Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 109/170 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

    - by Lorenzo
    I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

    Read the article

  • Encrypted windows partition with ubuntu / Grub configuration

    - by Flow
    guys i would like to encrypt my windows partition only , as i have dual boot windows 7 ultimate and ubuntu 12.04. I would like to encrypt all my windows partition with truecrypt as i suppose you already now , but i was wondering how will it work ? I suppose when i am gonna encrypt the whole partition of windows with true crypt , when i will boot linux grub will not find the partition ?! how can i do for the grub to find my partition windows encrypted ? thanks guys ps : basically more simple , i will encrypt my windows partition only , but grub will not detect anymore my windows partition?

    Read the article

  • ubuntu 11.10 on MacBookPro 7,1 can only see one cpu

    - by gozzilli
    On a MacBookPro 7,1 running ubuntu 11.10, System monitor only sees 1 core (instead of 2). cat /proc/cpuinfo | grep 'cpu cores' also gives: cpu cores : 1 I followed this guide and added acpi_apic_instance=2 to the line with GRUB_CMDLINE_LINUX_DEFAULT, but that doesn't seem to change the situation. What can I do? I'm using rEFIt, installed under MacOS, and running in dual boot with MacOS. After the rEFIT menu, I'm still presented with the GRUB menu (I'm assuming that's normal). I saw similar posts on this matter, but could not fix my problem with what they suggested. Any help appreciated. Thanks!

    Read the article

  • What classes are useful for an aspiring software developer? [closed]

    - by Anonymouse
    I'm a freshman in college trying to graduate in 3 years with a Math/CS dual major, and I don't have a lot of time to be fooling around with useless classes. I've tested out of most of my gen eds and science-y courses, but I need to know: what math and cs courses are most important for someone interested in algorithm development? Math courses already taken: Calc I-III,Linear Algebra, Discrete Math. CS courses taken: Java. Math courses I'm planning to take: ODE, Linear Algebra II, Vector calc, Logic, (Analysis or Algebra), Stats, probability CS courses I'm planning to take: C(required), Data Structures, Numerical Methods, Intro to Analysis of Algorithms. Which is better, analysis or algebra? Did I take enough CS courses? Am I missing out on anything? Thanks.

    Read the article

  • Broadcom bcm4311 rev2 Full disabled on battery

    - by Antonio BG
    Ok this is my problem... My problem begins while ago when I installed ubuntu 10.10. (is the same with 11.04,11.10...) My wireless card is disabled if the power cord is unplugged, and the only way to fix this is rebooting my pc WITH the power cord plugged and if I use lspci command, it doesn't show me the wireless card. is like if I've removed the wireless board from my laptop port. I've searched a lot of solutions for bcmw4311 issues, but none of them fix my problem because when apply one of the fixes, if I unplug the cord, my wireless card it just gone away... I have dual boot on my pc(w7,ubuntu), I've tried with full installation just to see if this is the problem, but not, is the same. On windows all work correctly with and without power cord.. so this is not a hardware problem, is more like a kernel problem. anyway I can use wireless with power cord plugged, but c'mon this is a laptop not a desktop pc XD haha any help is welcome

    Read the article

  • Windows 2003 - RAS service - VPN client can only connect to server, not internal network

    - by Gk
    Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

    Read the article

  • Why does Hyper-V and Windows Backup crash (BSOD) after successfull backup?

    - by Payson Welch
    Hello I am running Server 2008 R2 with a handful of Hyper-V guest nodes. If Windows backup runs without any of the Hyper-V nodes running, the server is fine. If Hyper-V runs a backup while the Hyper-V nodes are running, it is fine until a few minutes after the backup completes, and then it BSODs. The storage location for the backup is iSCSI - I am wondering if anyone has any input on what might be causing this? I don't have the Hyper-V nodes setup on a vlan and there is only one NIC on the server. Is it possible this is a networking / driver issue, and if so how would I reconfigure the networking to fix this?

    Read the article

  • kubuntu 12.04 won't start

    - by daker
    I have dual boot config with kubuntu 12.04 and Windows7. My problem started this morning when I tried to boot kubuntu. Everything worked fine a couple of days ago and I have not done any mayor system configurations since then. Choosing kubuntu options from grub gives me this screen A couple of minutes later this screen is shown And then it gets stuck. Have been waiting for ~5mins without anything happening. I have tried running fsck from recovery menu without any errors. I have also tried booting in failsafex mode which gives me "Fatal server error: no screens found". apt-get update gives me "Duplicate sources.list entry". I have also tried fixing broken packages from recovery menu. What should I do next?

    Read the article

  • Unable to mount location, Can't mount file

    - by user116008
    I'm a new user to Ubuntu and I have a problem: I had Windows XP in my computer and I had two partitions: C (for system data) and D(for my personal stuff), then, during the Ubuntu installation I chose the Advanced Settings and formated C partition and left D partition intact, went back and chose Install Ubuntu and replace Windows and it installed fine. The problem is that now I open Nautilus and go to Computer, in there it shows my D partition, 640 Hard Disk, but when I try to mount it displays me a message: "Unable to mount location. Can't mount file". I ask you to explain me step-by-step what I need to do because I'm not an advanced user. My computer specs: 2 GiB RAM, Proccesor Pentium(R) Dual-Core CPU E5400 @ 2.70GHz × 2, Graphics Unknow (It's Nvidia GeForce 220 {1GB} or something), OS type 32-bit, Disk 628.0 GB P.S.: My HDD is internal, I'm not using external Hard Drives. Thank You!!! Mike

    Read the article

  • 12.04 Install on a HP dv9000 screen problem

    - by Tim Kounadis
    Installed 12.04 on a HP dv9000 laptop. First tried to install with a Windows partition; then tried to install and move files from windows but not have a dual boot; then tried to install and have 12.04 have the system all to itself. The install was done off a burned CD... All went well. On reboot - it takes a while to come up the user ID and password challenge. After providing input screen renders and then turns black... First time Ubuntu user/installer - not technical :-)... Thanks for any help... I'll keepon digging in parallel.

    Read the article

  • How to make WinServer's AD work with Linux DNS/DHCP on VMware?

    - by Borald
    Hope you're fine. I got 2 virtual machines : Windows Server 2008 with Active Directory installed. Linux that works as a DNS and DHCP Server I need to make them work together, but I don't if this is going to be possible because VMWARE is sharing the NIC with other virtual machines and computer itself. I've assigned different IP static adresses to the servers. Is there a way for me to make these things get interconnected and test them on some virtual clients ? Any help will be much appreciated... (useful links,tutorials,..) Thanks in advance !

    Read the article

  • Why are my downloads up to ~1500KByte/sec only, when the ADSL connection locks at 13611Kbit/s?

    - by leladax
    No uploading is going on other than the overhead of downloading which appears to be not high for the abilities of the connection: Only about 30-40KByte/s when the router locks at 1012Kb/s and other direct uploads or uploading overheads can reach more than 100KByte/sec so I don't think it's a congestion at uploading that is doing it. Is there something I miss? Because I assume 13611Kbit/s should be ~1701Kbyte/sec. Is it an overheard at the ADSL level I don't understand? Could it be the ISP doing it? If it's active throttling it can't be on single connections since 2 high speed connections still go up to ~1500KByte/sec. It's not an example on torrents or other complex situations. The tests were on Ethernet, but I doubt the results would be different on wireless. I wonder if the settings of those connections at my end could be doing it, e.g. MTU settings, though I haven't touched the defaults of a common Realtek NIC.

    Read the article

  • Ubuntu 12.10 Laptop temperature

    - by romi
    I'm using a laptop having dedicated graphics card with Ubuntu and Windows 7 dual boot. The windows 7 idle temperature for cpu is 51C average and gpu is 46-48.5C, and when in load Cpu temp varies between 55-61C, and GPU 49-51 MAX. But in ubuntu idle temp CPU: 54c Gpu(ati radeon,proprietary driver installed): 50C and on load cpu: 58-69C gpu:53C max. Is it normal? If not is there any solution? Note that i'm using jupiter,latest graphics driver, grub tweaks etc.

    Read the article

  • Windows 2008 Server Unable to activate with other methods

    - by matt king
    I'm trying to activate windows 2008 server SP2 today since the activation trial is done. I do not have an internet connection with this server so I can not activate online, and with the other servers in this farm I've been able to run the slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx and then it would open up the activate by phone method and we would just activate that way. I say again, I don't have an internet connection so I can not do the online activate. If I do the slui 4 it brings up the activation window but show me other ways to activate is still greyed out. I've disabled the NIC on this Hyper-V server and I still can not get the other way to activate to show up... Anyone have any ideas? This computer is one of my AD servers so.. it being in notification mode kind of sucks. Thanks.

    Read the article

  • Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

    - by Bjørnar Kibsgaard
    I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

    Read the article

  • Battery issues on Dell Inspiron XPS14z Ultrabook

    - by querolus
    I'm new in the Ubuntu world. I just bought a Dell Inspiron XPS 14z Ultrabook and installed Ubuntu to dual boot with Windows thanks to the Ubuntu Secured Remix package. Everything works fine except the battery. I have, at most, 1h 30' battery life. With windows it can last more than 3h. Moreover, and I guess it's related to the battery issues, the fan is constantly running at high speed while it does not when working with windows. Do you know where can be the problem?

    Read the article

  • Boots to a totally blank screen after I installed some ATI Radeon card updates

    - by baboonWorksFine
    I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

    Read the article

  • GRUB install error

    - by Rohit
    Whenever I try to install Ubuntu, I get a fatal error that reads: 'Executing'grub-install /dev/sda' failed. This is a fatal error.' Its the same as this, but my graphics appear to be running fine. Also, I'm a complete novice at this and really need simple instructions to understand what I'm doing. I've tried booting from a LiveCD and a USB stick. I don't want to dual boot it because its an old computer that I erased XP and plan on only using Linux on it. When I used a USB stick and set the persistent file storage high, I was able to run it, but only as long as the flash drive was plugged in.

    Read the article

  • Lexmark X7170 shows documents as printed when they haven't

    - by Mehmet
    I made the move from Windows 7 to Ubuntu not dual booting because I have decided to quit gaming to spare more time for my studies. I just needed an OS for browsing the web and word processing etc. After I installed Ubuntu I installed the AMD GPU drivers, after which I clicked on the little printer icon, selected add printer and it found the drivers for the Lexmark 7000 series and I installed them. Now my problem is when I print something from Writer it processes it thinks its completed it, when in fact it hasn't printed anything. I tried printing a test page but it was stuck on processing for 5 minutes. I have restarted my computer and turned the printer on and off. I'm running 64bit if that changes anything.

    Read the article

  • Ubuntu 13.10 gets stuck on boot

    - by Robert frost
    I have updated (via the Software Updater) Ubuntu 13.04 to Ubuntu 13.10. After it had finished the installation, the system required a reboot. When I reboot and load Ubuntu it will get stuck on the logo. I managed to boot into the recovery (both console and graphics mode) but I can't figure out how to repair it. I have tried a sudo update-grub, but nothing different happened. I have also tried sudo apt-get install gnome, but the same result... I am using a dual-boot Win7 + Ubuntu.

    Read the article

  • How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

    - by igoryonya
    I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

    Read the article

  • how to change dolphin's select region of a file/folder (in detail view mode)

    - by Daniel
    Since nautilus has removed the dual pane. So I turn to dolphin. I am wondering how to change the default select behavior in detail view mode? Now to select a file/folder, my cursor has to hover over that file/folder and then the left click will take effect, but I much prefer the nautilus way, that is as long as your cursor is in the same row of that file/folder, left click picks up that item. This I think is more robust for user selection, it is faster. Any ideas how to achieve this in dolphin?

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Fresh install of 12.04 Kernel panic

    - by user70260
    I am attempting to install Ubuntu 12.04 on my computer. After the Ubuntu splash screen, the computer throws up this error: sr 2:0:1:0: [sr0] Unhandled error code Kernel panic - not syncing: Attempted to kill init! PID: 1, comm: run-init Not Tainted 3.2.0-23-generic #36-Ubuntu The computer hardware is as follows: Core 2 quad 9400, 8gb RAM, GTX 275, 3 Mech HD, 2 SSD, Win 7 install. I would like to dual boot Ubuntu on this computer if possible. I did try placing this disk in my laptop and booted successfully which leads me to believe the fault lies with the desktop. Under windows all hardware seems to work ok. Any ideas?

    Read the article

  • Wifi works perfectly on Windows, but drops on Ubuntu

    - by alecRN
    I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >