Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 566/848 | < Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >

  • Static routing on a TP-Link TL-WR1043ND

    - by igor
    My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

    Read the article

  • How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

    - by user26453
    I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

    Read the article

  • "Modern" Ethernet over coax

    - by Electrons_Ahoy
    So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

    Read the article

  • Hurricanes Since 1851 [Visualization]

    - by Jason Fitzpatrick
    Much like you can map out volcanic eruptions to create a neat pattern around the Pacific Ring of Fire, you can also map out hurricanes and tropical storms. Check out this high-resolution visualization to see the pattern formed by a century and a half of storms. Courtesy of UXBlog and data from the National Oceanic and Atmospheric Administration, the above projection shows the path of tropical storms around the equator (the perspective, if the map looks unfamiliar to you, is bottom up with Antarctica and the lower portion of South America in the center). For a full resolution copy of the image and more information about how it was rendered, hit up the link below. Hurricanes Since 1851 [via Cool Infographics] How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

    Read the article

  • Here’s a Quick Alternative Way to Download Videos from YouTube

    - by Taylor Gibb
    More than 24 hours of video content are uploaded to the internet per minute. With so many videos being uploaded, there’s no doubt you’ve come across a video you want to keep. Read on to find out how you can download your favorite videos for offline viewing. This method of downloading YouTube videos, is different, in the sense that you are just retrieving a buffered version of the video from your browsers cache. While you could always do this manually, different browsers store the cache in different places, a much easier method would be to head over to the NirSoft site and download a copy of Video Cache View (choose the zipped version), which allows you to view all the videos in your cache and supports all major browsers. Note: The download link is quite far down the page, see screenshot below How To Properly Scan a Photograph (And Get An Even Better Image) The HTG Guide to Hiding Your Data in a TrueCrypt Hidden Volume Make Your Own Windows 8 Start Button with Zero Memory Usage

    Read the article

  • How to diagnose disk errors when disk appears to be ok?

    - by Kylotan
    I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

    Read the article

  • How to diagnose disk errors when disk appears to be ok?

    - by Kylotan
    I have a six-month-old 1TB Seagate drive formatted into 2 NTFS partitions, and the disk appeared to be failing with Windows dropping down from UDMA to PIO mode, reporting Delayed Write Errors, and hanging Explorer when browsing directories. My initial suspicion was that the disk was dying. However, on further examination it appears that Ubuntu, which doesn't write to the volume frequently like Windows does, was able to read the disk properly and retrieve all the data intact, saving me from having to use an older backup. Finally, running the Seatools DOS diagnostic reported that the disk has no problems, ie. SMART errors and no bad sectors, apparently. This, in combination with the relative youth of the disk, suggests that something else is broken. The cable? The PSU? The integrated disk controller? But what would be a good way to diagnose the problem without risking damaging the data? I intend to extract the disk and try it in an external eSATA enclosure and see if the write errors cease, but in the event of the disk appearing to be fine, I would like to be able to confirm what part of the hardware is actually broken here in order to know just what needs replacing. Are there any good ways to go about this?

    Read the article

  • Never Call Me at Work [Humorous Star Wars Video]

    - by Asian Angel
    Have you ever had one of those days when someone close to you calls at the worst possible time? See what happens when this stormtrooper’s wife calls him while he is at work above Tatooine! Needless to say Darth Vader is in a “less than forgiving” mood… Never Call Me At Work [YouTube] Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Never Call Me at Work [Humorous Star Wars Video] Add an Image Properties Listing to the Context Menu in Chrome and Iron Add an Easy to View Notification Badge to Tabs in Firefox SpellBook Parks Bookmarklets in Chrome’s Context Menu Drag2Up Brings Multi-Source Drag and Drop Uploading to Firefox Enchanted Swing in the Forest Wallpaper

    Read the article

  • Put one monitor of a dual monitor windows system into standby

    - by Psycogeek
    Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

    Read the article

  • IE 11 Updates its Developers Tools

    - by Aligned
    Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/08/01/ie-11-updates-its-developers-tools.aspxI installed the IE 11 preview for Windows 7 (I’m getting upgraded to Windows 8 at work next week). I’ve never been a fan of the IE 8 – 10 developer tools so I’ve mostly been using Chrome or Firefox’s Firebug. This revamp looks great and seems to work well. I think I’ll be spending more time in IE with the developer tools, once IE 11 is released. “F12 Tools in Internet Explorer 11 Preview has been rebuilt from the ground up to give you: a new, cleaner user interface. new Responsiveness, Memory, and Emulation tools. new and improved functionality in familiar tools. an easier and faster workflow.” http://msdn.microsoft.com/en-us/library/ie/bg182632(v=vs.85).aspxhttp://ie.microsoft.com/testdrive/Browser/F12Adventure/ has a nice visual walk through of the new features.

    Read the article

  • "Software sources" crashes since unbuntu updated from 12.04 to 12.10

    - by Jean-Sebastien
    First of all, sorry for my English, I is not my native language. I recently updated my PC from ubuntu 12.04 to 12.10. Now “Software sources” crashes when I try to open it directly from Unity or from Ubuntu Software Center ? Software sources. When I try to open “Update manager”, I get the following error message. Note that the internet connection WROKS! W:Failed to fetch http://ppa.launchpad.net/rye/ubuntuone-extras/ubuntu/dists/quantal/main/source/Sources 404 Not Found, ... ... ... E:Some index files failed to download. They have been ignored, or old ones used instead. Please, can somebody help me on this? JS

    Read the article

  • Wifi will not connect with an Intel Wifi Link 1000

    - by Wallace Panter
    I have an HP dv7t-6100CTO laptop. I have linux ubuntu 12.04 lts dual booted. The specs of my laptop are: - i7-2620m dual core (2.7 ghz) processor - intel wifi link 1000 bgn wireless card I am having a hard time getting my laptop to connect to the internet through wireless. Ethernet is fine, but at college I need wireless the majority of the time. Can anyone help? Some steps I have done: I have tried WICD while uninstalling the Network Manager. When that didn't work, I uninstalled WICD and reinstalled Network Manager. I an not really sure what else to do.

    Read the article

  • Strange performance issue with Dell R7610 and LSI 2208 RAID controller

    - by GregC
    Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

    Read the article

  • WiLan porte plainte contre tous les constructeurs de portables et de mobiles, pour infraction de bre

    WiLan porte plainte contre tous les constructeurs de portables et de mobiles, pour infraction de brevet sur la technologie Bluetooth Une entreprise canadienne, fondée en 1992 et commercialisant des tehcnologies de réseau sans fil, a décidé de changer subitement d'activité il y a quelques années, alors qu'elle se rapprochait dangereusement du dépôt de bilan. Wi-Lan a donc recentré son activité sur "développement, protection et rentabilisation des inventions brevetées". D'après son site Internet, la compagnie possède plus de 800 inventions : soit faites-maison, soit rachetées, ou bien encore sous licence de tiers. Hier matin, Wi-Lan a fait une annonce des plus surprenantes. L'entreprise a porté plainte contre...

    Read the article

  • Why isn't SSL/TLS built into modern Operating Systems?

    - by Channel72
    A lot of the basic network protocols that make up the infrastructure of the Internet are built in to most major Operating Systems. Things like TCP, UDP, and DNS are all built into Linux, UNIX and Windows, and are made available to the programmer through low-level system APIs. But when it comes to SSL or TLS, one has to turn to a third-party library such as OpenSSL or Mozilla NSS. SSL is a relatively old protocol, and it's basically an industry standard as ubiquitous as TCP/IP, so why isn't it built into most Operating Systems?

    Read the article

  • Web security course ?

    - by vtortola
    I'd like to do a course about web security. I've seen some certifications that could be interesting: CIW Web Security Professional CISSP® - Certified Information Systems Security Professional Certified Secure Software Lifecycle Professional What do you know about these certifications? are they recognized? I'm not trying to become a hacker, I just want to ensure I have enough knowledge about web security to cope with today internet. From my inexpert point of view, "Certified Secure Software Lifecycle Professional" looks exactly as I want, the problem is that it cost more than 500 bucks! Why certification? well, I want to learn but I would like also have a way to demonstrate to a future employer/customer that I had to study and pass exams, not only attend to a course. Regards.

    Read the article

  • Errors while updating Ubuntu 13.10

    - by santiago
    When I execute the updater it always throws the same error saying: Failed to download repository information. Check your internet connection. And when I run the sudo apt-get update I get these lines at the end: W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead

    Read the article

  • JavaOne Afterglow by Simon Ritter

    - by JuergenKress
    Last week was the eighteenth JavaOne conference and I thought it would be a good idea to write up my thoughts about how things went. Firstly thanks to Yoshio Terada for the photos, I didn't bother bringing a camera with me so it's good to have some pictures to add to the words. Things kicked off full-throttle on Sunday.  We had the Java Champions and JUG leaders breakfast, which was a great way to meet up with a lot of familiar faces and start talking all things Java.  At midday the show really started with the Strategy and Technical Keynotes.  This was always going to be tougher job than some years because there was no big shiny ball to reveal to the audience.  With the Java EE 7 spec being finalised a few months ago and Java SE 8, Java ME 8 and JDK8 not due until the start of next year there was not going to be any big announcement.  I thought both keynotes worked really well each focusing on the things most important to Java developers: Strategy One of the things that is becoming more and more prominent in many companies marketing is the Internet of Things (IoT).  We've moved from the conventional desktop/laptop environment to much more mobile connected computing with smart phones and tablets.  The next wave of the internet is not just billions of people connected, but 10s or 100s of billions of devices connected to the network, all generating data and providing much more precise control of almost any process you can imagine.  This ties into the ideas of Big Data and Cloud Computing, but implementation is certainly not without its challenges.  As Peter Utzschneider explained it's about three Vs: Volume, Velocity and Value.  All these devices will create huge volumes of data at very high speed; to avoid being overloaded these devices will need some sort of processing capabilities that can filter the useful data from the redundant.  The raw data then needs to be turned into useful information that has value.  To make this happen will require applications on devices, at gateways and on the back-end servers, all very tightly integrated.  This is where Java plays a pivotal role, write once, run everywhere becomes essential, having nine million developers fluent in the language makes it the defacto lingua franca of IoT.  There will be lots more information on how this will become a reality, so watch this space. Technical How do we make the IoT a reality, technically?  Using the game of chess Mark Reinhold, with the help of people like John Ceccarelli, Jasper Potts and Richard Bair, showed what you could do.  Using Java EE on the back end, Java SE and JavaFX on the desktop and Java ME Embedded and JavaFX on devices they showed a complete end-to-end demo. This was really impressive, using 3D features from JavaFX 8 (that's included with JDK8) to make a 3D animated Duke chess board.  Jasper also unveiled the "DukePad" a home made tablet using a Raspberry Pi, touch screen and accelerometer. Although the Raspberry Pi doesn't have earth shattering CPU performance (about the same level as a mid 1990s Pentium), it does have really quite good GPU performance so the GUI works really well.  The plans are all open sourced and available here.  One small, but very significant announcement was that Java SE will now be included with the NOOB and Raspbian Linux distros provided by the Raspberry Pi foundation (these can be found here).  No more hassle having to download and install the JDK after you've flashed your SD card OS image.  The finale was the Raspberry Pi powered chess playing robot.  Really very, very cool.  I talked to Jasper about this and he told me each of the chess pieces had been 3D printed and then he had to use acetone to give them a glossy finish (not sure what his wife thought of him spending hours in the kitchen in a gas mask!)  The way the robot arm worked was very impressive as it did not have any positioning data (like a potentiometer connected to each motor), but relied purely on carefully calibrated timings to get the arm to the right place.  Having done things like this myself in the past I know how easy it is to find a small error gets magnified into very big mistakes. Here's some pictures from the keynote: The "Dukepad" architecture Nice clear perspex case so you can see the innards. The very nice 3D chess set.  Maya's obviously a great tool. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Simon Ritter,Java One,OOW,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Wubi without downloading ubuntu-12.04.1-wubi-i386.tar.xz

    - by kaveh
    I have a class of computational physics. I want to install Ubuntu on 24 systems. unfortunately our access to Internet is limited. On the other hand I do not like to make new partitions for Linux. So I have to use Wubi but Wubi needs a large file .i.e. "ubuntu-12.04.1-wubi-i386.tar.xz". Unfortunately I could not make a trick to Wubi because when I put "ubuntu-12.04.1-wubi-i386.tar.xz" manually in the ubuntu/disks directory, wubi starts to complain about the existence of already installed ubuntu and all thing should be done from scratch. Does anybody know a solution for this problem? Thanks

    Read the article

  • Single player game into Multiplayer game

    - by jeyanthinath
    I developed a Single player game in Flash (Tic Tac Toe) and in the Multiplayer mode i will be able to do both player playing on the same system with out network. I would like to extend it and make it enable to play the Multiplayer game for two player playing it online. How i can be made give me some ideas , How test the Multiplayer game playing along with different computers(I do not have internet connection in home). How I able to change the single player game into Multiplayer game , any minor changes required or I have to change the code base completely. In which way i can make it possible.

    Read the article

  • Network cabling with multiple patch panels?

    - by dannymcc
    I am in the very early stages of planning a network cabling upgrade in our office, mainly to upgrade the old cables from Cat5 to either 5e or 6. I am also planning on upgrading all of our 10/100 switches to 10/100/1000 switches. I would like to have three small wall mounted cabinets spread around the building, each with a patch panel and switch. These would all lead back to our server room. The question is; should I have two patch panels in each wall cabinet, one with 24 or 48 ports that are connected to a matching patch panel in the server room. The second patch panel would then link to each device in that cabinets area. Then I wouldn't put a switch in the small cabinets. All switching would be done in the server room. Or, should I have one main cable from the server room to each of the cabinets - plugged straight into the switch and the patch panel is for devices in the cabinets area? I hope that makes sense!

    Read the article

  • Powershell STA watin

    - by Mike Koerner
    Wow, two posts on the same day. I was working on a quick DLL project to do some web scripting using the awsome power of Watin.  In the past I use to create a vbscript as the test handler to call the DLL but lately I got a Powershell bug to call .NET DLLs. When I tried to debug the Watin call I received: The CurrentThread needs to have it's ApartmentState set to ApartmentState.STA to be able to automate Internet Explorer. I couldn't find a quick google answer to powershell apartmentstate .  Apparently you can set the powershell apartment state by the command line -STA.  http://technet.microsoft.com/en-us/library/dd315276.aspx I've found that the powershell documentation and examples is lacking compared to the Microsoft support I've come to expect.  Why is the Powershell v2.0 in C:\WINDOWS\SYSTEM32\windowspowershell\v1.0 ?

    Read the article

  • Linux Kernel Packet Forwarding Performance

    - by Bob Somers
    I've been using a Linux box as a router for some time now. Nothing too fancy, just enabling forwarding in the kernel, turning on masquerading, and setting up iptables to poke a few holes in the firewall. Recently a friend of mine pointed out a performance problem. Single TCP connections seem to experience very poor performance. You have to open multiple parallel TCP connections to get decent speed. For example, I have a 10 Mbit internet connection. When I download a file from a known-fast source using something like the DownThemAll! extension for Firefox (which opens multiple parallel TCP connections) I can get it to max out my downstream bandwidth at around 1 MB/s. However, when I download the same file using the built-in download manager in Firefox (uses only a single TCP connection) it starts fast and the speed tanks until it tops out around 100 KB/s to 350 KB/s. I've checked the internal network and it doesn't seem to have any problems. Everything goes through a 100 Mbit switch. I've also run iperf both internally (from the router to my desktop) and externally (from my desktop to a Linux box I own out on the net) and haven't seen any problems. It tops out around 1 MB/s like it should. Speedtest.net also reports 10 Mbits speeds. The load on the Linux machine is around 0.00, 0.00, 0.00 all the time, and it's got plenty of free RAM. It's an older laptop with a Pentium M 1.6 GHz processor and 1 GB of RAM. The internal network is connected to the built in Intel NIC and the cable modem is connected to a Netgear FA511 32-bit PCMCIA network card. I think the problem is with the packet forwarding in the router, but I honestly am not sure where the problem could be. Is there anything that would substantially slow down a single TCP stream?

    Read the article

  • Computer speakers receive radio station signal

    - by squircle
    I have a set of Logitech 5.1 speakers where each speaker and the source plug into the subwoofer. I'm using a Griffin Firewave with output from my MacBook Pro, and output from my custom-built desktop with a switch in the middle (built it myself out of an old Belkin A/B parallel switch). Recently, I've noticed that I can hear a local Punjabi radio station being picked up by my speakers, and the volume of this interference increases as I increase the volume of the speakers. I'm fairly sure that this radio station is at the low-end of the FM spectrum, below 90MHz (or it may be at the high end, above 105MHz, my memory isn't infallible). It gets quite annoying as I can't put my audio very loud without the interference. I've tried to put a ferrite core on the input cable just before the 3.5mm jacks plug into the subwoofer. I don't know if putting the same core around all three of the cables (green, black, orange) would negate the effects, but I'm assuming not. There has been no change. Is there any reason why this would be happening? I'm assuming the interference is coming somewhere between the FireWave and the subwoofer, because the noise gets amplified with volume increases. If anybody has any suggestions, I'd be grateful!

    Read the article

  • Screen brightness control not working on Lenovo T530

    - by Matt
    My brightness control doesn't work with a fresh install of 12.10 (brand new laptop). It is set to the brightest setting when I boot up and when I try to change it, I see the notification bar come up but the brightness doesn't actually change. I've tried all the solutions I could find around the Internet but none of them work. Things I have tried include: Editing /sys/class/backlight/acpi_video0/brightness In /usr/share/X11/xorg.conf.d/10-brightness-control.conf: Option "RegistryDwords" "EnableBrightnessControl=1" In /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" There is no xorg.conf file in 12.10 that I have found, so the solutions that suggest editing that file don't do me a whole lot of good. I am currently using the Nouveau driver, but switching to the Nvidia proprietary drivers made no difference. Any other ideas? When is this bug going to be fixed? With all the reports I've come across I would think it would get a lot of attention. Thanks.

    Read the article

< Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >