Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 108/170 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Can't start ubuntu 11.10, Stops at login screen!

  - by Martinpizza

  I have been trying to dual boot ubuntu with windows 7 via WUBI on my custom built pc but without success. When i start the computer i can choose windows or ubuntu i choose ubuntu and when i should get to the login screen the screen just stays purple/pink. Tried safe mode but cant get in there either. I have tried reinstall but did not work either. :( The second time i install ubuntu the screen was purple/pink and the screen was cut of so the left side was on the right side and right side on left side (hard to describe) Third time installing (The last time) it is just like the first time please help!!!! cant get nowhere without help i am kinda new at ubuntu and its creepy commands. Had ubuntu on my old computer. I think the problem is my hardware so here is my computer specs: Amd Fx 6100 Amd HIS Radeon HD 6950 ICEQ X Asus Sabertooth 990fx 1TB Harddrive I have no idea the name on it Please Help me!! Sorry for my bad English! :D

  Read the article

• display port on x230 not working

  - by Aaron

  having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

  Read the article

• Windows Phone 8 : Nokia dévoile les prix des Lumias 820 et 920, sorties prévues pour novembre entre 500 Euro et 650Euro

  Windows Phone 8 : Nokia dégaine ses Lumia 920 et 820 Pour contrer l'iPhone 5 ou le Galaxy SIII, suffisant ? C'est peu dire que l'attente était grande, une semaine après la présentation du Samsung Ativ S et une semaine avant celle de l'iPhone 5. Les premiers Lumias de Nokia sous Windows Phone 8 devaient être annoncés. Les rumeurs parlaient de terminaux avec des batteries rechargeables sans fil. D'autres, d'écrans de 4.3 et de 4.5 pouces, de processeurs Dual Cores cadencés à 1.5GHz, et 1GB de RAM. On parlait également d'un APN/Caméra à 8 megapixels (décliné de la technologie PureView de Nokia à 41 Megapixels)...

  Read the article

• Running projects from NTFS partition on Ubuntu

  - by the_hamster

  I'm dual booting Windows 7/Ubuntu 12.04. I want to run C++/Java projects from a NTFS partition, where I keep generally all my files and projects. I fiddled with the fstab. One time I removed 'noexec', the other I changed it to 'exec'. After that,each time, I remounted the partition and it still didn't work. I tried using sudo mount -o remount,exec /media/mypartition It didn't work either. There was a somewhat similar question already, but it didn't have the proper answer for me or I didn't know how to make it work(note: I am a total newbie with Ubuntu and Linux in general).

  Read the article

• How can I fix intermittent iSight camera functionality on a Macbook Pro 5,2?

  - by Mmmm

  I have a Macbook Pro 5,2 laptop dual booting OSX and Ubuntu. The built-in iSight video camera works only sporadically. By that I mean that sometimes if I boot and try to use the camera it does not work (most of the time) but other times it does. I don't have good repeatable data regarding when it does vs. when it doesn't other than to say that it always seems to work right after I upgrade to a new Linux kernel with the Update Manager and reboot, but then eventually stops working again until I upgrade the kernel again. That is hard to test repeatably, so it's hard to know for sure that that is the case. This has happened consistently with every version of Ubuntu from 10.10 through 11.10. I can get around this by booting into the OS/X partition, since all of the hardware obviously works perfectly on that side of things, but it would be great if I could remain in Ubuntu and do the same thing. Thanks in advance for any inSights.

  Read the article

• Mouse Problem on Ubuntu 12.10

  - by KashmirHackers

  I had a strange mouse problem on Ubuntu 12.10(64-Bit), the problem is that when I turnoff power supply/power goes off, the red laser light of my mouse also goes off and my mouse stops working but it works fine when A/C power supply is on. First I thought my mouse or my laptop's USB ports had problem but since I am using Dual Boot with windows 7, I checked my mouse on windows 7 and it works fine, even I turn off power supply. Today,I thought that I should give a try to Linux Mint 14-RC (which is based on same Ubuntu 12.10) and after installing linux mint when I plugged in my mouse it worked fine even though power is off. Don't know what is really going on, and I am afraid if I reinstall my Ubuntu 12.10 the problem will remain.

  Read the article

• The use of LGPL for Commercial use

  - by Smarty Twiti

  I am trying to make my first app for sale, I would like to ask some questions for those who have already sold their software: Have you used a Framework/Lib whose LGPL License? if yes, what are the impressions of your customers? for example, if your customers/ competitors from the market reveal technology/secrets that you used in your solution (as LGPL requires that you make a Dynamic Link (.DLL) for your libs and you clearly tell the use of a Lib/Framework ...). Full story: For my project, I used a framework LGPL/commercial (Dual License) the second one it was too expensive (about 3000 USD) which pushed me to use LGPL.. however I still concerned.. That is why I ask for advise and especially motivations... Please do not hesitate to participate... Thanks in advance.

  Read the article

• Please Help to bring back power to my machine

  - by Acess Denied

  I Have a samsung N150plus netbook That I have been using for a while now. I left it on and plugged to a wall outlet and went to bed. I dual boot ubuntu and win7. I tried to update the win7 to sp1 and I dozed off. I woke up and saw the machine has been booted to ubuntu and logged in as guest, which translate to mean one of my room mates have tried to use the machine and they all have denied using my machine. I tried to reboot to windows and then it appears to have no cpu, hard disk and cpu fan activity. only one led seems to come on when i plug it in. its only the led that indicate the machine is powered on powers steadily. I really cant afford to buy a new machine now and I need the machine to complete my last project in school for my last year. Help Please

  Read the article

• RDP locks up login, doesn't unlock on Windows

  - by private_meta

  From time to time, my system, when I try to login TRHOUGH or AFTER a remote connection, locks up the login session. I can't login anymore, the screen turns black (the monitor is still active, the image is black). Especially in the recent case, the system did not come back from the lock-up, and I had to reset the computer. Any idea what might be the issue here? More information: Both Computers are Windows 7, The RDP Server has a wired connection, the Client has either Wireless or Wired. The network card involved on the server is a "Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)" card built-in on an ASRock Mainboard. I'm using either local LAN or internet connection through NAT/Router.

  Read the article

• How to setup wireless radio to network using 2 nics?

  - by CptanPanic

  I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

  Read the article

• Resuming from hibernation shows a fuzzy "static" screen

  - by Ross

  When I resume from hibernation in Ubuntu 10.10 the screen shows static, very similar to what you see on an analogue TV that hasn't been tuned properly. This also occurs on boot from shut down, but only for a moment after the Plymouth boot screen. The static lasts for at least 5 minutes. An odd thing that happens is that the mouse pointer, as a lighter square of static, becomes visible and you can move it around. Attempting to change into a terminal (i.e. Ctrl+Alt+F1) doesn't seem to work (and I'm not sure if that can be done from the login screen). Resuming from suspend has different issues - vertical lines appearing for a second before appearing to be in terminal mode (blinking cursor) and then going to the lock screen. I'm running Ubuntu 10.10 on a Dell Studio 15 with ATI graphics, however I'm not using the proprietary drivers as I had issues with dual-screen support, so it's the generic X.org drivers being used.

  Read the article

• Apt Stalls When Using HTTP Sources

  - by UltraNurd

  I was getting some to me inexplicable behavior from apt-get/aptitude on an admittedly crusty old webserver. While it was otherwise running fine, as soon as I tried a package upgrade, after a downloading a few updates it would stall completely, then my SSH session hung (and I was unable to reconnect), thus requiring a hard restart. First, I switched to a different package source in /etc/apt/sources.list, but still got the same behavior. At this point I was assuming the NIC was dying in some weird way... but as soon as I changed the package source to use FTP instead of HTTP, everything worked fine, and I was able to upgrade. For now I'm not too concerned since I have an easy work around, but it implies that there's something very weird with my network setup, since it seems to be protocol (or port?) specific. I didn't think any of my NAT setup would affect outbound traffic, but I could be crazy. Any ideas what I should try to look for?

  Read the article

• MacBookPro 7,1 can only see one cpu

  - by gozzilli

  On a MacBookPro 7,1 running ubuntu 11.10, System monitor only sees 1 core (instead of 2). cat /proc/cpuinfo | grep 'cpu cores' also gives: cpu cores : 1 I followed this guide and added acpi_apic_instance=2 to the line with GRUB_CMDLINE_LINUX_DEFAULT, but that doesn't seem to change the situation. What can I do? I'm using rEFIt, installed under MacOS, and running in dual boot with MacOS. After the rEFIT menu, I'm still presented with the GRUB menu (I'm assuming that's normal). I saw similar posts on this matter, but could not fix my problem with what they suggested. EDIT: With the method mentioned above the computer runs sometimes with 1 core and other times with 2. Why is that? How can it be fixed?

  Read the article

• GeForce8800 ultra

  - by Gunnar

  I have been running Ubuntu 10.04 with GeForce 8800 Ultra graphics card without any problems for many months until a few days ago, after some updates, everything stopped working. Can't use Stellarium (my favorite program) and everything (even the mousecusor) stops responding for a long time. Takes ages to load the desktop and everything is just "f..." B.t.w. I have a dual boot and WinXP is not having this problem with the 8800 card. So, elementary... What's going on between Ubuntu and Nvidia? Best regards Gunnar

  Read the article

• Where would an S3 upload speed cap originate?

  - by CoreyH

  I do a ton of uploading to S3 and am experiencing capped speeds and I can't quite figure out how to address it. The setup: Windows Server 2008 R2 x64, external HD, using a Java based upload tool called Jsh3ll and custom VBS scripts to kick the jobs off. Running one process at a time, I am always limited to about 4mbps. I have FiOS at 35/35mbps speeds, so it isn't an outright limit. AND, I can run parallel instances and can go all the way up to 35mbps, so I know the problem isn't gateway/nic/machine/amazon related. Running parallel instances works to a degree as a solution, but increases the complexity of my workflow greatly. Solving this would make my life dramatically easier. When I was first doing this I was playing around with a bunch of Windows TCP parameters and was able to briefly get unconstrained bandwidth, but it wasn't repeatable. Thoughts?

  Read the article

• Installing Ubuntu, Switches of to intergrated Graphic Card

  - by Clenn

  I got a problem. I'm willing to dual boot ubuntu 12.04 on my desktop. After i made a bootable USB ubuntu on it i'm going to install it. I boot it and I choose Install ubuntu roughly said. The problem is the following, It seems that when i press enter to start the install he switches of to my intergrated graphic card. I looked up in my bios what my primary graphic card selection is and it was on PCI Express (the option it supossed to be). So I'm clueless right now. I don't know how to fix this because I'm quite learning linux atm (school and by myself). Your faithfully, Clenn

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Ubuntu hanging problem

  - by JMearsXS

  I have a problem with ubuntu 12.04 LTS on my custom tower pc in which the OS hangs at specific points:- - live usb with persistence: hangs when mouse appears. - installed to hard disk: hangs after login, logon sound never plays. i am a relative newbie with linux so any terminal output would not make sense to me :) the pc specs are as follows: - MSI MS-7301 Cuba motherboard - 3GB DDR2 RAM (NOT dual channel) - ATI Radeon HD 5450 gfx card the live usb works fine on all other PC's i tried it on. could any one help me ?

  Read the article

• Cannot boot from Ubuntu USB

  - by Safi

  I create a ubuntu 10.10 bootable USB via the method that is described on the download page of ubuntu. I made that from windows and also from ubuntu 10.04 (I have dual boot). When I boot from the USB made, the menu shows and when I run it, it gives a beep and nothing else. It never boots. USB creation from both methods result the same. I downloaded ubuntu via the torrent provided from Ubuntu. Any help will be very appreciated. I want to make my USB just like a Live CD so that I can run it on some other computers also.

  Read the article

• Slowness on Exchange 2007 Server (network related we think)

  - by Az

  We are seeing some odd behavior out of our exchange 2007 server. I believe it is network related as during the slowness in response from the exchange server. During these times downloading files to server is fraught with connection resets and extreme slow download speeds that are not affecting other servers right on the same subnet with the same gateway and ISP. We have about 50 users at a time using Outlook 2003 from a terminal server not displaying any other signs of slowness, all network slowness is confirmed trying downloads on the exchange server itself. Checked for virus issues, there are none. Checked for hardware issues, none found I am noticing between 200-400 TCPv4 connections established I am seeing around 100k tcpv4(active) connections according to perfmon are these numbers odd? Has anyone run into anything similar? Our server has a gigbabit NIC linked to a gigabit switch using cat6 so I do not believe it is "physical". Thanks!

  Read the article

• Why is my Workspace switcher view skewed

  - by Lee

  I have been using Workspace switcher in Ubuntu just fine but recently have encountered this problem. The windows in the switcher don't fill the screen. I must have pressed some combination of buttons somehow but can't find any information anywhere in regards to resizing them. As you can see in the screen shot it looks like a perspective view or something. http://i1115.photobucket.com/albums/k553/lmt337/Screenshotfrom2012-07-04103519.png I should also add I have a dual monitor setup and nvidia graphics. The switcher still works but the fact the screens dont fit my actual screens is driving me nuts. Thanks in advance for any help.

  Read the article

• Blank screen when "boot from USB"

  - by Nathan

  OK so, here is what I have done: I downloaded the iso "ubuntu-12.04-desktop-amd64" I used "Universal-USB-Installer-1.9.0.0" to make a bootable USB I restart PC and change the boot option to USB HDD I get the menu to: Boot from USB Install to Hard drive Help etc When I click Boot from USB or Install to hard drive, loads of text flies past and then I get a blank screen and I cant see anything? What can I do so I can see the installation screen? Im using a dual monitor setup from my GFX card and my main display is on my HDMI port to my TV.

  Read the article

• Ubuntu 13.10 - Black screen after logging in after installing nVidia drivers

  - by Javacow

  I recently installed Ubuntu 13.10 in a dual-boot with Windows 7, so I'm still quite new to using Linux. Most things were working fine, and I could log in normally (apart from the first login after install, which spent about 2 minutes on a black screen before going to the desktop). I installed the restricted Nvidia drivers with the command: sudo apt-get install nvidia-current Since then, after I enter my password and log in (the login screen itself works perfectly), I get a black screen with the cursor and nothing happens from that point onwards. Basically, what I would like to know is how to get back to the normal Ubuntu desktop and (hopefully) still be able to use Nvidia drivers.

  Read the article

• If I intend to use Hadoop is there a difference in 12.04 LTS 64 Desktop and Server?

  - by Charles Daringer

  Sorry for such a Newbie Question, but I'm looking at installing M3 edition of MapR the requirements are at this link: http://www.mapr.com/doc/display/MapR/Requirements+for+Installation And my question is this, is the Desktop Kernel 64 for 12.04 LTS adequate or the "same" as the Server version of the product? If I'm setting up a lab to attempt to install a home cluster environment should I start with the Server or Dual Boot that distribution? My assumption is that the two are the same. That I can add any additional software to the 64 as needed. Can anyone elaborate on this? Have I missed something obvious?

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >