Search Results

Search found 24766 results on 991 pages for 'information retrieval'.

Page 770/991 | < Previous Page | 766 767 768 769 770 771 772 773 774 775 776 777  | Next Page >

• Public Folders - Delete Public Folders from 2003 after migrating to 2010 (via Adsiedit) - safe?

  - by HeavenCore

  Similar Question: How do I delete a public store in Exchange 2003? We are ready to remove our Exchange 2003 server after having migrated all public folders and mailboxes to 2010. We ran for a week with the exchange 2003 server shutdown and everything seemed to work. When I try to delete the PF database from 2003 it says it contains replicas. Whilst migrating i only had one was sync working (from 2003 to 2010) so i believe that 2003 hasn't received the responses from 2010 saying replica removed. When I look in Public folders on the 2003 box none are listed, when i look in PF Instances they are all listed. I know everything has moved to the 2010 server and I know 2010 is not showing the 2003 server as a replica for any folders. I am looking to use ADSI edit to remove the Public folder database from the 2003 server, but want to ensure i am going to delete the right thing so that they do not get deleted from the 2010 database. Should i delete configuration, Services, Microsoft Exchange, Company Name, Administrative groups, First administrative group, Servers, Server name, Information store, First storage group, public folder store (Server name)? Or something else? I have checked and the only public folder with the old exchange server listed as a replica is SYSTEM CONFIGURATION. Thanks in advance.

  Read the article

• how is the the linux console displayed to the user and how does the user go about changing the conso

  - by Chris

  I've been searching for the last two day on trying to understand how the console displays itself to the user and how to change the console settings. I've had some luck along the way but nothing that I've found has giving me a real clear explanation of how the console is displayed or how to change or control it's display settings. Some examples that of what I'm looking for are as follows: How is the console displayed on the screen? I know with X11 it uses your graphics card driver to display graphics to the screen, but how is the consoles text mode handled? Could some one ether explain this to me or point me to an in-depth overview of it all? Is it possible to have multi-head support in console mode with separate tty's on each screen? If so how would I go about setting this up? How would you go about changing the size of the console display from the default 80x25 to a custom size? I'm testing anything I find on a debian testing build, which is just the minimal base install on a virtual box. In time I will be using this information to setup my main system which is multi-head with 3 monitors. I would like to be able to support all three displays in console mode if possible.

  Read the article

• Getting the EFS Private Key out of system image

  - by thaimin

  I had to recently re-install Windows 7 and I lost my exported private key for EFS. I however have the entirety of my user directory and my figuring that the key must be in there SOMEWHERE. The only question is how to get it out. I did find the PUBLIC keys in AppData\Roaming\Microsoft\SystemCertificates\My\Certificates If I import them using certmg.msc it says I do have the private key in the information, but if I try export them it says I do not have the private key. Also, decryption of files doesn't work. There is also a "keys" folder at AppData\Roaming\Microsoft\SystemCertificates\My\Keys. After importing the certificates I copy those over into my new installation but it has no effect. I am starting to believe they are either in AppData\Roaming\Microsoft\Protect\S-1-5-21-...\ or AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-21-...\ but I am unsure how to use the files in those folders. Also, since my SID has changed, will I be able to use them? The other parts of the account have remained the same (name and password). I also have complete access to the user registry hive and most of the old system files (including the old system registry hives). I do keep seeing references to "Key Recovery Agent" but have not found anything about using, just that it can be used. Thanks!

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

• Tell if IIS is being asked to serve compressed pages?

  - by Graham

  Hi, I'm trying to find out if our IIS server is being asked to serve pages compressed. I'm a noob regarding a lot of this so am working my way through the issues. We're using IIS 6.0 and have correctly turned compression on. If I use Fiddler2 to analyse the HTTP requests via localhost, then Fiddler reports that the pages are compressed. If we then access the server over the network, either via its external URL or via the internal server name, Fiddler reports those pages as uncompressed. Therefore, it's logical to assume that something is getting in the way - presumably our ISA server. Our ISA administrator states that ISA is configured to allow compressed requests but what I want to do is to look at the requests coming through to IIS to see if IIS is being asked to serve pages compressed. I'm fairly convinced that our request is going to ISA, ISA is forwarding these, but not with the "compression" details - therefore IIS is not performing any compression. I've looked at the IIS logs but can't see anything obvious about the HTTP request. Is there any way I can check, on the web server itself, this sort of information? One thing that is confusing, but it may be normal, is that the Client IP making the request is not the orignal PC (i.e. mine) and not the ISA firewall, but the web server itself... Thanks

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• Ubuntu: Memory Leak

  - by Keener

  I'm having trouble finding from where this memory leak is occurring. I'm running Ubuntu 8.04 LTS on a Dell XPS M1530. I have 3GB of ram and I'm finding after about an hour or so of use top shows me 2GBs+ used. The strange thing is when I add up the memory percentages by PID either from top or ps aux I find that I should only be using about 20-25% of my available ram. What brought this to my attention was I've begun running vmware server again. Now, obviously the ram usage spikes when I load a virtual machine, but the memory VMware is using does not account for the memory usage I'm seeing via top or free. Stopping vmware server releases the memory which was allocated to it, but I'm still unable to find where this RAM is being used. After a complete reboot, of course, the memory is fine, but very quickly it climbs to 60-80% usage with the processes only appearing to account for a third of that. Any ideas where I should look for more information on what this could be?

  Read the article

• Productive Writing Software

  - by Nick Retallack

  What do you guys use to write a personal journal, notes, and reference information that you want to group and search through later? I'm not one of those crazy people who likes to share their journal with the world. Some things I like to keep to myself. It's quite nice to have a reference. Preferences for cross-platform stuff (windows, mac, linux) Some Background For Windows, there's a program called Yeah Write, which really changed my expectations about how easy it should be to start writing something. You don't open or close files -- just click an empty slot and start writing, or click a filled slot to work on another file. And you can organize things into categories by creating tabs. Now that I carry a Macbook, I've just been using TextEdit. I like it because I can't lose my work when my computer crashes: it auto-saves everything and restores it when I launch TextEdit again. But I make a mess, leave thirty open files, and save everything to one directory with no tags for easy grouping. Saving files and selecting the directory they should be in is too clunky to do in the middle of a meeting. And organizing files into folders in the Finder is a pain, since there's no tree view like on Windows. Sure, I'm lazy, but I miss Yeah Write. I'm not going to get a windows laptop just to use it though. Since the laptop I take my notes on is a mac, I'm gonna be biased toward mac solutions.

  Read the article

• Disk fragmentation when dealing with many small files

  - by Zorlack

  On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation may be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation? Additional Info: The average file size is 8-14KB Format information from fsutil: NTFS Volume Serial Number : 0x2ae2ea00e2e9d05d Version : 3.1 Number Sectors : 0x00000001e847ffff Total Clusters : 0x000000003d08ffff Free Clusters : 0x000000001c1a4df0 Total Reserved : 0x0000000000000000 Bytes Per Sector : 512 Bytes Per Cluster : 4096 Bytes Per FileRecord Segment : 1024 Clusters Per FileRecord Segment : 0 Mft Valid Data Length : 0x000000208f020000 Mft Start Lcn : 0x00000000000c0000 Mft2 Start Lcn : 0x000000001e847fff Mft Zone Start : 0x0000000002163b20 Mft Zone End : 0x0000000007ad2000

  Read the article

• After RAID failure SBS 2008 issues logging in and Exchange store does not mount

  - by Josh R

  today has been one of those days. Yesterday a hard drive in our Dell Poweredge 2900 server failed and the RAID array didn't degrade gracefully, so I called Dell (Server still under warranty) and got an engineer to work though the RAID issues with me. He was a nice guy but didn't do too much. We tried to put the RAID in a state where it was bootable and even though we only lost one disk there are still issues with the server. Once we got the server to boot there was an error message saying that the logonui.exe was corrupted and we needed to run chkdsk. I clicked through the error messages and the login screen never came up. So I power cycled the server and it chkdsk automatically but the login screen didn't appear. I tried safe mode, no difference there either. So the issues I am currently having are: 1) The server boots up, the loading windows screen comes up then it dumps me into a black screen where I can only see my mouse cursor. Ctrl+Esc doesn't work Ctrl+Alt+Del doesn't work 2) Some of the services come up: DHCP, DNS, DFS, and Print come up 3) The exchange information store and transport service don't start - I tried using mmc to connect to services.msc on the computer and start them but they throw an error message of "Can't start because group or dependency failed" Has anyone had a problem like this? Can anyone offer some guidance? Thanks a bunch!

  Read the article

• Windows 7: resizing the 'Save As' window

  - by Mark Miller

  I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

  Read the article

• Let varnish send old data from cache while it's fetching a new one?

  - by mark

  I'm caching dynamically generated pages (PHP-FPM, NGINX) and have varnish in front of them, this works very well. However, once the cache timeout is reached, I see this: new client requests page varnish recognizes the cache timeout client waits varnish fetches new page from backend varnish delivers new page to the client (and has page cached, too, for the next request which gets it instantly) What I would like to do is: client requests page varnish recognizes the timeout varnish delivers old page to the client varnish fetches new page from backend and puts it into the cache In my case it's not site where outdated information is such a big problem, especially not when we're talking about cache timeout from a few minutes. However, I don't want punish user to wait in line and rather deliver something immediate. Is that possible in some way? To illustrate, here's a sample output of running siege 5 minutes against my server which was configured to cache for one minute: HTTP/1.1,200, 1.97, 12710,/,1,2013-06-24 00:21:06 ... HTTP/1.1,200, 1.88, 12710,/,1,2013-06-24 00:21:20 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:22:08 ... HTTP/1.1,200, 1.89, 12710,/,1,2013-06-24 00:22:22 ... HTTP/1.1,200, 1.94, 12710,/,1,2013-06-24 00:23:10 ... HTTP/1.1,200, 1.91, 12709,/,1,2013-06-24 00:23:23 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:24:12 ... I left out the hundreds of requests running in 0.02 or so. But it still concerns me that there are going to be users having to wait almost 2 seconds for their raw HTML. Can't we do any better here? (I came across Varnish send while cache , it sounded similar but not exactly what I'm trying to do.)

  Read the article

• Glassfish and SSL [closed]

  - by Richard

  I'm struggling to get SSL working on Glassfish 3.1.1. I've been following tutorials like http://javadude.wordpress.com/2010/04/06/getting-started-with-glassfish-v3-and-ssl/ and SO posts like this Issues with setting up SSL on Glassfish v3 The above links are for information only. I've summarised what I've done below. As far as I can tell I'm doing everything correctly but I'm getting this error: SSL configuration is invalid due to No available certificate or key corresponds to the SSL cipher suites which are enabled Some background of what I have done: My cert is from GoDaddy. I generated the CSR from a new keystore (keystore.jks), then imported the resulting certs back into the same keystore and set the keystore password to the same pwd as the GF master password. Then created a new SSL listener in GF and pointed it at my keystore file (which I copied into domains/domain1/config). Set the Nickname to the alias of my cert (which is something liem 'mydomain.org' i.e. the name that I get when I run keytool -list. In my ciphers section in the network listeners page, I leave the defaults in place (empty, which means all ciphers are available I think). In domain.xml I've replaced all instances of s1as to 'mydomain.org'. This is the question: What exactly is causing the error highlighted? I'm guessing it's a mismatch between my listener config and aliases in my keystore, or something similar, but I'm not really sure what. Thanks

  Read the article

• NTbackup doesn't complete on system state

  - by Joe Majsterski

  I have a Windows 2003 server that is running a semi-custom backup task. The scheduled task calls NTbackup with a few switches depending on whether it is a full or incremental backup. Most of the time, the NTbackup completes fine, and the wrapper then appends the NTbackup log into its own log before adding a few final comments and completing. The problem I am having is that sometimes, NTbackup seems to just... blank out. It always completes backup of the C: and E: drives, but then it will start the system state and not add any more messages into the event log saying it completed that. And the NTbackup log is left empty, since it doesn't write anything to the log until all the backup tasks are complete. This is causing the wrapper to append no text into its own log. That causes problems for us because we read the information out of that log to determine whether backups are failing. The wrapper task also reports that it is completing normally in the event log. Anyone ever seen a case where system state doesn't complete consistently? To be clear, the server is not logging any error messages anywhere. It's just not seeming to complete or log anything.

  Read the article

• Diagnosing RAM issues

  - by TaylorND

  I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

  Read the article

• Confused with creating an ODBC connection, apparently I have two separate odbcad32.exe files?

  - by Hoser

  Alright, this is my first time working with this so forgive me if I'm a little confusing or vague. I have a server with Windows Server 2008 Standard without Hyper-v (6.0, Build 6002). I'm running a small website off this server and using a Microsoft Access database to store some information coming in through the website. I'm sure the PHP I have written to open the ODBC connection is correct as it has worked for me when I created this website in a testing environment on a laptop. My current issue now is that it seems like I have two different odbcad32.exe's, and one doesn't appear to have a driver for a .accdb file, and only a .mdb file. The other has a driver for both. The first one I speak of has a driver titled 'Driver do Microsoft Access (.mdb)', the second one has a driver titled 'Microsoft Access Driver (.mdb, .accdb)'. I access the first odbcad32.exe by going to C:\Windows\SysWOW64\odbcad32.exe, and then the one that seems to have the driver I need I go to Control Panel-Administrative Tools-Data Sources(ODBC) and simply create a new connection in the System DNS tab. Whenever I make changes to the one that I access through the Control Panel, I see no changes, however if I use the odbcad32.exe file in SysWOW64 I do get some changes in the errors that come back to me. The main difference I noticed is that when I set up an ODBC connection with the Control Panel method it said it simply couldn't find the ODBC connection, but when I made a .mdb connection in the SysWOW64 one (and pointed it to a .accdb file) it says Cannot open database '(unknown)'. It may not be a database that your application recognizes, or the file may be corrupt. Which makes it seem like it is this odbcad32.exe version in SySWOW64 that is being recognized as the 'correct' one. Is there any way to fix this? I've tried to be as thorough as possible but if I've been confusing or left anything out let me know.

  Read the article

• Security Token for Mac/Linux/Windows, self-managed, pref. open source?

  - by DevelopersDevelopersDevelopers

  I'm looking to buy an evaluation security token (combined smart card/usb reader) for my business that works on: Windows 7 x64 OS X 10.6.x x64 Ubuntu Linux (64 or 32 bit, 10.04 or 10.10, I can bend based on possible tokens) Functionality I need is: Login authentication Authentication for whole-disk encryption (in Linux/Windows, Mac is flexible here) Signing/encryption using PGP and x.509 certificates RSA-2048 key-capable (1024 not good enough.) I can manage the certificates myself Open source middleware/drivers (not necessarily FOSS, just source available. Can flex on this, I just want to be able to audit the code. OpenSC-compatible on Linux would be great.) Is there any token that can do all of this? Or would I need multiple ones to accomplish this? Or do I need to look at smart cards and readers to get this? I have been researching this for a while and have had a heck of a time even getting accurate information about products. Also, I am in the USA, and it appears that EU export laws prevent me from buying from there, so those vendors are out. I was looking at Feitian tokens from Gooze, but since they are in France I can't buy.

  Read the article

• Changing the View of a Folder When It Is Opened from Finder

  - by user60044

  When I was running OS 10.4 I had all my folders beautifully organized with position and which ones should be opened in View mode and which one in Icon, etc. When I transitioned to 10.6 I found that OS ignored all that information and imposes an awful consequence of changing the view for some folder and that view moving up to all parent folders which don't have their views locked. The only way I can think of to get this functionality back is to either write a program that given a root directory will enumerate it setting the views based upon a static template I have. The other way I thought I could accomplish this is by Folder Actions. Aside from the fact that I don't know AppleScript it seems folder actions cannot be inherited. Since I have 1000s of folders involved here, all being inherited from a single root, I could not possibly manually add that action to each of those folders. What I would like to have is a folder action that whenever I open the folder from Finder, then if it contains any JPG, GIF, etc. type image files that it will automatically open that folder with a view of Icon with a reasonable size to support the number of images. If the folder contains only folders, then to open that folder in the list view. Does anyone have anything that could do this for me? Thank You, -- Mark

  Read the article

• Are there any benchmarks showing difference between hardware virtualisation enabled/disabled?

  - by Wil

  I have a 13" sub-laptop/large-netbook, it has an AMD Athlon Neo X2 L335, and I chose this one because it supports hardware virtualisation. In the end, I hardly do any virtualisation on it, however, when I do... it is fast. To my shock, I went in to the BIOS and saw that virtualisation was disabled! I turned this on and, I see no speed difference.... or at least none that I can tell. I do not have time to do a full set of benchmarks - and I run quite a bit of software on the host, so it wouldn't be scientific. I have searched quite a few places and I just can not find any benchmarks showing the difference of virtualisation bit enabled/disabled on the same hardware. Does anyone have any benchmarks they have seen that they can share? In addition, I know there was an uproar a while ago as Sony disable the hardware virtualisation on some models and only offer it in their higher models as a premium feature, however, apart from forcing an up-sell, are there any benefits to having it disabled e.g. battery/heat? I just can't find any information and can't work out why it would be disabled by default. Edit--- To add, The only thing I can find is that without it, you can not perform x64 virtualisation as fast. This is the only down side I can find. However, if this is the only difference, then I am still interested in the second part of the question - why offer the option to disable it?

  Read the article

• LAMP Stack Version Help -- Is there a website or version tracker source to help suggest the right versions of each part of a platform stack?

  - by Chris Adragna

  Taken singly, it's easy to research versions and compatibility. Version information is readily available on each single part of a platform stack, such as MySQL. You can find out the latest version, stable version, and sometimes even the percentage of people adopting it by version (personally, I like seeing numbers on adoption rates). However, when trying to find the best possible mix of versions, I have a harder time. For example, "if you're using MySQL 5.5, you'll need PHP version XX or higher." It gets even more difficult to mitigate when you throw higher level platforms into the mix such as Drupal, Joomla, etc. I do consider "wizard" like installers to be beneficial, such as the Bitnami installers. However, I always wonder if those solutions cater more to the least common denominator -- be all to many -- and as such, I think I'd be better to install things on my own. Such solutions do seem kind of slow to adopt new versions, slower than necessary, I suspect. Is there a website or tool that consolidates versioning data in order to help a webmaster choose which versions to deploy or which upgrades to install, in consideration of all the other parts of the stack?

  Read the article

• Is there an Installer Analyser tool that can list what Registry Keys will be created?

  - by EvoGamer

  I can think of 3 ways to achieve my goal: Create a clean VPC, install a given piece of software, and compare the before and after states. Somehow reverse-engineer the installer. Somehow redirect the output of the installer in question so that all registry calls and copy/move file commands are recorded, but not executed. The first option can be done manually, or potentially automated, but I feel it's rather OTT for my needs. The second could cause all sorts of licencing issues, not to mention it may not always return a correct result. Also, without delving into hex editing, I can't think of a way that it would be possible to do manually (some installers - eg Anti-Virus software - may react unfavourably on automated attempts to investigate the installer). The third option shows the most promise, although if the first could be stripped down into a lightweight throwaway environment, it would work pretty much the same way. However, I'm not sure how to do it. So my question is: What tools are available (if any) and/or how could I find out this information manually? I'm not looking to reverse-engineer anything (if I can help it), but I just want to know exactly what changes are being made to my PC by a given piece of software.

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• Microphone array support in Windows. Info on performance and compatible hardware?

  - by exinocactus

  It is officially claimed by Microsoft (Audio Device Technologies for Windows), that Windows Vista has an integrated system-level support of microphone arrays for improved sound capturing by isolating a sound source in target direction and rejecting ambient noise and reverberation. In more technical terms, an implementation of an adaptive beamformer. Theoretically, microphone arrays with 2-4 mics can substantially improve SNR under some conditions like speaker in front of the laptop in noisy environment (airport, cafe). Surprisingly, though, I find very little information about commercially-available products supporting these new features. I mean products like portable usb micropone arrays or laptops or flat screens with integrated mic arrays. I could only find info about two laptop models having "noise cancelling digital array microphone". These are Dell Latitude and Eee PC 1008P-KR. Now my questions: Do you have any experience with the Windows beamformer implementation? For instance, in the above mentioned laptops. How well does it work? Are there any tests results available in the net or in print (papers?)? Do you know about other microphone array hardware? What could be the reason why mic array technology didn't get sucess Is there mic arrays support in 'Windows 7'?

  Read the article

• crontab not running on VirtualBox unless I'm logged in

  - by Mike

  I am running Ubuntu Server 9.04 in VirtualBox on my work PC as a development environment. I have some scripts that I've put in my user's crontab that run throughout the day while I'm SSHed into the VM. Last night, I closed PuTTy and all of my other running applications (except for VirtualBox and the VM) and went home. I came back this morning to discover that my cron jobs didn't run at all, yet when I SSHed into the VM, the next scheduled job ran. I set the schedule to 5min to test, disconnected again, and the jobs stopped running on schedule. They seem to only run if I'm logged in to the machine. Obviously, I want them to run on schedule even if I'm not logged in to the VM, otherwise there's no point. Is there something I've failed to configure correctly? New Information: There are now 3 entries in /var/log/cron.log saying the following "Mount of private directory return code [256]"... the entries correspond to when the cron job is supposed to run. I thought they are supposed to run as my userid? Why would my own userid be unable to run a script in my home directory?

  Read the article

• Verification of downloaded package with rpm

  - by moooeeeep

  I wanted to install a package on CentOS 6 via rpm (e.g., the current epel-release). EDIT: Of course I would always prefer the installation via yum but somehow I failed to get that specific package installed using this normal approach. As such, the EPEL/FAQ recommends Version 2. As I'm downloading the package through an insecure channel (http) I wanted to make sure that the integrity of the file is verified using information that is not provided with the downloaded file itself. Is this especially true for all of these approaches? I've seen various approaches to this on the internet: Version 1 rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm Version 2 rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm Version 3 wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-7.noarch.rpm rpm --import https://fedoraproject.org/static/0608B895.txt rpm -K epel-release-6-7.noarch.rpm rpm -i epel-release-6-7.noarch.rpm I do not know rpm very well, so I wondered how they might differ? My guess (after reading the manpage) is that the first should only be used when the package is previously not installed, the second would additionally remove previous versions of the package after installation, the first two omit some verification steps before the actual installation that are done by rpm -K. So my main questions at this point are Are my guesses correct or am I missing something? Is the rpm --import ... implicitly done for the first two approaches as well, and if not, isn't it necessary to do so after all? Are these additional checks performed by rpm -K ... any relevant? What is the best (most secure, most reliable, most maintainable, ...) way of installing packages via rpm in general?

  Read the article

< Previous Page | 766 767 768 769 770 771 772 773 774 775 776 777  | Next Page >