Search Results

Search found 15376 results on 616 pages for 'once'.

Page 400/616 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by BlueBill

  Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

  Read the article

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

  Read the article

• Microsoft Remote Desktop Services - Android

  - by Matt Rogers

  We have recently started testing Remote Desktop Services. We have deployed the environment using the latest server, Windows Server 2012 R2. We have deployed the Web Access Roles, RD Gateway, Connection Broker Virtualization Host and Session Host. We are running both, Virtual machine-based and Session-based deployments. All of these are working as expected internally and externally when using a Windows workstation as the RDS client, however, the Android client is unable to launch applications. Once you install the app from Google Play you are given a screen to add Remote Resources. After entering the appropriate URL, username and password we see the applications that have been published. Unfortunately, when we attempt to launch an app we get the following error: Connection Error Host not found. Please provide the fully-qualified name or the IP address of the host. We have already entered this information otherwise I don't believe we would be able to see the published applications. I think the error is related to the certificate and how it is being used to connect to the applications. Since this is in our lab environment we have not configured a valid external certificate on the servers and the trusted certificate that is installed on the android tablet points to our internal server / domain name. What I would like to know: Has anyone configured RDS Web Access on Server 2012 R2 and attempted to externally connect an Android or iOS device using the Microsoft supported Remote Desktop client. Are others experiencing the same problem we are? Were you able to resolve the issue? Was it related to the external cert / host name?

  Read the article

• VSFTP Users and Directories

  - by Mathew

  I'm stuck. I've been working all day on trying to figure out what I'm doing wrong and I've hit wall after wall. What I'm trying to do: Setup FTP in such a way that certain users have access only to their directory, but higher level users have access to all directories. What I've Googled so far: I started with this, but that didn't do what I needed it to. I then used this, but once I created one user, it wouldn't let me create another one. Finally, I decided to follow this, but it wouldn't let me even create one user. I'm using Ubuntu 10. I can login to ftp as a root user and it takes me to the home directory. If I try to login using the user I created in the tutorial it says: Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.2.2) Command: USER mathew Response: 331 Please specify the password. Command: PASS **** Response: 530 Login incorrect. Error: Critical error Error: Could not connect to server

  Read the article

• what can be causes of http server crash?

  - by mithunmo

  Hello , I am using WAMP server on Windows XP. Apache 2.2.11 MySQL 5.1.36 (INNODB engine) PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios IF I use a Low end PC ( low processor speed and low RAM) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? excessive file reading as in every 10 seconds ? unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

  Read the article

• Tomcat 6 Windows Server 64 Redirect Connector Fails

  - by Rafe

  So is there some problem with running the Tomcat connectors under a 64 bit windows OS? Here's my configuration: Windows Server 2003 64 bit Intel Xeon Tomcat 6.0.26 JVM 1.6.0 (64bit) ISAPI Redirect Connector 1.2.30.0 (64 bit) Calling the IP address of the site with :8080 brings up the tomcat page so I know that's running and the examples all work so its obviously not having a problem with the JVM. Calling the site ip on port 80 however gives me error 324 - looking at the application log on windows shows "Could not load all ISAPI filters for site/service. Therefore startup aborted". The ISAPI filter page under the web site properties shows the status of this filter to be down with a red arrow. The ISAPI filter name is jakarta and there is a corresponding virtual directory set up in the root of the site pointing to the same directory as the filter. The jakarta web service extension is also pointing to the required dll (c:\program files\apache software foundation\jakarta isapi redirector\bin\isapi_redirect.dll). Incidentally, this same problem occurs when trying to use Tomcat 5.5. I've also tried swapping out various redirect versions. It's really odd because I got it to work once with a version of the redirector that came with Plesk but I've since uninstalled everything to do with plesk and even trying to use the plesk-compiled dll doesn't work now. I am pulling my hair out on this, any ideas?

  Read the article

• How to setup DNS server behind a VPN

  - by Brian

  I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: External DNS mail.example.com www.example.com vpn.example.com I want to be able to connect to the vpn using 'vpn.example.com'. Once connected I then want to be able to resolve anything which is '*.vpn.example.com' with the DNS server sitting behind the VPN. I know that OpenVPN can push DNS servers to clients when they connect. I am having trouble though with the DNS config, both internal and external. I've gone through a few tutorials etc. and tried to reason about it myself but I'm not getting anywhere. So my main question would be does the above configuration make sense? If so, any general pointers or examples would be greatly appreciated. Here's what I've tried so far based on this tutorial (I've redacted my domain with example.com). When I try the tests with dig at the end to check the resolution is working it fails. db.vpn.example.com $TTL 15m vpn.example.com. IN SOA ns.vpn.example.com. [email protected]. ( 2009010910 ;serial 900 ;refresh 900 ;retry 900 ;expire 900 ;minimum TTL ) vpn.example.com. IN NS ns.vpn.example.com. ns IN A 192.168.0.2 test IN A 192.168.0.2

  Read the article

• WebDAV through Apache2 permissions/missing files

  - by Strifariz

  I have a WebDAV setup on Apache2 on a server running Debian 5.0 (Lenny), which I am accessing through a mapped network drive under Windows 7. The setup appears to run fine, I receive no permission errors when copying a file to the share the first time, but the file never shows up in the directory (it's invisible, doing a ls -lha on the directory as root on the server also shows no files. When attempting to copy the file once more I am informed that the file already exists though, and I am asked if I wish to overwrite the file, when selecting "Yes" to this, I receive a permission error saying I'm not able to write to the folder. My logs aren't reporting any access violations of any kind, what could be the problem? (See log excerpt below) [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 201 304 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "LOCK /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "LOCK /1.png HTTP/1.1" 200 447 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PROPPATCH /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PROPPATCH /1.png HTTP/1.1" 207 389 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "HEAD /1.png HTTP/1.1" 401 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "HEAD /1.png HTTP/1.1" 200 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PUT /1.png HTTP/1.1" 204 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PROPPATCH /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PROPPATCH /1.png HTTP/1.1" 207 389 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "UNLOCK /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "UNLOCK /1.png HTTP/1.1" 204 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:38 +0100] "PROPFIND / HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:38 +0100] "PROPFIND / HTTP/1.1" 207 1634 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600"

  Read the article

• Is there any way to abstract IP address during ssh?

  - by Vivek V K

  I have a server which is in the middle of a forest. It is connected to the Internet via a microwave link and an ADSL link.Hence it has two different static IP addresses. Now if there is heavy rain, the microwave link breaks and I should use the much slower ADSL link. And I ping the microwave ip time to time to check if it is up again . But at times, I end up using the very slow ADSL link even if the microwave link is back up. Hence I need a way to automate this in the following way. 1.I need to abstract the IP address of the machine with some other name which when I use ssh or sftp, will poll both the IP and connect me to the best one. so for eg: if I say ssh -Y name@server, It should first try to connect to the microwave link if it cant, then connect to ADSL. 2.Suppose the first time I connect, the microwave link is down so it connects to ADSL, I need it to dynamically change to the microwave link once it is working again. Is this even possible?

  Read the article

• Wicked VNC Viewer acting out on Windows desktop and CentOS 6.3 server

  - by Johnny Lee

  What we have here is the only way to open the TightVNC viewer on this Windows XP desktop is to have a TigerVNC viewer open on the CentOS 6.3 server desktop. I know it sounds really weird and we’re looking for hints to make it go away. Any ideas? Here is the recipe: We are using Putty on the Windows desktop as SSH (Secure Shell) and a Terminal Emulator. We open and login to Putty then open a login to TightVNC viewer. After many failed attempts, much Googling, and lots of reading to no avail I decided to open the TigerVNC viewer on the CentOS 6.3 server by way of the GNOME desktop Application menu -- Internet tab. After opening and logging into the TigerVNC viewer on the CentOS 6.3 Server, Voila!! We have a remote desktop opened on the server. But what was an interesting discovery was that the TigerVNC viewer on the server had a request on the desktop that was not on the server desktop. This turned out to be a login request that once the password was entered it opened the TightVNC viewer on the Windows desktop. Weird huh? -Why is that password request showing up on the CentOS 6.3 server in the TigerVNC viewer as oppose to showing up on the Windows desktop when logging in using TightVNC viewer to the server?

  Read the article

• Explorer and open file dialog not responding (Vista)

  - by rohancragg

  Any explorer window opened for the first time on my machine causes the explorer window to display the folders tree and folder path in the address bar immediately but the file/folder list pane is blank and the window displays 'Not Responding' in the title bar, this hangs for up to a minute or more. Any file dialog displays 'Not Responding' in the title bar. The files list is eventually displayed after a few seconds or more. Steps to repro: Close all open instances of explorer Windows Key | Run | [enter a folder path such as 'c:\temp'] Or within any app: use a file open / save dialog Once there is at least one open instance of explorer the performance is still fairly poor but not nearly so bad and file lists are displayed in a timely fashion. What I've tried: Cleaned up registry with CCleaner tool, and uninstalled all other unused software Checked nothing unwanted running at startup with Autoruns Removed any ISO burner/recorder/mount software Still to try Get latest version of everything - especially stuff with shell extension behaviour such as TortoiseSVN Anyone have any other suggestions? Thanks alot. Update I'm wondering if this is related, I'll try the hotfix when I get home and report back: KB972685 - FIX:Explorer.exe hangs when using a shell extension written using MFC Update 2 Before I got a chance to try the hotfix it seems one of the above actions fixed this for me; either the removal of IsoRecorder or TortoiseHg (which I was no longer using anyway). Update 3 A similar issue with Explorer.exe has come back since installing TortoiseHg 1.01 :-(

  Read the article

• Ghost Solution Suite: Booting over PXE to WinPE for re-imaging, then booting to installed OS

  - by uberdanzik

  I have 40 networked computers that need to be re-imaged each night over a network via an automatic and unattended process. This is to reset the computers to a default state, as well as update the computers to the latest software loads. I'm using Symantec Ghost Solution Suite 2.5. My process so far is the following: Client begins in a powered down WakeOnLan accepting state. Ghost Console task uses WakeOnLan and PXE to boot the client into the WinPE environment. The client connects to the ghost console and reimages itself successfully. The client closes WinPE and restarts. PROBLEM: The client boots into the WinPE environment again, instead of the newly installed OS (Win7) I need it to boot into Win7 once so that I can run a few configuration batch files, then shut down into the WakeOnLan state again. Ghost console even reports an error on the process, that it never rebooted into the OS. Right now it seems that there is not an option to stop it from booting into the PXE server's WinPE image after re-imaging. Even if I set up a PXE boot menu with other boot options, its pointless, because it will always boot the default option. I would expect the ghost console task to be able to influence the PXE boot choice somehow. What do they expect us to do, turn the PXE server on and off manually? How can I get the client to boot to the OS after re-imaging? Thank you.

  Read the article

• OCZ Vertex 3 SSD boot failure

  - by Col Zero

  Ok, so I just purchased and received a 120GB OCZ Vertex 3. I had Windows 7 on an .ISO file on my computer. I formatted a USB stick and configured it to be read as a CD so that I could install windows onto my SSD from it. I started my comp, had the boot priority set to my USB, starting installing windows 7 to my SSD. And out of no where (I wasn't watching) my computer restarted and it brought me back to the beginning of the Windows 7 set-up. So I turned my computer off and booted it up from the SSD to see if it had installed onto the SSD. The first 2 attempts I had a disk boot failure. So I plugged my hard drive back in, started my computer, turned it off, plugged the SSD back in (literally) and it booted up fine/ Finalized windows got internet set up, and Windows had updates that required a restart. So I restarted and had another disk boot failure. Now I have a disk boot failure every time I try to start my computer up through my SSD. Extra Info: My SSD has never been able to be detected in my BIOS unless my Hard Drive was unplugged (eve then my BIOS didn't always detect it). MY SSD wasn't detected in my BIOS the first and only time it successfully booted up. My SSD literally boots up successfully randomly (only once unfortunately) and is detected in my BIOS randomly. I've tried switching cords etc and nothing has worked. I just want to get this damn thing running so I can see whats its like. I finally found a way to get the OS on this sucker and now it won't even boot up. Any help appreciated

  Read the article

• Distributed development staff needing a common IP range

  - by bakasan

  I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

  Read the article

• Virutal Machine loses network connectivity on Hyper V Cluster

  - by Chris W

  We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help? Edit: I've checked that each blade is running the latest NIC drivers and all seem to be fine. Something that is confusing me - a failover or restart of the VM resolves the issue. Whilst I need to work out the underlying issue that is causing the NICs to hang I'm also concerned that the VM didn't failover to another node which would have solved the outage for me. Is there a way to configure the cluster so that it can tell that the VM guest has lost connectivity and fail it over? As things stand the cluster is assuming that the VM is running happily as I presume Hyper V says everything is great even though there is a problem.

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Pure-FTPD accounts and permissions for websites

  - by EddyR

  I'm having trouble setting up the appropriate Pure-FTPD accounts and permissions - I have the following sites setup up on my Debian server. /var/www/site1 /var/www/site2 /var/www/wordpress The permissions are 775 for folders and 664 for files. The owner is currently admin:ftpgroup Wordpress also requires special permissions for file uploads in /var/www/wordpress/wp-content/uploads What I need is: a general admin group with access to /var/www a group for each site (site1, site2, wordpress) and a group or user, not www-data (?), with permissions to write files to the wordpress upload folder I ask because restrictions on linux groups (can't have groups in groups) makes it a little bit confusing and also because many of the tutorial sites have conflicting information like, some recommend the use of www-data and some don't. Also, I'm not sure if I understand how Pure-FTP is supposed to work exactly. I create a Pure-FTPD account and assign it a directory (/var/www) and a system user (ftpuser) and group (ftpgroup): Can I assign more than 1 path? For example, if a user requires access to 2 sites. Is it better to assign ftpgroup to all ftp locations and let Pure-FTPD manage account access? Why would anyone have more than 1 ftpuser or ftpgroup? (Doesn't it mean users have access to everyone else's files if they could get there?) Sorry for so many questions at once. I've been reading lots of tutorials but I think they've ended up making me more confused!

  Read the article

• CD and DVD burning very slow with LG DVD Burner

  - by Om Nom Nom

  I have an HP m7560in Desktop which came with an LG DVD burner. As far back as I can remember, it has been having problems in burning discs. It used to take about one and a half hour to burn 4 GB of data on a blank DVD-R. I am using Nero and ImgBurn and I usually select 8x speed for burning. I used to run XP earlier and now I run Windows 7 on it, but I face the problem on both. I have already checked that DMA mode is selected in the IDE controllers' properties. On XP, uninstalling the IDE controllers and DVD drive from the Device Manager, rebooting and letting it install the drivers again fixed the problem for a while, but after a couple reboots, the problem used to come back. On Windows 7, even doing that is not fixing the problem. In fact, in Windows 7, the burning process doesn't even begin. Imgburn gets stuck on the first stage (of writing Lead-In), and it never progresses until I turn off / reset the computer. I checked the disc info after this happened, and the disc still shows empty and ready to be burned on, so it's obvious that it didn't even touch the disc. I have already had the drive replaced once by HP, but it didn't fix the problem. Do you guys have any suggestions? (Note that Windows Updates doesn't give any newer driver for the controllers, or any other components for that matter).

  Read the article

• How to run Android-x86 project's ISO in VirtualBox with ethernet?

  - by Shiki

  I managed to find a way just days ago, but I had to leave my other PC and now I have no clue how to get it working again. Basically you have to get the image, then install it in a VirtualBox guest. Now the problem is ... when you launch your VM, there is no internet connection. No with NAT or Bridged. Tried all the network cards too. Since internet connection is crucial for Android development, I have to get this thing working. (As I said, I managed to fix it once.) I'm using: - The 4.0 RC1 images from Android-x86 - VirtualBox - Eclipse 4.2 Juno with the latest Android ADT - Android SDK v18 - upgraded to 19 via the Package manager. Now I seen a lot of different builds on the net, about different Android builds for VirtualBox. I have checked Buildroid for example, but there is no network connection. I have imported the virtual machine just as the howto said. The extension package is also installed and it's up to date.

  Read the article

• XDEBUG/PHP doesn't dump profile even when set up properly?

  - by John D.

  I installed xdebug from source, but also tried my package manager (separately) and they both are loaded correctly (verified by restarting Apache and seeing the xdebug copyright info in phpinfo()) but they do not dump profiling information. Out of the 40 different attempts of configuration it logged once or twice but I lost what I did, I tried with first only loading the module in php.ini with no settings, but it didn't log to /tmp/. I tried many different settings but my current is now: xdebug.profiler_enable = Off xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/" xdebug.profiler_output_name = "profiler.%t" Of course I call my script through 127.0.0.1/test.php?XDEBUG_PROFILE, which is for enable_trigger. Do you know why it would not dump profiler information? nobody (Arch Linux) can write to /tmp/ as it has before, so I'm sure it is not a permissions error. Apache's error_log does not tell me anything about xdebug either, as it has loaded correctly. It just does not "work"! EDIT: I made a subfolder "xdebug_profiles" in /tmp/ and chown'ed it to nobody, and now it works flawlessly. I'm not sure why it couldn't write before, I guess it's just a caveat with nobody on Arch. I answered my own question , not enough points to answer it or comment, so consider this answered.

  Read the article

• MemCache-repcached compile error

  - by Ramy Allam

  I'm trying to install [memcached-1.2.8-repcached-2.2.1]( http://sourceforge.net/projects/repcached/files/latest/download?source=files) And I have the following error after running the make command: make all-recursive make[1]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' Making all in doc make[2]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1/doc' make[2]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' gcc -DHAVE_CONFIG_H -I. -DNDEBUG -g -O2 -MT memcached-memcached.o -MD -MP -MF .d eps/memcached-memcached.Tpo -c -o memcached-memcached.o test -f 'memcached.c' || echo './'memcached.c memcached.c: In function ‘add_iov’: memcached.c:697: error: ‘IOV_MAX’ undeclared (first use in this function) memcached.c:697: error: (Each undeclared identifier is reported only once memcached.c:697: error: for each function it appears in.) make[2]: * [memcached-memcached.o] Error 1 make[2]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' make[1]: * [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' make: * [all] Error 2 OS : Centos5.7 64bit gcc-4.1.2-51.el5 gcc-c++-4.1.2-51.el5 libgcc-4.1.2-51.el5 Note : Memcached and memcache extension for php are already installed root@server[~]# memcached -h memcached 1.4.5 php ext http://pecl.php.net/get/memcache-2.2.6.tgz

  Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >