Search Results

Search found 12582 results on 504 pages for 'remove'.

Page 463/504 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

• WCF facility : Metadata publishing for this service is currently disabled

  - by cvista

  I asked this before and got no where so i'm asking again as i'm now desperate!! Hey if i create a new wcf project i can browse the meta instantly. if I try - when using the WCF facility - i get the following: Metadata publishing for this service is currently disabled. i followed the instructions there and in a million other places and get no where. if i copy the contents of my faciltity service into the newly created project it complains that aspNetCompatibilityEnabled isnt enabled. so i enable it and then mex is disabled again and i get: Metadata publishing for this service is currently disabled. again!! this is driving me crazy - i have tried tried tried to follow every example on the web!! here is my current configuration - there is no client yet: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <services> <service name="IbzStar.WebServices.UserServices" behaviorConfiguration="ServiceBehavior"> <!-- Service Endpoints --> <endpoint address="" binding="wsHttpBinding" contract="IbzStar.WebServices.IUserServices"> <!-- Upon deployment, the following identity element should be removed or replaced to reflect the identity under which the deployed service runs. If removed, WCF will infer an appropriate identity automatically. --> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> please someone help me out before my laptop gets launched into orbit!! w://

  Read the article

• How we can perform Action on Sequence UIButtons?

  - by Prince Shazad

  As My Screen shot show that i am working on word matching game.In this game i assign my words to different UIButtons in Specific sequence on different loctions(my red arrow shows this sequence)and of rest UIButtons i assign a one of random character(A-Z).when i Click on any UIButtons its title will be assign to UILabel which is in Fornt of Current Section:i campare this UILabel text to below UILabels text which is in fornt of timer.when it match to any of my UILabels its will be deleted.i implement all this process already. But my problem is that which is show by black lines.if the player find the first word which is "DOG". he click the Two UIButtons in Sequence,but not press the Third one in Sequence.(as show by black line).so here i want that when player press the any UIButtons which is not in Sequence then remove the previous text(which is "DO") of UILabel and now the Text of UILabel is only "G" . Here is my code to get the UIButtons titles and assign it UILabel. - (void)aMethod:(id)sender { UIButton *button = (UIButton *)sender; NSString *get = (NSString *)[[button titleLabel] text]; NSString *origText = mainlabel.text; mainlabel.text = [origText stringByAppendingString:get]; if ([mainlabel.text length ]== 3) { if([mainlabel.text isEqualToString: a]){ lbl.text=@"Right"; [btn1 removeFromSuperview]; score=score+10; lblscore.text=[NSString stringWithFormat:@"%d",score]; words=words-1; lblwords.text=[NSString stringWithFormat:@"%d",words]; mainlabel.text=@""; a=@"tbbb"; } else if([mainlabel.text isEqualToString: c]){ lbl.text=@"Right"; [btn2 removeFromSuperview]; score=score+10; lblscore.text=[NSString stringWithFormat:@"%d",score]; words=words-1; lblwords.text=[NSString stringWithFormat:@"%d",words]; mainlabel.text=@""; c=@"yyyy"; } else if([mainlabel.text isEqualToString: d]){ lbl.text=@"Right"; [btn3 removeFromSuperview]; score=score+10; lblscore.text=[NSString stringWithFormat:@"%d",score]; words=words-1; lblwords.text=[NSString stringWithFormat:@"%d",words]; mainlabel.text=@""; d=@"yyyy"; } else { lbl.text=@"Wrong"; mainlabel.text=@""; } }} Thanx in advance

  Read the article

• how to create a system-wide independent universal counter object primarily for Database keys?

  - by andora

  I would like to create/use a system-wide independent universal 'counter object' that can be called via COM in a thread-safe manner. The counter object will be passed an ID to identify which counter to return, handle the counting, 'persist' the count (occasionally), have reasonable performance (as fast as possible) perhaps capable of 1000 counts per second or better (1mS) and be accessible cross-process/out-of-process. The current count status must be persisted between object restarts/shutdowns. The counter object is liklely to be a 'singleton' type object implemented in some form of free-threaded dictionary, containing maybe 10 counters (perhaps 50 max). The count needs to be monotonic and consistent, (ie: guaranteed unique sequential values). Each counter should have a few methods, like reset, inc, dec, set, clear, remove. As a luxury, I would like to have a variable-increment (ie: 'step by' value). To support thread-safefty, perhaps some sorm of critical-section or mutex call. It just needs to return a long/4byte signed integer. I really want something that can be called from anywhere, including VBScript, so I figure COM is my preferred solution. The primary use of this is for database keys. I am unable to use autoinc or guid type keys and have ruled out database-generated counting systems at this point. I've spent days researching this and I have really struggled to find a solution. The best I can find is a free-threaded dictionary object that can be instantiated using COM+ from Motobit - it seems to offer all the 'basics' and I guess I could create some form of wrapper for this. So, here are my questions: Does such a 'general purpose counter-object already exist? Can you direct me to it? (MS did do an IIS/ASP object called 'MSWC.Counter' but this isn't 'cross-process'/ out-of-process component and isn't thread-safe. (but if it was, it would do!) What is the best way of creating such a Component? (I'd prefer VB6 right-now, [don't ask!] but can do in VB.NET2005 if I had to). I don't have the skills/knowledge/tools to use anything else. I am desparate for a workable solution. I need specific guidance! If anybody can code something up for me I am prepared to pay for it.

  Read the article

• Implementing a logging library in .NET with a database as the storage medium

  - by Dave

  I'm just starting to work on a logging library that everyone can use to keep track of any sort of system information while the user is running our application. The simplest example so far is to track Info, Warnings, and Errors. I want all plugins to be able to use this feature, but since each developer might have a different idea of what's important to report, I want to keep this as generic as possible. In the C++ world, I would normally use something like a stl::pair<string,string> to act as a key value pair structure, and have a stl::list of these to act as a "row" in the log. The log cache would then be a list<list<pair<string,string>>> (ugh!). This way, the developers can use a const string key like INFO, WARNING, ERROR to have a consistent naming for a column in the database (for SELECTing specific types of information). I'd like the database to be able to deal with any number of distinct column names. For example, John might have an INFO row with a column called USER, and Bill might have an INFO row with a column called FILENAME. I want the log viewer to be able to display all information, and if one report doesn't have a value for INFO / FILENAME, those fields should just appear blank. So one option is to use List<List<KeyValuePair<String,String>>, and the another is to have the log library consumer somehow "register" its schema, and then have the database do an ALTER TABLE to handle this situation. Yet another idea is to have a table that's just for key value pairs, with a foreign key that maps the key value pairs back to the original log entry. I obviously don't want logging to bog down the system, so I only lock the log cache to make a copy of the data (and remove the already-copied data), then a background thread will dump the information to the database. My specific questions regarding this are: Do you see any performance issues? In other words, have you ever tried something like this and found that certain things just don't work well in practice? Is there a more .NETish way to implement the key value pairs, other than List<List<KeyValuePair<String,String>>>? Even if there is a way to do #2 better, is the ALTER TABLE idea I proposed above a Bad Thing? Would you recommend multiple databases over a single one? I don't yet have an idea of how frequently the log would get written to, but we ideally would like to have lots of low level information. Perhaps there should be a DB with a fixed schema only for the low level stuff, and then another DB that's more flexible for reporting information back to users.

  Read the article

• Bad_alloc exception when using new for a struct c++

  - by bsg

  Hi, I am writing a query processor which allocates large amounts of memory and tries to find matching documents. Whenever I find a match, I create a structure to hold two variables describing the document and add it to a priority queue. Since there is no way of knowing how many times I will do this, I tried creating my structs dynamically using new. When I pop a struct off the priority queue, the queue (STL priority queue implementation) is supposed to call the object's destructor. My struct code has no destructor, so I assume a default destructor is called in that case. However, the very first time that I try to create a DOC struct, I get the following error: Unhandled exception at 0x7c812afb in QueryProcessor.exe: Microsoft C++ exception: std::bad_alloc at memory location 0x0012f5dc.. I don't understand what's happening - have I used up so much memory that the heap is full? It doesn't seem likely. And it's not as if I've even used that pointer before. So: first of all, what am I doing that's causing the error, and secondly, will the following code work more than once? Do I need to have a separate pointer for each struct created, or can I re-use the same temporary pointer and assume that the queue will keep a pointer to each struct? Here is my code: struct DOC{ int docid; double rank; public: DOC() { docid = 0; rank = 0.0; } DOC(int num, double ranking) { docid = num; rank = ranking; } bool operator>( const DOC & d ) const { return rank > d.rank; } bool operator<( const DOC & d ) const { return rank < d.rank; } }; //a lot of processing goes on here; when a matching document is found, I do this: rank = calculateRanking(table, num); //if the heap is not full, create a DOC struct with the docid and rank and add it to the heap if(q.size() < 20) { doc = new DOC(num, rank); q.push(*doc); doc = NULL; } //if the heap is full, but the new rank is greater than the //smallest element in the min heap, remove the current smallest element //and add the new one to the heap else if(rank > q.top().rank) { q.pop(); cout << "pushing doc on to queue" << endl; doc = new DOC(num, rank); q.push(*doc); } Thank you very much, bsg.

  Read the article

• jQuery post request is not sent until first post request is compleated

  - by Champ

  I have a function which have a long execution time. public void updateCampaign() { context.Session[processId] = "0|Fetching Lead360 Campaign"; Lead360 objLead360 = new Lead360(); string campaignXML = objLead360.getCampaigns(); string todayDate = DateTime.Now.ToString("dd-MMMM-yyyy"); context.Session[processId] = "1|Creating File for Lead360 Campaign on " + todayDate; string fileName = HttpContext.Current.Server.MapPath("campaigns") + todayDate + ".xml"; objLead360.createFile(fileName, campaignXML); context.Session[processId] = "2|Reading The latest Lead360 Campaign"; string file = File.ReadAllText(fileName); context.Session[processId] = "3|Updating Lead360 Campaign"; string updateStatus = objLead360.updateCampaign(fileName); string[] statusArr = updateStatus.Split('|'); context.Session[processId] = "99|" + statusArr[0] + " New Inserted , " + statusArr[1] + " Updated , With " + statusArr[2] + " Error , "; } So to track the Progress of the function I wrote a another function public void getProgress() { if (context.Session[processId] == null) { string json = "{\"error\":true}"; Response.Write(json); Response.End(); }else{ string[] status = context.Session[processId].ToString().Split('|'); if (status[0] == "99") context.Session.Remove(processId); string json = "{\"error\":false,\"statuscode\":" + status[0] + ",\"statusmsz\":\"" + status[1] + "\" }"; Response.Write(json); Response.End(); } } To call this by jQuery post request is used reqUrl = "AjaxPages/lead360Campaign.aspx?processid=" + progressID + "&action=updatecampaign"; $.post(reqUrl); setTimeout(getProgress, 500); get getProgress is : function getProgress() { reqUrl = "AjaxPages/lead360Campaign.aspx?processid=" + progressID + "&action=getProgress"; $.post(reqUrl, function (response) { var progress = jQuery.parseJSON(response); console.log(progress) if (progress.error) { $("#fetchedCampaign .waitingMsz").html("Some error occured. Please try again later."); $("#fetchedCampaign .waitingMsz").css({ "background": "url(common/images/ajax_error.jpg) no-repeat center 6px" }); return; } if (progress.statuscode == 99) { $("#fetchedCampaign .waitingMsz").html("Update Status :"+ progress.statusmsz ); $("#fetchedCampaign .waitingMsz").css({ "background": "url(common/images/ajax_loded.jpg) no-repeat center 6px" }); return; } $("#fetchedCampaign .waitingMsz").html("Please Wait... " + progress.statusmsz); setTimeout(getProgress, 500); }); } But the problem is that I can't see the intermediate message. Only the last message is been displayed after a long lime of ajax loading message Also on the browser console I just see that after a long time first requested is completed and after that the second request is completed. but there should be for getProgress ? I have checked jquery.doc and it says that $post is an asynchronous request. Can anyone please explain what is wrong with the code or logic?

  Read the article

• PHP 'instanceof' failing with class constant

  - by Nathan Loding

  I'm working on a framework that I'm trying to type as strongly as I possibly can. (I'm working within PHP and taking some of the ideas that I like from C# and trying to utilize them within this framework.) I'm creating a Collection class that is a collection of domain entities/objects. It's kinda modeled after the List<T> object in .Net. I've run into an obstacle that is preventing me from typing this class. If I have a UserCollection, it should only allow User objects into it. If I have a PostCollection, it should only allow Post objects. All Collections in this framework need to have certain basic functions, such as add, remove, iterate. I created an interface, but found that I couldn't do the following: interface ICollection { public function add($obj) } class PostCollection implements ICollection { public function add(Post $obj) {} } This broke it's compliance with the interface. But I can't have the interface strongly typed because then all Collections are of the same type. So I attempted the following: interface ICollection { public function add($obj) } abstract class Collection implements ICollection { const type = 'null'; } class PostCollection { const type = 'Post'; public function add($obj) { if(!($obj instanceof self::type)) { throw new UhOhException(); } } } When I attempt to run this code, I get syntax error, unexpected T_STRING, expecting T_VARIABLE or '$' on the instanceof statement. A little research into the issue and it looks like the root of the cause is that $obj instanceof self is valid to test against the class. It appears that PHP doesn't process the entire self::type constant statement in the expression. Adding parentheses around the self::type variable threw an error regarding an unexpected '('. An obvious workaround is to not make the type variable a constant. The expression $obj instanceof $this->type works just fine (if $type is declared as a variable, of course). I'm hoping that there's a way to avoid that, as I'd like to define the value as a constant to avoid any possible change in the variable later. Any thoughts on how I can achieve this, or have I take PHP to it's limit in this regard? Is there a way of "escaping" or encapsulating self::this so that PHP won't die when processing it?

  Read the article

• How Do I Prevent Rails From Treating Edit Fields_For Differently From New Fields_For

  - by James

  I am using rails3 beta3 and couchdb via couchrest. I am not using active record. I want to add multiple "Sections" to a "Guide" and add and remove sections dynamically via a little javascript. I have looked at all the screencasts by Ryan Bates and they have helped immensely. The only difference is that I want to save all the sections as an array of sections instead of individual sections. Basically like this: "sections" => [{"title" => "Foo1", "content" => "Bar1"}, {"title" => "Foo2", "content" => "Bar2"}] So, basically I need the params hash to look like that when the form is submitted. When I create my form I am doing the following: <%= form_for @guide, :url => { :action => "create" } do |f| %> <%= render :partial => 'section', :collection => @guide.sections %> <%= f.submit "Save" %> <% end %> And my section partial looks like this: <%= fields_for "sections[]", section do |guide_section_form| %> <%= guide_section_form.text_field :section_title %> <%= guide_section_form.text_area :content, :rows => 3 %> <% end %> Ok, so when I create the guide with sections, it is working perfectly as I would like. The params hash is giving me a sections array just like I would want. The problem comes when I want edit guide/sections and save them again because rails is inserting the id of the guide in the id and name of each form field, which is screwing up the params hash on form submission. Just to be clear, here is the raw form output for a new resource: <input type="text" size="30" name="sections[][section_title]" id="sections__section_title"> <textarea rows="3" name="sections[][content]" id="sections__content" cols="40"></textarea> And here is what it looks like when editing an existing resource: <input type="text" value="Foo1" size="30" name="sections[cd2f2759895b5ae6cb7946def0b321f1][section_title]" id="sections_cd2f2759895b5ae6cb7946def0b321f1_section_title"> <textarea rows="3" name="sections[cd2f2759895b5ae6cb7946def0b321f1][content]" id="sections_cd2f2759895b5ae6cb7946def0b321f1_content" cols="40">Bar1</textarea> How do I force rails to always use the new resource behavior and not automatically add the id to the name and value. Do I have to create a custom form builder? Is there some other trick I can do to prevent rails from putting the id of the guide in there? I have tried a bunch of stuff and nothing is working. Thanks in advance!

  Read the article

• Calling a function within a class

  - by JM4

  I am having trouble calling a specific function within a class. The call is made: case "Mod10": if (!validateCreditCard($fields[$field_name])) $errors[] = $error_message; break; and the class code is: class CreditCardValidationSolution { var $CCVSNumber = ''; var $CCVSNumberLeft = ''; var $CCVSNumberRight = ''; var $CCVSType = ''; var $CCVSError = ''; function validateCreditCard($Number) { $this->CCVSNumber = ''; $this->CCVSNumberLeft = ''; $this->CCVSNumberRight = ''; $this->CCVSType = ''; $this->CCVSError = ''; // Catch malformed input. if (empty($Number) || !is_string($Number)) { $this->CCVSError = $CCVSErrNumberString; return FALSE; } // Ensure number doesn't overrun. $Number = substr($Number, 0, 20); // Remove non-numeric characters. $this->CCVSNumber = preg_replace('/[^0-9]/', '', $Number); // Set up variables. $this->CCVSNumberLeft = substr($this->CCVSNumber, 0, 4); $this->CCVSNumberRight = substr($this->CCVSNumber, -4); $NumberLength = strlen($this->CCVSNumber); $DoChecksum = 'Y'; // Mod10 checksum process... if ($DoChecksum == 'Y') { $Checksum = 0; // Add even digits in even length strings or odd digits in odd length strings. for ($Location = 1 - ($NumberLength % 2); $Location < $NumberLength; $Location += 2) { $Checksum += substr($this->CCVSNumber, $Location, 1); } // Analyze odd digits in even length strings or even digits in odd length strings. for ($Location = ($NumberLength % 2); $Location < $NumberLength; $Location += 2) { $Digit = substr($this->CCVSNumber, $Location, 1) * 2; if ($Digit < 10) { $Checksum += $Digit; } else { $Checksum += $Digit - 9; } } // Checksums not divisible by 10 are bad. if ($Checksum % 10 != 0) { $this->CCVSError = $CCVSErrChecksum; return FALSE; } } return TRUE; } } When I run the application - I get the following message: Fatal error: Call to undefined function validateCreditCard() in C:\xampp\htdocs\validation.php on line 339 any ideas?

  Read the article

• Silverlight MVVM MEF ViewInjection

  - by silverfighter

  Hi all, since my title is buzzword compliant I hope I will get lots of answers to my question or any pointers to the right direction. OK what I usually do is have a ViewModel which contains a list of ViewModels itself. public class MasterViewModel { public ObservableCollection<DetailViewModel> DetailViewModels { get; set; } public DetailViewModel Detail { get; set; } } <ItemsControl ItemsSource="{Binding DetailViewModels}"> <ItemsControl> <ItemsPanelTemplate> <StackPanel /> </ItemsPanelTemplate> </ItemsControl> <ItemsControl.ItemTemplate> <DataTemplate> <views:DetailsView /> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> With this in mind I will now come to my questions. I read a lot of good things about MEF and also saw the dashboard sample of Glenn Block but this was not helping me enough. What I want to do is sidbar (like the windows sidebar). Sidebar = StackPanel ListItems = Gadget ButI want it MVVM style OK I have something like a contract IGadget I implemented an custom Export. [ExportGadget(GadgetType = GadgetTypes.News)] I have my NewsGadgetView.xaml (which implements IGadget) and imports the NewsGadgetViewModel and also makes itself available as ExportGadget. so far so good. With this I can create a set of gadgets. Then I have my SidbarView.xaml which imports a sidebarViewModel. and now I get lost... I thought of something like a GadgetFactory which uses PartCreator to create my Gadgets. but this would sit in my SidebarView.xaml But I want to have control over my Gadgets to add and remove them from my sidebar. So I thought about something like an ObserveableCollection... Which I bind to The GadgetHost is basicaly Grid which will dynamicaly load the Gadget.... So how would I create my sidebar containing different gadgets without knowing which Gadgets are available and have a ViewModel for the sidebar as well as for each gadget?... Thanks for any help....

  Read the article

• using CSS to center FLOATED input elements wrapped in a DIV

  - by Tim

  There's no shortage of questions and answers about centering but I've not been able to get it to work given my specific circumstances, which involve floating. I want to center a container DIV that contains three floated input elements (split-button, text, checkbox), so that when my page is resized wider, they go from this: ||.....[ ][v] [ ] [ ] label .....|| to this ||......................[ ][v] [ ] [ ] label.......................|| They float fine, but when the page is made wider, they stay to the left: ||.....[ ][v] [ ] [ ] label .......................................|| If I remove the float so that the input elements are stacked rather than side-by-side: [ ][v] [ ] [ ] label then they DO center correctly when the page is resized. SO it is the float being applied to the elements of the DIV#hbox inside the container that is messing up the centering. Is what I want to do impossible because of the way float is designed to work? Here is my DOCTYPE, and the markup does validate at w3c: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> Here is my markup: <div id="term1-container"> <div class="hbox"> <div> <button id="operator1" class="operator-split-button">equals</button> <button id="operator1drop">show all operators</button> </div> <div><input type="text" id="term1"></input></div> <div><input type="checkbox" id="meta2"></input><label for="meta2" class="tinylabel">meta</label></div> </div> </div> And here's the (not-working) CSS: #term1-container {text-align: center} .hbox {margin: 0 auto;} .hbox div {float:left; } I have also tried applying display: inline-block to the floated button, text-input, and checkbox; and even though I think it applies only to text, I've also tried applying white-space: nowrap to the #term1-container DIV, based on posts I've seen here on SO. And just to be a little more complete, here's the jQuery that creates the split-button: $(".operator-split-button").button().click( function() { alert( "foo" ); }).next().button( { text: false, icons: { primary: "ui-icon-triangle-1-s" } }).click( function(){positionOperatorsMenu();} ) })

  Read the article

• How to listen for file system changes MAC - kFSEventStreamCreateFlagWatchRoot

  - by Cocoa Newbie

  Hi All, I am listening for Directory and disk changes in a COCOA project using FSEvents. I need to get events when a root folder is renamed or deleted. So, I passed kFSEventStreamCreateFlagWatchRoot while creating the FSEventStream.But even if I delete or rename the root folder I am not getting corresponding FSEventStreamEventFlags. Any idea what could possibly be the issue. I am listening for changes in a USB mounted device. I used both FSEventStreamCreate and FSEventStreamCreateRelativeToDevice. One thing I notices is when I try with FSEventStreamCreate I get the following error message while creating FSEventStream: (CarbonCore.framework) FSEventStreamCreate: watch_all_parents: error trying to add kqueue for fd 7 (/Volumes/NO NAME; Operation not supported) But with FSEventStreamCreateRelativeToDevice there are no errors but still not getting kFSEventStreamEventFlagRootChanged in event flags. Also, while creation using FSEventStreamCreateRelativeToDevice apple say's if I want to listen to root path changes pass emty string "". But I am not able to listen to root path changes by passing empty string. But when I pass "/" it works. But even for "/" I do not get any proper FSEventStreamEventFlags. I am pasting the code here: -(void) subscribeFileSystemChanges:(NSString*) path { PRINT_FUNCTION_BEGIN; // if already subscribed then unsubscribe if (stream) { FSEventStreamStop(stream); FSEventStreamInvalidate(stream); /* will remove from runloop */ FSEventStreamRelease(stream); } FSEventStreamContext cntxt = {0}; cntxt.info = self; CFArrayRef pathsToWatch = CFArrayCreate(NULL, (const void**)&path, 1, NULL); stream = FSEventStreamCreate(NULL, &feCallback, &cntxt, pathsToWatch, kFSEventStreamEventIdSinceNow, 1, kFSEventStreamCreateFlagWatchRoot ); FSEventStreamScheduleWithRunLoop(stream, CFRunLoopGetCurrent(), kCFRunLoopDefaultMode); FSEventStreamStart(stream); } call back function: static void feCallback(ConstFSEventStreamRef streamRef, void* pClientCallBackInfo, size_t numEvents, void* pEventPaths, const FSEventStreamEventFlags eventFlags[], const FSEventStreamEventId eventIds[]) {? char** ppPaths = (char**)pEventPaths; int i; for (i = 0; i < numEvents; i++) { NSLog(@"Event Flags %lu Event Id %llu", eventFlags[i], eventIds[i]); NSLog(@"Path changed: %@", [NSString stringWithUTF8String:ppPaths[i]]); } } Thanks a lot in advance.

  Read the article

• Monitoring UDP socket in glib(mm) eats up CPU time

  - by Gyorgy Szekely

  Hi, I have a GTKmm Windows application (built with MinGW) that receives UDP packets (no sending). The socket is native winsock and I use glibmm IOChannel to connect it to the application main loop. The socket is read with recvfrom. My problem is: this setup eats 25% percent CPU time on a 3GHz workstation. Can somebody tell me why? The application is idle in this case, and if I remove the UDP code, CPU usage drops down to almost zero. As the application has to perform some CPU intensive tasks, I could image better ways to spend that 25% Here are some code excerpts: (sorry for the printf's ;) ) /* bind */ void UDPInterface::bindToPort(unsigned short port) { struct sockaddr_in target; WSADATA wsaData; target.sin_family = AF_INET; target.sin_port = htons(port); target.sin_addr.s_addr = 0; if ( WSAStartup ( 0x0202, &wsaData ) ) { printf("WSAStartup failed!\n"); exit(0); // :) WSACleanup(); } sock = socket( AF_INET, SOCK_DGRAM, 0 ); if (sock == INVALID_SOCKET) { printf("invalid socket!\n"); exit(0); } if (bind(sock,(struct sockaddr*) &target, sizeof(struct sockaddr_in) ) == SOCKET_ERROR) { printf("failed to bind to port!\n"); exit(0); } printf("[UDPInterface::bindToPort] listening on port %i\n", port); } /* read */ bool UDPInterface::UDPEvent(Glib::IOCondition io_condition) { recvfrom(sock, (char*)buf, BUF_SIZE*4, 0, NULL, NULL); /* process packet... */ } /* glibmm connect */ Glib::RefPtr channel = Glib::IOChannel::create_from_win32_socket(udp.sock); Glib::signal_io().connect( sigc::mem_fun(udp, &UDPInterface::UDPEvent), channel, Glib::IO_IN ); I've read here in some other question, and also in glib docs (g_io_channel_win32_new_socket()) that the socket is put into nonblocking mode, and it's "a side-effect of the implementation and unavoidable". Does this explain the CPU effect, it's not clear to me? Whether or not I use glib to access the socket or call recvfrom() directly doesn't seem to make much difference, since CPU is used up before any packet arrives and the read handler gets invoked. Also glibmm docs state that it's ok to call recvfrom() even if the socket is polled (Glib::IOChannel::create_from_win32_socket()) I've tried compiling the program with -pg and created a per function cpu usage report with gprof. This wasn't usefull because the time is not spent in my program, but in some external glib/glibmm dll.

  Read the article

• Ruby: UnknownAttributeError

  - by Flexo

  Hi i have some Orders that can have several Items and these Items have an associated Kind. The Kind can belong to many Items. but i get a "unknown attribute: kinds" in my OrdersController when i hit the submit form button. I use nested forms btw. Order.rb class Order < ActiveRecord::Base validates_presence_of :ref_nr, :total_price has_many :items, :dependent => :destroy has_many :kinds, :through => :items accepts_nested_attributes_for :items accepts_nested_attributes_for :kinds validates_associated :items validates_associated :kinds end Item.rb class Item < ActiveRecord::Base belongs_to :order has_one :kind accepts_nested_attributes_for :kind validates_associated :kind end Kind.rb class Kind < ActiveRecord::Base belongs_to :item end OrdersController.rb:Create def create @order = Order.new(params[:order]) end new.erb.html <% form_for @order do |f| %> <%= f.error_messages %> <% f.fields_for :items do |builder| %> <table> <tr> <% f.fields_for :kinds do |m| %> <td><%= m.collection_select :kind, Kind.find(:all, :order => "created_at DESC"), :id, :name, {:prompt => "Select a Type" }, {:id => "selector", :onchange => "type_change(this)"} %></td> <% end %> <td><%= f.text_field :amount, :id => "amountField", :onchange => "change_total_price()" %></td> <td><%= f.text_field :text, :id => "textField" %></td> <td><%= f.text_field :price, :class => "priceField", :onChange => "change_total_price()" %></td> <td><%= link_to_remove_fields "Remove Item", f %></td> </tr> </table> <% end %> <p><%= link_to_add_fields "Add Item", f, :items %></p> <p> <%= f.label :total_price %><br /> <%= f.text_field :total_price, :class => "priceField", :id => "totalPrice" %> </p> <p><%= submit_tag %></p> <% end %> i cant see what im missing

  Read the article

• jquery ie6 issue swaping videos through hide/show while playing.

  - by user217181

  So my code is: Click the link show the div. I'm using the jquery flash embed object. $(document).ready( function() { $('a.overview').click( function() { $('#overview').show(); // show div.contact $('#evaulting').hide(); // hide div.contact $('#his').hide(); // hide div.contact }); }); $(document).ready( function() { $('a.evaulting').click( function() { $('#evaulting').show(); // show div.contact $('#overview').hide(); // hide div.contact $('#his').hide(); // hide div.contact }); }); <div id="overview" style="display:none"> <ul> <li rel="play-norelated.swf:680:480:true:ffffff" class="flash-replaced"> <embed width="680" height="480" type="application/x-shockwave-flash" src="play-norelated.swf" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="playVideo=ent_web_480x" bgcolor="ffffff" /> <div class="alt"><h1>To Play Iron Mountain Videos - You will need to upgrade your Flash Player</h1> <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p></div> </li> </ul> </div> <div id="evaulting" style="display:none"> <ul> <li rel="play-norelated.swf:680:480:true:ffffff" class="flash-replaced"> <embed width="680" height="480" type="application/x-shockwave-flash" src="play-norelated.swf" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="playVideo=evaulting_web_480x" bgcolor="ffffff" /> <div class="alt"><h1>To Play Iron Mountain Video's - You will need to upgrade your Flash Player</h1> <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p></div> </li> </ul> </div> When I repeat this code and get the second video to load on click. It works in all browsers. The only issue I'm running into is that in IE6 the video keeps playing and in other browsers it stops the video your watching and loads the one you clicked on. I looked into using the .remove object or the .append to a div, but I can't seem to get that to work and if it does work will it play nice with IE6. Try it out and maybe solve my issues.

  Read the article

• SEO Help with Pages Indexed by Google

  - by Joe Majewski

  I'm working on optimizing my site for Google's search engine, and lately I've noticed that when doing a "site:www.joemajewski.com" query, I get results for pages that shouldn't be indexed at all. Let's take a look at this page, for example: http://www.joemajewski.com/wow/profile.php?id=3 I created my own CMS, and this is simply a breakdown of user id #3's statistics, which I noticed is indexed by Google, although it shouldn't be. I understand that it takes some time before Google's results reflect accurately on my site's content, but this has been improperly indexed for nearly six months now. Here are the precautions that I have taken: My robots.txt file has a line like this: Disallow: /wow/profile.php* When running the url through Google Webmaster Tools, it indicates that I did, indeed, correctly create the disallow command. It did state, however, that a page that doesn't get crawled may still get displayed in the search results if it's being linked to. Thus, I took one more precaution. In the source code I included the following meta data: <meta name="robots" content="noindex,follow" /> I am assuming that follow means to use the page when calculating PageRank, etc, and the noindex tells Google to not display the page in the search results. This page, profile.php, is used to take the $_GET['id'] and find the corresponding registered user. It displays a bit of information about that user, but is in no way relevant enough to warrant a display in the search results, so that is why I am trying to stop Google from indexing it. This is not the only page Google is indexing that I would like removed. I also have a WordPress blog, and there are many category pages, tag pages, and archive pages that I would like removed, and am doing the same procedures to attempt to remove them. Can someone explain how to get pages removed from Google's search results, and possibly some criteria that should help determine what types of pages that I don't want indexed. In terms of my WordPress blog, the only pages that I truly want indexed are my articles. Everything else I have tried to block, with little luck from Google. Can someone also explain why it's bad to have pages indexed that don't provide any new or relevant content, such as pages for WordPress tags or categories, which are clearly never going to receive traffic from Google. Thanks!

  Read the article

• Updating UISearchDisplayController with Core Data results using GCD

  - by Brian Halpin

  I'm having trouble displaying the results from Core Data in my UISearchDisplayController when I implement GCD. Without it, it works, but obviously blocks the UI. In my SearchTableViewController I have the following two methods: - (BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString { // Tell the table data source to reload when text changes [self filterContentForSearchText:searchString]; // Return YES to cause the search result table view to be reloaded. return YES; } // Update the filtered array based on the search text -(void)filterContentForSearchText:(NSString*)searchText { // Remove all objects from the filtered search array [self.filteredLocationsArray removeAllObjects]; NSPredicate *predicate = [CoreDataMaster predicateForLocationUsingSearchText:@"Limerick"]; CoreDataMaster *coreDataMaster = [[CoreDataMaster alloc] init]; // Filter the array using NSPredicate self.filteredLocationsArray = [NSMutableArray arrayWithArray: [coreDataMaster fetchResultsFromCoreDataEntity:@"City" UsingPredicate:predicate]]; } You can probably guess that my problem is with returning the array from [coreDataMaster fetchResultsFromCoreDataEntity]. Below is the method: - (NSArray *)fetchResultsFromCoreDataEntity:(NSString *)entity UsingPredicate:(NSPredicate *)predicate { NSMutableArray *fetchedResults = [[NSMutableArray alloc] init]; dispatch_queue_t coreDataQueue = dispatch_queue_create("com.coredata.queue", DISPATCH_QUEUE_SERIAL); dispatch_async(coreDataQueue, ^{ NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entityDescription = [NSEntityDescription entityForName:entity inManagedObjectContext:self.managedObjectContext]; NSSortDescriptor *nameSort = [[NSSortDescriptor alloc] initWithKey:@"name" ascending:YES]; NSArray *sortDescriptors = [NSArray arrayWithObjects:nameSort, nil]; [fetchRequest setEntity:entityDescription]; [fetchRequest setSortDescriptors:sortDescriptors]; // Check if predicate is set if (predicate) { [fetchRequest setPredicate:predicate]; } NSError *error = nil; NSArray *fetchedManagedObjects = [self.managedObjectContext executeFetchRequest:fetchRequest error:&error]; for (City *city in fetchedManagedObjects) { [fetchedResults addObject:city]; } NSDictionary *userInfo = [NSDictionary dictionaryWithObject:[NSArray arrayWithArray:fetchedResults] forKey:@"results"]; [[NSNotificationCenter defaultCenter] postNotificationName:@"fetchResultsComplete" object:nil userInfo:userInfo]; }); return [NSArray arrayWithArray:fetchedResults]; } So the thread hasn't finished executing by the time it returns the results to self.filteredLocationsArray. I've tried added a NSNotification which passes the NSDictionary to this method: - (void)updateSearchResults:(NSNotification *)notification { NSDictionary *userInfo = notification.userInfo; NSArray *array = [userInfo objectForKey:@"results"]; self.filteredLocationsArray = [NSMutableArray arrayWithArray:array]; [self.tableView reloadData]; } I've also tried refreshing the searchViewController like [self.searchDisplayController.searchResultsTableView reloadData]; but to no avail. I'd really appreciate it if someone could point me in the right direction and show me where I might be going wrong. Thanks

  Read the article

• Copy all childNodes to an other element. In javascript native way.

  - by kroko

  Hello I have to change "unknown" contents of XML. The structure and content itself is valid. Original <blabla foo="bar"> <aa>asas</aa> <ff> <cc> <dd /> </cc> </ff> <gg attr2="2"> </gg> ... ... </blabla> becomes <blabla foo="bar"> <magic> <aa>asas</aa> <ff> <cc> <dd /> </cc> </ff> <gg attr2="2"> </gg> ... ... </magic> </blabla> thus, adding a child straight under document root node (document.documentElement) and "pushing" the "original" children under that. Here it has to be done in plain javascript (ecmascript). The idea now is to // Get the root node RootNode = mymagicdoc.documentElement; // Create new magic element (that will contain contents of original root node) var magicContainer = mymagicdoc.createElement("magic"); // Copy all root node children (and their sub tree - deep copy) to magic node /* ????? here RootNodeClone = RootNode.cloneNode(true); RootNodeClone.childNodes...... */ // Remove all children from root node while(RootNode.hasChildNodes()) RootNode.removeChild(RootNode.firstChild); // Now when root node is empty add the magicContainer // node in it that contains all the children of original root node RootNode.appendChild(magicContainer); How to do that /* */ step? Or maybe someone has a much better solution in general for achieving the desirable result? Thank you in advance!

  Read the article

• deleting element objects of a std vector using erase : a) memory handling and b) better way?

  - by memC

  hi, I have a vec_A that stores instances of class A as: vec_A.push_back(A()); I want to remove some elements in the vector at a later stage and have two questions: a) The element is deleted as: vec_A.erase(iterator) Is there any additional code I need to add to make sure that there is no memory leak? . b) Assume that condition if(num <5) is if num is among a specific numberList. Given this, is there a better way to delete the elements of a vector than what I am illustrating below? #include<vector> #include<stdio.h> #include<iostream> class A { public: int getNumber(); A(int val); ~A(){}; private: int num; }; A::A(int val){ num = val; }; int A::getNumber(){ return num; }; int main(){ int i =0; int num; std::vector<A> vec_A; std::vector<A>::iterator iter; for ( i = 0; i < 10; i++){ vec_A.push_back(A(i)); } iter = vec_A.begin(); while(iter != vec_A.end()){ std::cout << "\n --------------------------"; std::cout << "\n Size before erase =" << vec_A.size(); num = iter->getNumber() ; std::cout << "\n num = "<<num; if (num < 5){ vec_A.erase(iter); } else{ iter++; } std::cout << "\n size after erase =" << vec_A.size(); } std::cout << "\nPress RETURN to continue..."; std::cin.get(); return 0; }

  Read the article

• use jQuery to get 'true size' of image without removing the class

  - by jon3laze

  I am using Jcrop on an image that is resized with css for uniformity. JS <script type="text/javascript"> $(window).load(function() { //invoke Jcrop API and set options var api = $.Jcrop('#image', { onSelect: storeCoords, trueSize: [w, h] }); api.disable(); //disable until ready to use //enable the Jcrop on crop button click $('#crop').click(function() { api.enable(); }); }); function storeCoords(c) { $('#X').val(c.x); $('#Y').val(c.y); $('#W').val(c.w); $('#H').val(c.h); }; </script> HTML <body> <img src="/path/to/image.jpg" id="image" class="img_class" alt="" /> <br /> <span id="crop" class="button">Crop Photo</span> <span id="#X" class="hidden"></span> <span id="#Y" class="hidden"></span> <span id="#W" class="hidden"></span> <span id="#H" class="hidden"></span> </body> CSS body { font-size: 13px; width: 500px; height: 500px; } .image { width: 200px; height: 300px; } .hidden { display: none; } I need to set the h and w variables to the size of the actual image. I tried using the .clone() manipulator to make a copy of the image and then remove the class from the clone to get the sizing but it sets the variables to zeros. var pic = $('#image').clone(); pic.removeClass('image'); var h = pic.height(); var w = pic.width(); It works if I append the image to an element in the page, but these are larger images and I would prefer not to be loading them as hidden images if there is a better way to do this. Also removing the class, setting the variables, and then re-adding the class was producing sporadic results. I was hoping for something along the lines of: $('#image').removeClass('image', function() { h = $(this).height(); w = $(this).width(); }).addClass('image'); But the removeClass function doesn't work like that :P

  Read the article

• How to perform add/update of a model object that contains EntitySet

  - by David Liddle

  I have a similar concept to the SO questions/tags scenario however am trying to decide the best way of implementation. Tables Questions, QuestionTags and Tags Questions QuestionTags Tags --------- ------------ ---- QID QID TID QName TID TName When adding/updating a question I have 2 textboxes. The important part is a single textbox that allows users to enter in multiple Tags separated by spaces. I am using Linq2Sql so the Questions model has an EntitySet of QuestionTags with then link to Tags. My question is regarding the adding/updating of Questions (part 1), and also how to best show QuestionTags for a Question (part 2). Part 1 Before performing an add/update, my service layer needs to deal with 3 scenarios before passing to their respective repositories. Insert Tags that do not already exist Insert/Update Question Insert QuestionTags - when updating need to remove existing QuestionTags Here is my code below however started to get into a bit of a muddle. I've created extension methods on my repositories to get Tags WithNames etc. public void Add(Question q, string tags) { var tagList = tags.Split(new string[] { " " }, StringSplitOptions.RemoveEmptyEntries).ToList(); using (DB.TransactionScope ts = new DB.TransactionScope()) { var existingTags = TagsRepository.Get() .WithName(tagList) .ToList(); var newTags = (from t in tagList select new Tag { TName = t }).Except(existingTags, new TagsComparer()).ToList(); TagsRepository.Add(newTags); //need to insert QuestionTags QuestionsRepository.Add(q); ts.Complete(); } } Part 2 My second question is, when displaying a list of Questions how is it best to show their QuestionTags? For example, I have an Index view that shows a list of Questions in a table. One of the columns shows an image and when the user hovers over it shows the list of Tags. My current implementation is to create a custom ViewModel and show a List of QuestionIndexViewModel in the View. QuestionIndexViewModel { Question Question { get; set; } string Tags { get; set; } } However, this seems a bit clumsy and quite a few DB calls. public ViewResult Index() { var model= new List<QuestionIndexViewModel>(); //make a call to get a list of questions //foreach question make a call to get their QuestionTags, //to be able to get their Tag names and then join them //to form a single string. return View(model); } Also, just for test purposes using SQL Profiler, I decided to iterate through the QuestionTags entity set of a Question in my ViewModel however nothing was picked up in Profiler? What would be the reason for this?

  Read the article

• drupal jQuery 1.4 on specific pages

  - by Mark

  I'm looking for a way to force drupal to use 1.4 on specific pages. This is the same as this old question:http://stackoverflow.com/questions/2842792/drupal-jquery-1-4-on-specific-pages It look me a while to try the answer which I marked correct. But because I'm new to module dev overall I couldn't figure it out based on the answer. The code from that answer looked like this: /** * Implementation of hook_theme_registry_alter(). * Based on the jquery_update module. * * Make this page preprocess function runs *last*, * so that a theme can't call drupal_get_js(). */ function MYMODULE_theme_registry_alter(&$theme_registry) { if (isset($theme_registry['page'])) { // See if our preprocess function is loaded, if so remove it. if ($key = array_search('MYMODULE_preprocess_page', $theme_registry['page']['preprocess functions'])) { unset($theme_registry['page']['preprocess functions'][$key]); } // Now add it on at the end of the array so that it runs last. $theme_registry['page']['preprocess functions'][] = 'MYMODULE_preprocess_page'; } } /** * Implementation of moduleName_preprocess_hook(). * Based on the jquery_update module functions. * * Strips out JS and CSS for a path. */ function MYMODULE_preprocess_page(&$variables, $arg = 'my_page', $delta=0) { // I needed a one hit wonder. Can be altered to use function arguments // to increase it's flexibility. if(arg($delta) == $arg) { $scripts = drupal_add_js(); $css = drupal_add_css(); // Only do this for pages that have JavaScript on them. if (!empty($variables['scripts'])) { $path = drupal_get_path('module', 'admin_menu'); unset($scripts['module'][$path . '/admin_menu.js']); $variables['scripts'] = drupal_get_js('header', $scripts); } // Similar process for CSS but there are 2 Css realted variables. // $variables['css'] and $variables['styles'] are both used. if (!empty($variables['css'])) { $path = drupal_get_path('module', 'admin_menu'); unset($css['all']['module'][$path . '/admin_menu.css']); unset($css['all']['module'][$path . '/admin_menu.color.css']); $variables['styles'] = drupal_get_css($css); } } } I need the jquery_update 1.3.2 to be unset on the node-types of 'blog' and 'video'. Can someone help me out? Thank you.

  Read the article

• How to add new object to an IList mapped as a one-to-many with NHibernate?

  - by Jørn Schou-Rode

  My model contains a class Section which has an ordered list of Statics that are part of this section. Leaving all the other properties out, the implementation of the model looks like this: public class Section { public virtual int Id { get; private set; } public virtual IList<Static> Statics { get; private set; } } public class Static { public virtual int Id { get; private set; } } In the database, the relationship is implemented as a one-to-many, where the table Static has a foreign key pointing to Section and an integer column Position to store its index position in the list it is part of. The mapping is done in Fluent NHibernate like this: public SectionMap() { Id(x => x.Id); HasMany(x => x.Statics).Cascade.All().LazyLoad() .AsList(x => x.WithColumn("Position")); } public StaticMap() { Id(x => x.Id); References(x => x.Section); } Now I am able to load existing Statics, and I am also able to update the details of those. However, I cannot seem to find a way to add new Statics to a Section, and have this change persisted to the database. I have tried several combinations of: mySection.Statics.Add(myStatic) session.Update(mySection) session.Save(myStatic) but the closest I have gotten (using the first two statements), is to an SQL exception reading: "Cannot insert the value NULL into column 'Position'". Clearly an INSERT is attempted here, but NHibernate does not seem to automatically append the index position to the SQL statement. What am I doing wrong? Am I missing something in my mappings? Do I need to expose the Position column as a property and assign a value to it myself? EDIT: Apparently everything works as expected, if I remove the NOT NULL constraint on the Static.Position column in the database. I guess NHibernate makes the insert and immediatly after updates the row with a Position value. While this is an anwers to the question, I am not sure if it is the best one. I would prefer the Position column to be not nullable, so I still hope there is some way to make NHibernate provide a value for that column directly in the INSERT statement. Thus, the question is still open. Any other solutions?

  Read the article

• how to design this relation in a DB schema

  - by raticulin

  I have a table Car in my db, one of the columns is purchaseDate. I want to be able to tag every car with a number of Policies (limited to 10 policies). Each policy has a time to life (ttl, a duration of time, like '5 years', '10 months' etc), that is, for how long since the car's purchaseDate the policy can be applied. I need to perform the following actions: when inserting a Car, it will be set with a number of Policies (at least one is set) sometimes a Car will be updated to add/remove a Policy searches must be done taking into account date/policies, for example: 'select all cars that are not covered by any policy as of today' My current design is (pol0..pol9 are the policies): CREATE TABLE Car ( id int NOT NULL IDENTITY(1,1), purchaseDate datetime NOT NULL, //more stuff... pol0 smallint default NULL, pol1 smallint default NULL, pol2 smallint default NULL, pol3 smallint default NULL, pol4 smallint default NULL, pol5 smallint default NULL, pol6 smallint default NULL, pol7 smallint default NULL, pol8 smallint default NULL, pol9 smallint default NULL, PRIMARY KEY (id) ) CREATE TABLE Policy ( id smallint NOT NULL, name varchar(50) collate Latin1_General_BIN NOT NULL, ttl varchar(100) collate Latin1_General_BIN NOT NULL, PRIMARY KEY (id) ) The problem I am facing is that the sql to perform the query above is a nightmare to write. As I don't know in which column each policy can be, so I have to check all columns for every policy etc etc. So I am wondering wether it is worth changing this. My questions are: The smallint as Policy id was chosen instead of an 'int IDENTITY' in order to save some space as there are going to be millions of Car records. It just adds complexity when creating a Policy as we must handle the id etc. Was it worth doing this? I am thinking that maybe there is a much better design? Obviously we could move the policy/car relation to its own table CarPolicy, benefits would be: no limit on 10 policies per car adding/removing etc much easier when only the default policy is applied (when no others are applied one called Default policy is applied), we could signal that by not having any entry in CarPolicy, now this is just done inserting the Default policy id in one of the columns. The cons are that we would need to change the DB, ORM classes etc. What would you recommend? Maybe there is another smart way to implement this that we are not aware without using the CarPolicy table?

  Read the article

• Check my anagram code from a job interview in the past.

  - by Michael Dorgan

  Had the following as an interview question a while ago and choked so bad on basic syntax that I failed to advance (once the adrenalin kicks in, coding goes out the window.) Given a list of string, return a list of sets of strings that are anagrams of the input set. i.e. "dog","god", "foo" should return {"dog","god"}. Afterward, I created the code on my own as a sanity check and it's been around now for a bit. I'd welcome input on it to see if I missed anything or if I could have done it much more efficiently. Take it as a chance to improve myself and learn other techniques: void Anagram::doWork(list input, list &output) { typedef list SortType; SortType sortedInput; // sort each string and pair it with the original for(list<string>::iterator i = input.begin(); i != input.end(); ++i) { string tempString(*i); std::sort(tempString.begin(), tempString.end()); sortedInput.push_back(make_pair(*i, tempString)); } // Now step through the new sorted list for(SortType::iterator i = sortedInput.begin(); i != sortedInput.end();) { set<string> newSet; // Assume (hope) we have a match and pre-add the first. newSet.insert(i->first); // Set the secondary iterator one past the outside to prevent // matching the original SortType::iterator j = i; ++j; while(j != sortedInput.end()) { if(i->second == j->second) { // If the string matches, add it to the set and remove it // so that future searches need not worry about it newSet.insert(j->first); j = sortedInput.erase(j); } else { // else, next element ++j; } } // If size is bigger than our original push, we have a match - save it to the output if(newSet.size() > 1) { output.push_back(newSet); } // erase this element and update the iterator i = sortedInput.erase(i); } }

  Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >