Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 110/170 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Ubuntu freezes when gdm starts

  - by Enrique

  I have Ubuntu 10.10 (upgraded from 10.04) I was browsing in Firefox yesterday, then the PC suddenly did a reset Once it restarted, everything went normal until gdm begun showing. Then everything froze and locked when userlist showed. I can't move mouse pointer nor do anything with keyboard at this point (just after userlist shows in gdm). PS: Both, mouse and keyboard work fine, because this Ubuntu is dual-booting with a Windows XP install which loads/works fine. Here is my .xsession-errors file, but I don't have a clue what may be wrong. Thanks http://pastebin.com/GVtneEAF

  Read the article

• NATing with a single-homed machine possible?

  - by Harry

  I have the following setup: a) a single-homed machine, A, that can see the Internet. b) other machines B, C, and D that cannot see the Internet. c) A, B, C, and D can see each other. d) all machines are running either RHEL 5.3 or Fedora 16. Question: Is it possible to have B, C, and D share the Internet connection with A somehow? Note, again, that machine A does not have a second NIC installed. (The solutions that I am finding on the Net assume A to be a dual-homed system!) Also, could you please recommend a set of book(s) or online resources for a current and in-depth coverage of iptables for people with only a basic knowledge of TCP/IP?

  Read the article

• High temperature on my laptop with Radeon Mobility HD4670

  - by Lorthirk

  As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

  Read the article

• System checks for disk drive error every time it boots

  - by Starx

  When my disk space for the ubuntu installation partition was getting low, from a live cd, I used gparted to increase its volume capacity, but deleting another partition and merging it to the ubuntu partition. Since then onwards, I am receiving disk checking for errors at boot screen for my partitions, always. What seem to be causing this and how to fix it? Update Here is my boot.log if it provides few insight fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda1 was not cleanly unmounted, check forced. ubuntu: clean, 501325/1310720 files, 2958455/5242880 blocks /dev/sda1: 241/51272 files (3.3% non-contiguous), 73541/102400 blocks mountall: fsck /boot [358] terminated with status 1 Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox ... /dev/sda1 is a separate grub partition for my dual OS's

  Read the article

• Asus 1001P freezes after chaging network settings

  - by auntiquarian

  I'm running Ubuntu 11.04 on a Asus PC 1001P in a dual boot environment with XP. All has been running fine for several weeks, but: I've just changed ISP (from Tiscali to BT), and had already sorted out connection, registration, etc. on a Dell laptop. On the Asus I went into Ubuntu to alter the wireless network details (i.e. selected the new network, and entered the password). Ubuntu immediately started running slowly, and after rebooting it now freezes when it gets to the Ubuntu logo and gets no further. Please help, lovely Ubuntu experts.

  Read the article

• Windows Server 2003: Router, DHCP, Loses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Algorithm to increase odds of matching when randomly selecting

  - by Bryan

  I am building a mobile game loosely based on dual n-back http://brainworkshop.sourceforge.net/tutorial.html Now with the game I have 9 squares (numbered 1 through 9) and 9 letters (A through K) In the current code, I randomly select a square (e.g. 3) and a letter (e.g. C), then repeat the random selection for the next turn. For 1-back, I test whether either, neither or both match the previous turn. The problem with my current code is I get very few matches - I can go through many turns without having either match. How can I increase the match frequency, or alternatively decrease the randomness so a match is more likely? I am not looking for specific code (but pseudo-code would be fine) - just more an approach to increase match frequency.

  Read the article

• Connecting to a Windows SVN server from Ubuntu

  - by skytreader

  I need to access an SVN repo hosted on a Windows machine from Ubuntu. However, even if I supply the proper credentials, it denies me access, apparently because Windows does not allow Linux connections (as they told me); sure enough, I got in when I tried to checkout from my XP partition. While I have my box dual-booted, it is inconvenient to switch just for SVN. So, does anyone know how I can access that SVN repo from Ubuntu? I've tried installing TortoiseSVN and Windows Subversion under Wine but I can't even get them to run; they were asking for some DLLs that I don't know how to supply. I've thought of installing a virtual XP just for SVN but I consider that too extreme and I'd be glad if anyone can advise a simpler workaround.

  Read the article

• Changing Workspaces changes active window

  - by puk

  I have a dual monitor setup, but I am sure it's the same with a single monitor. If I have two applications open, one is vim, the other is google chrome. Lets say the focus is on vim. If I switch to another workspace (ie. alt3) then switch back to that workspace (ie. alt1) now the focus is on google chrome. This process toggles indefinitely so long as I don't transition too quickly. Is there any way to prevent/disable this?

  Read the article

• Can't boot ubuntu on Lenovo V570

  - by Aaron

  I recently tried to install Ubuntu on my new Lenovo V570, planning to dual boot 11.10 with Windows 7. I realized after installing that it would boot straight into Windows, so I looked up the issue. I read something about UEFI, and found a page suggesting that I wipe the drive with GParted, installing a msdos partition table, and then install Ubuntu. (I tried linux mint first, because that's what I had on my flash drive at the moment.) I attempted this, and now I'm left with a computer that won't boot anything from the hard drive. If I install Ubuntu or Linux Mint 12 using either MSDOS or GPT, it simply skips the hard drive. My BIOS has no option to disable EFI, and I'll admit I know shamefully little about EFI or different types of partition tables. I'd like to know what I have to do to make my computer boot again.

  Read the article

• nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

  - by rlemon

  I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

  Read the article

• Unable to install Steam 64bit - Wrong architecture (Lubuntu 12.04)

  - by Ian

  I'm on a new install of Lubuntu 12.04 on an Acer Aspire 5534 (specifications here, tl;dr: AMD dual-core 64bit) trying to install steam_latest.deb from the Steam website. When I open gdebi to install, it tells me that it's uninstallable because it's for a i386 architecture. I've tried installing ia32-libs (installed, no success), gdebi --add-architecture i386 (with and without --force, command unknown). This is all I've found to fix the problem, but none of it has worked for me. Any suggestions are welcome, thanks for your time.

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Rebooting yes, Shutdown no

  - by Chiotis Leonidas

  Hello everyone and thanks in advance. I am new in Ubuntu and have the 12.04 version dual boot with Windows XP. I have the following problem. The laptop can reboot using the reboot option from the menu but it cannot shut down. It starts shutting down, the dots appear but then it freezes and does not turn off. Sometimes it shuts down normally (usually just after an update) but then it loses that capability again. Some strange things, I noticed that when the dots freeze, the USB mouse loses power, BUT the usb-powered cooling pad continues to work The only Fn shortcuts that work all the time are the Volume up, down and mute, BUT sometimes when the other Fn combinations (screen-off etc) work the computer shuts down normally I searched a lot on my own, please help.

  Read the article

• Missing launcher, top panel without icons, an ATI driver problem?

  - by jlotero

  After upgrading to Ubuntu 11.10, the following problems occurs when accesing in ubuntu mode (3D): the launcher is missing, top panel without icons on the right side, and I can only restart with Terminal (Alt-T and then sudo reboot). No problems in 2D. It occurs on my PC with AMD Athlon (tm) II X4 640 Processor, Radeon HD5670 and both with the 32-bit and 64 bits versions of Ubuntu. Both versions work well on an older PC with AMD Athlon 64 x2 Dual Core 4200 + processor, and an Nvidia integrated graphics card (C61 GeForce 6150SE nForce 430). Could it be a problem with the ATI driver?

  Read the article

• No options for sound output

  - by Chef Flambe

  Newbie here. Trying out Ubuntu for kicks. I have a 10.04 Ubuntu system dual booting on my Windows 7 laptop, fully updated, an Asus A53S. I have an external Samsung monitor/tv hooked up via HDMI. I'm getting sound from the external monitor fine when using Win7 but can't get anything with Ubuntu. I've read threads here about similar stuff and they say go check my sound options but I don't have any additional options than the one listed - Internal Audio. What else can I check/do?

  Read the article

• Lost connectivity after configuring multiple network adapters on separate networks

  - by Dave Long

  I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

  Read the article

• Strange RDP / Remote Desktop problem

  - by John Landheer

  I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

  Read the article

• display port on x230 not workgin

  - by Aaron

  having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

  Read the article

• Wubi doesn't install Ubuntu

  - by Nick

  I've tried 4 times on 2 different computers. After downloading wubi, and installing Ubuntu inside Windows XP, I restart and get the dual boot screen. I choose Ubuntu, and then nothing, my screen flashes for a few minutes with the Ubuntu colors. I restart and go to Ubuntu recovery, where it says "shadow passwords now on" and "clock off by a day-Fixed". I restart to only get the same thing, but Xubuntu, in stalled on one, but it's Ubuntu I want to try. Any thoughts ??

  Read the article

• Wordpress Multisite (Subfolders) - Google Analytics Tracking

  - by mmundiff

  I have a Wordpress multisite subfolder instance that I would like to track via Google Analytics. I guess optimally this would be a plugin which I could track each site in two places The Main Tracking Code which totals all traffic from the Multisite instance The Individual Site tracking code to see how each site specifically is doing. I think this plugin would have worked for me if I had a subdomain multisite instance: http://wordpress.org/extend/plugins/google-analytics-multisite-async/installation/ I know I can manually place the dual tracking code (http://www.markinns.com/articles/full/adding_two_google_analytics_accounts_to_one_page) but that would involve editing a theme and I have multiple sites using TwentyEleven template. I don't think I can edit the theme and not have it wreak havoc on the rest of the sites using TwentyEleven. So has anyone done this? Is there a a technique I'm missing? Is there a plugin available to do this in Multisite Subfolder installations? Is there a way to manually insert GA codes into themes which are used by multiple sites? Any insight is appreciated.

  Read the article

• controlling the bandwidth using tc

  - by Supratik

  Hi I have two NIC etho is connected to the internet and eth1 is connected to the LAN. I want to restrict the download limit using iptables and linux tc. So I wrote a test script to verify if it is working. My iptables configuration is as below. iptables -t mangle -N INBOUND iptables -t mangle -I PREROUTING -i eth0 -j INBOUND iptables -t mangle -A INBOUND -j MARK --set-mark 60 My ingress configuration is as below. tc qdisc add dev eth0 handle 1: ingress tc filter add dev eth0 parent 1: protocol ip prio 1 handle 60 fw police rate 100kbit burst 20kbit drop flowid :1 Can you please tell me what I am missing here ?

  Read the article

• Ubuntu 12.04 Battery problem

  - by Rahul

  I have my laptop ( Dell Inspiron 14R) on dual boot with Ubuntu 12.04 and Windows 7. While using Windows 7, I used to get about 2.5-3 hours on battery fully charged (with my cellphone connected for 3g Internet). The battery is almost 2 years old. But in Ubuntu 12.04, I'm getting only about 1-1.5 hrs on battery. I tried installing jupiter, also tried some tweaks that were mentioned in the forums, like editing the grub file. But nothing seems to work. I am not sure if any app is draining the battery. The one application that I use always is firefox. It's always open. Is there any way I could get at least 2.5 hrs of battery time?

  Read the article

• windows system (bootloader) partition accidently deleted during multiple installs

  - by S.Y.T.

  After experimenting with multiple variations of backtrack and xbmcbuntu variations of Ubuntu with dual boot successfully, my windows partition became unrecognizable to grub. I used my windows boot CD to try to correct the problem. However, I deleted all partitions except for the NFTS one that contains my old windows install. (And, merged all other ones into that in hopes of getting back to the windows boot loader and out of grub) Now, all I get is a grub command prompt when I try and boot the system (how??? - I thought I deleted grub) And, now the windows boot disc doesn't even recognize the install. I've tried TRK to try and resolve the problem. Though I must admit ignorance in correctly using this utility. I've searched for other answers to this problem. Any help would be much appreciated. S.Y.

  Read the article

• Why don't 12.04 Nvidia drivers work on my GeForce 6150 LE?

  - by Chris

  I got a slimline s7600n and of course i put ubuntu 12.04 on it. Im using recommended proprietary drivers and they are just not working to well. My monitor is 1366x768 but it will only do 1360x768 and minecraft barely runs at all. Besides that everything is fine. But i gota play minecraft! help! lol Thanks. :) Other specs is cpu amd athlon 64 dual core 2ghz ram 1 gig vid is 256mb 64bit Not sure what other info yall need.

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >