Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 92/407 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• After I backed up my ubuntu 12.04, my system crashed

  - by user95490

  Outline: I use the way shown on http://ubuntuforums.org/showthread.php?t=35087 to backup my linux system, but somehow when I restore it, it crashes. Problem Description: When I reboot, there's an information: Gave up waiting for root device. Common problems: -- Boot args (cat /proc/cmdline) -- Check rootdisplay = (did the system wait long enough?) -- Check root = (did the system wait for the right device?) -- Missing modules (cat /proc/modules; ls dev) ALERT! /dev/disk/by-uuid/9cf6f563-86d1-47be-bc26-92dd7df35cb3 does not exist. Dropping to a shell!

  Read the article

• 3TB non-boot hard disk on older motherboard

  - by Bcos

  It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

  Read the article

• Booting a native Windows install in Virtualbox: is it possible?

  - by Aron Rotteveel

  I am looking for something similiar to Bootcamp. Currently, I run Ubuntu Maveric as my primary operating system and run Windows 7 in Virtualbox. For some tasks, however, running Windows virtualized just seems to result in too much overhead and speed loss, and I'd like to be able to boot natively. The ideal situation would be to setup Windows and Ubuntu in dual boot on seperate partitions, with the ability to boot the Windows partition in Virtualbox on Ubuntu as well. Is this possible? Also, how it is that Bootcamp seems to be the only system capable of this?

  Read the article

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

• Ubuntu 12.04 installation CD is not booting?

  - by vinodk89

  I am using Ubuntu 8.10 and want to upgrade it to 12.04. I have downloaded 12.04 from the Ubuntu site and burned as ISO image CD in a DVD (because it is 701.3MB). When I insert this DVD into my drive for installation, it does not boot. A blank black screen appears. In 8.10 when I click on update to 9.04 it shows some error. Ubuntu 8.10 is not as good as 12.04. Please friends help me to solve this problem. I want to install Ubuntu 12.04 in my pc.

  Read the article

• Ubuntu is not booting - "No init fount. Try passing init= bootarg." , Install from Windows (Wubi)

  - by Hunzai

  Unbuntu 10.04 installed from Windows 7 (Wubi filesystme), Now Ubuntu is not booting giving this error. Target filesystem doesn't have /sbin/init. No init fount. Try passing init= bootarg. BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash) Enter 'help' for a list of build in commands (initramfs) The solutions given by folk is like [http://learntoconfigure.wordpress.com/2012/11/29/ubuntu-cannot-boot-no-init-found-try-passing-initbootarg/] Can't solved my problem because Ubuntu is installed from windows and all the drive shows of windows, Can anyone help me? thanks, Hunzai

  Read the article

• which log file on ubuntu server is responsible for logging why network interface failed to up during

  - by alexm

  Was playing with tftp and screwed up something in boot sequence. Eth2 fails to start at boot but allows to be restarted manually. Can not find error message in logs... so, which log file on ubuntu server would show why network interface (eth2) failed to up during boot process?

  Read the article

• Desktop in Kubuntu lacks bars and quite everything after trying to apply Plymouth fix for proprietary drivers

  - by Michcioperz

  I'm running Kubuntu 13.10, my computer's graphics card is Nvidia GT 520. I tried to fix that Plymouth's problem with proprietary graphics driver using an old script I found on the internet (it was coded for Natty, now that I think about it I shouldn't have done it). I ran that script and rebooted my computer. First incorrect behaviour I noticed was that Plymouth only displayed its text splash only on 1/4th of the screen, though when I pressed Esc key the logs were displaying correctly. Main problem appeared when I logged in. All my desktop's windows lack menu bar, can't be closed with Alt-F4, and they don't appear on the task bar. I tried fixing it by reinstalling GRUB a few times, purging /etc/grub.d and /boot/grub, but only the text splash issue was fixed. How can I fix that?

  Read the article

• Booting drops to EFI shell but boots normally if exit'ed

  - by wittybear

  (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

  Read the article

• Problems increasing root size

  - by user212866

  I'm running out of space, so I tried to increase root size using this link: Increase size of root partition after installing Ubuntu in Windows Here is the output Filesystem Type Size Used Avail Use% Mounted on /dev/sda7 ext4 6,2G 5,6G 308M 95% / udev devtmpfs 965M 4,0K 965M 1% /dev tmpfs tmpfs 389M 892K 388M 1% /run none tmpfs 5,0M 4,0K 5,0M 1% /run/lock none tmpfs 972M 440K 971M 1% /run/shm /dev/sda5 fuseblk 12G 6,1G 5,8G 52% /media/Ubuntu /dev/sda2 fuseblk 278G 260G 19G 94% /media/AC4CC70D4CC6D16E I tried to allocate 16Gb in the host (/dev/sda2 which is windows 7 partition). When I get to the \ubuntu\disks folder, I only get the "new.disk" file which weighs the 16Gb allocated and not the "root.disk" file too. Also, the /dev/sda7 size doesn't increase. Could you please help me? Many thanks

  Read the article

• ubuntu 9.10 on an external usb drive: grub1 does not work

  - by Toc

  I have installed Ubuntu on a partition of my external usb drive. Since I had problems with grub2, I have uninstalled it and installed grub1. But then the usb drive didn't boot anymore, and I am forced to the limited shell of grub1. If I write manually kernel (hd0,4)/vmlinuz-2.6.31-15-generic root=/dev/sdb4 ro quiet splash initrd (hd0,4)/boot/initrd.img-2.6.31-15-generic boot then Ubuntu is loaded, but if I execute the commands root (hd0,4) setup (hd0) as explained at http://www.gnu.org/software/grub/manual/html_node/Installing-GRUB-natively.html#Installing-GRUB-natively, next time I boot from usb I am forced again to the grub limited shell. How can I restore a working grub?

  Read the article

• Lenovo Ideapad p500 having Windows 8 booting issues. Boot repair pastebin included!

  - by piratetone

  I recently installed Ubuntu 13.10, and thought I properly set things up to dual boot into Windows 8, but I continually get .efi errors when I attempt to boot into Windows 8. I installed Boot-Repair and used that to run the recommended fixes. It provided additional boot options within the GRUB2, but none (other than Ubuntu) are working. Here's the file I pulled from Boot Repair that shows no errors! http://paste.ubuntu.com/6321946/ I do appreciate any help - thank you!

  Read the article

• Cause of laptop only booting once every 3-10 times

  - by user16441

  My 3-year old Asus EEE laptop has been working flawlessly in the past, but in the last week it has started behaving oddly. When I boot, one of the following happens: Screen remains totally black. Absolutely nothing comes up. I need to retry booting. (Happens 70% of the time). Laptop starts regular boot. However, somewhere during the boot process it goes black and I need to retry (20% of the time). Screen turning black is more likely when I move the laptop around during boot. Laptop boots properly. Once booted, all is fine. But I'm afraid to turn it off and have been keeping the laptop running till the night. Additional details: All normal lights light up when I boot; whichever of the scenarios goes down. There are no odd sounds or beeps, whichever of the scenarios goes down. I thought it might be the SSD drive that is dying, but it does not use SMART and it appears difficult to troubleshoot. I tried booting with and without the battery, but the scenarios are identical. Before completely investigating the hard drive, I'd like to hear opinions regarding the cause of this problem. Is this most likely the hard drive, or could there be another cause for these symptoms? Using Arch Linux.

  Read the article

• Installing 12.04 alongside windows 7

  - by user1425394

  Trying to install Ubuntu 12.04 alongside windows 7 home. However when I get the installation option it says that there are already multiple os installed and it dosn't give *me the option to install Ubuntu alongside windows.* The problem is that I have no other OS installed. No my question hasnt been answered at Installing Ubuntu with Windows, which is left and right when allocating space? 5 answers My question has nothing to do with which is left and right when allocating space? Please read question before posting an unrelated answer

  Read the article

• resizing partitions

  - by venetin

  I have the following configuration: sda1 1 GB maybe fat32 (windows recovery partition) sda2 40 GB ntfs(windows drive c) with boot flag sda3 around 100GB ntfs(storage partition) sda4 extended partition:sda5 10 GB ext4 partition sda6 1 GB linux swap I want to make this changes: sda2 30 GB resize(decrease size with 10 GB) sda3 around 100GB(move and maybe decrease size with 4-5 GB) sda4 around 20-22 GB (move and increase size with 10-15GB) sda5 around 20 GB (move and increase size with 10-12 GB) sda6 2 GB (move and increase size with 1 GB) Is it safe to do this operations?Will i lose grub? I will do the changes with gparted on puppy linux live usb. Thanks

  Read the article

• No partitions in Ubuntu isntallation

  - by user204212

  Today, with the new version of Ubuntu, I have decided to install it in my laptot, but running with Windows 8, which is the OS I have installed now and that I don't want to uninstall, because I need some programs. I have downloaded it and burned into a CD. Everything in the "installation" goes right untill I have to choose where to install it. It doesn't recognise my Windows 8 and, moreover, it sees my disk as it was all empty space (500Gb). I can't install it and I don't know what to do, so let's see if you can help, because you know a lot more than me in this topic :) Thanks!

  Read the article

• How to mount NTFS drive at startup

  - by user3403

  I'm not even sure if this is the right question, but basically I have a partition with Windows 7 on it (named Acer in my Ubuntu places menu) that I have to click on every time I start the computer in order for my music to come up in Rhythmbox, since my music is stored on the windows drive. What I want to do is have the NTFS drive "Acer" mount automatically when I start the computer, so my music is there automatically.

  Read the article

• installing linux on an crippled machine

  - by networkbooter

  I have a somehwat ancient toshiba laptop (which cant boot from a usb) that i want to install linux on (ubuntu i guess). currently running windows XP and ubuntu (via wubi). I want to delete these OSs and replace with ubuntu only. it does have a network boot option - i was wondering if the easiet way is to steup some sort of network boot server on my other computer (which has ubunutu) and get the machine to boot from it so i can install linux? i cant seem to find instructions on the 'net as to how i would go about doing this... any pointers would be most appreciated. thanks!

  Read the article

• installing linux on an crippled machine

  - by networkbooter

  I have a somehwat ancient toshiba laptop (which cant boot from a usb) that i want to install linux on (ubuntu i guess). currently running windows XP and ubuntu (via wubi). I want to delete these OSs and replace with ubuntu only. it does have a network boot option - i was wondering if the easiet way is to steup some sort of network boot server on my other computer (which has ubunutu) and get the machine to boot from it so i can install linux? i cant seem to find instructions on the 'net as to how i would go about doing this... any pointers would be most appreciated. thanks!

  Read the article

• Ubuntu can't shut down correctly [closed]

  - by Luc1Hz

  Possible Duplicate: Problem with ubuntu 12.04 I am new to Ubuntu. I've installed 12.04 version of Ubuntu. It works fine but sometimes when i shutdown my PC from Ubuntu and when I try to start it again,nothing shows on the screen. It's always black screen instead of Acer logo (I have Acer aspire 5573) and the system restart again and again but and doesn't allow me to choose a OS (Ubuntu/windows,i use dualboot) To fix this I have to remove the battery and put it again.Then everything works fine. How do i fix this issue? I think that could be a incompatibility with the PC because everything works fine with windows. Thanks!

  Read the article

• Weird graphical bug when installing on an Asus G51jx

  - by skeletons

  Each and every time I attempt to install ubuntu 11.04 or 11.10 I get this bug after the very first ubuntu loadscreen pops up from the boot cd. I have been able to successfully load 10.04 and 10.10 on it but it refuses to load 11.10. Even attempting to update from 10.10 to 11.04 caused this very same issue. I am running on an Asus G51jx. Please help I have been trying to get this working for two weeks now. I do like 10.10 but I would rather have 11.10 :(

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

  Read the article

• JavaScript: Alternative to JQuery's (dual) Slider control?

  - by GregJohn

  I am using the JQuery Slider control for use as a double sided slider (dual slider). It's a great UI control but I'm looking for an alternative that isn't so "fat". Right now, just for me to use the Slider control, I have to include: JQuery core JQuery UI core JQuery Slider plugin When I both minimize using Google's awesome Closure (minimizer) and GZIP the JavaScript, I'm still at around 29kb. Question: Do any comparable (dual) Slider control exist that isn't such a large download?

  Read the article

• Read-only filesystem Recovery Mode not working

  - by purbleguy

  I have seen other posts of this before, but they didn't help. In short, today I was trying to play Colobot on my Ubuntu Trusty computer, when I tried to access the directory the game was in by terminal, bash warned me that the disk was in a read-only state. I'm like, ok... So I reboot and go into recovery mode, there I do fsck, it finds errors, but apparently fails to fix them. At that point I was getting annoyed and searched the internet, once I found an answer I ran the grub and dpkg options in recovery mode, recovery mode said it was read/write, but when I boot in, I get the same thing, read-only. So I reboot into recovery mode, and tada! It's read-only again. I can't think of anything else to do, as the other people who had the same problems had them fixed by the steps I did. I got all my important files backed up to both a seperate partition and a seperate computer, so no worries there. I just need help getting this to work, as my computer might as well be a brick if I cant do f/a on it

  Read the article

• Failed to get i915 symbols, graphics turbo disabled

  - by Optimus Prime

  I'm getting "Failed to get i915 symbols, graphics turbo disabled" error message after installing following softwares and few updates from Ubuntu. Django, Mysql server 5.5 Mysql benchmark And i have installed few updates for ubuntu. It was showing as Security Updates for Ubuntu. After installing Updates the update manager showed that i should restart the system. On restart i got following error message. " failed to get i915 symbols, graphics turbo disabled". So i tried the work around mentioned here (using the Live CD) ie add intel_ips to the blacklist echo "blacklist intel_ips" /etc/modprobe.d/blacklist.conf add i915 and intel_ips to /etc/modules echo -e "i915/nintel_ips" /etc/modules Now when start the system it freezes at Ubuntu splash screen. I'm using Ubuntu 12.04 LTS, on Dell inspiron N1040. I need to boot the system as i have spend lot of days configuring. Python and Django. Please help EDIT : OK when i restarted the system yesterday it magically turned on. Now i can view my desktop. But one problem, i can't mount any of the drives. It says failed to mount Drive. I'm also frequently getting "Ubuntu System Failure" Error Message.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >