Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 287/402 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294 | Next Page >

does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

- by locuse

i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

Read the article
Screen is black at login screen if display driver is enabled

- by Amir Rachum

I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

Read the article
Is it possible to modify a color scheme and windows decorations in Xfce4?

- by Juhele

just testing PCLinuxOS Phoenix XFCE Edition 2011-07 which I would like to install on my grandpa's PC instead older PCLOS 2009 with KDE3 (which is almost impossible to upgrade). The PC is relatively older one (Sempron 2200+ CPU, MSI K7N2GM2 board with integrated GeForce 440MX series graphics, 1GB RAM and 80GB IDE HDD) and I thought that it is too weak for KDE4. I already used Xfce in the past (Sam Linux 2006 and 2007), but in new Xfce4 I am not able to somehow change the windows color scheme and the windows decorations - the settings manager offers me switching between preinstalled themes but it is possible to modify them with some GUI?

Read the article
Colored blocks on boot

- by stackzerad

When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

Read the article
New entries on the GRUB

- by Kiewic

Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

Read the article
Sharing VPN from XP to Linux virtual

- by user55513

Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

Read the article
DLINK Dir-655 Sharing and connecting wirelessly

- by CYREX

I have a D-LINK DIR-655 and i wish to do the following: My PC is connected to the internet via eth0 (Wired) and it has a wireless card. I wish to connect to the DIR-655 Router and share my connection via the router but wirelessly. I do not want to connect via a cabled wired to the router. I want to connect to the router via wifi. After that i want to make the Router share the wireless connection am giving it to other PCs wirelessly. So the sharing and connecting in all PCs will be done via WiFi.

Read the article
Thermal risks to other components when watercooling CPU

- by B Sharp

I recently ordered all the components for a new desktop system to replace my old, dying computer. I wanted to have a really quiet desktop, so I got a case rated for being quiet and opted to try a closed-system CPU water cooling kit (Antec Kuhler H2O 620) that was on sale for a very good price over the Thanksgiving weekend. Most of my components are still in transit, but I became somewhat worried when a friend mentioned that abandoning air cooling units can result in heat buildup inside the case due to heat generated by the video card and other components such as RAM, the northbridge, MOSFETs and voltage regulators radiating heat that the CPU fan would normally at least keep circulating around so it doesn't build up in localized areas. Is this a realistic problem? What other precautions should I take to remove heat from other components? Adding more case fans seems like it would get really noisy. Are there quiet alternatives?

Read the article
Is it my motherboard?

- by jarodrussell

Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

Read the article
Serious voltage and temperature problems

- by James Willson

My computer has been acting up when I play games so I wanted to look into why. Issue 1: GPU Temp According to afterburner and speedfan my 8800GTX idles at 90 degrees and then when playing games shoots up to over 110C which is when my graphics basically starts to give rendering issues. Issue 2: CPU Temp Speedfan is saying my CPU temp is 83C idle but when I look at core temp it says core0 is at 35C and core1 is at 33C. Issue 3: Voltages This is what speedfan is saying for my voltages: Vcore1: 1.01V Vcore2: 1.90V +3.3V: 3.31V +5V: 4.95V +12V: 0.51V -12V: -16.80V -5V: -8.43V +5V 5.13V Vbat: 3.25V Vcore: 3.00V +3.3V: 3.20V These voltages, for lack of a better word, look f*cked. With all this happening, the computer runs ok under normal use. Is the software giving out incorrect readouts or instead should I immediately move the computer into another room before it explodes? P.s I would like to add this is a stock system. EVGA 8800GTX, E6850 CPU, 800W PSU

Read the article
System freezes for 5 seconds when seeking in or skipping to songs and videos

- by pragmatick

When I start playing a new video or MP3 or skip to a time when playing them, my system hangs for a couple of seconds. A restart solves this problem, but only for a while. It does not matter which player I use (VLC, Media Player, Winamp, Zoom Player), which media files or if they are located on a network drive or on the local hard drive. Everything else works flawlessly and after the playing has started, there are not problems - until I switch to another file. Additionally, when the Winamp playlist continues to the next song, the system does not hang. When I skip to the next song manually, the system hangs. I've been using Windows XP for years and consider myself a fairly professional windows user, but I have no idea what could cause this. Dual-core 2Ghz, 2GB RAM, Windows XP SP3, Audigy card with kxproject. Worked flawlessly for years. Would be glad if anyone could help.

Read the article
what Windowx XP LAN driver for Asus F5Z

- by Radek

a friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed succcessfully all drivers from assus driver download site. Everything is working fine but ethernet driver. The installation of Lan Driver for WIN XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

Read the article
Configuring NVIDIA Quadro with Dell Precision M4600

- by vsecades

After a frustrating couple of weeks when I recently bought my Dell Precision laptop, I managed to fix an issue where Ubuntu (yes, was NOT using Windows, get serious) would not recognize the video card and would cause all sorts of problems all over the place. I ended up one Saturday morning nearly throwing this thing away, when I managed to find a post about NVIDIA Optimus technology... ( http://www.pcmag.com/article2/0,2817,2358963,00.asp ). Now I am a huge advocate of disruptive new stuff, as long as we keep the broader audience in mind. Anyhow, disabling this (which as the BIOS settings state only work on Windows 7 or later), effectively allow the NVIDIA based Ubuntu driver to kick in full force. No need for a trash can anymore thankfully. As I saw multiple posts all over the place about this, check your BIOS, disable and try the video again to see if this corrects your issues. Best of luck!

Read the article
How to increase Remote Desktop resolution?

- by BugAlert

I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

Read the article
No Internet access while being connected to VPN using Cisco VPN Client 5.

- by szeldon

Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

Read the article
Missing Right Click Menu Text After Sleep

- by petebob796

I have a laptop running Windows 7 and regularly close the lid to put it in sleep mode. Recently after resuming from sleep if I go to access the right click menu in the windows shell when I hover over the menu items the text disappears and doesn't re-appear without closing the menu and right clicking again. The only way to fix this is to restart. Any ideas what could be causing this? I have an nvidia 8600m gs graphics card which had a BSOD problem a while back at boot up but since I underclocked it slightly it has been running fine and I experience no other issues but this. This only affects right click menus that are part of the windows so not any programs right click menu. It's not a major problem just strange and a little annoying.

Read the article
Ubuntu 10.04 not detecting multiple monitors

- by razass

I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

Read the article
HP Z210 SFF: two different video cards produce no Displayport output when installed

- by ConcernedOfTunbridgeWells

I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

Read the article
Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

- by Fulvio

On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

Read the article
How does an OS communicate with other hardware components?

- by Jack

How can a program running on a CPU (mostly OS) access other PC hardware? Such as Graphic card, HDD and so? From what I read, in DOS, this was done using BIOS calls, specifically the INT instruction. But, the INT instruction should only jump to the certain space in RAM. So how can some program stored in RAM access other computer hardware, when the CPU can only access RAM, and receive interrupts? Does Windows use INT instructions as well, or is there a new way to communicate with the hardware?

Read the article
Why do some PDFs lag in Adobe Acrobat?

- by Coldblackice

I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

Read the article
Power Supply Not Working?

- by Mr.Glass

So I recently made some purchases for a new computer including: Motherboard: Gigabyte GA-EP45-UD3R CPU : Intel Core2Quad 2.66Ghz Power Supply: Antec Basiq 500w UPDATE: I got the Power Supply working, the motherboard's lights come on, the video card fan spins, BUT the CPU fan does NOT spin and there is no video. Whats the possibility of lacking power? In the mobo guide it says the use of a power supply providing a 2x4 12V connector is recommended (I do not have this connector) by the CPU manufacturer when using an Intel Extreme Edition (I'm using Core2Quad) UPDATE: Got it working, intstalling windows 7 now. THANKS GUYS!!

Read the article
Removing (Presumably) Extraneous Network Adapters from Device Manager (eg WAN Miniport)

- by Synetech inc.

Can anyone shed some light on the default items in the Network Adapters branch of the Windows Device Manager? In addition to the network card, there are always a bunch of other things that I cannot find any useful information on such as RAS Asynch Adapter and all the WAN Miniports (IKEv2, IP(v6), L2TP, Network Monitor, PPPOE, PPTP, SSTP). I would like to trim it down and uninstall whatever possible but cannot find out exactly what these items are responsible for (and therefore whether or not they are needed on my system). Most of the pages found with Google are either people trying to fix an error with such an item or someone asking what it is and being given an unhelpful, pat response like “just leave them alone” or “they’re necessary”. I highly doubt that is the case and I’m certain that at least some items can be removed because even if they become necessary in the future they can be added again (for example installing Network Monitor or Protowall reinstalls the miniport drivers anyway).

Read the article
win7: app crashing/hanging on "save as"-dialog

- by Fuxi

hi all, now this is really annoying - i'm having a global problem in win7: when using the system's "save as"-filedialog, the main app will just hang. the mouse-cursor is showing progress, the whole app is hanging and i need to terminate it manually. it's happening with every app! (notepad, word, graphics app). i'm assuming it's something with the system enumerating the harddisk-drivenames or something. any idea how to fix this? btw - when viewing the problem details - it's telling the module - it's msonsext.dll looks like some office thing to me. thanks

Read the article
What disk setup is needed / best practice for hypervisor-only servers?

- by Luke404

Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294 | Next Page >