Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 314/402 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• Moving while doing loop animation in RPGMaker

  - by AzDesign

  I made a custom class to display character portrait in RPGMaker XP Here is the class : class Poser attr_accessor :images def initialize @images = Sprite.new @images.bitmap = RPG::Cache.picture('Character.png') #100x300 @images.x = 540 #place it on the bottom right corner of the screen @images.y = 180 end end Create an event on the map to create an instance as global variable, tada! image popped out. Ok nice. But Im not satisfied, Now I want it to have bobbing-head animation-like (just like when we breathe, sometimes bob our head up and down) so I added another method : def move(x,y) @images.x += x @images.y += y end def animate(x,y,step,delay) forward = true 2.times { step.times { wait(delay) if forward move(x/step,y/step) else move(-x/step,-y/step) end } wait(delay*3) forward = false } end def wait(time) while time > 0 time -= 1 Graphics.update end end I called the method to run the animation and it works, so far so good, but the problem is, WHILE the portrait goes up and down, I cannot move my character until the animation is finished. So that's it, I'm stuck in the loop block, what I want is to watch the portrait moving up and down while I walk around village, talk to npc, etc. Anyone can solve my problem ? Or better solution ? Thanks in advance

  Read the article

• Wifi - wireless network not working after installing Ubuntu 12.04

  - by Nilesh

  I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

  Read the article

• Getting the PC speaker to beep

  - by broiyan

  There has been much written on getting the beep sound from Ubuntu releases over the years. Example: fixing the beep My needs are slightly different in that I do not want to ensure sound card beeps are functioning. Instead, I want PC speaker beeps, the kind produced by the original built-in speaker because I believe they will produce less CPU load. I have confirmed that my computer has the PC speaker by unplugging the external speakers and shutting down Ubuntu. At some point in the shutdown and restart process a beep is heard even though the external speakers have no power. I have tried the following: In /etc/modprobe.d/blacklist.conf, turn these lines into comments: #blacklist snd_pcsp #blacklist pcspkr In .bashrc /usr/bin/xset b on /usr/bin/xset b 100 Enable in the gnome terminal: Edit Profile Prefs General Terminal Bell Ensure no "mute" selections in: System Prefs Sound various tabs (uncheck them all). Select "Enable window and button sounds" in: System Prefs Sound Sound Effects In gconf-editor desktop gnome sound, select the three sound check boxes. In gconf-editor apps metacity general select the audible bell check box. Still I get no PC speaker beeps when I send code 7 to the console via my Java program or use echo -e '\a' on the bash command line. What else should I try? Update Since my goal is to minimize load on the CPU, here is a comparison of elapsed times. Each test is for 100,000 iterations. Each variant was performed three times so three results are presented for each. printwriter.format("%c", 7); // 1.3 seconds, 1.5 seconds, 1.5 seconds Toolkit.getDefaultToolkit().beep(); // 0.8 seconds, 0.3 seconds, 0.5 seconds try { Runtime.getRuntime().exec("beep"); } catch (IOException e) { } // 10.3 seconds, 16.3 seconds, 11.4 seconds These runs were done inside Eclipse so multiply by some value less than 1 for standalone execution. Unfortunately, Toolkit's beep is silent on my computer and so is code 7. The beep utility works but has the most cost.

  Read the article

• Best of OTN - Week of November 4th

  - by CassandraClark-OTN

  It was another exciting week at OTN!  Lots of GREAT content to share.  If you had a favorite that you don't see listed let us know in the comment section below.  Java Community - JavaOne Sessions Online - We've posted 60 of the JavaOne sessions online, and we'll be rolling out more sessions every few weeks. This content is free, courtesy of Oracle.NetBeans 7.4 Released  - NetBeans 7.4 features HTML5 integration for Java EE and PHP development; support for Apache Cordova and JDK 8 preview features; enhancements to Maven, C/C++, and more.vJUG: Worldwide Virtual JUG Created - London Java Community leader and technical evangelist Simon Maple has created a Meetup called vJUG, with aim toward connecting Java Developers in the virtual world.Tori Wieldt, Java Community Manager Friday Funny: This is what REALLY happens when you give someone your business card ow.ly/q6aKUArchitect Community - Don't forget to register for the free Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.  December 3rd, 2013 - Two great tracks, Design & Develop and Build, Deploy & Manage.   Why wait, register now!  Multi-Factor Authentication in Oracle WebLogic - Shailesh K. Mishra - Really good technical article on using multi-factor authentication to protect web applications deployed on Oracle WebLogic.Coherence*Web: Sharing an httpSessions Among Applications in Different Oracle WebLogic Clusters - Jordi VillenaUnderstanding when and how to select session attributes that must be stored in the local storage of the Oracle WebLogic instances and which should be leveraged to an Oracle Coherence distributed cache.  Bob Rhubart, Architect Community Manager Friday Funny - "Be yourself, everyone else is already taken." Oscar Wilde (October 16, 1854 - November 30, 1900) Irish writer and poet.

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• xorg-edgers PPA with llvmpipe breaks AMD APU system

  - by linux_RRT

  I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

• Windows 7 and Ubuntu Boot/Corruption Problems

  - by Kiraisuki

  I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

  Read the article

• Sound in Ubuntu 12.10 on Chromebook

  - by Paul Mennega

  I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

  Read the article

• How do I install 10.04 on a Vortex86DX embdedded system?

  - by mathematician1975

  I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

  Read the article

• First Installation

  - by Dj Zia

  I had windows xp on my desktop originally. Yesterday we were able to replace this with Ubuntu 12.04 from a thumb drive. The live CD did not work. I am more familiar with the system they introduced me to in School recently. Linux pretty much has similarity all around so I am finding the differences not as much of an issue. So, there were a few issues with the installation and getting Grub to start working. There is the low graphics issue which brings us to the command line basics. I am a little familiar with linux so it isn't too intimidating; I am really good with step by step instructions in simple order. My question is Ubuntu installed with out any basic driver's or generic header's. It also is not connecting my computer to the internet. My system is older not new. For the time it had above average parts. How do I solve the problem of Getting the header's, making sure the right configurations are set, and where do I get the driver's for my white box desktop to run Ubuntu properly? Thank you

  Read the article

• How do I prevent my platformer's character from clipping on wall tiles?

  - by Jonathan Hobbs

  Currently, I have a platformer with tiles for terrain (graphics borrowed from Cave Story). The game is written from scratch using XNA, so I'm not using an existing engine or physics engine. The tile collisions are described pretty much exactly as described in this answer (with simple SAT for rectangles and circles), and everything works fine. Except when the player runs into a wall whilst falling/jumping. In that case, they'll catch on a tile and begin thinking they've hit a floor or ceiling that isn't actually there. The player is moving right and falling downwards. So after movement, collisions are checked - and first, it turns out the player character is colliding with the tile 3rd from the floor, and pushed upwards. Second, he's found to be colliding with the tile beside him, and pushed sideways - the end result being the player character thinks he's on the ground and isn't falling, and 'catches' on the tile for as long as he's running into it. I could solve this by defining the tiles from top to bottom instead, which makes him fall smoothly, but then the inverse case happens and he'll hit a ceiling that isn't there when jumping upwards against the wall. How should I approach resolving this, so that the player character can just fall along the wall as it should?

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Creating an update method in a different class

  - by Sweta Dwivedi

  I have created a class called 3D model which will animate my 3D model by changing the model position according to the values based in a .txt file through a list... Since i'm using a foreach loop to read the point values when it reaches the end of the file.. XNA throws an out of bounds exception .. (which is obvious) but if i add the same code in my Game.cs update(gameTime) method.. then i dont have this problem..Any idea how to make my 3D model update work same as the update in game.cs .. Here is the code for some idea: public void patterns(GameTime gameTime) { motion_z = new List<Point3D>(); if (pattern == 1) { f = "E:/Motion_Track-output/Output1.txt"; } if (pattern == 2) { f = "E:/Motion_Track-output/cruse.txt"; } // TODO: Add your update logic here using (StreamReader r = new StreamReader(f)) { string line; //Viewport view = graphics.GraphicsDevice.Viewport; int maxWidth = view.Width; int maxHeight = view.Height; while ((line = r.ReadLine()) != null) { string[] temp = line.Split(','); int x = (int)Math.Floor(((float.Parse(temp[0]) * 0.5f) + 0.5f) * maxWidth); int y = (int)Math.Floor(((float.Parse(temp[1]) * -0.5f) + 0.5f) * maxHeight); int z = (int)Math.Floor(((float.Parse(temp[2]) / 4 * 20000))); motion_z.Add(new Point3D(x, y, z)); } modelPosition.X = (float)(motion_z[i].X); modelPosition.Y = (float)(motion_z[i].Y); modelPosition.Z = (float)(motion_z[i].Z); i++; } //Console.WriteLine("modelposX:" + modelPosition.X + "," + "motionzX:" + motion_z[i].X); }

  Read the article

• Is there such thing as a "theory of system integration"?

  - by Jeff

  There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

  Read the article

• Java Slick2d - Mouse picking how to take into account camera

  - by Corey

  When I move it it obviously changes the viewport so my mouse picking is off. My camera is just a float x and y and I use g.translate(-cam.cameraX+400, -cam.cameraY+300); to translate the graphics. I have the numbers hard coded just for testing purposes. How would I take into account the camera so my mouse picking works correctly. double mousetileX = Math.floor((double)mouseX/tiles.tileWidth); double mousetileY = Math.floor((double)mouseY/tiles.tileHeight); double playertileX = Math.floor(playerX/tiles.tileWidth); double playertileY = Math.floor(playerY/tiles.tileHeight); double lengthX = Math.abs((float)playertileX - mousetileX); double lengthY = Math.abs((float)playertileY - mousetileY); double distance = Math.sqrt((lengthX*lengthX)+(lengthY*lengthY)); if(input.isMousePressed(Input.MOUSE_LEFT_BUTTON) && distance < 4) { if(tiles.map[(int)mousetileX][(int)mousetileY] == 1) { tiles.map[(int)mousetileX][(int)mousetileY] = 0; } } That is my mouse picking code

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• Cursor seems to freeze in the first attempt of typing - Unity 3D, 12.04

  - by Denis

  It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Update 1: the cursor is blinking normally before I start typing. After the first character (which is not showed), seems to freeze, taking 5 seconds to get normal again. Very annoying, specially when you want to access login sites. Update 2: I tested on a different and old machine (Athlon 64 4800 x2, 4Gb ram, no problems - takes 2 seconds, acceptable. I think it could be related to my specific hardware (Samsung RV415), but not sure about it. Anyone experiencing something similar? Is that what I should expect, or can be fixed or improved? Thanks.

  Read the article

• Alpha From PNGs Butchered

  - by ashes999

  I have a pretty vanilla Monogame game. I'm using PNG for all my sprites (made in Photoshop). I noticed that XNA is butchering the aliasing; no matter what I do, my graphics appear jaggedy. Below is a screenshot. The bottom half is what XNA shows me when I zoom in 2X using a Matrix on my GraphicsDevice (to make the effect more obvious). The top is when I pasted the same sprites from Photoshop and scaled them to 200%. Note that partially transparent pixels are turning whiteish. Is there a way to fix this? What am I doing wrong? Here's the relevant call to draw to the SpriteBatch: spriteBatch.Draw(this.texture, this.positionVector, null, Color.White, this.Angle, this.originVector, 1f, SpriteEffects.None, 0f); (this.positionVector can easily be Vector.Zero; Color.White as 100% alpha, I think; this.Angle can be a real angle (small > in the image) or zero (the orb itself).

  Read the article

• CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate

  - by ETC

  If you’re one of the less fortunate (namely those forgotten by their carrier when it comes to phone OS upgrade time) you’ve got a friend in Cyanogen. They’ve rolled out a new Release Candidate update that includes Android 2.3 and a host of performance tweaks. First thing to note is that this is an RC and if you upgrade from CyanogenMod 6 to CyanogenMod 7 RC you’ll be trading a little bit of stability and a few features that haven’t made the jump from 6 to 7 in return for the newest features of Android 2.3. If you’re not comfortable with that wait for CyanogenMod 7 to update to a final release. For the intrepid, hit up the link below to read more and grab a copy. CyanogenMod-7 Release Candidates! [Cyanogen via Download Squad] Latest Features How-To Geek ETC Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents

  Read the article

• What to expect when creating a style guide?

  - by ted.strauss

  My organization would like to create a full fledged style guide that will be applicable to internal & external web sites, print advertising, trade show design, and overall branding. This article lays out the scope we're aiming for, and has links to many great examples style guide PDFs. The goal is to create a style guide comparable to one of these. I'd like to set realistic expectations within my organization for creating this document. So I have a few of questions pertaining to this: We don't have design staff. Should we be looking for a design firm or freelancer to come in for a 2-6 month contract, or do we need a longer commitment? If we do go with a firm or freelancer, would the pay-scale be comparable to typical design work, or is a style guide a higher order of work? How long should it take a pro to create a style guide? To make estimates more concrete, let's say web only, including all custom graphics. Any red flags to watch out for? (Compare: a new coder who fails to use css properly would be a red flag.)

  Read the article

• Cannot enable Additional drivers for Broadcom in 12.10

  - by Compt

  tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

  Read the article

• How to improve Minecraft-esque voxel world performance?

  - by SomeXnaChump

  After playing Minecraft I marveled a bit at its large worlds but at the same time I found them extremely slow to navigate, even with a quad core and meaty graphics card. Now I assume Minecraft is fairly slow because: A) It's written in Java, and as most of the spatial partitioning and memory management activities happen in there, it would naturally be slower than a native C++ version. B) It doesn't partition its world very well. I could be wrong on both assumptions; however it got me thinking about the best way to manage large voxel worlds. As it is a true 3D world, where a block can exist in any part of the world, it is basically a big 3D array [x][y][z], where each block in the world has a type (i.e BlockType.Empty = 0, BlockType.Dirt = 1 etc.) Now, I am assuming to make this sort of world perform well you would need to: A) Use a tree of some variety (oct/kd/bsp) to split all the cubes out; it seems like an oct/kd would be the better option as you can just partition on a per cube level not a per triangle level. B) Use some algorithm to work out which blocks can currently be seen, as blocks closer to the user could obfuscate the blocks behind, making it pointless to render them. C) Keep the block object themselves lightweight, so it is quick to add and remove them from the trees. I guess there is no right answer to this, but I would be interested to see peoples' opinions on the subject. How would you improve performance in a large voxel-based world?

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >