Search Results

Search found 15376 results on 616 pages for 'once'.

Page 401/616 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

• Installing CDT on top of JDT: Conflicting Dependency

  - by someguy

  I am trying to install the CDT plugin on top my existing version of Eclipse, which was for Java. The problem is that I got this error message when I tried doing so via "Install New Software...": Cannot complete the install because of a conflicting dependency. Software being installed: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) Software currently installed: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) Only one of the following can be installed at once: International Components for Unicode for Java (ICU4J) 4.2.1.v20100412 (com.ibm.icu 4.2.1.v20100412) com.ibm.icu 3.6.1.v20070906 Cannot satisfy dependency: From: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) To: org.eclipse.epp.package.java.feature.feature.group [1.3.1.20100916-1202] Cannot satisfy dependency: From: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) To: com.ibm.icu [3.4.0,4.0.0) Cannot satisfy dependency: From: EPP Java Package 1.3.1.20100916-1202 (org.eclipse.epp.package.java.feature.feature.group 1.3.1.20100916-1202) To: org.eclipse.rcp.feature.group 3.6.0 Cannot satisfy dependency: From: Eclipse RCP 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS (org.eclipse.rcp.feature.group 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS) To: com.ibm.icu [4.2.1.v20100412] Cannot satisfy dependency: From: Eclipse RCP 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T (org.eclipse.rcp.feature.group 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T) To: com.ibm.icu [4.2.1.v20100412] What can I do to solve this?

  Read the article

• Two hosting providers running simultaneously... possible / not possible? good practice / unnecessary?

  - by user29600

  For the sake of their reputation, I won't mention the names. But I'll just use: Business I worked for previously - ABC Web Dev Hosting company they used - XYZ Hosting I recently found out that XYZ Hosting had some sort of incident where they ended up losing a lot of their client's data - including ABC Web Dev's. ABC Web Dev was able to recover some of their customer's websites, after pulling them from their local development computers and putting them up on another hosting provider. They ended up losing a lot of clients because of it and their reputation ruined. I'm starting my own web dev company and I don't want to run into this same issue. I'm planning on using Rackspace but, although they are a great company, according to wikipedia they still have had downtime in their past. I thought it might be a good idea to try to run two providers at once, to ensure that if anything happened in one the websites would still be live because of the other. I know the websites would have to be pulling from one server at all times, but if there's a way to redirect requests to the second server if the first one is down that would solve my issue. As a note, we will have a staging environment setup locally which will allow for quick recovery if a provider did have any issues, however I'd like to avoid any downtime at all if possible. So my questions are: Has anyone tried running two providers simultaneously? Would this be considered good practice or am I going too far? Is there really any way to run two simultaneously where one server acts as a backup?

  Read the article

• Windows 7 AIK help

  - by microchasm

  I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

  Read the article

• How To Remove Bottleneck with Squid Caching Proxy

  - by Volomike

  I'm more of a LAMP web developer trying to help the sysop. When I joined a project, I inherited some old PHP spaghetti code. Some of that code is that it goes out to a third-party website (let's call it thirdparty.com) and pulls down content with an HTTP-GET request. Unfortunately, the way the code is designed, it needs to do this several times a minute. When we looked at the bottlenecks on the server with 'netstat -a', we saw that connections to thirdparty.com were constantly running when this content would be plenty fine to be gathered once a day. What I need to know is if the Squid Proxy Caching Server is the solution we need? I'm guessing that this might let us have it pretend to be thirdparty.com on the network. If the web server needs to query thirdparty.com, it hits Squid instead. Squid can then determine whether it needs to supply content from cache or if it needs to go to thirdparty.com for fresh content. Is this the solution we need? And second, is this easily configured and only to cache thirdparty.com requests?

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• Ubuntu 12.04 on VMware Player loses network configuration

  - by d4ryl3

  I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

  Read the article

• Computer specs for a large database

  - by SpeksETC

  What sort of computer specs (CPU, RAM, disk speed) should I use for running queries on a database of 200+ million records? The queries are for a research project, so there is only one "user" and only one query will be running at a time. I tried it on my own laptop with SQL Server with an i3 processor, 2GB RAM, 5400 RPM disk and a simple query didn't finish even after 8+ hours. I have an option to connect a SSD via eSata and upgrade to 4GB RAM, but not sure if this will be enough... Thanks! Edit: The database is about 25 GB and the indexes are not setup properly. When I tried to add an index, I let it run for about 8 hours and it still hadn't finished so I gave up. Should I have more patience :)? In general, the queries will run once in a while and its ok even if it takes a couple hours to complete.... Also, the queries will produce probably about 10 million records which I need to process using Stata/Matlab and I'm concerned that my current laptop is not strong enough, but unsure of the bottleneck....

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

• Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

  - by izn

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• Bash Script - Traffic Shaping

  - by Craig-Aaron

  hey all, I was wondering if you could have a look at my script and help me add a few things to it, How do I get it to find how many active ethernet ports I have? and how do I filter more than 1 ethernet port How I get this to do a range of IP address? Once I have a few ethenet ports I need to add traffic control to each one #!/bin/bash # Name of the traffic control command. TC=/sbin/tc # The network interface we're planning on limiting bandwidth. IF=eth0 # Network card interface # Download limit (in mega bits) DNLD=10mbit # DOWNLOAD Limit # Upload limit (in mega bits) UPLD=1mbit # UPLOAD Limit # IP address range of the machine we are controlling IP=192.168.0.1 # Host IP # Filter options for limiting the intended interface. U32="$TC filter add dev $IF protocol ip parent 1:0 prio 1 u32" start() { # Hierarchical Token Bucket (HTB) to shape bandwidth $TC qdisc add dev $IF root handle 1: htb default 30 #Creates the root schedlar $TC class add dev $IF parent 1: classid 1:1 htb rate $DNLD #Creates a child schedlar to shape download $TC class add dev $IF parent 1: classid 1:2 htb rate $UPLD #Creates a child schedlar to shape upload $U32 match ip dst $IP/24 flowid 1:1 #Filter to match the interface, limit download speed $U32 match ip src $IP/24 flowid 1:2 #Filter to match the interface, limit upload speed } stop() { # Stop the bandwidth shaping. $TC qdisc del dev $IF root } restart() { # Self-explanatory. stop sleep 1 start } show() { # Display status of traffic control status. $TC -s qdisc ls dev $IF } case "$1" in start) echo -n "Starting bandwidth shaping: " start echo "done" ;; stop) echo -n "Stopping bandwidth shaping: " stop echo "done" ;; restart) echo -n "Restarting bandwidth shaping: " restart echo "done" ;; show) echo "Bandwidth shaping status for $IF:" show echo "" ;; *) pwd=$(pwd) echo "Usage: tc.bash {start|stop|restart|show}" ;; esac exit 0 thanks

  Read the article

• Why does my computer crash randomly?

  - by Donavon Decker

  The other day I went out to my van to get my Tower and when I opened the trunk it fell out. I brought it into the house and opened it, and everything looked ok. When I started it up, about 1-3 minutes afterwards it would crash. It did this over and over until I reseated the cooler. Everything seemed normal again, until after about 10 minutes of gameplay (any game), it would crash. I reseated my GPU + reinstalled the drivers, however I still get the same error. A while back, I'd check my 'Windows Rating' periodically, and all of them were in the '6.0-6.9' range except for my hard disk usage (always been like that [not relative]). Today I went in and looked, and my Processor and Memory was rated 5.4. I reseated my cpu and my memory, refreshed the windows rating, and then my processor and memory went from 5.4, to 5.1. A few minutes ago I reseated them once again, and now it's back to 5.4. Note: Not sure if this is relevant to the issue, but I updated my bios earlier today I honestly have no idea what the issue is, but I'm getting aggravated at the problem. Here are some images which contain images of my specifications: i1271.photobucket.com/albums/jj623/donxdeck/1_zps09f0607c.jpg i1271.photobucket.com/albums/jj623/donxdeck/4_zps381cd00a.jpg i1271.photobucket.com/albums/jj623/donxdeck/3_zps54bba720.jpg i1271.photobucket.com/albums/jj623/donxdeck/2_zps945d3d72.jpg Thanks for the help

  Read the article

• Hosting a javascript api file for third party sites the way sharethis, uservoice, analytics do it.

  - by Dayson

  I'm preparing to launch a service soon which will provide third party websites a widget. The widget requires my javascript file in the website's code. Exactly the same way services like analytics, uservoice, sharethis, getclicky, etc provide you with a javascript snippet to add to your page. Therefore, my javascript file is going to be hotlinked by tons of websites which possibly receive a lot of requests too. I need advice/opinions on the following aspects: What's the right location for hosting this file? Should I use a sub-domain for it? I was thinking of something like http://api.myservice.com/js/foo.js . Remember, once websites start embedding this file, its location CANNOT change under any circumstances. Right now we can afford just one dedicated server. So I have minified my file, enabled gzip and plan to use some good cache control headers through apache. Also, in the near future when the requests pickup, I will use a http proxy like Varnish. Is this a good plan for the near future? Should I be considering a CDN in the future (since we can't afford it now)? If so how do I make sure we're prepared to migrate to it without breaking services. Pros/Cons of moving just this file to a CDN? Also, since its just one javascript file(50kb), any affordable CDN so we could consider it in the beginning itself? Any other word of advice I could use? Anything I shouldn't overlook at this stage which I would regret later? (both in terms of server + javascript ajax limitations) Thanks in advance.

  Read the article

• Convert HTACCESS mod_rewrite directives to nginx format?

  - by Chris

  I'm brand new to nginx and I am trying to convert the app I wrote over from Apache as I need the ability to serve a lot of clients at once without a lot of overhead! I'm getting the hang of setting up nginx and FastCGI PHP but I can't wrap my head around nginx's rewrite format just yet. I know you have to write some simple script that goes in the server {} block in the nginx config but I'm not yet familiar with the syntax. Could anyone with experience with both Apache and nginx help me convert this to nginx format? Thanks! # ------------------------------------------------------ # # Rewrite from canonical domain (remove www.) # # ------------------------------------------------------ # RewriteCond %{HTTP_HOST} ^www.domain.com RewriteRule (.*) http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # This redirects index.php to / # # ------------------------------------------------------ # RewriteCond %{THE_REQUEST} ^[A-Z]+\ /(index|index\.php)\ HTTP/ RewriteRule ^(index|index\.php)$ http://domain.com/ [R=301,L] # ------------------------------------------------------ # # This rewrites 'directories' to their PHP files, # # fixes trailing-slash issues, and redirects .php # # to 'directory' to avoid duplicate content. # # ------------------------------------------------------ # RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)$ $1.php [L] RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)/$ http://domain.com/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^[A-Z]+\ /[^.]+\.php\ HTTP/ RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^([^.]+)\.php$ http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # If it wasn't redirected previously and is not # # a file on the server, rewrite to image generation # # ------------------------------------------------------ # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_\-@#\ "'\+]+)/?([a-z0-9_\-]+)?(\.png|/)?$ generation/image.php?user=${escapemap:$1}&template=${escapemap:$2} [NC,L]

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• How can I stream audio signals from various devices/computers to my home server?

  - by Breakthrough

  I currently have a headless home server set up (running Ubuntu 12.04 server edition) running a simple Apache HTTP server. The server is near an audio receiver, which controls a set of indoor and outdoor speakers in my home. Recently, my father purchased a Bluetooth adapter, which our various laptops and cellphones can connect to, outputting the music to the speakers. I was hoping to find a solution that worked over Wi-Fi, namely because it won't cost anything (I already have a server with an audio card), and it doesn't depend on Bluetooth. Is there any cross-platform (preferably free and open-source) solution that I can use which will allow me to stream audio to my home server, over my home network, from a wide variety of devices (laptops running Windows/Linux or cellphones running Android/BB/iOS)? I need something that works at least with Windows and Android. Also, just to clairfy, I want something that simply allows devices to connect to my server and output an audio signal without any action on the server end (since it's a server hidden away near my receiver). Any subsequent connection attempt should be dropped, so only one device can be in control of the stereo at once.

  Read the article

• Trouble serving vhosts when trying to set up wildcard subdomains with dnsmasq in local development e

  - by Jeremy Kendall

  I'm trying to get wildcard DNS enabled on my laptop using dnsmasq. I realize that this has been asked and answered more than once on this forum, but I can't get the solution to work for me. Steps taken so far: Installed dnsmasq Set address=/example.dev/127.0.0.1 in dnsmasq.conf Set listen-address=127.0.0.1 in dnsmasq.conf Ensured nameserver 127.0.0.1 is in /etc/resolv.conf Set prepend domain-name-servers 127.0.0.1; in /etc/dhcp3/dhclient.conf Created a vhost for example.dev Restarted apache and dnsmasq Note: example.dev is not set in /etc/hosts My vhost for example.dev <VirtualHost *:80> ServerName example.dev DocumentRoot /home/jkendall/public_html/example/public ServerAlias *.example.dev # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory /home/jkendall/public_html/example/public> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> The setup above will server example.dev locally without any problem. It will also serve test.example.dev, but test.example.dev returns the default apache "It works!" index.html from /var/www rather than my index.php in /home/jkendall/public_html/example/public. The solution in this Server Fault thread suggests that address=/.example.dev/127.0.0.1 would resolve my problem, but when I try to use that solution, restarting dnsmasq results in a failure with the error message dnsmasq: error at line 62 of /etc/dnsmasq.conf For grins, I moved my project over to /var/www/example and modified the vhost appropriately. I got the same result as described above. At this point I'm not sure what other steps I can take to resolve the issue. Thoughts?

  Read the article

• FTP on Linux "Failed to retrieve directory listing" not firewall issue

  - by Jaka Prasnikar

  I've got an VPS in germany running Debian X64. I have very strange issue. I have ISPConfig CP installed using proftpd and I can not connect to FTP by any means. Few hours ago I've had installed DirectAdmin on CentOS same VPS and same issue. Simply when I connect to FTP server I get these: Status: Resolving address of web02.defikon.com Status: Connecting to 130.255.190.71:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 12:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER default1 Response: 331 User default1 OK. Password required Command: PASS ****** Response: 230-User default1 has group access to: client0 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing I even tried telnet localhost 21 and the same happends. Once I issue command "LIST" I get time out. I've tried every thing and I can't get this to work =( Please help ! P.S.: iptables is turned off.

  Read the article

• Dynamically add Server 2008 NLB Nodes

  - by Nick Jacques

  Hi All, I have a small NLB cluster for Terminal Servers. One of the things we're looking at doing for this particular project (this is for a college class) is dynamically creating Terminal Servers. What we've done is create policies for a certain OU, that sets the proper TS Farm properties and installs the Terminal Server role and NLB feature. Now what we'd like to do is create a script to be run on our Domain Controller to add hosts to the preexisting NLB cluster. On our Server 2008 R2 Domain Controller, I was thinking of running the following PowerShell script I've kind of hacked together. Any thoughts on if this will work? Is there any way I can trigger this script to run on the DC once all the scripts to install roles are done on the various Terminal Servers? Thanks very much in advance!! Import-Module NetworkLoadBalancingClusters $TermServs = @() $Interface = "Local Area Connection" $ou = [ADSI]"LDAP://OU=Term Servs,DC=example,DC=com" foreach ($child in $ou.psbase.Children) { if ($child.ObjectCategory -like '*computer*') {$TermServs += $child.Name} } foreach ($TS in $TermServs) { Get-NlbCluster 172.16.0.254 | Add-NlbClusterNode -NewNodeName $TS -NewNodeInterface $Interface }

  Read the article

• Can't connect two PCs to a Network Switch at the same time (Windows 7)

  - by puk

  I have two computers connected to a network switch and every once in a while one of the computers will lose its internet connection. It's almost always the same computer every time. However, if I play around with the control panel, I can switch it, so that now the other computer is not connected. Restarting either of the computers does not help either. In Windows, the worlds-greatest-trouble-shooter tells me that a network cable is unplugged and that I should try plugging it in...Disabling and re-enabling my NIC does not fix this problem, neither does swapping cables around. When rebooting, the BIOS complains about how the Ethernet Cable is not plugged in. If it's in any way important, My set up at the office is like so: Modem - Routher - Network Switch 1 - Network Switch 2. I have tried turning off the energy saving option for my NIC, and I tried manually setting the link-speed to 100Mbps Full Duplex without any luck. Also, I have a Realtek PCIe GBE Family controller on both computers Does anyone have any idea why this is happening every 5-10 days? EDIT: I have also tried using a completely different Network Switch and the problem still persists as before.

  Read the article

• problem booting crusty old windows XP

  - by Carson Myers

  I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

  Read the article

• Sharing large (multi-Gb) files with clients

  - by Tim Long

  I wasn't sure if this was the best place for this question, but I think it is squarely in the realm of the IT admin so that's the reason I put it here. We need to share large files (several Gigabytes) with external clients. We need a simple way of reliably and automatically publishing these files so that clients can then download them. Our organization has Windows desktops and a Windows SBS 2011 server. Sharing from our server is probably suboptimal from the client's perspective, because of the low upstream bandwidth of typical ADSL (around 1 Mbps) - it would take all day (9 hours for a 4Gb file) for the client to download the file. Uploading to a 3rd party sever is good for the client but painful for us, because we then have to deal with a multi-hour upload. Uploading to a third-part server would be less problematic if it could be made reliable and automatic, e.g. something like a Groove/SharePoint Workspace, simply drop the file in and wait for it to synchronize - but Groove has a 2Gb limit which is not big enough. So ideally I'd like a service with the following attributes: Must work for files of at least 5Gb, preferably 10Gb Once the transfer is started, it must be reliable (i.e. not sensitive to disconnections and service outages) and completely automatic Ideally, the sender would get a notification when the transfer completes. Has to work with Windows based systems. Any suggestions?

  Read the article

• Compaq R4000 laptop randomly locking up

  - by Josh

  I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

  Read the article

• route propogation using OSPF in a network

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.The internal routing will be configured with OSPF,MPLS including a default and backup path,RSVP for distributing labels withing the telco,OSPF for distributing routes from the customer edge (CE) routers to the VRF's in the adjacent PE's and finally iBGP for distributing customer routes between VRF's in different PEs. The topology of the network is shown below. The Addressing scheme for the network is as follows. UOW-TAU ******* ge-0/0/0 192.168.3.1 TAU-PE1 ******* ge-0/0/0 10.0.1.0 ge-0/0/1 10.0.2.0 ge-0/0/2 192.168.3.2 TAU-P1 ****** ge-0/0/0 172.16.1.0 ge-0/0/1 172.16.3.1 ge-0/0/2 10.0.2.2 HAM-P1 ****** ge-0/0/0 172.16.3.2 ge-0/0/1 172.16.2.1 ge-0/0/3 10.0.3.2 ACK-P1 ****** ge-0/0/0 172.16.1.2 ge-0/0/2 172.16.2.2 ge-0/0/3 10.0.1.2 HAM-PE1 ******* ge-0/0/0 10.0.3.1 ge-0/0/2 192.168.4.2 UOW-HAM ******* ge-0/0/0 192.168.4.1 I also set up loopback address for each node. I want to setup OSPF so that path to each internal subnet and router loopback address is propogated to all PE and P nodes.I also want to select a single area for PE and P nodes,and on each node I should add each interface that should be propogated. How do I accomplish this.? With my understanding below is the procedure to achieve this.Is the below explanation correct? I set up OSPF on UOW-TAU ge-0/0/0 interface and ge-0/0/1 interface and UOW-HAM ge-0/0/0 interface and ge-0/0/1 interface. let me call this Area 100. Once I have done this I should be able to reach each node from others using ping and traceroute. Any help is highly appreciated.

  Read the article

• how to split a very large database on sql server

  - by ken jackson

  I have a 90 GB SQL Server database that I want to make more manageable. It stores stock data from 50+ different stocks from 2009 and 2010, and each stock is a separate table. Some tables have hundreds of millions of rows, and other have just a few million. What I want to do is somehow split the database, so that I don't have a single database file that is 90 GB. What I want is to be able to somehow magically split all the tables so that I can backup the 2009 data once and not have to keep on including it in the backup every time I backup the entire database, however, I would like the 2009 data to be included whenever I do a query. Is partitioning the database the way to go? Will it do the above for me, or will I need some other solution? I research partitioning, but I wasn't sure if that would solve all my problems. I wasn't able to find anything that would tell me whether or not it would migrate prexisting data, or whether it only worked for newly inserted data. Any help or pointers would be much appreciated. Thanks in advance, Ken

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >