Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 96/407 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• How is the 137GB limit counted in Virtual PC (two systems on one disk)?

  - by Nux

  I have a dual boot (Win7, XP) physical machine on my old computer which I want to virtualize and move to my new one. So I've uninstalled everything that I can and run shrink from RescueCD (used GParted). Now I have two about 80GiB partitions with a gap between them, so still this seem to be above the given limit. Still the resulting VHD (made with Disk2vhd) is much below the limit (about 110GiB) and both partitions are below the limit. So my question is - is it failing due to the limitations of disk size for VPC or is failing simply because it's a dual boot system. Or maybe it would work if I would move partitions to be close to each other (the gap between them is about 171GB and the whole physical disk is 1TB)?

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

• Can't boot from CD

  - by Jason Swett

  I installed Ubuntu on a PowerBook G4 and it only works about 10% of the time. For this reason I decided to re-install OS X, but my machine won't boot from CD. It also won't boot Ubuntu the vast majority of the time, so I'm kind of screwed. After a ton of tries, I finally got my machine to boot a Linux command line. Is there anything I can do at this point to make my machine more runnable, just for the sake of installing OS X?

  Read the article

• Can't boot from CD

  - by Jason Swett

  I installed Ubuntu on a PowerBook G4 and it only works about 10% of the time. For this reason I decided to re-install OS X, but my machine won't boot from CD. It also won't boot Ubuntu the vast majority of the time, so I'm kind of screwed. After a ton of tries, I finally got my machine to boot a Linux command line. Is there anything I can do at this point to make my machine more runnable, just for the sake of installing OS X?

  Read the article

• Windows 7 Boot Loader - Remove 30 second waiting time

  - by derekhh

  I've installed Fedora 17 and Windows 7 on two different hard disks as a dual-boot system. The default boot loader is GRUB 2 maintained and configured in Fedora 17. When I startup and choose "Windows 7 bootloader (on /dev/sda1)" in GRUB 2, Windows 7 boot loader will appear, with only Windows 7 as the only choice and also the default operating system, with a 30 second waiting time if no input is detected. I'm trying to see if it is possible to remove this 30-second waiting time. I've tried to follow the instructions on the Web by configuring default operating system in the control panel but seems there is something wrong with it. I've also tried to use "bcdedit enum /all" but still receives error prompts. Update: Added my boot tab screen in msconfig.

  Read the article

• different amazon image with/without ebs boot?

  - by user41999

  i'm at http://alestic.com/ and can see Ubuntu 10.04 Lucid Canonical, ubuntu@ Ubuntu 10.04 Lucid Canonical, ubuntu@EBS boot 1.what is the different between with/without EBS boot? any article explaining this? 2. can provide advantage/disadvantages of using not using ebs boot?

  Read the article

• A problem in my windows boot menu

  - by user210332

  Hi, One i had kept a supervisor password to my windows boot screen, but now i forgot that password, Now i am unable to access the boot menu since its asking the password, all menu options are disabled. Is it possible to remove that password and can i get the boot menu default settings back? Processor: Intel Pentium dual core (2) OS : XP Thanks in Advance,

  Read the article

• windows server 2012 wont boot after instlling on iscsi device

  - by Nandan

  Windows server 2012 installed on a ISCI LUN. Problem noticed after first reboot. Windows boots only if setup DVD is present(i have to ignore "press any key to boot from DVD" prompt). to present the login Screen and everything looks great from here. But the server wont boot without the help of setup DVD. Can any one help me understand what would be the problem? Dell Workstation T3600 Intel Pro NIC (Capable of ISCI Boot and also enabled)

  Read the article

• not able to open files in windows partition from linux on a dual boot system

  - by user1237244

  I have installed dual boot on my laptop, windows XP && Fedora linux. For some unknown reason windows XP is not booting up. Through fedora I'm able to see the windows XP partition and files in it. But the problem here is, I'm not able to open those files from linux. Does anybody hit this kind of issue, if so and incase you figured out the soluton, can you please share the solution? Thanks in advance.

  Read the article

• Turning a (dual boot) Ubuntu 9 into a virtual machine

  - by xain

  I have a dual boot box (Ubuntu 9 and Vista) and I'm about to upgrade Vista to Win 7. Being Ubuntu my main development environment, I'd like to use it as it is from the new environment via VirtualBox or VMWare. I know tools like clonezilla that backup entire drives; in my case, the linux partitions are distributed between several disks which in turn contain both linux and windows data. My intention is to use some backup tool (like Clonezilla if it fits) that allows me to ONLY backup the linux partitions distributed in several disks. Any hints ? Thanks in advance.

  Read the article

• Ram not working in dual dynamic paging mode

  - by Robin Agrahari

  My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

  Read the article

• Replacing GRUB2 with Windows boot loader

  - by KovBal

  I'm trying to replace GRUB2 with Windows' standard boot loader (bootmgr?), but I can't get it to work. My Windows 7 install is in a single NTFS partition, which is marked as active (boot flag is set). First, I tried the automatic repair with the install disk, but it didn't detect any problems. Then I ran bootrec /fixmbr and bootrec /fixboot, but all I got was a black screen at boot with a blinking cursor. After that I created a boot partition for GRUB2, I figured, at least I can use it to chainload, but it give me a "disk reading error". If I used GRUB's ntldr loader, than I got error 0xc0000225 (some sort of BCD error). I tried to rebuild the BCD from the rescue environment, and it was successful, but the error didn't go away. Update: I've tried to rebuild the BCD, but nothing changed...

  Read the article

• Problem in the Windows boot screen

  - by Velmrugan

  Hi, Once i had kept a supervisor password to my windows boot screen, but now i forgot that password, Now i am unable to access the boot menu since its asking the password, all menu options are disabled. Is it possible to remove that password and can i get the boot menu default settings back? I had tried to change the jumper settings too, but the problem hasn't been solved. Processor: Intel Pentium dual core (2) OS : XP Thanks in Advance,

  Read the article

• Can't boot into my Windows 7 64-bit Acer laptop

  - by John Smith

  Boot normally -- it hangs on "Starting Windows" animation forever. Boot safe mode -- it bluescreens. Boot with a recovery CD (or try Repair Installation directly without a CD) -- it hangs on the green loading bar forever. I dual-boot Ubuntu and can get into the Ubuntu partition fine so I don't think anything is necessarily wrong with the harddrive, but the Ubuntu partition is tiny and I rarely use it and can't access my Windows files anyway. Is there anything I can try that'll help repair whatever happened? I just want to run a checkdisk utility or something similar that'll repair whatever got botched. My laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834215206

  Read the article

• Windows 7 Keeps Changing the MBR on boot (grub2)

  - by Rodrigo

  I installed Ubuntu in my new notebook. It originally comes with Windows 7 installed on it. Everything works nice however every time i boot into Windows7 the grub menu doesn't work any more. i can't boot into windows or ubuntu any more. How do I stop this? Its rather annoying to have to boot, chroot and fix this problem everytime.

  Read the article

• Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

  - by Thunder

  I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

  Read the article

• How do I add a boot from cd option to yaboot?

  - by Sergiu

  So I'm dual-booting Ubuntu 12.04.1 on my iMac G5 powepc alongside Mac OS X and I want to add a boot cd option to yaboot because I'm trying to boot a scratched Mac OS X installation DVD that takes a while to read and the frst bootstrap moves on too fast. How do I edit the timeout for the first bootstrap anyways? So, my main question is, how do I add a cd booting option to yaboot and then, how doI boot it? The devalias from OpenFrmware tells me that 1 have 2 cd-rom instaled, on is /ht/pci@3/ata-6/disk@0 and the other on ends with a 1 instead of a zero. These are the contents of my yaboot.conf file: yaboot.conf generated by the Ubuntu installer run: "man yaboot.conf" for details. Do not make changes until you have!! see also: /usr/share/doc/yaboot/examples for example configurations. For a dual-boot menu, add one or more of: bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ boot="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part2" device=/ht@0,f2000000/pci@3/k2-sata-root@c/@0/@0 partition=4 root="UUID=798a048f-ee48-49e0-bba3-111aed8dee04" timeout=12000 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot enablecdboot macosx="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part3" image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="quiet splash" What do I add here so that yaboot will boot from my cd in like 3 minutes after startup? Thanks!

  Read the article

• Can't boot into ubuntu, black screen after grub menu

  - by wim

  Ubuntu is not booting properly for me anymore. The grub menu comes up, and whether I choose a linux recovery mode or the normal one I get a black screen after a few seconds. There is a brief message about vga=791 being deprecated, but I am not able to read it fully because the black screen covers it up almost immediately. I have googled for hours for solutions, and most people seem able to solve similar problems by editing in grub and adding nomodeset into the line starting with linux /boot... but this solution is not working for me, I still don't get any GUI. Sometimes I am able to get the dmesg rolling past, I think it was when I removed quiet splash from that line, but still no GUI - the computer seems to be on and working because it responds to a ctrl-alt-del and reboots. I have tried with 3 different graphics cards (2 nVidia and 1 ATI) and swapping them doesn't seem to change the behaviour at all. What else can I try?

  Read the article

• Cannot boot from USB disk with "not a COM32R image" error

  - by Siva Prasad Varma

  After installing 11.10 on my Dell Studo 15 (Model 1557) laptop, it started to overheat. Recently it even shutdown twice saying that critical temperature has reached even when I was just idling (not even a single program was open except for Firefox). After learning that it is a problem with 3.0.0 kernel I decided to roll back to 10.04 LTS. I have downloaded the most recent 10.04 iso from ubuntu.com and created a live USB using startup disk creator in 11.10. But when I am trying to boot from USB I am getting the following error vesamenu.c32: not a COM32R image I have installed ubuntu from usb stick a couple of dozen times before this and I think it is not a problem with my hardware. Please tell me what to do.

  Read the article

• Can't boot Ubuntu after install Ubuntu

  - by Ramprasad

  I have downloaded Ubuntu 12.04.1 LTS 32 bit, burnt it on DVD and tried to install on my PC. My PC running in Windows 7 Ultimate 32 bit mounted on C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through CD, It boots and Ubuntu install window opens. Ask "Try Ubuntu" and "Install Ubuntu". I go on "Install Ubuntu". Then I go on install Ubuntu with Windows (First Option) - install. It shows some blank screen with some lines, and shows "Please Remove installation media and close tray and press enter". Then PC restarts and Run Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am a Android Developer. So I need to install Ubuntu for my Android Development purpose.

  Read the article

• Convert from EFI to BIOS boot

  - by Lukas F.

  I have a Samsung Notebook NP900X4C with an LUKS encrypted installation of Linux Mint 15 on it. The system is booting in UEFI mode. The problem is that the samsung-notebook kernel module is disabled in UEFI mode and due to that I am missing features like the keyboard backlight. Is it possible to modify the current installtion so it can boot in BIOS mode? Is this correct that the basic steps would be converting the disk from GPT to MBR and installing grub from a live CD? Would this be possible with a LUKS partition?

  Read the article

• What does the `dmesg` error: "composite sync not supported" mean?

  - by M. Tibbits

  Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

  Read the article

• Dell N7110 i7 overheats and doesn't boot when anything is plugged into the USB3 port

  - by Kostyantyn

  When i plug in any devices (mouse, keyboard) into usb 3.0 system dell n7110 overheats and fan goes crazy with terrible noise. So i'm using 1 usb 2.0 slot now with a usb hub. It doesn't solve the problem completely but system stays at a low fan rate for a longer time. I've tried to lower CPU frequency, but in my case (DELL INSPIRON N7110 i7 on Linux 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux) CPU was pretty cool (51 C) and still the same horrible fan noise. Looks like there is no such problems with ubuntu 10.04 (but there're some other problems). Ubuntu even doesn't boot if anything is plugged into usb 3.0

  Read the article

• How To Boot 10 Different Live CDs From 1 USB Flash Drive

  - by YatriTrivedi

  Ever get the urge to try out a bunch of Linux distros at once? Maybe you’re hosting a Linux installation party. Here’s an easy way to get a bunch of Live CDs working from a single thumb drive Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

  Read the article

• Initramfs error during boot

  - by PoohJuice

  Boot from (hd0,0) ext3 238ac8ca-9576-443d-8e23-8dd836cd2683 Starting up ... mount: mounting /dev/disk/by-uuid/238ac8ca-9576-443d-8e23-8dd836cd2683 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built in shell (ash) Enter 'help' for a list of built-in commands.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >