Search Results

Search found 3084 results on 124 pages for 'lan'.

Page 67/124 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Looking for a software solution which acts like a hardware KVM

  - by Daisetsu

  I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• iptables: matching multiple ip addresses

  - by Tax

  Hi guys, I am working on a iptables rule to apply after my shorewall script has initialized my firewall. I want a spicific IP (10.0.1.19) address in my lan to be redirected to 10.0.64.1 except if it is going to paypal. I have the following rule, and that works like a charm iptables -t nat -A PREROUTING ! -d 1.2.3.4 -s 10.0.1.19 -j DNAT --to 10.0.64.1 My problem is that paypal uses multiple ip addresses, and I am not allowed to have multiple IP-addresses. https://ppmts.custhelp.com/cgi-bin/ppdts.cfg/php/enduser/std%5Fadp.php?p%5Ffaqid=92 On top of this problem I would like to know how to remove the rule again, without having to restart shorewall. Kind regards Tax

  Read the article

• Connect work laptop (domain) to home workgroup

  - by jjeaton

  Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

  Read the article

• TightVNC grey screen?

  - by gary

  I'm trying to help my mom remotely with some PC problems. She's not too computer savvy, so to keep the firewall stuff on my side of things, I tried to use a reverse VNC connection: On my machine, I set up TightVNC client in listening mode. I also opened TCP port 5500 on my router and firewall, and checked it using http://canyouseeme.org/. On her machine, I (instructed her to) set up TightVNC server, and connect to my machine's IP ('Add New Client...'). Both machines run Windows XP & TightVNC 1.3.10. The problem: When she tries to connect, a TightVNC window with grey background pops up on my machine, but I never get to see the remote desktop. It just remains grey. However, it seems that I control the mouse on the remote side (she says it's moving). I tried to reverse-connect from another machine on my LAN and it works without a problem. Any idea what the problem could be?

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• How to get started with tcp/ip v6?

  - by Johan

  Hi Now and then there is "news" about that the ip numbers will run out in X years, and we must change to tcp/ip v6... And even thou this crisis never really happens it has waken a question, how do you get started with tcp/ip v6? What can I do at home and is this a good or bad idea? Can you use IPv4 and IPv6 in the same cables in the same LAN, or do you need to physically separate them? Can you have some translation box so you can reach the "normal" internet from the IPv6 connected devices? (Just like a NAT-Router) Can someone please clarify the situation a little bit? Thanks Johan

  Read the article

• Getting out of the Helpdesk. Getting into the system administration.

  - by eric.s

  Today I found out that the job which would have been a promotion for me went to an outside candidate. The position is for a systems admin on our LAN team. I have been working on the helpdesk here for almost two years with another two years experience working it prior. While we are the first tier support we also work in AD, monitor and update certain servers and set up and deploy Windows/Mac images for those we support. What I am looking for here is what can I do to better myself to inside/outside places to move up this ladder? I take what I can from my job - working on projects that I can learn from - but what projects should I be volunteering for? What can I do for myself outside to make me a more viable candidate for a systems admin?

  Read the article

• TightVNC (or any VNC) viewer windows scaling

  - by mr.b

  Hi, I am currently using TightVNC to connect to multiple remote hosts in LAN. I start 16 VNC viewers, set Scaling by: Auto (in connection options display), and then select all viewer windows and use Tile Horizontally, which covers my entire screen with VNC viewers. It all works sort of nice, except that desktop interaction is really slow when there are more then 4 VNC viewers. My question is, does VNC client (not just TightVNC, but any compatible client) support some kind of smart scaling option, so that client tells server something along the lines of: "Okay, I'm displaying your entire screen in a window size 300x225 px, so can you please start sending encoded images on that resolution?", at which point interactiveness of open connections dramatically increase, and when I decide to go full screen on some connection, client and server re-negotiate and server starts sending full resolution images again? Thanks!!

  Read the article

• solaris + dladm + what is unknown state and how to bring it to up?

  - by yael

  I installed Solaris 10 on my netra machine from dladm show-dev I can see which interface are down or up all interfaces are connected to the Cisco switch , and all leds are light's on all LAN cards but I not understand why all interfaces except e1000g0 are in unknown ? Please advice how to bring the unknown interfaces to up ? # dladm show-dev e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 link: unknown speed: 0 Mbps duplex: unknown e1000g2 link: unknown speed: 0 Mbps duplex: unknown e1000g3 link: unknown speed: 0 Mbps duplex: unknown nxge0 link: unknown speed: 0 Mbps duplex: unknown nxge1 link: unknown speed: 0 Mbps duplex: unknown nxge2 link: unknown speed: 0 Mbps duplex: unknown nxge3 link: unknown speed: 0 Mbps duplex: unknown

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• Edimax wireless router is not providing DNS services correctly

  - by Nathan Fellman

  I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

  Read the article

• Is it possible to redirect/bounce TCP traffic to external destination, base on rules?

  - by xfx

  I'm not even sure if this is possible... Also, please forgive my ignorance on the subject. What I'm looking for is for "something" that would allow me to redirect all TCP traffic arriving to host A to host B, but based on some rules. Say host A (the intermediary) receives a request (say a simple HTTP request) from a host with domain X. In that case, it lets it pass through and it's handled by host A itself. Now, let's suppose that host A receives another HTTP request from a host with domain Y, but this time, due to some customizable rules, host A redirects all the traffic to host B, and host B is able to handle it as if came directly from domain Y. And, at this point, both host B and the host with domain Y are able to freely communicate (of course, thought host A). NOTE: All these hosts are on the Internet, not inside a LAN. Please, let me know if the explanation is not clear enough.

  Read the article

• CentOS 6.5 as WebServer for Django Dev

  - by Charlesliam

  During CentOS 6.5 Installation I choose WebServer type for this computer. The server has a static IP address 192.168.111.100. The CentOS was updated I managed to install virtualenv with Python 2.7. Within the virtualenv, I'll be using Django Framework. After I tried to run the command using root user python manage.py runserver 0.0.0.0:8000 I can't see the website from other computer within the LAN when I try to type 192.168.111.100:8000/admin on my browser. I already disable firewall using service iptables stop I can ping the 192.168.111.100 and I have a good feedback with nslookup. What seems the problem of my config?

  Read the article

• How do ring and bus network connect to router?

  - by lantopology

  Sorry this is probably a very silly question, but for some reason i am confused. How does a LAN with bus or ring topology connect to a router and other LANs? For example in a star network they all connect to a switch which can then connect to a router, but where does a switch go and fit in a bus or ring topology? In this image of a ring network there is no switch: http://www.brainbell.com/tutorials/Networking/images/01fig04.gif would the switch in the ring network simply be placed alongside the other nodes? Thank you very much

  Read the article

• internet connection drops randomly

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. The connection doesn't always drop on all three PC's at the same time. Anyone got any idea besides re-installing OS? thanks

  Read the article

• Driver choice for addressing ubuntu wireless card issues

  - by Holly

  Hello, this should be a relatively simple question. I'm attempting to get my windows wireless card to work with ubuntu, booted from my portable hard drive. This is the guide I'm attempting to follow is on help.ubuntu.com, /community/WifiDocs/Driver/Ndiswrapper My wireless card is a Broadcom Corporation BCM4318 AirForce One 54g 802.11g Wireless LAN Controller. My computer is an HP Pavilion Entertainment dv5 notebook, which came with Vista 64. I would like confirmation about which of the drivers I should use. At this point, I'm leaning towards Broadcom BCM4318 HP Pavilion zv6000, but I thought it best to ask advice before taking action. The drivers I have to chose from are listed on this page http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=Category:Broadcom Thanks! Holly

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• internet connection problem related to a recurring registry error

  - by mats

  I have a Windows XP desktop system connected to the Internet via ethernet LAN. Initially, none of my browsers were connecting to the Internet, but I was able to update my antivirus software and all of my connection settings were perfect. I was able to solve the problem by running WinSock XP, which apparently fixes connection problems that have been caused by registry issues. My problem now is that every time I shut down the machine, the problem comes back (Internet browsers won't connect). Does anyone have any ideas/suggestions on this? Thanks

  Read the article

• Recommended Configuration to setup Tomcat 7 on windows OS

  - by yashbinani

  I have created a small web application using java/jee which will be deployed in LAN environment. I want to know the recommended hardware configuration. Details are as follows 1) Expected number of hits: 20 hits / hour 2) Number of clients 5-7 3) Application Server : Tomcat 7 4) Database server : MySql App and DB shall be deployed on same machine 5) OS Configuration : Windows XP or any unix flavour ? Can a simple p4/celeron machine with 1 gb ram 8-10 GB hard disk will be sufficient to cater client requests? Server will not be storing too many files/images/videos Client does not want to spend too much on infrastructure.

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Taskbar Network "Repair" menu option gone in Windows 7

  - by JohnB

  I used to LOVE that feature in Windows XP! Just right-clicked on the WiFi icon on the Taskbar (lower right-hand corner), then Repair. It doesn't take that long, and it usually helped me since I constantly go back and forth between LAN at work, VPN on WiFi from work and home, and also VPN to my own personal server. Even if you didn't need to refresh, doing so never hurts! Unfortunately, the feature seems to be removed from Win7 :( Now you can check for problems, but it only does the refresh if it thinks it needs too, and the whole process tasks so darn long! Is there a way to Repair my WiFi connection quickly and easily on Win7?

  Read the article

• How to enable Hardware-assisted decoding in Ubuntu 9.10, specifically for Totem and/or Gnome MPlayer

  - by techtechmo

  Hi all, just wanted to ask about Hardware-assisted 720p video playback on an Intel Atom D510 machine, running on Ubuntu 9.10 Karmic Koala. When I use Boxee with Hardware Assisted Decoding activated, I am able to play 720p videos -- whether on the local harddisk drive or on a remote server, through LAN. However when I play the same 720p videos through Totem or through Gnome MPlayer, the resulting playback suffers from stuttering and slideshow-like slowdowns. Would it be possible to make 720p video playback on Totem and Gnome MPlayer more smooth given that my machine's processor in the Intel Atom D510? If yes, how? Boxee seems to manage, so I assume it should also be possible to tweak Totem and/or Gnome MPlayer to be able to do the same. As an added note, I the machine's OS is Linux Mint 8. Installed RAM is 2GB.

  Read the article

• Remote Desktop not following display settings

  - by John

  I have my RDP client set up to use highest settings for connecting to another PC on my LAN, which has display settings 1280x1024x32bit. RDP is specifically set to use 32bit depth, but when I connect it drops to 16bit. The PC I connect to is (amongst other things) used to do some 3D graphics. I don't expect great performance, just to check it works... but it doesn't over RDP, the 3D app doesn't think the hardware is the same. Does RDP's integration with Windows mean it is providing some virtualised rendering system? Should I use something less 'clever' like VNC, to literally screen-grab the contents of the screen without altering the settings?

  Read the article

• How to access web server of any machine of my network from the outside

  - by Luc

  Hello, I have an ip like username.dyndns.org, this is the external IP of my router. On my lan, I have several machine (m1, m2, ...) , each running a dedicated web server. Is it possible to reach each machine from the outside with something like: http://m1.username.dyndns.org http://m2.username.dyndns.org ? Do you know what needs to be configured in my router for NAT ? Also, is there a special directive in Apache to do so ? Thanks a lot, Regards, Luc

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >