Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 112/170 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• What are my options for booting OSX 10.6 when my DVD drive is broken?

  - by Kev

  I'm about to completely re-pave my Mac Mini but the DVD drive has died on me which means I can't boot from the installation media. I know I can boot from a USB stick but I don't have one available, what are my options given the following hardware at hand? Netgear ReadyNAS Duo NAS (NIC or USB only, no Firewire) USB HDD (no Firewire) I've ripped an ISO of the installation disk, can I somehow get the Mini to boot from this image using one of the above? If I decide not to re-pave but just upgrade, can the Mac be upgraded just using an OSX 10.6 ISO image on its disk?

  Read the article

• What environmental factors do you believe contribute to productivity?

  - by Pemdas

  From the perspective of a developer what do you consider to be the most important environmental factors or work place perks/policies that contribute to increase productivity? For example, my top four includes the following: No internet restrictions - Because honestly ever few hours I need a 15 min deload, which usually involves checking my gmail account and or browsing a few choice site. Personal office with a door - for obvious reasons Dual monitors - do people really develop software with one monitor still? Flexible hours - This could be interpreted in different ways, but basically I really appreciate that fact that I can roll into work at 7am, 11am or whenever and the time police aren't on my back. It is just understood that I will put in my 8 hours or more if needed and get my job done however that works out.

  Read the article

• All files erased after installing ubuntu 11.04 alpha 3

  - by wifi

  Yeah I know I should have backed up my files before proceeding, I completely forgot. Well, the thing is that I had a dual-boot system with Windows 7 and Ubuntu 10.10. Yesterday, I installed Ubuntu 11.04 alpha 3 (through live USB). I chose that 11.04 would install over 10.10 on the installation wizard, where I have no important files. However, it overwrote Windows too, and its data. Is there some way to recover it? Thanks!

  Read the article

• kubuntu 12.04 runs slowly

  - by randy

  i have a 3ghz amd 64 dual core am3 socket processor, asus mom board, 4GB ram, 8800GTS nividia video card with 500MB ram. installed kubuntu 12.04 and very laggy. select menu and 20 seconds later the menu pops up. i switched to classic menu and that seemed to help. what direction should i look first to get this running better? video perhaps? i had ubuntu 11.04 on this machine previously and had no problems with speed.

  Read the article

• screen saver issue

  - by Steven

  When i leave my pc alone for while the screens turns black which is fine, when i return and move my mouse it comes back on but my second screen stays black and my first screen has a blue overlay over the top of the unlock screen. I believe this is to do with my dual screens on gts450. screen 1 is 1920*1080 screen 2 is 1024*768 the blue over lay is on screen one and looks to be the size of screen 2 I can out the password in and press enter and then everything goes back to normal, but how do i fix this issue of a blue overlay stopping me seeing whats on screen.

  Read the article

• Install Ubuntu on iMac 21.5" (mid 2011)

  - by Mystic Mark le Maverick

  I has a dual boot system with MacOSX 10.8.2 and Microsoft Windows 7 Home Premium x64. I would like to install Ubuntu alongside the two existing operating systems for cross platform development purposes. My System specs are listed below. iMac 21.5-inch (mid 2011) Intel Core i7 @2.80GHz AMD Radeon HD 6770M Facetime HD Internet Camera Thunderbolt port Wireless Airport adapter card Apple 8x Superdrive Apple Magic Mouse and wired keyboard with numeric keypad Will rEFIt install properly on my machine too? Thanks you very much for the help.

  Read the article

• unable to boot from live USB!

  - by ramblinman

  Linux noob here. I was messing around with my new dual-boot (win7 and the latest ubuntu, 12.04 I think?) Long story short, I deleted some partitions that I shouldn't have. When I boot up the machine, I get: error: no such partition. grub rescue _ I know that I could probably fix this by booting from the live USB. But I can't boot from the live USB either! On startup, I can get "boot from drive" options by pressing F12. (This is how I installed Ubuntu in the first place.) But when I select the USB drive, I get this error: error: no such device: [long string of letters and numbers]. grub rescue _ I've searched around for a fix but most threads addressing the first problem suggest booting from live drive. And I can't do that! Any help much appreciated.

  Read the article

• How do I access an external hard drive plugged into my router?

  - by Shawn

  I am running Ubuntu 11.10 and I own a Netgear N600 Wireless Dual Band Router with a USB port built into it. Naturally, the router came with instructions on how to mount and view this drive with both Windows and Mac, but nothing about Linux. I have an WD Elements 1 TB external HDD that I would like to plug into the router and share across my home network. However, when I plug it in, absolutely nothing happens on my desktop. I checked on two different machines and nothing seems to indicate that the drive has been mounted (or is even seen at all) on either machine. I am fully aware that it may not be possible to do this with a Linux system, but I was hoping someone might have a suggestion. Thanks!

  Read the article

• HP Bluetooth Mouse Connection Problems

  - by Arthur Upfield

  About a month ago, I turned on my laptop (Ubuntu 14.04 and Windows 8.1 dual boot, though the mouse works fine in Windows), logged in and connected my HP x4000b mouse via a bluetooth dongle (Kinivo BTD-400), and noticed that the battery indicator in Ubuntu said that the mouse battery was at 0%. The day before it was around 30%, so I decided to just change the batteries in the mouse, but after reconnecting with the new batteries, it still said 0%. The mouse connected and worked just fine, so I didn't think much of it. About a week after that, I noticed that my mouse would sometimes disconnect if I didn't use it, but since reconnecting isn't that hard I just decided to leave it. Now it also won't reconnect unless I log out and back in again, which is getting sort of tedious. Is there any way to fix this issue? Any help is appreciated, and I will try and respond to questions ASAP. Thanks.

  Read the article

• disable intel gpu in ubuntu 12.04

  - by small_potato

  I am wondering if there is anything to disable the intel gpu on ubuntu 12.04. I want to be able to setup dual monitor using nvidia-settings. It seems the intel gpu is used for display as suggested by sudo lshw -c display the output is *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:c0000000-c0ffffff memory:90000000-9fffffff memory:a0000000-a1ffffff ioport:4000(size=128) memory:a2000000-a207ffff *-display description: VGA compatible controller product: Haswell Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:c2000000-c23fffff memory:b0000000-bfffffff ioport:5000(size=64) I have a lenovoY410 with GT750M. It seems there is no way to turn off the intel gpu in bios either. Help please. Thanks.

  Read the article

• re-partition new drive and use new partition as 'home'

  - by vector

  Linux noob here. I installed Ubuntu 12.04 on a brand new drive (dual boot with windows on another drive) and re-partitioned it afterwards (with gparted off of live cd) like so (sudo fdisk -l) : Device Boot Start End Blocks Id System /dev/sdb1 * 2048 63735807 31866880 83 Linux /dev/sdb2 1448509438 1465147391 8318977 5 Extended Partition 2 does not start on physical sector boundary. /dev/sdb3 63735808 1448507391 692385792 83 Linux /dev/sdb5 1448509440 1465147391 8318976 82 Linux swap / Solaris I'd like to use sdb3 as default home for all work and fun related program installs and files, but I haven't even gotten as far as changing permissions on it. Any help will be most appreciated.

  Read the article

• Iptables port mapping from two PCs to one

  - by Anton

  We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

  Read the article

• 3TB non-boot hard disk on older motherboard

  - by Bcos

  It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

  Read the article

• Screen sometimes inverts after locking

  - by hackedd

  Sometimes, when I wake up my computer from a screen lock, one of my screens is inverted. It does not always happen (maybe one in ten times) and it is not always the same screen. Re-locking and unlocking the screen a couple of times fixes the colors again. I have a dual monitor setup on an ATI Radeon HD 3450, using two HP screens connected over DVI. I am using the radeon driver, and according to jockey there are no additional drivers available for my system. Any ideas as to why this happens?

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• Out of range on shut down, Log Out, Restart and Suspend

  - by user52889

  I have looked extensively on the help forums but haven't found a similar problem. Whether I want to Shut Down, Restart, Log Out or Suspend, as soon as I select my desired option the screen goes black with a message (Out of Range displayed in the middle of the screen. No combination of keys frees the screen and I have to manually hold the power button on my PC to shut it down. There is no problem on start up. My computer is a dual boot with Windows 7.

  Read the article

• Looking for an open source real-time network analysis program

  - by JrSysAdmin

  Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• Iomega Home Media Network Hard Drive 1TB Cloud Edition failed, data recovery?

  - by lonbon69

  I have a Iomega Home Media Network Drive Cloud Edition 1TB that started clicking and then displayed a failure LED code Power LED and Red LED. I removed the SATA drive and inserted in a 'All in 1 HDD Docking Station' and connected to laptop by USB - Laptop has Win 7 OS. The dock is seen as drive E but cannot access and says 0% data etc. The drive does spin up when I power the dock. Web searches say the drive has EXT3 file system and to use Ubuntu to access drive. I have now setup a dual boot laptop but still do not see the drive using ubuntu. Is there something else I need to do to get it recognised etc. I really would like to recover the data, any suggestions please?

  Read the article

• Windows 7 with Ubuntu Problems HP

  - by Brian

  I have a HP e9300z, Have Windows 7 on it currently. x64 bit. I wish to Dual Boot Ubuntu with Windows 7, when i do the windows setup , do not even get the options to Install Alongside with, Just install or Something else. Someone in another forum said something with the HP BIOS, can not find where to change anything. So what do i have to do so Ubuntu sees my HDD with Windows? Manually make partition? Only have 1 partition my C: Windows. Thanks.

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• How can I run everything as root

  - by Hermione

  I have dual booted to lubuntu (with Windows XP) and everytime and then I'm getting asked for my password. How do I run everything as root and not ask a password again? Ideally I wanted to run nginx but it has permission denied issues: apathetic@ubuntu:~$ service nginx start Starting nginx: nginx: [alert] could not open error log file: open() "/var/log/nginx/error.log" failed (13: Permission denied) 2012/08/03 20:06:25 [warn] 4762#0: the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /etc/nginx/nginx.conf:1 nginx: the configuration file /etc/nginx/nginx.conf syntax is ok 2012/08/03 20:06:25 [emerg] 4762#0: open() "/var/run/nginx.pid" failed (13: Permission denied) nginx: configuration file /etc/nginx/nginx.conf test failed

  Read the article

• Can I get some advice on graphics cards please?

  - by Victor9098

  I know that Steam for linux is on the way and have been seen a lot of games appearing in the Ubuntu Software Centre of late but my system lacks a decent graphics card and was hoping I could get some recommendations. The desktop is a Packard Bell Imedia S1800 (or Imedia D3526 UK) with the following specs; Memory: 3.8 GiB Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz × 2 The system lists the graphics as 'unknown', though I think its just an integrated Intel card From what I can see there is a free PCI-E x16 slot. Any advice would be great, thanks!

  Read the article

• How to re-partition?

  - by EDi

  I switched from Windows to Ubuntu 4 months ago and I am really happy with it. I set up a dual-boot system (since I wasn´t sure how it will end up with me and Ubuntu). After merging from Citavi to Zotero I need windows only for my scanner. The problem I have now is, that the windows partion is so big with lots of unused space and the ubuntu partition are quite small - I should have though about this problem 4 months ago... My partitions look like this: Where sda3 is the windows partition, sda5 is Ubuntu and sda7 is a data partition. I want to shrink sda3 and free some space for sda5 and sda3. How can this be done safely (and easily)?

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >