Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 388/1359 | < Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >

• Screen corruption with 946G / 82945G/GZ [closed]

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• sudo: source: command not found

  - by HorusKol

  I've been updating some of the default profile for bash, and saw from the tutorials I was following that I could reload the new profile with the new environment settings by using: source /etc/bash.bashrc The only thing is - the new environment variables were only available to my current user - and were ignored when I used sudo. They only became available to sudo when I closed my terminal session and rejoined. When I try to use: sudo source /etc/bash.bashrc I get the error: sudo: source: command not found Is there a simple way to load in the new bash profile settings for sudo without having to close the terminal and restart?

  Read the article

• Clementine current song as empathy status

  - by pahnin

  Any plugin available to set Clementine's current playing song as empathy status [update] I've tried it and was not succesful, here is my problem http://stackoverflow.com/questions/7671763/error-setting-status-to-empathy-with-dbus/7760194#7760194 but I've figured out that it is not possible to set status of empathy through dbus http://telepathy.freedesktop.org/spec/Connection_Interface_Simple_Presence.html#Method:SetPresence regards [update]

  Read the article

• Audio Stutter in in ubuntu 12.04

  - by Andrew Redd

  After upgrading to precise my audio is stuttering. It is happening, in VLC, mplayer, and anything streaming from the internet. I followed the procedures in https://help.ubuntu.com/community/SoundTroubleshootingProcedure but nothing has helped so far. There is the problem that the driver version is out of date but it does not seem to want to update with the given commands. $ bash alsa-info.sh --stdout |grep version Driver version: 1.0.24 Library version: 1.0.25 Utilities version: 1.0.25 How can I upgrade the driver and fix the stuttering?

  Read the article

• How do I get back hard drive space after I have uninstalled Ubuntu from Windows?

  - by Shantanu

  I installed Ubuntu on windows like it says to do it on Ubuntu's website as an application. I did not want it to create a separate partition on my hard drive. A few days ago, I uninstalled Ubuntu by going into the Windows control panel and hitting uninstall. As you would expect, I would get back my 100 or so gb on the disc. i never really installed anything of importance on ubuntu so i never had a second thought about uninstalling it. But I never got back my 100gb from Ubuntu. Now when I add up all of the folders on my c drive, they total to the amount I had on windows before I uninstalled Ubuntu but when I look at the My Computer screen, it says that another 100 or so gb is missing. I tried defragmenting the disc, downloading various disc managers but nothing fixed the space problem. Can anyone please help me with this!!??? Any help is much appreciated! Just making sure: UBUNTU WAS NOT ON A SEPARATE PARTITION, IT WAS INSTALLED AS AN APPLICATION ON WINDOWS. It tells yuo how to do this here except i did it with a much older version (i think it was 8.04 or soemthing): http://www.ubuntu.com/download/help/install-ubuntu-with-windows

  Read the article

• 13.10 qtcreateor 271 wont work

  - by bernd feinman

  Just installed ubuntu 13.10 x86 with all updates. I then installed qt4 libraries and qt creator 271: sudo apt-get install build-essentials sudo apt-get install libqt4-dev sudi apt-get install qtcreator Both installed successfully, and i can launch qt creator, but then i get a black window when i switch to "examples" or "development": http://i.imgur.com/koi6S9S.png The windows cannot be closed. I am guessing because qtcreator somehow cannot find the qt version i installed. This is the settings page: http://i.imgur.com/OgAKH7S.png what to do?

  Read the article

• Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

  - by beckett

  I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

  Read the article

• Mouse Not Working on Boot

  - by user88043

  I have seen several topics regarding this situation, but none of them truly address my issue (that, or there are no answers that solve the issue.) Upon booting into Ubuntu 12.04.1 x64 my mouse wired USB mouse (Steelseries Sensei if that makes any difference) either doesn't work or stops working immediately after the grub menu, prior to the login screen appearing. The cursor is present, but obviously not reactive to any mouse movement; even the LED on my mouse turns off (or fails to turn on.) The only way I've found to activate the mouse is to restart the computer, and even then it's 50/50 at best as to whether or not the mouse will be powered. This issue has never happened in Windows 7, so the mouse is operating properly on the hardware and connection side. Forgive my ignorance of Ubuntu (and Linux in general), but I was hopeful that someone would have some suggestions, or could at least instruct me on what to check in order to provide any further information for diagnoses.

  Read the article

• nVidia GeForce Go 7600? can it ever run unity?

  - by Khaled Musleh

  my laptop Toshiba Qosmio G30 has nVidia GeForce Go 7600 card and it suppose to support 3D . i run unity 2d now . I run 12.04 and the graphic driver is--VESA: G73 Board - toshg73m-- by UBUNTU. when i run /usr/lib/nux/unity_support_test -p then i get this list Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no the card is not blacklisted but a similar one with GT is! Do you think that there is a chance the laptop can run the unity 3d? and may be i could change the resolution of the screen to a higher one too! I tried all the nvidia drivers provided but none works (except 96 in ubuntu 12.04 ). i get a black screen or terminal screen. best wishes to all

  Read the article

• How to associate all file types within Wine with its corresponding native application?

  - by MestreLion

  This is easily done for a single file type, as answered in How to associate a file type within Wine with a native application?, by creating a .reg for the desired filetype. But this is for AVI only. I use some wine apps (uTorrent, Soulseek, Eudora, to name a few) that can launch a wide range of files. Email attachments, for example, can be JPG, DOC, PDF, PPS... its impossible (and not desirable) to track down all possible file types that one may receive in an email or download in a torrent. So I neeed a solution to be more generic and broad. I need the file association to honor whatever native app is currently configured. And I want this to be done for all file types configured in my system. I've already figured out how to make the solution generic. Simply replacing the launched app in .reg for winebrowser, like this: [HKEY_CLASSES_ROOT\.pdf] @="PDFfile" "Content Type"="application/pdf" [HKEY_CLASSES_ROOT\PDFfile\Shell\Open\command] @="C:\\windows\\system32\\winebrowser.exe \"%1\"" Ive tested this and it works correctly. Since winebrowser uses xdg-open as a backend, and converts my windows path to a Unix one, the correct (Linux) app is launched. So I need a "batch" updater to wine's registry, sort of a wine-update-associations script that I can run whenever a new app is installed. Maybe a tool that can: List all Mime Types types in my system that have a default, installed app associated Extract all the needed info (glob, mime type, etc) Generate the .REG file in the above format The tricky part is: i've searched a LOT to find info about how association is done in Ubuntu 10.10 onwards, and documentation is scarce and confusing, to say the least. Freedesktop.org has no complete spec, and even Gnome docs are obsolete. So far I've gathered 4 files that contain association info, but im clueless on which (or why) to use, or how to use them to generate the .reg file: ~/.local/share/applications/mimeapps.list ~/.local/share/applications/miminfo.cache /usr/share/applications/miminfo.cache /etc/gnome/defaults.list Any help, script or explanation would be greatly appreciated! Thanks!

  Read the article

• Is it possible to get a Proxy Authentication Dialog with Ubuntu Server?

  - by Johnny Bigoode

  I've got a VM Virtual Box with Ubuntu Server. I'set the http_proxy variable using export http_proxy="http://1234:linux@proxy:8080" The problem is that Ubuntu will constantly try to connect to the internet, even when I'm not logged in my company's account, so everyday I need to reset my password since Ubuntu will constantly try to access the internet. Also, it's always a problem when I need to authenticate the proxy with a different user/password. Can't I just set it to make a small prompt when it tries to connect to the proxy and fails? Like Firefox, Chrome and every app I have installed with Windows 7? I get this small dialog box that asks for a username and password when it can't access the internet. The Ubuntu Server doesn't need constant internet connection, specially since it's only online for tests over LAN.

  Read the article

• Lag when recording with xvidcap?

  - by quangtruong1985

  I used Xvidcap to record my desktop, but the quality of video was too bad (it lagged so much). I also tried with all output formats that xvidcap support, increase the frame-per-second as much as possible and the quality always at 100% but nothing changed. Click to see my video on Youtube Im using 11.04 (unity) with compiz enabled. My card is ATI/AMD Mobility 5450 and all drivers were installed and activated. Please help me! Regards.

  Read the article

• How to connect to a wireless network that has a two word name with a space?

  - by grinan

  Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

  Read the article

• Howto overlay subtitles onto video using avconv?

  - by hatterman

  I am using the following script to overlay a dvdsub stream and a video stream; avconv -i input.mkv -i subtitles.sub -filter_complex "[0:v:0][1:s:0]overlay[vid]" -map "[vid]" -s hd720 -sws_flags lanczos -vcodec libx264 -crf 20 -preset medium ~/Desktop/test.mkv I get the following error ; Stream specifier ':s:0' in filtergraph description [0:v:0][1:s:0]overlay[vid] matches no streams. No matter what I do I just cannot get this to work. Can any one tell me how to 'burn-in' subtitles using avconv (or ffmpeg) ?

  Read the article

• Can't connect to or see my wifi ssid

  - by ant

  Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

  Read the article

• How do i completely remove phpmyadmin?

  - by blade19899

  I messed up my phpmyadmin, I haven't logged in, in phpmyadmin, in a while, and as a result i forgot my password, so i purged it like so: sudo apt-get purge phpmyadmin. I did get some error messages asking for my password but i forgot that, so i just pressed ignore, after that i installed phpmyadmin again like so: sudo apt-get install phpmyadmin. This time i wont be forgetting my password. But now, when i logging my phpmyadmin I get a 404 not found error page!? Question: How do i completely remove phpmyadmin and as a result get phpmyadmin working again Note: I am running Ubuntu 12.10(AMD64)

  Read the article

• How to build the mainline kernel source package?

  - by Maxime R.

  Ubuntu kernel PPA only provides linux-headers*.deb and linux-image*.deb packages. How can I build the corresponding linux-source*.deb package ? Context: I'm currently running Ubuntu 11.10 with the mainline kernel (3.2 rc6 now) to get a better support for my sandybridge IGP (Dell E6420 laptop with intel i5-2520M CPU). Appears, i'd like to install this touchpad driver, ALPS touchpads being badly supported (see previous link bug report), while waiting for upstream support in kernel version 3.3. Problem is, DKMS keeps complaining about not finding the full kernel source: Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. Appears I may not need the full source but I'd still like to try having it installed to see if it solve my problem. What I tried : Uncompressing the kernel.org source archive in /usr/src/. DKMS still complaining. Manually updating the kernel source package with uupdate and the mainline source package like explained here. Did not succeed. Manually building the linux-source package following @roadmr and @elmicha instructions. I eventually succeeded to build it but DKMS still complained about the missing source. At last I noticed an error I did not catch in the first place while reinstalling the kernel headers. Appears the .deb I got may have been corrupted, downloading it again did the trick :) Alas, while DKMS agreed to compile the module i ran into the following error which appears to have already been reported. This issue isn't yet solved but I won't try to because of the following: in the end I decided to test the precise kernel version 3.2-rc6 through the xorg-edgers ppa which appears to be correctly patched: it works. Nevertheless, it might still be of some interest to know how to build the mainline linux-source package as the Ubuntu Kernel Team doesn't provide it. Not to mention that I learned a lot in the process ^^

  Read the article

• How to make openJDK automatically update-alternatives?

  - by cgc512

  Well, I've made a fresh Ubuntu 11.10 install and I installed openJDK 7. It updated alternatives just after installing, so it was all good. Then, I compiled a source and executed it and it didn't worked, then I noticed that java was using the version 1.6, while the javac was 1.7. I thought I had installed it wrong, so I uninstalled it and installed it again. But now, it does not update alternatives automatically (it does it only for javaws). Is there a way to "restart" it so the apt-get does the update-alternatives by itself like the first time? Is it normal that it uses the java 1.6 instead of the java 1.7 when installing openJDK 7? Thank you very much!

  Read the article

• Does Unity support disabling the global application menu?

  - by Michael E

  I'm fairly excited for Unity, as it looks like a promising new direction for Ubuntu. However, I do have a concern - will it be possible to use Unity without the global menu? I have my window manager set to focus-follows-mouse/sloppy focus, and find the productivity gains to be immense. Sloppy focus is incompatible, however, with global menus, as it is possible for the focus to change while you move from window to menu. Will Unity support an option to use window menus while still using Unity?

  Read the article

• External hard drive not recognized

  - by sr71

  Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command cat/proc/partitions/ I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the dmeg command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run lsusb command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Installing updates from hard drive [closed]

  - by Ajay

  I am using Oneiric Beta 2. Installed it yesterday. Then downloaded 350+ MB of updates and installed it. Then when I tried to auto-mount my drives using Storage manager, I screwed up and the system will boot right up to the Ubuntu Splash screen, then turn off. Anyways planning to reinstall Ubuntu again. But I do not want to have to download the updates again. I have a copy of all the downloaded update files with me. Can anyone tell me how I can install the updates from the hard drive without downloading them again ?? Thanks in advance.....

  Read the article

• Xubuntu, LXDE, USB Booting

  - by Kosciak

  Welcome, My problem appeared today - I was using Xubuntu for a long time, but find out that LXDE should be faster than Xfce, so I installed it. After installing I followed tutorial for removing Xfce, cause disk in my computer is very small and I wanted to release some free space. I used command from this tutorial: How to remove xubuntu-desktop? but instead of remove I entered purge command… and rebooted at the end. And I uninstalled whole my things. The problem is in installing system again - it's old Sony Vaio laptop (PCG-GR250) and I have broken CD-DVD drive. It's possible to boot from USB? I can access recovery mode, will this help me? Please answer fast, because it's my brother computer, and his going to kill me if I won't fix this fast :(

  Read the article

• Incompatible group permissions in Linux - Is it a bug?

  - by Sachin

  I am on Ubuntu 11.04. I am creating another user and placing an existing user in the group of other user, hoping to write in the home directory of other user. # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # exit # whoami sachin # cd /home/foo/ bash: cd: /home/foo/: Permission denied # groups sachin sachin : sachin foo This is totally weird. Though user sachin is in group foo, and group bits for /home/foo/ is set to rwx, sachin can't chdir to /home/foo/. I am not able to understand this. But, if at the exit step, I switch to sachin user from root, this is what happens: # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # su sachin # whoami sachin # cd /home/foo/ # ls examples.desktop Now, whatever is happening here is totally incomprehensible. Does su sachin inherits some permissions from the root user at this step? Any explanations would be much appreciated.

  Read the article

• How can I get nvidia-settings to work?

  - by Palace Chan

  I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

  Read the article

• DPKG errors after upgrade to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, cleaning apt cache, manual install using dpkg, etc, i just cant get them to install. what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) It is also just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy.....

  Read the article

< Previous Page | 384 385 386 387 388 389 390 391 392 393 394 395  | Next Page >