Search Results

Search found 15376 results on 616 pages for 'once'.

Page 402/616 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• How can I do an SELINUX filesystem relabel without rebooting first?

  - by Skaperen

  I can touch the file /.autorelabel and reboot and during the initialization coming back up it will do the SELINUX relabel for me. But I want to do this in a different situation where the system has just been copied to a hard drive image. I can chroot to the originating file tree, or chroot to the just populated device image and run it. I just can't find anything that says what to be run. This image is being made into an AMI on AWS EC2, and contains CentOS 6.3. But the time it takes to relabel is too long (6 minutes or more). I want to move the relabel to the image build where the extra time is not an issue (because it happens once instead of every time an AMI is launched). I can make this relabel be the very last thing just before the filesystem is unmounted for the last time until it becomes an AMI and will launch. I just need to know what to call to do it. I have searched man pages with no luck. I have searched system init scripts but where /.autorelabel is detected, it is unclear what is happening. Documents like http://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-sel-fsrelabel.html only tell how to do things that still really do the work after a reboot. I need to have the work doing BEFORE the "reboot" (unmount, build AMI, and launch ready to go). The big point is ... yes there will be a reboot ... but I want the relabel work to be done before that so it won't be done every time an AMI is launched (because it takes so long).

  Read the article

• how to run multiple shell scripts in parallel

  - by tom smith

  I've got a few test scripts, each of which runs a test php app. Each script runs forever. So, cat.sh, dog.sh, and foo.sh, each run a php script, and each shell script runs the php app in a loop, so it runs forever, sleeping after each run. I'm trying to figure out how to run the scripts in parallel, and at the same time, see the output of the php apps in the stdout/term window. I thought, simply doing something like foo.sh > &2 dog.sh > &2 cat.sh > &2 in a shell script would be sufficient, but it's not working. foo.sh, runs foo.php once, and it runs correctly dog.sh, runs dog.php in a never ending loop. it runs as expected cat.sh, runs cat.php in a never ending loop *** this never runs!!! it appears that the shell script never gets to run cat.sh. if i run cat.sh by itself in a separate window/term, it runs as expected... thoughts/comments

  Read the article

• Flash plugin locks up Firefox, Chrome and Safari behind a corporate proxy, IE6 works fine

  - by Shevek

  At work I am forced by corporate policy to use IE6. Obviously this is not so good so I use FF for most of my browsing. However there is a problem once I have installed the Flash plug-in - FF locks up when trying to load Flash media. Looking at the status bar at the time of the lock up it appears this happens when the browser tries to get cross domain data. The Flash Active X plug-in in IE does not suffer this issue. I have tried it in a brand new profile in FF with Flash as the only plug in and it locks up. We have 2 different proxy servers and both exhibit the same problem. I have also tried Chrome and Safari and both lock up with the plug-in installed. So, has anyone else had this problem and solved it? Or, is there any way to disable cross domain data access in the flash plug-in? Or, is there any way to disable the "This site needs an additional plug-in" ribbon which appears when the plug-in is not installed. Many thanks!

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• GTX 280 purple snow on bootup, card works without drivers

  - by Brokar

  i have owned a ASUS GTX280 for 3 years now. The card has been great all along but i started having problems 10 days ago. I was playing Diablo 3 for 1 week on max settings no problems, then suddenly my display kept getting some weird purple/colours as soon as i booted and logged into windows. Went into safe mode, updated drivers and it kept crashing. Formatted PC, fresh windows install with new WHQL drivers again same problem. Uninstalled nvidia drivers and pc has been running great for 4 days now, ofcourse i cannot run games but everything works on 1680x1050 resolution and i can browse internet,watch movies and use my PC for everything but gaming. As soon as i install nvidia drivers PC won't boot. I only wanna game a few hours a week (very busy program with school this month so it might be a blessing that i cannot game) and i would love it if i could keep the card. I am looking to upgrde later on when i will have time for gaming but i wonder if i could still use the card somehow with different/new drivers (tried older drivers that came with the card on a CD aswell) tldr: PC works fine with no nvidia drivers (apart from gaming ofc). Once i install WHQL drivers or older ones, cannot even log into windows. Fix?

  Read the article

• What characteristic of networking/TCP causes linear relation between TCP activity and latency?

  - by DeLongey

  The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

  Read the article

• Looking for a help desk ticketing system..

  - by Dan

  Hi guys Im looking for a good help desk ticket solution. It must perform the following actions for it to be useful. It needs to have a single point of contact via email..e.g [email protected] If we recieve a telephone(or an email outside of the system) we need to be able to create a ticket as if had been added via the single point of contact, this needs to be done with ease in order to save time. Certain people within our organisation deal with certain customers, so if the email/ custom input support call as mentioned in bullet 2 is picked up as having a relationship with that certain person in our organisation it needs to be sent to them/put in their queue for them to work on. If a person is out of office or sick any tickets sent to them must be forwarded to somebody else or put into a seperate pool of tickets that anybody can access. Perhaps have an agent that sorts through tickets in the pool and assigns them to anybody who is available, preferably the person with fewest tickets in their queue/list. Once a customer emails and the system logs it they immediately get a response with a ticket number and maybe details of who is dealing with the problem. Any correspondance in relation to a particular ticket is automatically grouped into some sort of message, and not made into a load of separate tickets. I.e system scans incoming email subjects for ticket numbers and assosciates it with exisiting tickets if that number exists. Any help is much appreciated Thanks P.S I have taken a look at OTRS but i'm not feeling it so unless someone can convince me I guess i'm after an alternative.

  Read the article

• Need to link WP Blog with Rails App on Heroku

  - by John Glass

  I have a client who wants to migrate his Rails app to Heroku. However the client also has a blog associated with his domain that runs on WordPress. Currently, the WordPress blog is running happily alongside the Rails app, but once we migrate to Heroku, that clearly won't be possible. The url for the app is like http://mydomain.com, and the url for the blog is like http://mydomain/blog. I realize that the best long-term solution is to redo the blog in a Rails format like Toto or Jekyll. But in the short term, what is the best way to continue hosting the WP blog where it is (or somewhere) but use Heroku to run the app? The client doesn't want the blog to be on a subdomain, but to remain at mydomain/blog for SEO reasons and also since there is traffic to the blog. I have two ideas: Use rack_rewrite or refraction (or just a regular old 301 and Apache mod_rewrite) on the old (non-Heroku) server to redirect the main url from the old site to Heroku. In this case, I can just leave the Wordpress blog running happily where it is. I think?? Is there a reason to choose one of those options (rack_rewrite, refraction, or mod_rewrite) over the others if I do it this way? Switch the DNS info to point to the Heroku site, and then use a 301 redirect from the blog to the old site. But then I'll have to get the old (non-Heroku) site on a subdomain and use some kind of rewrite rules anyway so it looks like it isn't a subdomain. Are either of these approaches preferable, or is there another way to do it that's easier that I'm missing?

  Read the article

• Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

  - by calbar

  I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

  Read the article

• Fedora 17 - Dropping into debug shell after attempted partitioning

  - by i.h4d35

  So I tried creating a new partition on Fedora 17 using fdisk as follows: Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (2048-823215039, default 2048): Using default value 2048 Last cylinder or +size or +sizeM or +sizeK (1-9039, default 9039): +15G Once this was done,instead of formatting the partition I created, I ran the partprobe command to write the changes to the partition table. On rebooting the computer, it drops to the debug shell and gives me the error as follows: dracut warning:unable to process initqueue dracut warning:/dev/disk/by-uuid/vg_mymachine does not exist dropping to debug shell dracut:/# While trying to run fsck on the said partition from the debug shell, it says "etc/fstab not found" and inside /etc I see a fstab.empty file. Is it now possible to retrieve what I have from the computer? Any help would be appreciated. Thanks in advance Edit: I've also tried the following steps for additional troubleshooting: I tried to boot using the Fedora disk and tried the rescue mode - says no Linux partition detected. I tried to create an fstab file by combining the entries from blkid and the /etc/mtab file and using the UUIDs from the mtab file - It didn't work. As soon as I rebooted the machine, it promptly dropped me in to the debug shell and the fstab file which i created wansn't there anymore in /etc (part of this solution)

  Read the article

• Custom authentication method for GDM

  - by FMC

  I am trying to find a way of authenticating users on public computers through GDM, but I have a few things to be taken in account. The users do not have a login/password, they only thing they are given is a string. This string is unique and will allow us to identify them. You can see this string as a login without a password. The users must be present in a remote database The users must have the rights to login on the computer they are on at that time. A remote database would check if a booking on the computer had been set for that time by that user. Or if no booking had been made, allow to login. A default user id/home/gid has to be set to the user once logged in I have found ways to deal with most of those requirements, but not altogether. PAM looks nice to set up a custom way of checking if the user booked its computer. NSS MySQL looks nice to set up the environment. Would you know how to set up the environment by myself using a custom PAM module (using pam_python would be preferred)? Or any other method that could help me? Thanks in advance!

  Read the article

• WS2008 NTP - Using time.windows.com,0x9 - Time always skewed forwards

  - by David

  I have a domain controller configured to use time.windows.com (with 0x09 flags set). I've noticed that frequently the systems' clock is fast - it varies from 10 minutes to even 45 minutes. I always have to keep resetting the system date/time back to what it should be. When I run "w32tm /query /source" it tells me it's using time.windows.com, and obviously I trust Microsoft not to serve incorrect times, but why is my server's clock fast? EDIT: There are a few Time-Service events in the System log: Event ID: 142 Message: The time service has stopped advertising as a time source because the local clock is not synchronized. Event ID: 139 Message: The time service has started advertising as a time source. These two messages appear in pairs every hour or so. Event 142 appears 14 to 16 minutes after 139 appears. Going back a few months, these events appear: Event ID: 35 Message: The time service is now synchronizing the system time with the time source time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 37 Message: The time provider NtpClient is currently receiving valid time data from time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123-65.55.21.21:123). Event ID: 47 Message: Time Provider NtpClient: No valid response has been received from manually configured peer time.windows.com,0x9 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. These three events only appear once in the log, back in October.

  Read the article

• Random Hard Freeze of Windows 7 (is Kaspersky to be blamed for this?)

  - by Christian Ivicevic

  The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

  Read the article

• Magento Apache Config & Memory Issues

  - by cheshirepine

  I have a Magento installation on a VPS that is giving me a headache. This particular VPS has a reasonable spec - 2gb Memory and 50gb storage. It runs a single domain, with a single Magento install - and nothing else. About 5 months ago we started having issues. Every so often (about once every 2 or 3 weeks) the VPS would crash - all processes stopped and the only way to restart the container is via Virtuozzo. Now, however its 2 or 3 times a week. My VPS hosts confirm I am breaching the 2gb memory limit, at which point all VPS processes are killed to stop it bringing the entire node down. I have not made any config changes to it at all - I was running New Relic on it for a short while, but have removed that in case it was contributing to the issues. I can see nothing in the logs which indicates an issue and we have no CRON jobs running at the time the crashes happen. The site generates steady, but not huge amounts of traffic (averaging usually less than 100 visits per day) Is there anything in particular I should have done to the Apache or PHP configs to help? Im not a massivley experienced Apache admin, but know more than enough to solve most problems... Failing that, any other ideas that might help? Can't afford for this site to be down this much.

  Read the article

• Bacula v5.0.2 Windows Installation Issues

  - by JohnyD

  First off, I am very new to Bacula but I'm very intriqued from what I've read. I'm looking to set up Bacula 5.0.2 on a Windows 2008 R2 server. I've run the installer and at the end it asks me to configure DIR name, DIR password, DIR Address. Windows documentation is somewhat hard to come by and I'm not certain what exactly I'm supposed to enter here. Do I need to create a local account that matches this info? Will the installation process create the account for me? Will this be the account that handles the FD daemon/service? I'm also not certain if Address means network location or local direcory. I apologize for my ignorance. Currently I'm trying to use the following information: Name: john pass: john address: thin1 (server name although I have also tried thin1.fqdm.local and 10.0.0.104) This info allows for the installer to complete successfully. However, when I run the BAT it hangs at, "Connecting to Director thin1:9101". The Bacula File Service is currently running under the local system account. What am I doing wrong? What do I have yet to do? Once I get this working properly I assume I will need to install clients on all my Windows boxes? Also, this is a 64-bit cpu but I am installing the 32-bit client. Are there any issues with this? Should I be using the 32-bit client? Thanks very much for the help.

  Read the article

• mysql mass insert data

  - by user12145

  Edit: I realized that if I construct a large query in memory, the speed has increased almost 10 times of magnitude "insert ignore into xxx(col1, col2) values('a',1), values('b',1), values('c',1)..." Edit: since I have an index on the first column, the insert time creeps up as I insert more. Can I delay the index until the end? Original: I'm using the following to batch insert 10 million rows into mysql db(not all at once, since they don't all fit into memory), it's too slow(taking many hours). should I use load file to improve performance? I would have to create a second file to store all the 10 million rows, then load that into db. are there better ways? PreparedStatement st=con.prepareStatement("insert ignore into xxx (col1, col2) "+ " values (?, 1)"); Iterator d=data.iterator(); while(d.hasNext()){ st.clearParameters(); st.setString(1, (d.next()).toLowerCase()); st.addBatch(); } int[]updateCounts=st.executeBatch();

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• Domain Environment + Certificate Authority + Server 2008 R2

  - by user1110302

  I have recently been delegated the task to setup a CA in our domain environment and have a question on why Microsoft does somethings the way they do lol. I have been trying to read up on what the best practices are for going about this task, and have decided that in an ideal CA environment you should have one “offline” Root CA, and then two subordinate CAs for redundancy/issuing the certs. That is all good, I understand how this works and why, but in messing with a sandbox I have setup, the way you go about adding certificate authorities to a domain environment seems extremely trivial and against all of their best practices… Dooes anyone know what the purpose is of an Enterprise Root CA that is integrated into Active Directory? From what I have read, once you setup an Enterprise Root CA that is integrated into Active Directory, it stays with Active Directory for the long haul and must not be turned off/renamed/touched under any circumstances. If this is true, that seems to go against the practice of setting up a standalone root CA, adding the subordinates, and then taking the root offline. Thanks for any feedback you may have to offer!

  Read the article

• I used disk copy to clone my drive, now my windows 7 profile won't load correctly

  - by RzK

  I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

  Read the article

• Exim 4 Virtual Domains and Catchall on Debian (Squeeze)

  - by parazuce

  Hello, I've been at it for about 4 hours now. Searching as well as trying different tutorials. Here's my setup: I have 2 domains, both under my own DNS server (MX records setup as well). I have exim4 successfully running, and it is able to send messages from both of those domains. I have tested this using sendmail, and manually setting the "From" attribute. Exim successfully delivers mail to users no matter which domain was specified. I'm fine with that, but I'm having an issue editing virtual domains, and adding custom delivery options (such as a catch all). I've been searching for about 4 hours, and I can't find any up-to-date documentation on how to do this. The old methods would be to add a line such as: domainlist local_domains = @:localhost:dsearch;/etc/exim4/virtual Once that line was added, I made a directory at /etc/exim4/virtual, then created files inside such as example.com which would then contain rules for delivery under that domain. This did not work, however. Searching further, I've found that exim no longer supports dsearch (I guess because they claim it never has?) This is where I'm stuck. I'm on a "split" configuration as well.

  Read the article

• Cisco SA520 to Adtran 1234 no DHCP transfer

  - by Grico

  I am trying to set up a Cisco SA520 to run DHCP on my network. I have a vendor provided switch, the Adtran 1234, and it provides DHCP for our phone systems on VLAN 200. I do not have access to the Adtran, but the vendor gave me a IP on port 1 for WAN and said port 2 should be for the "trust" side should go. I did setup a mini lab where, Adtran 1 went to SA520 WAN port, and SA520 trust 1 went to my laptop. Everything worked fine, I could ping and get internet using the DHCP scope I put on the SA520. I then unplugged my computer from SA520 trust 1 and plugged it into Adtran 2. I plugged my computer into Adtran 23 and I dont get DHCP or even a link light. If I restart my machine, I get a brief link and then it dies once the machine boots. I have tried several ports on the Adtran and none seem to work. Different cables as well. However, when I plug a phone into the Adtran, the phone boot immediately and shows link. Thoughts?

  Read the article

• Windows xp mapped drives disconnect from Windows 7 on Peer to Peer network

  - by Kathryn Codo

  I have a 5 user peer to peer network. 2-XP machines, 3- Windows 7 machines and a Windows 7 machine acting as the file server. I have NO issues with the Windows 7 machines staying connected via the mapped drives to the "server". However, once a day the 2 XP machines will not connect to the Windows 7 machine "server" via the mapped drives. I must restart the "server" in order to see the server and access the files via the mapped drives or Explorer. I have tried the persistent : yes command in NET USE, on the XP machines and also setting a static IP address on the "server". I've turned the firewall off on the "server:, no difference so I turned the firewall back on. No interruption occurs with the internet when this happens, just can't see the server. Again, the Windows 7 users are unaffected. I have gone into the advanced network settings on the "server" and added read/write permissions for Everyone as well as the users of the XP machines. I have double checked that we are all on the same WORKGROUP. I'm at a loss. It seems to happen around mid-day and I've not been able to find any activity that is happening at this time (Like someone plugging in a thumbdrive). Any suggestions would be greatly appreciated as my client is running old XP software he no longer has the disks for and needs for his engineering firm.

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >