Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 290/402 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• How does one go about fixing a pixelation issue?

  - by Tyler

  I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

  Read the article

• View scheduled recordings remotely

  - by Scott

  I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Please help to troubleshoot the issue with Inspiron 8600 laptop

  - by user34300

  Hello! I have a Dell Inspiron 8600 laptop which display stopped working all of the sudden. It started to show a purple fog pattern along with some color vertical lines. I talked to Dell support and they told me that is a screen gone bad and I should get a new one which I did. But surprisingly the new display won't work either! The pattern on the screen is different but still no picture. So I tried to connect the old display to another laptop (Lenovo Z61) and it turns out it works just fine with it! So please help me to identify the cause of the issue. I think it could be a video card but the external display works flawlessly. I appreciate your thoughts about it so I won't need to buy spares which I don't need. Thank you! P.S. Please do not suggest to contact Dell support again.

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

  - by Tom

  I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

  Read the article

• How do I connect to my home's primary wired network through an extra (wireless) router?

  - by Matthew Patrick Cashatt

  Thanks for looking! I have set up a desktop PC in my workshop. The Cat 5 cable connects from this PC to a wireless router which is connected to my home network. The Internet connection is working just fine. However, the "wired" network this is on shows up as a different wired network than the one that the PCs inside my house are connected to. This is a problem because I would like to connect this workshop PC to various shared resources like printers, HD Homerun (cable tv card), shared drives, etc. When I go to "Network and Sharing" and attempt to find the network that the PCs inside my home are connected to, I don't see it. Any help is appreciated. Thanks!

  Read the article

• Frame rate upsampling codec/player/software?

  - by djechelon

  Hello, I recently noticed that when I play both HD and SD videos on my HDMI TV at 1080p 60Hz from my computer, the motion is not fluid as I would expect. As far as I know, it could be because the 24fps video needs to be upsampled by the codec to match the 60Hz output of the monitor. But, as far as I know, the upsampling is done by simply repeating each photogram for a certain amount of frames. I usually play MKV videos with VLC. Do you know if there is a player or codec that performs the upsampling by interpolation like some 100Hz TVs do? I recently saw an LG led TV play a 24fps 720p video at 100Hz with an incredible motion fluidity, and I simply wonder why can't my computer do! I have an NVidia card. Does PureVideo help? I'm a noob with these things. Thank you.

  Read the article

• Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - Asus M3A78-EM

  - by kamleshrao

  AMD PC Motherboard - Asus M3A78-EM (installed VGA drivers from Asus website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

  Read the article

• Why would the servers network type change from Private to Public?

  - by Phil Hannent

  Just found a fault with a server, other users have had problems connecting to it. The setting on the network card had changed from Private (domain) network to Public (the other option being Home). The switch to the network interface would have caused the firewall to block a lot of normal functions. I am guessing that since the event log showed no reason for the change that it might be due to a complete shutdown we had recently where someone powered up the machines, however the domain controllers might not have been booted up first. Any confirmation that this might be the case?

  Read the article

• Windows 8 gives "system thread exception not handled" after update

  - by Shobhit

  I have a 64-bit dell laptop which I recently upgraded from Windows 7 to Windows 8. Since then, it's creating a havoc in my life. The metro apps are not working; the system crashes once in a while and none of my games are running because I don't have the correct drivers for my graphics card (ATI 5000 series). Some days back, Windows downloaded an update and prompted me to restart. After that day, whenever I log in and fire up my desktop, I get all kinds of blue screen errors. The most common one looks something like this: - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Please help me with how I can fix this, optionally how to go back to windows 7. Thanks.

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Options for transparent data encryption on SQL 2005 and 2008 DBs.

  - by Dan

  Recently, in Massachusetts a law was passed (rather silently) that data containing personally identifiable information, must be encrypted. PII is defined by the state, as containing the residents first and last name, in combination with either, A. SSN B. drivers license or ID card # C. Debit or CC # Due to the nature of the software we make, all of our clients use SQL as the backend. Typically servers will be running SQl2005 Standard or above, sometimes SQL 2008. Almost all client machines use SQL2005 Express. We use replication between client and server. Unfortunately, to get TDE you need to have SQL Enterprise on each machine, which is absolutely not an option. I'm looking for recommendations of products that will encrypt a DB. Right now, I'm not interested in whole disk encryption at all.

  Read the article

• Black screen during startup

  - by Juanillo

  Hello, I've got a friend with a weird problem. When he starts his computer the screen is completely black untile the computer is completely started. So the screen is black until it suddenly shows the windows desktop. He said that this is happening since a technical service repaired his computer, but that repairment is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to Bios or to secure start-up (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it musn't be configured in this way in the Bios.) Maybe there´s a problem with the hardware (maybe the graphic card). Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it? Thanks.

  Read the article

• Windows 7 RC sleep on Thinkpad R51?

  - by Ragesh

  I have an old Thinkpad R51 and Windows 7 just doesn't give me a Sleep option. I suspect it's because it's running the default VGA driver. The machine has an Intel 855 GME graphics adapter but there doesn't seem to be a WDDM driver available publicly. Lenovo's driver download page just says that drivers for Vista are bundled with the OS. Apparently, they aren't bundled with Windows 7 as it always defaults to a generic VGA driver. Is there a reliable way to get Sleep to work on this machine?

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• Linux: Automatically switch to external monitor (VGA)

  - by peoro

  I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find. If it matters my system is like this: Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2 Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules) When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr. Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?

  Read the article

• Can I use only a HDMI monitor?

  - by Felix

  I recently found out there are such things as PC monitors with TV capabilities (or TVs that can be PC monitors), and the idea kind of tickles my fancy. I'm thinking of getting one of these gadgets, and if I do, I will connect it to my PC via HDMI (my graphics card has builtin HDMI), so that I also get sound to the TV. The reason for this is because I have a 2.1 sound system which I want to use both on the PC and the TV. Basically, I want the configuration to look like this: Cable --------> TV --> 2.1 Sound System PC --HDMI--> TV --> 2.1 Sound System My question is: can I use a setup like this? Can I not have a classic VGA monitor? Will I be able to see non-graphical interfaces (such as the BIOS, GRUB, a Linux terminal, ...) through HDMI on the TV? I use Windows 7 and Ubuntu.

  Read the article

• xen hotplug can't add vif to eth0: operation not supported

  - by John Tate

  I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

  Read the article

• Monitor "forgot" its native resolution overnight

  - by Ben

  I have: Hanns G HW173A monitor NVIDIA GTX 460 graphics card Windows XP SP3. It was working. Suddenly overnight I can no longer use my monitor's native resolution of 1440x900. It's not listed, and if I force it it only shows part of the screen. The only resolution that seems to fit the whole screen is now 1024x768. I have tried reinstalling the NVIDIA drivers as well as disabling and enabling the monitor drivers (for windows XP the monitor uses the microsoft "default monitor" drivers - this is what Hanns G says on their website too). Any ideas? Thanks very much.

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >