptemp = e; while(*ptemp){ if(isalpha(*ptemp)) { if(*ptemp>='A'&&*ptemp<='Z') { *ptemp-='A'; *ptemp+=26-key; *ptemp%=26; *ptemp+='a'; } } ptemp++; } e=w; } void Caesar (char *inputFile, char *outputFile, int key, int mode) { ifstream input; ofstream output; char buf, buf1; input.open(inputFile); output.open(outputFile); buf=input.get(); while(!input.eof()) { if(mode == 1){ encryption(&buf, &buf1, key); }else{ decryption(&buf1, &buf, key); } output << buf; buf=input.get(); } input.close(); output.close(); } int main(){ int key, mode; key = chooseKey(); cout << "1 or 0: "; cin >> mode; Caesar("test.txt","coded.txt",key,mode); system("pause"); } I am trying to run the code and it is being crashed (Debug Assertion Failed). I think the problem is somewhere inside Caesar function.How to call the encrypt and decrypt functions. But i don't know what exactly is. Any ideas?

  Read the article

• How to use data of one table in 'where' clause of another table?

  - by sahar

  hello, i need ur help guys..i m making website for 'home docor ideas'..i have a log in form(login-form.php) in which when 'log in' and 'password' is inserted,after verification through login-execute.php, redirected to viewOrder.php where user can view all of the orders ordered by clients.. all is fine up till here.. but what i want is,when user get logged in ,he view only that order which is ordered by him not all customer's orders.. two tables are there in database: members and order_insert.. in 'members' table, login and password is stored and in 'order_insert',orders of customers is stored.. codes of these three pages is as follows.. ......................... login-form.php ......................... <form id="loginForm" name="loginForm" method="post" action="login-exec.php"> <table width="300" border="0" align="center" cellpadding="2" cellspacing="0"> <tr> <td width="112"><b>Login</b></td> <td width="188"><input name="login" type="text" class="textfield" id="login" /></td> </tr> <tr> <td><b>Password</b></td> <td><input name="password" type="password" class="textfield" id="password" /></td> </tr> <tr> <td>&nbsp;</td> <td><input type="submit" name="Submit" value="Login" /></td> </tr> </table> </form> ......................... login-execute.php ......................... <?php //Start session session_start(); //Include database connection details require_once('config.php'); //Array to store validation errors $errmsg_arr = array(); //Validation error flag $errflag = false; //Connect to mysql server $link = mysql_connect(DB_HOST, DB_USER, DB_PASSWORD); if(!$link) { die('Failed to connect to server: ' . mysql_error()); } //Select database $db = mysql_select_db(DB_DATABASE); if(!$db) { die("Unable to select database"); } //Function to sanitize values received from the form. Prevents SQL injection function clean($str) { $str = @trim($str); if(get_magic_quotes_gpc()) { $str = stripslashes($str); } return mysql_real_escape_string($str); } //Sanitize the POST values $login = clean($_POST['login']); $password = clean($_POST['password']); //Input Validations if($login == '') { $errmsg_arr[] = 'Login ID missing'; $errflag = true; } if($password == '') { $errmsg_arr[] = 'Password missing'; $errflag = true; } //If there are input validations, redirect back to the login form if($errflag) { $_SESSION['ERRMSG_ARR'] = $errmsg_arr; session_write_close(); header("location: login-form.php"); exit(); } //Create query $qry="SELECT * FROM members WHERE login='$login' AND passwd='".md5($_POST['password'])."'"; $result=mysql_query($qry); //Check whether the query was successful or not if($result) { if(mysql_num_rows($result) == 1) { //Login Successful session_regenerate_id(); $member = mysql_fetch_assoc($result); $_SESSION['SESS_MEMBER_ID'] = $member['member_id']; $_SESSION['SESS_FIRST_NAME'] = $member['firstname']; $_SESSION['SESS_LAST_NAME'] = $member['lastname']; session_write_close(); header("location: viewOrder.php"); exit(); }else { //Login failed header("location: login-failed.php"); exit(); } }else { die("Query failed"); } ?> ............................. viewOrder.php .............................. <html> <body bgcolor="#FFFFFF" > <? $host="localhost"; // Host name $username="root"; // Mysql username $password=""; // Mysql password $db_name="mydatabase"; // Database name $tbl_name="order_insert"; // Table name $tbl_name2="members"; // connect to server and databases mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); $result = mysql_query("SELECT * FROM $tbl_name "); print "<center>"; $output .= "<table width=1100 border=1 bordercolor=black>"; $output .= "<tr align=center><td>ID</td><td>First Name</td><td>Last Name</td><td>E Mail</td><td> City </td><td> Country </td><td> Phone</td><td>Decoration Type</td><td>Service Description</td><td>Budget</td><td>Update</td><td>Delete</td></tr>"; $output .= "<th></th><th></th>"; $output .= "</tr>\n\n"; while ($row = mysql_fetch_assoc($result)){ $output .= "<tr>\n"; foreach ($row as $col=>$val){ $output .= " <td>$val</td>\n"; } // end foreach $keyVal = $row["id"]; $output .= "<td><a href='update.php?ID=$row[orderId]' >Update </a></td>"; $output .= "<td><a href='delete.php?ID=$row[orderId]' >Delete </a></td>"; $output .= "</tr>\n\n"; }// end while $output .= "</table></center>"; print "$output"; ?>&nbsp;&nbsp;&nbsp;<br> <br> <center><table > <tr><td> <form action="home.php"><font color="#FF0000"><input type="submit" name="btn" style="color:#CC0000" value="<--Back" ></font></form></td></tr></table></center> </body> </html> ..... your help and suggestions will be appreciated

  Read the article

• how to import csv data into django models

  - by little_fish

  i have some csv data and i want to export into django models the example of csv data 1;"02-01-101101";"Worm Gear HRF 50";"Ratio 1 : 10";"input shaft, output shaft, direction A, color dark green"; 2;"02-01-101102";"Worm Gear HRF 50";"Ratio 1 : 20";"input shaft, output shaft, direction A, color dark green"; 3;"02-01-101103";"Worm Gear HRF 50";"Ratio 1 : 30";"input shaft, output shaft, direction A, color dark green"; 4;"02-01-101104";"Worm Gear HRF 50";"Ratio 1 : 40";"input shaft, output shaft, direction A, color dark green"; 5;"02-01-101105";"Worm Gear HRF 50";"Ratio 1 : 50";"input shaft, output shaft, direction A, color dark green"; and i have some django models name Product in Product there is some fields like name, description and price and i want to something like this product=Product() product.name = "Worm Gear HRF 70(02-01-101116)" product.description = "input shaft, output shaft, direction A, color dark green" product.price = 100

  Read the article

• Mutation Problem - Clojure

  - by Silanglaya Valerio

  having trouble changing an element of my function represented as a list. code for random function: (defn makerandomtree-10 [pc maxdepth maxwidth fpx ppx] (if-let [output (if (and (< (rand) fpx) (> maxdepth 0)) (let [head (nth operations (rand-int (count operations))) children (doall (loop[function (list) width maxwidth] (if (pos? width) (recur (concat function (list (makerandomtree-10 pc (dec maxdepth) (+ 2 (rand-int (- maxwidth 1))) fpx ppx))) (dec width)) function)))] (concat (list head) children)) (if (and (< (rand) ppx) (>= pc 0)) (nth parameters (rand-int (count parameters))) (rand-int 100)))] output )) I will provide also a mutation function, which is still not good enough. I need to be able to eval my statement, so the following is still insufficient. (defn mutate-5 "chooses a node changes that" [function pc maxwidth pchange] (if (< (rand) pchange) (let [output (makerandomtree-10 pc 3 maxwidth 0.5 0.6)] (if (seq? output) output (list output))) ;mutate the children of root ;declare an empty accumulator list, with root as its head (let [head (list (first function)) children (loop [acc(list) walker (next function)] (println "----------") (println walker) (println "-----ACC-----") (println acc) (if (not walker) acc (if (or (seq? (first function)) (contains? (set operations) (first function))) (recur (concat acc (mutate-5 walker pc maxwidth pchange)) (next walker)) (if (< (rand) pchange) (if (some (set parameters) walker) (recur (concat acc (list (nth parameters (rand-int (count parameters))))) (if (seq? walker) (next walker) nil)) (recur (concat acc (list (rand-int 100))) (if (seq? walker) (next walker) nil))) (recur acc (if (seq? walker) (next walker) nil)))) ))] (concat head (list children))))) (side note: do you have any links/books for learning clojure?)

  Read the article

• Issue on file existence in C

  - by darkie15

  Hi All, Here is my code which checks if the file exists : #include<stdio.h> #include<zlib.h> #include<unistd.h> #include<string.h> int main(int argc, char *argv[]) { char *path=NULL; FILE *file = NULL; char *fileSeparator = "/"; size_t size=100; int index ; printf("\nArgument count is = %d", argc); if (argc <= 1) { printf("\nUsage: ./output filename1 filename2 ..."); printf("\n The program will display human readable information about the PNG file provided"); } else if (argc > 1) { for (index = 1; index < argc;index++) { path = getcwd(path, size); strcat(path, fileSeparator); printf("\n File name entered is = %s", argv[index]); strcat(path,argv[index]); printf("\n The complete path of the file name is = %s", path); if (access(path, F_OK) != -1) { printf("File does exist"); } else { printf("File does not exist"); } path=NULL; } } return 0; } On running the command ./output test.txt test2.txt The output is: $ ./output test.txt test2.txt Argument count is = 3 File name entered is = test.txt The complete path of the file name is = /home/welcomeuser/test.txt File does not exist File name entered is = test2.txt The complete path of the file name is = /home/welcomeuser/test2.txt File does not exist Now test.txt does exist on the system: $ ls assignment.c output.exe output.exe.stackdump test.txt and yet test.txt is shown as a file not existing. Please help me understand the issue here. Also, please feel free to post any suggestions to improve the code/avoid a bug. Regards, darkie

  Read the article

• Dell 15Z. Trying to output image using Mini Displayport to a Yamasaki Q270. (2560 x 1440) rez monitor. Dual DVI-D to Mini Displayport

  - by michaelcku

  I have a Dell 15Z. GT525M Video card. Updated Driver via NVIDIA. Problem is I just purchased a Yamasaki Catleap Q270 monitor. It is a (2560x1440) monitor with only a Dual DVI-D out. 15Z only has HDMI and a Mini Display Port. I got a Active Dual DVI-D to Mini Display Port Active Adapter(Linked Below). http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802&p_id=6904&seq=1&format=2 The Setup works when i plug it into my Macbook air 13.3. However when I plug it into my 15Z it doesn't work. Tried everything I can thank of. Window control P. FN and F1. It just doesn't work. I believe the issue lies in the Mini Display Port but i can't be sure. No matter what i do, the Mini Display Port doesn't get recognized. Spent 3 hours on the phone with the XPS Tech team. They simply said it was not compatible.... Any help or suggestion would be greatly appreciated.

  Read the article

• elisp compile, add a regexp to error detection

  - by Gauthier

  I am starting with emacs, and don't know much elisp. Nearly nothing, really. I want to use ack as a replacement of grep. These are the instructions I followed to use ack from within emacs: http://www.rooijan.za.net/?q=ack_el Now I don't like the output format that is used in this el file, I would like the output to be that of ack --group. So I changed: (read-string "Ack arguments: " "-i" nil "-i" nil) to: (read-string "Ack arguments: " "-i --group" nil "-i --group" nil) So far so good. But this made me lose the ability to click-press_enter on the rows of the output buffer. In the original behaviour, compile-mode was used to be able to jump to the selected line. I figured I should add a regexp to the ack-mode. The ack-mode is defined like this: (define-compilation-mode ack-mode "Ack" "Specialization of compilation-mode for use with ack." nil) and I want to add the regexp [0-9]+: to be detected as an error too, since it is what every row of the output bugger includes (line number). I've tried to modify the define-compilation-modeabove to add the regexp, but I failed miserably. How can I make the output buffer of ack let me click on its rows? --- EDIT, I tried also: --- (defvar ack-regexp-alist '(("[0-9]+:" 2 3)) "Alist that specifies how to match rows in ack output.") (setq compilation-error-regexp-alist (append compilation-error-regexp-alist ack-regexp-alist)) I stole that somewhere and tried to adapt to my needs. No luck.

  Read the article

• Increase Query Speed in PostgreSQL

  - by Anthoni Gardner

  Hello, First time posting here, but an avid reader. I am experiancing slow query times on my database (all tested locally thus far) and not sure how to go about it. The database itself has 44 tables and some of them tables have over 1 Million records (mainly the movies, actresses and actors tables). The table is made via JMDB using the flat files on IMDB. Also the SQL query that I am about to show is from that said program (that too experiances very slow search times). I have tried to include as much information as I can, such as the explain plan etc. "QUERY PLAN" "HashAggregate (cost=46492.52..46493.50 rows=98 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Append (cost=39094.17..46491.79 rows=98 width=46)" " - HashAggregate (cost=39094.17..39094.87 rows=70 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Seq Scan on movies (cost=0.00..39093.65 rows=70 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " Filter: (((title)::text ~~* '%Babe%'::text) AND ((title)::text !~~* '""%}'::text))" " - Nested Loop (cost=0.00..7395.94 rows=28 width=46)" " Output: public.movies.title, public.movies.movieid, public.movies.year" " - Seq Scan on akatitles (cost=0.00..7159.24 rows=28 width=4)" " Output: akatitles.movieid, akatitles.language, akatitles.title, " Filter: (((title)::text ~~* '%Babe%'::text) AND ((title)::text !~~* '""%}'::text))" " - Index Scan using movies_pkey on movies (cost=0.00..8.44 rows=1 width=46)" " Output: public.movies.movieid, public.movies.title, public.movies.year, public.movies.imdbid" " Index Cond: (public.movies.movieid = akatitles.movieid)" SELECT * FROM ((SELECT DISTINCT title, movieid, year FROM movies WHERE title ILIKE '%Babe%' AND NOT (title ILIKE '"%}')) UNION (SELECT movies.title, movies.movieid, movies.year FROM movies INNER JOIN akatitles ON movies.movieid=akatitles.movieid WHERE akatitles.title ILIKE '%Babe%' AND NOT (akatitles.title ILIKE '"%}'))) AS union_tmp2; Returns 612 Rows in 9078ms Database backup (plain text) is 1.61GB It's a really complex query and I am not fully cognizant on it, like I said it was spat out by JMDB. Do you have any suggestions on how I can increase the speed ? Regards Anthoni

  Read the article

• Setting project for eclipse using maven

  - by egaga

  Hi, I'm trying to start modifying an existing application with Eclipse. Actually I had it working before, but I deleted the project, and now with "mvn eclipse:eclipse" I get the following: [INFO] Resource directory's path matches an existing source directory. Resources will be merged with the source directory src/main/resources [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Request to merge when 'filtering' is not identical. Original=resource src/main/resources: output=target/classes, include=[atlassian-plugin.xml], exclude=[**/*.java], test=false, filtering=true, merging with=resource src/main/resources: output=target/classes, include=[], exclude=[atlassian-plugin.xml|**/*.java], test=false, filtering=false [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.lifecycle.LifecycleExecutionException: Request to merge when 'filtering' is not identical. Original=resource src/main/resources: output=target/classes, include=[atlassian-plugin.xml], exclude=[**/*.java], test=false, filtering=true, merging with=resource src/main/resources: output=target/classes, include=[], exclude=[atlassian-plugin.xml|**/*.java], test=false, filtering=false at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:583) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandaloneGoal(DefaultLifecycleExecutor.java:512) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:482) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:330) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:291) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:142) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:336) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:129) at org.apache.maven.cli.MavenCli.main(MavenCli.java:287) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.plugin.MojoExecutionException: Request to merge when 'filtering' is not identical. Original=resource src/main/resources: output=target/classes, include=[atlassian-plugin.xm l], exclude=[**/*.java], test=false, filtering=true, merging with=resource src/main/resources: output=target/classes, include=[], exclude=[atlassian-plugin.xml|**/*.java], test=false, filtering=false at org.apache.maven.plugin.eclipse.EclipseSourceDir.merge(EclipseSourceDir.java:302) at org.apache.maven.plugin.eclipse.EclipsePlugin.extractResourceDirs(EclipsePlugin.java:1605) at org.apache.maven.plugin.eclipse.EclipsePlugin.buildDirectoryList(EclipsePlugin.java:1490) at org.apache.maven.plugin.eclipse.EclipsePlugin.createEclipseWriterConfig(EclipsePlugin.java:1180) at org.apache.maven.plugin.eclipse.EclipsePlugin.writeConfiguration(EclipsePlugin.java:1043) at org.apache.maven.plugin.ide.AbstractIdeSupportMojo.execute(AbstractIdeSupportMojo.java:511) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:451) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:558) ... 16 more

  Read the article

• Convert UCS-2 characters to UTF-8 Using C#

  - by quanticle

  I'm pulling some internationalized text from a MS SQL Server 2005 database. As per the defaults for that DB, the characters are stored as UCS-2. However, I need to output the data in UTF-8 format, as I'm sending it out over the web. Currently, I have the following code to convert: SqlString dbString = resultReader.GetSqlString(0); byte[] dbBytes = dbString.GetUnicodeBytes(); byte[] utf8Bytes = System.Text.Encoding.Convert(System.Text.Encoding.Unicode, System.Text.Encoding.UTF8, dbBytes); System.Text.UTF8Encoding encoder = new System.Text.UTF8Encoding(); string outputString = encoder.GetString(utf8Bytes); However, when I examine the output in the browser, it appears to be garbage, no matter what I set the encoding to. What am I missing? EDIT: In response to the answers below, the reason I thought I had to perform a conversion is because I can output literal multibyte strings just fine. For example: OutputControl.Text = "????????????????????????????????????????????????????????????????"; works. Here, OutputControl is an ASP.Net Literal. However, OutputControl.Text = outputString; //Output from above snippet results in mangled output as described above. My hypothesis was that the database's output was somehow getting mangled by ASP.Net. If that's not the case, then what are some other possibilities?

  Read the article

• use exec for dsadd

  - by Daryl Gill

  I'm Programming on a Windows Server 2008 and I wish to have a WebUI to interact with the domains active directory. One of my main problems is this that i'm using dsadd from a HTML form but this is no succeeding. I know my command is correct, I have tested it out on the Servers Command line My Code is As Below: if (isset($_POST['Submit'])) { $DesiredUsername = $_POST['DesiredUsername']; $DesiredPassword = $_POST['DesiredPassword']; $DU = "{$DesiredUsername}"; // Desired Username $OU = "PHPCreatedUsers"; // Domain OU $DC1 = "slayerserv"; // Domain Part one $DC2 = "local"; // Domain Part Two $PWD = "{$DesiredPassword}"; // Password $ExecScript = 'dsadd user cn=$DesiredUsername,cn=PHPCreatedUsers,dc=slayerserv,dc=local -disabled no -pwd $DesiredPassword -mustchpwd yes'; exec($ExecScript, $output); mysql_query("INSERT INTO addedusers (`ID`, `DU`, `OU`, `DC1`, `DC2, `PWD`) VALUES ('', '$DU', '$OU', '$DC1', '$DC2', '$PWD')"); echo "<br><br>"; print_r($output); # echo "User: $DesiredUsername Has been Created"; } When I print_r($output); it Returns a blank array: Array ( ) Could anyone provide me with a solution or point me in the right direction? ++++ Below is a working example of my usage of exec $Script = 'ping 127.0.0.1 -n 1'; exec($Script, $Output); print_r($Output); print_r($Output); Gives: Array ( [0] = [1] = Pinging 127.0.0.1 with 32 bytes of data: [2] = Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 [3] = [4] = Ping statistics for 127.0.0.1: [5] = Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), [6] = Approximate round trip times in milli-seconds: [7] = Minimum = 0ms, Maximum = 0ms, Average = 0ms )

  Read the article

• share the same cookie between two website using PHP cURL extension

  - by powerboy

  I want to get the contents of some emails in my gmail account. I would like to use the PHP cURL extension to do this. I followed these steps in my first try: In the PHP code, output the contents of https://www.google.com/accounts/ServiceLoginAuth. In the browser, the user input username and password to login. In the PHP code, save cookies in a file named cookie.txt. In the PHP code, send request to https://mail.google.com/ along with cookies retrieved from cookie.txt and output the contents. The following code does not work: $login_url = 'https://www.google.com/accounts/ServiceLoginAuth'; $gmail_url = 'https://mail.google.com/'; $cookie_file = dirname(__FILE__) . '/cookie.txt'; $ch = curl_init(); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true); curl_setopt($ch, CURLOPT_COOKIEJAR, $cookie_file); curl_setopt($ch, CURLOPT_URL, $login_url); $output = curl_exec($ch); echo $output; curl_setopt($ch, CURLOPT_URL, $gmail_url); curl_setopt($ch, CURLOPT_COOKIEFILE, $cookie_file); $output = curl_exec($ch); echo $output; curl_close($ch);

  Read the article

• Bilinear interpolation - DirectX vs. GDI+

  - by holtavolt

  I have a C# app for which I've written GDI+ code that uses Bitmap/TextureBrush rendering to present 2D images, which can have various image processing functions applied. This code is a new path in an application that mimics existing DX9 code, and they share a common library to perform all vector and matrix (e.g. ViewToWorld/WorldToView) operations. My test bed consists of DX9 output images that I compare against the output of the new GDI+ code. A simple test case that renders to a viewport that matches the Bitmap dimensions (i.e. no zoom or pan) does match pixel-perfect (no binary diff) - but as soon as the image is zoomed up (magnified), I get very minor differences in 5-10% of the pixels. The magnitude of the difference is 1 (occasionally 2)/256. I suspect this is due to interpolation differences. Question: For a DX9 ortho projection (and identity world space), with a camera perpendicular and centered on a textured quad, is it reasonable to expect DirectX.Direct3D.TextureFilter.Linear to generate identical output to a GDI+ TextureBrush filled rectangle/polygon when using the System.Drawing.Drawing2D.InterpolationMode.Bilinear setting? For this (magnification) case, the DX9 code is using this (MinFilter,MipFilter set similarly): Device.SetSamplerState(0, SamplerStageStates.MagFilter, (int)TextureFilter.Linear); and the GDI+ path is using: g.InterpolationMode = InterpolationMode.Bilinear; I thought that "Bilinear Interpolation" was a fairly specific filter definition, but then I noticed that there is another option in GDI+ for "HighQualityBilinear" (which I've tried, with no difference - which makes sense given the description of "added prefiltering for shrinking") Followup Question: Is it reasonable to expect pixel-perfect output matching between DirectX and GDI+ (assuming all external coordinates passed in are equal)? If not, why not? Finally, there are a number of other APIs I could be using (Direct2D, WPF, GDI, etc.) - and this question generally applies to comparing the output of "equivalent" bilinear interpolated output images across any two of these. Thanks!

  Read the article

• std::string.resize() and std::string.length()

  - by dreamlax

  I'm relatively new to C++ and I'm still getting to grips with the C++ Standard Library. To help transition from C, I want to format a std::string using printf-style formatters. I realise stringstream is a more type-safe approach, but I find myself finding printf-style much easier to read and deal with (at least, for the time being). This is my function: using namespace std; string formatStdString(const string &format, ...) { va_list va; string output; size_t needed; size_t used; va_start(va, format); needed = vsnprintf(&output[0], 0, format.c_str(), va); output.resize(needed + 1); // for null terminator?? used = vsnprintf(&output[0], output.capacity(), format.c_str(), va); // assert(used == needed); va_end(va); return output; } This works, kinda. A few things that I am not sure about are: Do I need to make room for a null terminator, or is this unnecessary? Is capacity() the right function to call here? I keep thinking length() would return 0 since the first character in the string is a '\0'. Occasionally while writing this string's contents to a socket (using its c_str() and length()), I have null bytes popping up on the receiving end, which is causing a bit of grief, but they seem to appear inconsistently. If I don't use this function at all, no null bytes appear.

  Read the article

• Replace without the replace function

  - by Molly Potter

  Assignment: Let X and Y be two words. Find/Replace is a common word processing operation that finds each occurrence of word X and replaces it with word Y in a given document. Your task is to write a program that performs the Find/Replace operation. Your program will prompt the user for the word to be replaced (X), then the substitute word (Y ). Assume that the input document is named input.txt. You must write the result of this Find/Replace operation to a file named output.txt. Lastly, you cannot use the replace() string function built into Python (it would make the assignment much too easy). To test your code, you should modify input.txt using a text editor such as Notepad or IDLE to contain different lines of text. Again, the output of your code must look exactly like the sample output. This is my code: input_data = open('input.txt','r') #this opens the file to read it. output_data = open('output.txt','w') #this opens a file to write to. userStr= (raw_input('Enter the word to be replaced:')) #this prompts the user for a word userReplace =(raw_input('What should I replace all occurences of ' + userStr + ' with?')) #this prompts the user for the replacement word for line in input_data: words = line.split() if userStr in words: output_data.write(line + userReplace) else: output_data.write(line) print 'All occurences of '+userStr+' in input.txt have been replaced by '+userReplace+' in output.txt' #this tells the user that we have replaced the words they gave us input_data.close() #this closes the documents we opened before output_data.close() It won't replace anything in the output file. Help!

  Read the article

• Other test cases for this openFile function?

  - by igor

  I am trying to figure out why my function to open a file is failing this autograder I submit my homework into. What type of input would fail here, I can't think of anything else? Code: bool openFile(ifstream& ins) { char fileName[256]; cout << "Enter board filename: "; cin.getline(fileName,256); cout << endl << fileName << endl; ins.open(fileName); if(!ins) { ins.clear(); cout<<"Error opening file"<<endl; return false; } return true; } Here is output from the 'Autograder' of what my program's output is, and what the correct output is supposed to be (and I do not know what is in the file they use for the input) Autograder output: ******************************************* ***** ***** ***** Your output is: ***** ***** ***** ******************************************* Testing function openFile Enter board filename: test.txt 1 Enter board filename: not a fileName Error opening file 0 ******************************************* ***** ***** ***** Correct Output ***** ***** ***** ******************************************* Testing function openFile Enter board filename: 1 Enter board filename: Error opening file 0

  Read the article

• Need a better way to execute console commands from python and log the results

  - by Wim Coenen

  I have a python script which needs to execute several command line utilities. The stdout output is sometimes used for further processing. In all cases, I want to log the results and raise an exception if an error is detected. I use the following function to achieve this: def execute(cmd, logsink): logsink.log("executing: %s\n" % cmd) popen_obj = subprocess.Popen(\ cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE) (stdout, stderr) = popen_obj.communicate() returncode = popen_obj.returncode if (returncode <> 0): logsink.log(" RETURN CODE: %s\n" % str(returncode)) if (len(stdout.strip()) > 0): logsink.log(" STDOUT:\n%s\n" % stdout) if (len(stderr.strip()) > 0): logsink.log(" STDERR:\n%s\n" % stderr) if (returncode <> 0): raise Exception, "execute failed with error output:\n%s" % stderr return stdout "logsink" can be any python object with a log method. I typically use this to forward the logging data to a specific file, or echo it to the console, or both, or something else... This works pretty good, except for three problems where I need more fine-grained control than the communicate() method provides: stdout and stderr output can be interleaved on the console, but the above function logs them separately. This can complicate the interpretation of the log. How do I log stdout and stderr lines interleaved, in the same order as they were output? The above function will only log the command output once the command has completed. This complicates diagnosis of issues when commands get stuck in an infinite loop or take a very long time for some other reason. How do I get the log in real-time, while the command is still executing? If the logs are large, it can get hard to interpret which command generated which output. Is there a way to prefix each line with something (e.g. the first word of the cmd string followed by :).

  Read the article

• Combining XmlWriter objects?

  - by Kevin

  The way my application is structured, each component generates output as XML and returns an XmlWriter object. Before rendering the final output to the page, I combine all XML and perform an XSL transformation on that object. Below, is a simplified code sample of the application structure. Does it make sense to combine XmlWriter objects like this? Is there a better way to structure my application? The optimal solution would be one where I didn't have to pass a single XmlWriter instance as a parameter to each component. function page1Xml() { $content = new XmlWriter(); $content->openMemory(); $content->startElement('content'); $content->text('Sample content'); $content->endElement(); return $content; } function generateSiteMap() { $sitemap = new XmlWriter(); $sitemap->openMemory(); $sitemap->startElement('sitemap'); $sitemap->startElement('page'); $sitemap->writeAttribute('href', 'page1.php'); $sitemap->text('Page 1'); $sitemap->endElement(); $sitemap->endElement(); return $sitemap; } function output($content) { $doc = new XmlWriter(); $doc->openMemory(); $doc->writePi('xml-stylesheet', 'type="text/xsl" href="template.xsl"'); $doc->startElement('document'); $doc->writeRaw( generateSiteMap()->outputMemory() ); $doc->writeRaw( $content->outputMemory() ); $doc->endElement(); $doc->endDocument(); $output = xslTransform($doc); return $output; } $content = page1Xml(); echo output($content); Update: I may abandon XmlWriter altogether and use DomDocument instead. It is more flexible and it also seemed to perform better (at least on the crude tests I created).

  Read the article

• IN SQL operator in R-Shiny

  - by Piyush

  I am taking multiple selection for component as per below code. selectInput("cmpnt", "Choose Component:", choices = as.character(levels(Material_Data()$CMPNT_NM)),multiple = TRUE) But I am trying to write a sql statement as given below, then its not working. Neither it is throwing any error message. When I was selecting one option at a time (without mutiple = TRUE) then it was working (since I was using "=" operator). But after using "multiple=TRUE" I need to use IN operator, which is not working. Input_Data2 <- fn$sqldf( paste0( "select * from Input_Data1 where MTRL_NBR = '$mtrl1' and CMPNT_NM in ('$cmpnt1')") ) Thanks in advance for any help on this. Thanks jdharrison! Pleasefind the detailed code: # server.R library(RODBC) library(shiny) library(sqldf) Input_Data <- readRDS("InputSource.rds") Mtrl <- factor(Input_Data$MTRL_NBR) Mtrl_List <- levels(Mtrl) shinyServer(function(input, output) { # First UI input (Service column) filter clientData output$Choose_Material <- renderUI({ if (is.null(clientData())) return("No client selected") selectInput("mtrl", "Choose Material:", choices = as.character(levels(clientData()$MTRL_NBR)), selected = input$mtrl ) }) # Second UI input (Rounds column) filter service-filtered clientData output$Choose_Component <- renderUI({ if(is.null(input$mtrl)) return() if (is.null(Material_Data())) return("No service selected") selectInput("cmpnt", "Choose Component:", choices = as.character(levels(Material_Data()$CMPNT_NM)),multiple = TRUE) }) # First data load (client data) clientData <- reactive({ # get(input$Input_Data) return(Input_Data) }) # Second data load (filter by service column) Material_Data <- reactive({ dat <- clientData() if (is.null(dat)) return(NULL) if (!is.null(input$mtrl)) # ! dat <- dat[dat$MTRL_NBR %in% input$mtrl,] dat <- droplevels(dat) return(dat) }) output$Choose_Columns <- renderUI({ if(is.null(input$mtrl)) return() if(is.null(input$cmpnt)) return() colnames <- names(Input_Data) checkboxGroupInput("columns", "Choose Columns To Display The Data:", choices = colnames, selected = colnames) }) output$text <- renderText({ print(input$cmpnt) }) output$data_table <- renderTable({ if(is.null(input$mtrl)) return() if (is.null(input$columns) || !(input$columns %in% names(Input_Data))) return() Input_Data1 <- Input_Data[, input$columns, drop = FALSE] cmpnt1 <- input$cmpnt mtrl1 <- input$mtrl Input_Data2 <- fn$sqldf( paste0( "select * from Input_Data1 where MTRL_NBR = '$mtrl1' and CMPNT_NM in ('$cmpnt1')") ) head(Input_Data2, 10) }) })

  Read the article

• sed script to remove file name duplicates

  - by dma_k

  Dear community, I hope the below task will be very easy for sed lovers. I am not sed-guru, but I need to express the following task in sed, as sed is more popular on Linux systems. The input text stream is something which is produced by "make depends" and looks like following: pgm2asc.o: pgm2asc.c ../include/config.h amiga.h list.h pgm2asc.h pnm.h \ output.h gocr.h unicode.h ocr1.h ocr0.h otsu.h barcode.h progress.h box.o: box.c gocr.h pnm.h ../include/config.h unicode.h list.h pgm2asc.h \ output.h database.o: database.c gocr.h pnm.h ../include/config.h unicode.h list.h \ pgm2asc.h output.h detect.o: detect.c pgm2asc.h pnm.h ../include/config.h output.h gocr.h \ unicode.h list.h I need to catch only C++ header files (i.e. ending with .h), make the list unique and print as space-separated list prepending src/ as a path-prefix. This is achieved by the following perl script: make libs-depends | perl -e 'while (<>) { while (/ ([\w\.\/]+?\.h)/g) { $a{$1} = 1; } } print join " ", map { "src/$_" } keys %a;' The output is: src/unicode.h src/pnm.h src/progress.h src/amiga.h src/ocr0.h src/ocr1.h src/otsu.h src/barcode.h src/gocr.h src/../include/config.h src/list.h src/pgm2asc.h src/output.h Please, help to express this in sed.

  Read the article

• SCons and dependencies for python function generating source

  - by elmo

  I have an input file data, a python function parse and a template. What I am trying to do is use parse function to get dictionary out of data and use that to replace fields in template. Now to make this a bit more generic (I perform the same action in few places) I have defined a custom function to do so. Below is definition of custom builder and values is a dictionary with { 'name': (data_file, parse_function) } (you don't really need to read through this, I simply put it here for completeness). def TOOL_ADD_FILL_TEMPLATE(env): def FillTemplate(env, output, template, values): out = output[0] subs = {} for name, (node, process) in values.iteritems(): def Process(env, target, source): with open( env.GetBuildPath(target[0]), 'w') as out: out.write( process( source[0] ) ) builder = env.Builder( action = Process ) subs[name] = builder( env, env.GetBuildPath(output[0])+'_'+name+'_processed.cpp', node )[0] def Fill(env, target, source): values = dict( (name, n.get_contents()) for name, n in subs.iteritems() ) contents = template[0].get_contents().format( **values ) open( env.GetBuildPath(target[0]), 'w').write( contents ) builder = env.Builder( action = Fill ) builder( env, output[0], template + subs.values() ) return output env.Append(BUILDERS = {'FillTemplate': FillTemplate}) It works fine when it comes to checking if data or template changed. If it did it rebuilds the output. It even works if I edit process function directly. However if my process function looks like this: def process( node ): return subprocess(node) and I edit subprocess the change goes unnoticed. Is there any way to get correct builds without making process functions being always invoked?

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >