Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 289/402 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

  • PC won't post after replacing mobo

    - by Dan
    I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

    Read the article

  • FreeBSD after motherboard replacement; should I have any concerns?

    - by cc
    So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

    Read the article

  • Storing Cards and PCI Compliance

    - by Nimbuz
    I'm developing a SaaS service and will be managing payments as a merchant for customers, and since we'll be using multipe payment processors depending on users location, amount and other factors so its important to store card details. I did some research and from what I understood all you need is a PCI compliant host (VPS, Dedicated or Private Cloud) and get it validated and certified through some provider like TrustWave etc... Is that correct or am I missing something? Also, would be great if you could suggest a few (not necessasrily cheap, but affordable) PCI compliant hosts. Many thanks

    Read the article

  • Server 2008 R2 repair install

    - by Kyle
    Is it possible to do a repair install on a server 2008 R2 Enterprise machine like we used to be able to do on 2003? I need to reinstall on a remote server and don't have a driver cd in the drive just a copy of server. I am worried that when it comes back up I won't have any drivers for the NIC. I have a iDRAC but can't seem to send files over the DRAC to the machine. Sadly this server doesn't have an SD card in the DRAC with the files I need. I welcome any suggestions if the repair is not possible. Our IDC is in Chicago and they are buried under snow so I won't be able to get another admin on site until at least tomorrow.

    Read the article

  • Where to find Linux drivers for my notebook

    - by smwikipedia
    Perhaps it is not proper to post on this forum. Sorry for any inconvenience. I have finally make up my mind to use Linux (Ubuntu 10.04) as the SOLE operating system on my notebook. The last obstacle is that where to find proper drivers for my devices? Such as: ATI Xpress 200M Video Adapter Texas Instrument SD Card Reader And many more... Could someone give me some advices on where to find these drivers? Many thanks.

    Read the article

  • Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

    - by Kris
    I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

    Read the article

  • The cache is getting at full level so fast

    - by CompilingCyborg
    Please, the memory and the cache are getting to the full level quite quickly under my linux mint 9 - isadora system. I used Ubuntu and Debian before, and it was not causing this issue at all. At the current time i typing the following command frequently to empty the cache "echo 3 /proc/sys/vm/drop_caches". Please any way around this? or do you know what's going wrong? | I am only programming on this machine; no graphics, no games nothing. Thanks in advance for your help!

    Read the article

  • Cloning a linux system from sdx to cciss

    - by churnd
    I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

    Read the article

  • Remote desktop connection drops before login can appear

    - by Keatly
    Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

    Read the article

  • Bios wont post unless I restart power supply.

    - by remy
    I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

    Read the article

  • Flow of packets in network

    - by user58859
    I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

    Read the article

  • Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

    - by cragno
    I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

    Read the article

  • Changing Internet connection on ISA Server 2000

    - by garyb32234234
    Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

    Read the article

  • blue screen of death - softwares for find and fix on damaged drive with another operating system

    - by SilverLight
    last night i got a virus in my windows 7. after reset my computer i got blue screen of death like below : my windows 7 minidump for finding the problem i have another operating system in my computer (windows xp). is there a software for find and fix the problem in windows 7 drive? how can i see event logs of windows 7 with windows xp? edit : Last known good gonfiguration or safe mode in boot menu did n't help and still have the problem. i have nvidia graphic card on my system.but how can i fix it's driver from windows xp and i don't know it's in relationship with that bsod or not?

    Read the article

  • Google Chrome gets really slow on 10+ open tabs

    - by Anton
    For some time already I face a problem with Google Chrome. I really love this browser, but on Windows 7 on a pretty decent machine (i5, 4GB RAM) it gets REALLY slow when I open for instance 10 techcrunch.com pages. Once I do that it becomes virtually difficult to scroll through pages and the general responsiveness of the browser gets down. And if I open 20+ or 30+ tabs there is a good chance all of them will crash. Does anyone got an idea? This happens to me on several PCs with Windows 7 64bit. At 10 tabs there is 600-700MB memory used by Chrome. Two systems have the issue are both laptops with integrated graphics. One by Intel, the other an nVidia GeForce 310M.

    Read the article

  • dell studio 1558 multi touchpad multi finger problem

    - by christian130
    Recently I bought an Intel Core i7 Dell laptop fully integrated. I have an ATi Radeon 1 gb ram graphic card and so on. Everything works fine even the brightness, but when I try the multi touch multi finger(touchpad which enables two or more finger) the pointer jump and go there and go here and so It's very annoying because when I'm trying to write this question I cannot let the pointer be cool! when I accidentally the touchpad it is very annoying. How can I fix this ?

    Read the article

  • How to disable 3G USB Modem internal storage from being loaded by linux kernel?

    - by Krystian
    Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

    Read the article

  • Enterprise laptop doesn't recognize WiFi

    - by Michiel
    My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

    Read the article

  • What kind of SSL certificate do I need?

    - by Christoffer
    Hi, I want to install HTTPS on my server and I wonder what kind of certificate I will need and where I can buy it. The site is a web application that demands high security by it's users since they store sensitive business data. I am also integrating a third party payment gateway into the register process of the site and need a secure way to send credit card data one way. I do not intend to store this data in our own database. So, what do I need? And also, how do I install it on Ubuntu Server 9.10 / Apache2 ? Cheers! Christoffer

    Read the article

  • Camtasia on remote computer?

    - by daughtkom
    I have a need to use one laptop for a live presentation (with projector, etc.), but record that presentation on another laptop -- similar to what I can do with Camtasia, only with the recording happening on another laptop. Is this possible? What do I need to do this? Some VGA device that goes between the presenting machine and the projector? Some USB device? My ideal requirements: The machines must be "standard" laptops (so I can't just add a new card to a desktop, etc.). I prefer a hardware solution, but cannot involve studio type equipment. I'd prefer not to install Camtasia (or similar) on the presenting machine for two reasons: licensing issues performance issues (sometimes the presentations are machine intensive and I don't want the recording software to interfere with the presentation) I'd appreciate any tips. Thanks.

    Read the article

  • Rollback driver in Windows via command line

    - by ultrasawblade
    I have a remote system in which I've updated the Nvidia graphics driver, but now RDPDD.dll, which I'm guessing stands for RDP Display Driver, will not load (found this out via Event Viewer). I can use Sysinternal's Psexec to execute commands though. I'm sure something has gone very wrong and the user of this system (a CAD engineer) won't be able to use his system normally. I've tried two remote reboots and that has not resolved the issue. So I would like to use the "Roll Back" option for the Nvidia driver in the device manager. Is there a command-line way of doing this?

    Read the article

  • Windows XP Blue-Screens And Reboots Instantly On Boot-Up

    - by ashes999
    My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

    Read the article

  • Motherboard memory question

    - by JERiv
    I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

    Read the article

  • Can't change picture import settings in Windows 7

    - by Joel in Gö
    I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

    Read the article

  • How to make condition inside getView of Custom BaseAdapter

    - by user1501150
    I want to make a Custom ListView with Custom BaseAdapter, where the the status=1,I want to show a CheckBox, and else I want to show a textView.. My given condition is: if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } But Some times I obtain some row that has neither checkBox nor TextView. The Code of my Custom BaseAdapter is given below . private class MyCustomAdapter extends BaseAdapter { private static final int TYPE_ITEM = 0; private static final int TYPE_ITEM_WITH_HEADER = 1; // private static final int TYPE_MAX_COUNT = TYPE_SEPARATOR + 1; private ArrayList<WatchListAllEntity> mData = new ArrayList(); private LayoutInflater mInflater; private ArrayList<WatchListAllEntity> items = new ArrayList<WatchListAllEntity>(); public MyCustomAdapter(Context context, ArrayList<WatchListAllEntity> items) { mInflater = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); } public void addItem(WatchListAllEntity watchListAllEntity) { // TODO Auto-generated method stub items.add(watchListAllEntity); } public View getView(int position, View convertView, ViewGroup parent) { View v = convertView; final int position1 = position; if (v == null) { LayoutInflater vi = (LayoutInflater) getSystemService(Context.LAYOUT_INFLATER_SERVICE); v = vi.inflate(R.layout.listitempict, null); } watchListAllEntity = new WatchListAllEntity(); watchListAllEntity = items.get(position); Log.i("position: iteamsLength ", position + ", " + items.size()); if (watchListAllEntity != null) { ImageView itemImage = (ImageView) v .findViewById(R.id.imageviewproduct); if (watchListAllEntity.get_thumbnail_image_url1() != null) { Drawable image = ImageOperations(watchListAllEntity .get_thumbnail_image_url1().replace(" ", "%20"), "image.jpg"); // itemImage.setImageResource(R.drawable.icon); if (image != null) { itemImage.setImageDrawable(image); itemImage.setAdjustViewBounds(true); } else { itemImage.setImageResource(R.drawable.iconnamecard); } Log.i("status_ja , status", watchListAllEntity.get_status_ja() + " ," + watchListAllEntity.getStatus()); int NewtheStatus = Integer.parseInt(watchListAllEntity .getStatus()); CheckBox checkBox = (CheckBox) v .findViewById(R.id.checkboxproduct); TextView alreadyOrderText = (TextView) v .findViewById(R.id.alreadyordertext); if (NewtheStatus == 1) { alreadyOrderText .setVisibility(TextView.GONE); } else{ checkBox.setVisibility(CheckBox.GONE); } Log.i("Loading ProccardId: ", watchListAllEntity.get_proc_card_id() + ""); checkBox.setOnCheckedChangeListener(new OnCheckedChangeListener() { public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) { WatchListAllEntity watchListAllEntity2 = items .get(position1); Log.i("Position: ", position1 + ""); // TODO Auto-generated method stub if (isChecked) { Constants.orderList.add(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Add: ", watchListAllEntity2 .get_proc_card_id() + ""); } else { Constants.orderList.remove(watchListAllEntity2 .get_proc_card_id()); Log.i("Proc Card Id Remove: ", watchListAllEntity2.get_proc_card_id() + ""); } } }); } } return v; } private Drawable ImageOperations(String url, String saveFilename) { try { InputStream is = (InputStream) this.fetch(url); Drawable d = Drawable.createFromStream(is, "src"); return d; } catch (MalformedURLException e) { return null; } catch (IOException e) { return null; } } public Object fetch(String address) throws MalformedURLException, IOException { URL url = new URL(address); Object content = url.getContent(); return content; } public int getCount() { // TODO Auto-generated method stub int sizef=items.size(); Log.i("Size", sizef+""); return items.size(); } public Object getItem(int position) { // TODO Auto-generated method stub return items.get(position); } public long getItemId(int position) { // TODO Auto-generated method stub return position; } }

    Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >