Search Results

Search found 24766 results on 991 pages for 'information retrieval'.

Page 769/991 | < Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• RTL8188CE doesn't connect to any wifi access points

  - by Drakmail

  I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• Group Policy - Published software not upgrading

  - by VokinLoksar

  I'm testing this with mercurial MSIs, but it's the same for other packages. I've created a new group policy and added an old version of mercurial to User software installation as a Published package. On a Windows 7 client I install the package through Programs and Features. The installation works fine. Now, I would like to publish an updated version of mercurial. I create a new Published package. Under 'Upgrades' I configure it to replace (upgrade also doesn't work) the old version and mark this upgrade as 'Required'. The old package is not removed. The Windows 7 client is then restarted. When I log back in, I see a status message saying something like 'Removing managed software Mercurial ...'. There is no message about installation of the upgrade. If I look in Programs and Features, I can see the new version of mercurial listed. However, the actual mercurial directory under Program Files is missing. It's as though the installation recorded information about the MSI, but didn't actually install anything after removing the old version. As I mentioned, this isn't specific to mercurial. I've tried using other apps and have yet to find one that can be upgraded via a Published package. Using Assigned packages in Computer Configuration works without problems, but I would like this software to be optional rather than required. Ideas?

  Read the article

• INSERT DELAYED on locked tables blocks PHP processes to continue

  - by sw0x2A

  Our webservers write some tracking information into a MySQL database (using INSERT DELAYED into MyISAM table). When a huge SELECT query is executed on this table or when it is locked for another reason, the webserver processes (with INSERT DELAYED) are waiting for the database and in some cases the MaxServer limit is reached in Apaches, so they will stop serving requests. We use INSERT DELAYED because The DELAYED option for the INSERT statement is a MySQL extension to standard SQL that is very useful if you have clients that cannot or need not wait for the INSERT to complete. This is a common situation when you use MySQL for logging and you also periodically run SELECT and UPDATE statements that take a long time to complete. Quote from MySQL documentation. I am wondering why the Apache processes are waiting for the INSERT DELAYED to finish. And what can I do to just send the data and forget about it. (Since this is logging data, I do not care if we lose some entries.) Even when the table is locked the PHP script should just go on and should not wait for an answer of MySQL. (We do not want to setup Master-slave for this table but we are thinking about move this data to some NoSQL database. But for now I would like to know why INSERT DELAYED is not working as expected.)

  Read the article

• Subdomain is preventing my search results from rising as expected in page rank

  - by culov

  My problem is that I have a site which has requires a dedicated page for every city I choose to support. Early on, I decided to use subdomains rather than a directly after my domain (ie i used la.truxmap.com rather than truxmap.com/la). I realize now that this was a major mistake because Google seems to treat la.truxmap.com as a completely different site as ny.truxmap.com. So for instance, if i search "la food truck map" my site will be near the top, however, if i search "nyc food truck map" im no where in sight because ny.truxmap.com wouldnt be very high in the page rank by itself, and it doesnt have the boost that it ought to be getting from the better known la.truxmap.com So a mistake I made a year ago is now haunting my page rank. I'd like to know what the most painless way of resolving my dilemma might be. I have received so much press at la.truxmap.com that I can't just kill the site, but could I re-direct all requests at la.truxmap.com to truxmap.com/la and do the same for all cities supported without trashing my current, satisfactory page rank results I'm getting from la.truxmap.com ?? EDIT I left out some critical information. I am using Google Apps to manage my domain (that is, to add the subdomains) and Google App Engine to host my site. Thus, Google Apps provides a simple mechanism to mask truxmap.appspot.com (the app engine domain) as la.truxmap.com, but I don't see how I can mask it as truxmap.com/la. If I can get this done, then I can just 301 redirect la.truxmap.com to truxmap.com/la as suggested below. Thanks so much!

  Read the article

• What is the fall off of subsecond throughput on Ethernet Network Interfaces

  - by Kyle Brandt

  On a network interface, speeds are given in term of data over time, in particular, they are bits per second. However, in the uber-fast world of computing -- a second is kind of a really long time. So for example, given a linear falloff. A 1 GBit per second interface would do 500MBit per half second, 250Mbit per quarter second etc. I imagine at certain units of time, this is no longer linear. Perhaps this is set by ethernet frequencies, system clock speeds, interrupt timers etc. I am sure this varies depending on the system -- but does anyone have more information or whitepapers on this? One of the main reasons I am curious is to understand output drops on interfaces. Even if the speed per second is much lower than the interface can handle -- perhaps there are spikes that cause drops for only small numbers of milliseconds. Perhaps various coalescing would hide this effect -- or perhaps increase it on the receiving interface? Do queues make a difference here? Example: So given if this is linear down to the MS we would have 1Mbit/MS, and if Wireshark isn't distorting what I see, should I see drops when I have a spike beyond 1Mbit?

  Read the article

• can't register a soft phone to asterisk11

  - by Tom

  I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

  Read the article

• XFS: No space left on device

  - by beketa

  I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

• Virtualhost one https site, the rest http

  - by RJP1

  I have a linode server with Apache2 running a handful of sites with virtualhosting. All sites work fine on port 80, but one site has a ssl certificate and also runs okay. My problem is as follows: The non-https sites, if visiting https://domain.com - show the contents of the only secure site... Is there a way of disabling the *:443 match for these non-secure sites? Thanks! EDIT (more information): Here's a typical config in sites-available for a normal insecure http site: <VirtualHost *:80> ServerName www.insecure.com ServerAlias insecure.com ... </VirtualHost> The secure https site is as follows: <VirtualHost *:80> ServerName www.secure.com Redirect permanent / https://secure.com/ </VirtualHost> <VirtualHost *:80> ServerName secure.com RedirectMatch permanent ^/(.*) https://secure.com/$1 </VirtualHost> <VirtualHost *:443> SSLEngine on SSLProtocol all SSLCertificateChainFile ... SSLCertificateFile ... SSLCertificateKeyFile ... SSLCACertificateFile ... ServerName secure.com ServerAlias secure.com ... </VirtualHost> So, visiting: http:/insecure.com - works http:/www.insecure.com - works http:/secure.com - redirects to https:/secure.com - works http:/www.secure.com - redirects to https:/secure.com - works https:/insecure.com - shows https:/secure.com - WRONG!

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• How to script GPO in Windows computers without Active Directory?

  - by Peteris Krumins

  Does anyone know how to script GPO for users in a Windows computer that is not on any Active Directory network? I can't use GPMC because it doesn't work without a domain. I have been searching the net for the last couple of hours and all the solutions that I find are related to GPMC. I'd imagine there are some objects in the GPO that are accessible via WMI? Does anyone know anything about that? I was unable to find any information about that. Here is the situation I am trying to script: I have 10 users on the machine, and I want to restrict what they are able to do on the machine. So I created 10 GPOs for each one of them. Now I want to apply a common policy to all of them. The only way to do it is to go through each of the GPO and do it manually. This is too time consuming, therefore I am seeking for a simpler solution. I was unable to find a way to copy GPO from a user to a user. That would make it much easier, I would create a GPO for 1st user, then copy it over to all the other users, but no luck, couldn't find a way to copy GPOs. The other method I tried was creating a GPO for the whole user group but it turns out you can't apply GPO to a group unless you use GPMC, which I can't cause the computer is not on any domain. So I am thinking about scripting this whole process, but again I can't find any examples of how to access particular GPO objects for particular users and modify properties through WMI. Any suggestions on the issue I am having? Thanks!

  Read the article

• Google Chrome won't install via IE9/Windows7

  - by purir

  Using IE9, I've tried installing Google Chrome on Windows 7 from this url http://www.google.com/chrome/eula.html?hl=en-GB&platform=win But get the following error (apologies for uncouthly dumping this nonsense...) Any ideas dearly appreciated! PLATFORM VERSION INFO Windows : 6.1.7601.65536 (Win32NT) Common Language Runtime : 4.0.30319.235 System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100) clr.dll : 4.0.30319.235 (RTMGDR.030319-2300) dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100) dfshim.dll : 4.0.31106.0 (Main.031106-0000) SOURCES Deployment url : _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser resulted in exception. Following failure messages were detected: + The system cannot find the file specified. (Exception from HRESULT: 0x80070002) COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [25/06/2011 11:41:04] : Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser has started. ERROR DETAILS Following errors were detected during this operation. * [25/06/2011 11:41:04] System.IO.FileNotFoundException - The system cannot find the file specified. (Exception from HRESULT: 0x80070002) - Source: System.Deployment - Stack trace: at System.Deployment.Internal.Isolation.IsolationInterop.GetUserStore(UInt32 Flags, IntPtr hToken, Guid& riid) at System.Deployment.Application.ComponentStore..ctor(ComponentStoreType storeType, SubscriptionStore subStore) at System.Deployment.Application.SubscriptionStore..ctor(String deployPath, String tempPath, ComponentStoreType storeType) at System.Deployment.Application.SubscriptionStore.get_CurrentUser() at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS No transaction information is available.

  Read the article

• Zabbix doesn't update value from file neither with log[] nor with vfs.file.regexp[] item

  - by tymik

  I am using Zabbix 2.2. I have a very specific environment, where I have to generate desired data to file via script, then upload that file to ftp from host and download it to Zabbix server from ftp. After file is downloaded, I check it with log[] and vfs.file.regexp[] items. I use these items as below: log[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,"all",\1] vfs.file.regexp[/path/to/file.txt,"C.*\s([0-9]+\.[0-9])$",Windows-1250,,,\1] The line I am parsing looks like below: C: 8195Mb 5879Mb 2316Mb 28.2 The value I want to extract is 28.2 at the end of file. The problem I am currently trying to solve is that when I update the file (upload from host to ftp, then download from ftp to Zabbix server), the value does not update. I was trying only log[] at start, but I suspect, that log[] treat the file as real log file and doesn't check the same lines (althought, following the documentation, it should with "all" value), so I added vfs.file.regexp[] item too. The log[] has received a value in past, but it doesn't update. The vfs.file.regexp[] hasn't received any value so far. file.txt has got reuploaded and redownloaded several times and situation doesn't change. It seems that log[] reads only new lines in the file, it doesn't check lines already caught if there are any changes. The zabbix_agentd.log file doesn't report any problem with access to file, nor with regexp construction (it did report "unsupported" for log[] key, when I had something set up wrong). I use debug logging level for agent - I haven't found any interesting info about that problem. I have no idea what I might be doing wrong or what I do not know about how Zabbix is performing these checks. I see 2 solutions for that: adding more lines to the file instead of making new one or making new files and check them with logrt[], but those doesn't satisfy my desires. Any help is greatly appreciated. Of course I will provide additional information, if requested - for now I don't know what else might be useful.

  Read the article

• How do I get Tomcat 7 to start up faster in Linux CentOS kernel version 2.6.18?

  - by user1786833

  I am experiencing a problem with slow start up times for Tomcat 7. I have done some testing by tweaking configuration parameters both on Linux CentOS kernel version 2.6.18 and on Windows 7 using this link as my primary guide: http://wiki.apache.org/tomcat/HowTo/FasterStartUp and managed only a modest improvement. The improvements seemed to result when I added metadata-complete="true" attribute to the element of my WEB-INF/web.xml file and when I added the names of almost all the jars we use for our application to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in conf/catalina.properties file. I've also used this JAVA_OPTS in the setenv.sh file: JAVA_OPTS="$JAVA_OPTS -server -Xms1536m -Xmx1536m -XX:MaxPermSize=256m -XX:NewRatio=2 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Dorg.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true " but actually saw my start up times increase slightly. Our QA and production environments are on Linux CentOS so I'm hoping to get more information on improving Tomcat 7 start up times in that environment. My primary role is java developer and I don't have much system administration experience so I appreciate any input. Thank you for your time and suggestions.

  Read the article

• What is the typical maximum number of database connections for Oracle running on Windows server ?

  - by Sake

  We are maintaining a database server that serve a large number of clients. Each client typically running serveral client-applications. The total number of connections to the database server (Oracle 9i) is reaching 800 connections on peak load. The windows 2003 server is starting to run out of memory. We are now planning to move to 64bit Windows in order to gain higher memory capability. As a developer I suggest moving to multi-tier architecture with conneciton pooling, which I believe is a natural solution to this problem. However, in order to support my idea, I want the information on: what exactly is the typical number of connections allowed for Oracle database ? What is the problem when the number connections is too high ? Too much memory comsumption ? or too many sockets opened ? or too many context switching between threads ? To be a little bit specific, how could Oracle Forms application scale to thousand of users without facing this problem ? Shall Oracle RAC applied to this case ? I'm sure the answer to this question should depend on quite a number of factors, like the exact spec of the hardware being used. I'm expecting a rough estimation or some experience from the real world.

  Read the article

• Windows module installer delaying login, server 2008 R2

  - by Kyle

  We updated our servers this weekend (windows updates), everything went fine except one of our terminal servers now hangs at login with the message, "waiting for windows modules installer." It eventually times out and leaves an event log message that the service has stopped unexpectedly. I have disabled the service and users can now login in a reasonable time frame. However we will need to re-enable the service in order to install further updates. I'm not sure where to start with this one, I'm an entry level admin and my colleagues are on vacation today, thank God this isn't a serious problem. Further details: -It affects all users. -The only third party software on the server is our ERP software and screwdrivers from Tricerat. -The only event log message is that the service has stopped unexpectedly. -The server manager screen does not display any information about roles it just says, "error". -The remote desktop roles all seem to be functioning properly, Remote app works as well as standard RDP. Let me know if there is any further details I can provide, I will be checking this frequently throughout the day.

  Read the article

• Nexenta, NFS and LOCK_EX

  - by Givre

  I'm currently using an LAMP architecture and I expect a big problem :( I have several http web server using PHP5. All are mounting via NFS (v3) the directory for all the hosted websites. The file server is running the Nexenta Storage Appliance using ZFS . The problem is all the NFS client trying to write something in a file over the NFS get this problem : This is inside the apache2 process: open("/nfs/website1/file.txt", ORDWR|OCREAT, 0600) = 11647 fstat(11647, {stmode=SIFREG|0600, st_size=23754, ...}) = 0 flock(11647, LOCK_EX And the process never get the LOCK and keep waiting for... always. The effect? All the apache2 procces get used and waiting.. my severs can't still proccess the others requests because there is no more proccess available. I don't now where to find a solution.. for me it.'s on the NFS server side.. but wich configuration is wrong or missing ? How can I find what is wrong? If you need more information about the configuration, just ask me what can help you more :)

  Read the article

• Multiple SSL certificates on Apache using multiple public IPs - not working

  - by St. Even

  I need configure multiple SSL certificates on a single Apache server. I already know that I need multiple external IP addresses as I cannot use SNI (only running Apache 2.2.3 on this server). I assumed that I had everything configured correctly, unfortunately things are not working as they should (or maybe I should say, as I expected them to work)... In my httpd.conf I have: NameVirtualHost *:80 NameVirtualHost *:443 Lets say my public IP is 12.0.0.1 and my private IP is 192.168.0.1. When I use the public IP in my vhost my default website is being shown instead the one defined in my vhost, e.g.: <VirtualHost 12.0.0.1:443> ServerAdmin [email protected] ServerName blablabla.site.com DocumentRoot /data/sites/blablabla.site.com ErrorLog /data/sites/blablabla.site.com-error.log #CustomLog /data/sites/blablabla.site.com-access.log common SSLEngine On SSLCertificateFile /etc/httpd/conf/ssl/blablabla.site.com.crt SSLCertificateKeyFile /etc/httpd/conf/ssl/blablabla.site.com.key SSLCertificateChainFile /etc/httpd/conf/ssl/blablabla.site.com.ca-bundle <Location /> SSLRequireSSL On SSLVerifyDepth 1 SSLOptions +StdEnvVars +StrictRequire </Location> </VirtualHost> When I use the private IP in my vhost everything works as it should (the website defined in my vhost is being shown), e.g.: <VirtualHost 192.168.0.1:443> ...same as above... </VirtualHost> My server is listening on all interfaces: [root@grbictwebp02 httpd]# netstat -tulpn | grep :443 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 5585/httpd What am I doing wrong? If I cannot get this to work I cannot continue to add the second SSL certificate on the other public IP... If more information is required just let me know!

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• PassEnv does not find ENV variables

  - by quodlibetor

  I've got this /etc/profile.d/myfile.sh: export MYVAR=myval I also have a PassEnv MYVAR line in a <virtualhost> section of an apache conf dir. That lets me do things like: $ echo $MYVAR myval $ python >>> import os; os.getenv('MYVAR') 'myval' $ sudo echo $MYVAR myval $ sudo -i root# echo $MYVAR myval But then, despite that being the case I get: root# /sbin/service httpd restart /sbin/service httpd restart Stopping httpd: [ OK ] Starting httpd: [Mon Oct 22 14:44:02 2012] [warn] PassEnv variable MYVAR was undefined [ OK ] And all of my attempts to access MYVAR from within my wsgi scripts just don't work. Thoughts? Am I doing something obviously wrong? EDIT for more detail I've got a swarm of computers/VMs and a swarm of developers working on a swarm of projects. I need a simple central place to keep environment information, the most common is the "environment" (dev/stage/prod). The scheme that we've got (modifying *.wsgi programmatically) is turning out to be more fragile than we'd like. The main options that I see are: put things in the shell environment put things in other config files Getting things into the shell environment is the best, because we won't need to write yet more duplicated "what is my environment" code.

  Read the article

• Recieving a 500 Internal Server error after login success?

  - by Jeremy Quick

  I created my first member login form which takes the typical username and password and then sends it to the code below: checklogin.php: mysql_connect($db_host, $db_username, $db_password) or die(mysql_error()); mysql_select_db($db_database) or die(mysql_error()); $username=$_POST['username']; $password=$_POST['password']; $username = stripslashes($username); $password = stripslashes($password); $username = mysql_real_escape_string($username); $password = mysql_real_escape_string($password); $sql="SELECT * FROM users WHERE username='$username' and password='$password'"; $result=mysql_query($sql); $count=mysql_num_rows($result); if($count == 1) //ERROR APPEARS TO TAKE PLACE HERE { session_start(); $_SESSION['username'] = $username; $_SESSION['password'] = $password; header('login_success.php'); } else { header("location:login_fail.php"); } If I type in the wrong information everything works properly so I know the error appears to be taking effect in the marked if statement. I have been searching the internet now looking for solutions but none seem to match mine or I am overlooking them. I've made a few changes which brought me to this point, before I was receiving deprecation warnings. Also, I have checked the logs and they are empty of errors relating to this.

  Read the article

• can't install anything anymore with apt-get

  - by Aymane Shuichi

  Welcome this is the log I have when trying to install anything (php5-fpm after removing it) apt-get install php5-fpm Reading package lists... Done Building dependency tree Reading state information... Done php5-fpm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up php5-fpm (5.4.4-14+deb7u10) ... insserv: warning: script 'S55IptabLes' missing LSB tags and overrides insserv: warning: script 'S55IptabLex' missing LSB tags and overrides insserv: There is a loop between service IptabLes and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service networking at depth 7 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: There is a loop between service rc.local and mountall if started insserv: loop involving service mountall at depth 6 insserv: loop involving service checkfs at depth 5 insserv: loop involving service kbd at depth 11 insserv: There is a loop between service rc.local and mountall-bootclean if started insserv: loop involving service mountall-bootclean at depth 7 insserv: loop involving service urandom at depth 9 insserv: There is a loop between service IptabLes and mountdevsubfs if started insserv: loop involving service mountdevsubfs at depth 2 insserv: loop involving service udev at depth 1 insserv: There is a loop at service rc.local if started insserv: There is a loop at service IptabLes if started insserv: Starting IptabLes depends on rc.local and therefore on system facility `$all' which can not be true! (x99 times repeated ) insserv: Max recursions depth 99 reached insserv: loop involving service postfix at depth 2 insserv: There is a loop between service IptabLes and udev if started insserv: loop involving service mountkernfs at depth 1 insserv: loop involving service IptabLes at depth 1 Now here is the error i get insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing php5-fpm (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: php5-fpm E: Sub-process /usr/bin/dpkg returned an error code (1) The biggest operation I held before this was updating nginx from 1.2 to 1.6 and it was thanks to this site : here is the link : How to upgrade nginx from 1.2 to 1.6 on debian 7 Please help !

  Read the article

• Public Folders - Delete Public Folders from 2003 after migrating to 2010 (via Adsiedit) - safe?

  - by HeavenCore

  Similar Question: How do I delete a public store in Exchange 2003? We are ready to remove our Exchange 2003 server after having migrated all public folders and mailboxes to 2010. We ran for a week with the exchange 2003 server shutdown and everything seemed to work. When I try to delete the PF database from 2003 it says it contains replicas. Whilst migrating i only had one was sync working (from 2003 to 2010) so i believe that 2003 hasn't received the responses from 2010 saying replica removed. When I look in Public folders on the 2003 box none are listed, when i look in PF Instances they are all listed. I know everything has moved to the 2010 server and I know 2010 is not showing the 2003 server as a replica for any folders. I am looking to use ADSI edit to remove the Public folder database from the 2003 server, but want to ensure i am going to delete the right thing so that they do not get deleted from the 2010 database. Should i delete configuration, Services, Microsoft Exchange, Company Name, Administrative groups, First administrative group, Servers, Server name, Information store, First storage group, public folder store (Server name)? Or something else? I have checked and the only public folder with the old exchange server listed as a replica is SYSTEM CONFIGURATION. Thanks in advance.

  Read the article

< Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >