Daily Archives

Articles indexed Monday November 28 2011

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • OpenBSD configuration: Client unable to automount via NFS using amd

    - by Rilindo
    What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

    Read the article

  • Messages stuck in SMTP queue - Exchange 2003

    - by Diav
    I need your help people ;-) I have a problem with messages coming into our Exchange Server and ones going out through it. Basically, the messages are stuck in the SMTP queue. A message will come into the server, I can see it listed under "Exchange System Manager", but if you list the properties of the message queue it says something like 00:10 SMTP Message queued for local delivery 00:10 SMTP Message delivered locally to [email protected] 00:10 SMTP Message scheduled to retry local delivery 00:11 SMTP Message delivered locally to [email protected] 00:11 SMTP Message scheduled to retry local delivery etc etc For outgoing message list looks like this: 10:55 SMTP: Message Submitted to Advanced Queuing 10:55 SMTP: Started Message Submission to Advanced Queue 10:55 SMTP: Message Submitted to Categorizer 10:55 SMTP: Message Categorized and Queued for Routing 10:55 SMTP: Message Routed nad Queued for Remote Delivery And the end - since then status didn't change, message is in queue, I am forcing connection from time to time but without an effect. I checked connection with smarthost (used telnet for that) and everything seems to work correctly, so the problem is probably on exchange side. I am using Exchange Server 2003 running on Small Business Server 2003. I don't have any antivirus installed on server. Remaining free space on each partition is over 3Gb, on partition with data bases - it is over 12Gb. All was working good and without problems since 2005, problems started in half of this june - messages started going out and being stuck almost randomly (I don't see a pattern yet, some are going out, some are not, some are going after several hours). I don't know what to do, what to check more, so please, any ideas? Best regards, D. edit Priv1.edb has 14,5GB and priv1.stm 2,6GB - together those files have more than 16GB - can it be the reason? If yes, then what? Indeed, I haven't thought that it can have something in common with my problem, but several users reported recent problems with Outlook Web Access - they can log in, they see the list of their mails, but they can't see the content of their emails. Although when they are connecting with Outlook 2003/2007 - there is no such problem, only with OWA there is. edit2 So,.. It works now, and I have to admit that I am not really sure what the problem was (hope it won't come back). What have I done: Cleaned up some mailboxes to reduce size of them Dismounted Information Store Defragmentated data base files ( I used eseutil: c:\program files\exchsrvr\bin eseutil /d g:\data base\Exchsrvr\MDBDATA\priv1.edb ) Mounted Information Store back ..and before I managed to do anything else - my queue started moving, elements which were kept there already for days - started moving and after few minutes everything was sent, both, outside and locally. But: priv1.edb is still big (13 884 203 008), priv1.stm as well (2 447 384 576), so this is probably not the issue of size of the file. And if not this, so what was that? And if that was issue of size of the file, then soon it will repeat - is there something I can do to avoid it ?

    Read the article

  • database scanning tools recommendation?

    - by stock99
    Lately my boss is asking me to looking into database scanners. I know very little about db scanning technology. Just wondering if it is worth to purchase tools like Sentrigo ( http://www.mcafee.com/us/about/sentrigo.aspx ) ? Does anyone have experience of using database scanner? Also, I'd like to know if there is any limitation on it. We already conducting internal OS and web scan on regular basis, by the way.

    Read the article

  • Scheduled Task to show console window when logged on but still run when not logged on

    - by HeartWare
    Is it possible (and if so, how) to set up a task (console application) in Server 2008 so that it'll run both when a user is logged in and when no user is logged in, AND - if the user is logged in (either local or via RDP) - have the console appear on the screen while the program is running? Ie. the program should run under the defined user context and it writes status messages to stdout, which goes to a standard console window. This console window is either shown (if the defined user is currently logged in locally or via RDP), or not shown (but the application is still run). I have access to the source of the console application, so if it needs some additional code (like specifically opening up a new console window or what have you), then that's not a problem. At the moment, I can set up the task as "Run only when user is logged on" which will run the application when the user is logged on (local or RDP) and I can then see the status messages, or I can set it up as "Run whether user is logged or not" and no status output is visible - not even if the user is logged on.

    Read the article

  • linux centos 5.6 someone installed irc

    - by Peter
    I need some help, my server provider contacted me to tell me my server was using 200mbit/s bandwidth. Upon investigation I found processes for a user that should not be there.. I found processes as follows: 26269 511 Nov27 ./stealth 58.22.68.253 53 775 511 Oct12 ./eggdrop -m botnick.conf I know eggdrop is IRC, my question is, where can I find out where the software has been installed for these processes?

    Read the article

  • Install APC RedHat

    - by zackaryka
    i am trying to install apc on redhat so i did: pecl install apc i said yes to: Use apxs to set compile flags (if using APC with Apache)? [yes]: and i get this: checking for re2c... no configure: WARNING: You will need re2c 0.9.11 or later if you want to \ regenerate PHP parsers. and checking whether apc needs to get compiler flags from apxs... Sorry, I was not able to successfully run APXS. Possible reasons: 1. Perl is not installed; 2. Apache was not compiled with DSO support (--enable-module=so); 3. 'apxs' is not in your path. Try to use --with-apxs=/path/to/apxs The output of apxs follows /tmp/tmpJQuZdD/APC-3.0.16/configure: line 3846: apxs: command not found configure: error: Aborting ERROR: `/tmp/tmpJQuZdD/APC-3.0.16/configure --with-apxs' failed what could be the problem? Thanks

    Read the article

  • Varnish POST problem "9 FetchError c backend write error: 11" for application/x-www-form-urlencoded content

    - by ompap
    Cutting a longish story short, we have managed to get a more precise error out of Varnishlog. Varnishlog tells us that we are sending a 31 TxRequest - POST 31 TxHeader - Content-Type: application/x-www-form-urlencoded but we are getting 9 FetchError c backend write error: 11 31 BackendClose - [backend name] 9 VCL_call c error 9 VCL_return c deliver 9 Length c 488 9 VCL_call c deliver 9 VCL_return c deliver 9 TxProtocol c HTTP/1.1 9 TxStatus c 503 We still do not know what this is exactly, but apparently Content-Type: application/x-www-form-urlencoded is not getting through as it should. Help still needed, please! Original message below. The title was "Varnish not letting Joomla users to log in - 503 guru meditation error", but I changed it to get more attention to the problem and not to the symptoms. Hello, We have a production site for a local newspaper which is currently behind an Apache reverse proxy, basicly the site on one server and the other being reserved as a reverse proxy only (well, there is more but that has no relevance here). Apache as a reverse proxy works, but could be faster. We want to change the reverse proxy to use Varnish instead of Apache on an Ubuntu 10.4 Server. The Varnish is version 2.10 installed directly from Ubuntu repos. Ubuntu 10.4 uses PHP 5.3.2. For anonymous surfers the site works wonderfully with Varnish. So far we can get very good speed out of Varnish, we just have a few problems with logging in or out. The big one is, that the users cannot log in: they get a Varnish 503 error page every time. The logs do not reveal the cause. It feels as if the request would never leave Varnish. So we are merely guessing - not a strong starting point. We have gone through what has been suggested on various plces on the web. We have increased the timeouts to backend xxx { .host = "xxx.xx"; .port = "http"; .connect_timeout = 60s; .first_byte_timeout = 60s; .between_bytes_timeout = 60s; } but we seem to get the 503 guru error page much faster than that, as in approx. 5 seconds. We have increased the Varnish headers size to 128 in daemon. In vcl_recv we have if (req.http.Authenticate || req.http.Authorization) { return(pass); } and in vcl_fetch ## auhtentication handling if (req.http.Authenticate || req.http.Authorization) { return(pass); } We do not strip cookies. We have tried to make sure that error pages are not cached. As said above, we cannot see anything in the backend Apache logs, apparently it never gets asked for Joomla user authentication. Varnish does not seem to get much mentioning with connection to Joomla. (We cannot dump Joomla, that selection has been done and we just have to live with what we have been given) Has anyone a working Varnish - Joomla combination? Thanks for reading. Please help. We need some hints - desperately. Any suggestions? ompap

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

  • Wyse Z Class Thin Client (WES7) Image Deployment

    - by nsr81
    We are currently working on deploying a few Wyse WES7 thin clients (Z Class, exact model escapes me at the moment). We have WDM setup, and are able to see new clients show up, interact with them, pull/push images. Our current workflow is something like this: Unpack & boot up the device Disable Windows Firewall, reboot Device shows up in WDM Publish our custom image to the new device. My question is whether or not there is a way I can bypass step 2, and put my image on the client right out of the box. Either using PXE or USB boot disk, such that I can boot into some sort of menu and tell the client to pull a particular image from the WDM server. With HP thin clients, we have a rule setup which detects new clients on the network and pushes our custom image to them first time they show up. I haven't been able to figure it out with Wyse.

    Read the article

  • Natively boot Virtualbox Image

    - by isync
    I am faced with a Windows hardware/software problem left over from another person. It's on me to resolve. It's a mission critical setup. The situation is: I've got a physical server machine with: -Disk C:\ (one disk) containing a basic install of Windows Server 2008 R2, formerly Win Vista Pro, now gone. -Disk D:\ (software Raid) containing a VirtualBox disk image of a configured Windows Server 2008 R2 running SQL Server R2 among others. What shall I do now? Migrate all the stuff from the configured VM to the basic but natively installed C:\ Windows Server 2008 R2 (with the possibility of breaking stuff)? Or, Setting up the machine to "natively boot" the VM with the help of bcdedit.exe (something I've read about, what I've never done, what I don't know of if it works, if it hits performance, or if it is stable for production) For me, being old skool, I am in the process of de-virtualising everything (option 1). But I'd be happy if someone suggests I am ok to go down the "natively boot" route.

    Read the article

  • Cross platform support for network attached USB hubs?

    - by larsks
    I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

    Read the article

  • Outgrew MongoDB … now what?

    - by samsmith
    We dump debug and transaction logs into mongodb. We really like mongodb because: Blazing insert perf document oriented Ability to let the engine drop inserts when needed for performance But there is this big problem with mongodb: The index must fit in physical RAM. In practice, this limits us to 80-150gb of raw data (we currently run on a system with 16gb RAM). Sooooo, for us to have 500gb or a tb of data, we would need 50gb or 80gb of RAM. Yes, I know this is possible. We can add servers and use mongo sharding. We can buy a special server box that can take 100 or 200 gb of RAM, but this is the tail wagging the dog! We could spend boucoup $$$ on hardware to run FOSS, when SQL Server Express can handle WAY more data on WAY less hardware than Mongo (SQL Server does not meet our architectural desires, or we would use it!) We are not going to spend huge $ on hardware here, because it is necessary only because of the Mongo architecture, not because of the inherent processing/storage needs. (And sharding? Please! Cost aside, who needs the ongoing complexity of three, five, or more servers to manage a relatively small load?) Bottom line: MongoDB is FOSS, but we gotta spend $$$$$$$ on hardware to run it? We sould rather buy commercial SW! I am sure we are not the first to hit this issue, so we ask the community: Where do we go next? (We already run Mongo v2) Thanks!!

    Read the article

  • Convert HTACCESS mod_rewrite directives to nginx format?

    - by Chris
    I'm brand new to nginx and I am trying to convert the app I wrote over from Apache as I need the ability to serve a lot of clients at once without a lot of overhead! I'm getting the hang of setting up nginx and FastCGI PHP but I can't wrap my head around nginx's rewrite format just yet. I know you have to write some simple script that goes in the server {} block in the nginx config but I'm not yet familiar with the syntax. Could anyone with experience with both Apache and nginx help me convert this to nginx format? Thanks! # ------------------------------------------------------ # # Rewrite from canonical domain (remove www.) # # ------------------------------------------------------ # RewriteCond %{HTTP_HOST} ^www.domain.com RewriteRule (.*) http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # This redirects index.php to / # # ------------------------------------------------------ # RewriteCond %{THE_REQUEST} ^[A-Z]+\ /(index|index\.php)\ HTTP/ RewriteRule ^(index|index\.php)$ http://domain.com/ [R=301,L] # ------------------------------------------------------ # # This rewrites 'directories' to their PHP files, # # fixes trailing-slash issues, and redirects .php # # to 'directory' to avoid duplicate content. # # ------------------------------------------------------ # RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)$ $1.php [L] RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)/$ http://domain.com/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^[A-Z]+\ /[^.]+\.php\ HTTP/ RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^([^.]+)\.php$ http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # If it wasn't redirected previously and is not # # a file on the server, rewrite to image generation # # ------------------------------------------------------ # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_\[email protected]#\ "'\+]+)/?([a-z0-9_\-]+)?(\.png|/)?$ generation/image.php?user=${escapemap:$1}&template=${escapemap:$2} [NC,L]

    Read the article

  • Ghost application error

    - by yaar zeigerman
    Back story for better understanding: I have a ghost made by someone else and toady some one I worked with made a new ghost in the same folder with the regular ghost I work with. I am trying to run the ghost now but get a 1808: Ghost Decompression Error and after aborting I get this message "Application Error 19225: Ghost has detected corruption in the image file. Please perform an integrity check on the image. If this problem persists, contact Symantec Technical Support at http://service.symantec.com" I would like to now if him making a new ghost could have ruined the old ghost and if not where did my problem come from and how do I fix it ?

    Read the article

  • Error pushing to remote with git

    - by pcm2a
    I have a fresh Centos 6 server stood up and I have installed git version 1.7.1 through yum. I am using the smart http method through apache for access. When I try to push to the remote server this is what I get: $ git push origin master Password: Counting objects: 6, done. Compressing objects: 100% (3/3), done. Writing objects: 100% (6/6), 436 bytes, done. Total 6 (delta 0), reused 0 (delta 0) error: unpack failed: index-pack abnormal exit I have tried these things which made no difference: chown -R apache:apache /path/to/git/repository (httpd runs as apache) chown -R apache:users /path/to/git/repository chmod -R 777 /path/to/git/repository (obviously not secure but wanted to eliminate this being a file permission problem) What can I try to get pushing to work?

    Read the article

  • Rebuilding array on 3ware 9690SA-8I

    - by Tim Jones
    I have a RAID10 (8x1TB) array on a 3ware 9690 card running on an Ubuntu 1110 server. There was a kernel update so I scheduled a reboot after which the array was inaccessible. I checked the status a drive has died in the array, but the controller has thrown the entire array into an 'inoperable' state instead of simply degraded (what's the point of the RAID now ;-). After taking out the 'dead' drive I run a quick test to find it completely functional without a bad sector to be found. I try to put the drive back in but the array still marks the disk as degraded (remembering serial number or something??) and the entire array as inoperable... So I swap it out for a known working drive (not the same capacity but higher - should still work) and initiate a rebuild with the the new drive as a replacement. This fails instantly with the error "(0x0B:0x0033): Unit busy : Failed to start Rebuild on Unit 0". The unit shouldn't be busy as it is not mounted (the card itself is listed with lshw but the array it provides is not). I'm pretty much at an impasse now, I don't understand how I can have a single drive failure on a RAID10 that makes the entire array inaccessible, degraded I could understand but inaccessible?? I don't think the controller as prior to the reboot it was completely functional.

    Read the article

  • mkisofs - Floppy Image to Disk Image

    - by CommunistPancake
    I'm trying to compile MikeOS on windows. I've successfully (I think) created a floppy (.flp) image of the operating system. I want to convert it to a disk image (.iso) so I can run it in virtual box. I've tried mkisofs -quiet -V 'MIKEOS' -input-charset iso8859-1 -o disk_images/mikeos.iso -b mikeos.flp disk_images/ Which is the command in the Linux build script. It does create an ISO image, but when I try to run in in VirtualBox, I get a black screen. What am I doing wrong? Here's my build script.

    Read the article

  • Access violations on Windows 2008 VPS

    - by James Hay
    I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

    Read the article

  • HTTP Error 503 - Service is unavailable (how fix?)

    - by SilverLight
    i have a web site for download mobile files and there many users in my web site. sometimes i have the error below : HTTP Error 503 - Service is unavailable 1-so why this error happens and what is that mean? 2-as i know appache free up itself when it's oveloaded, but what about iis? how can i put some limitations in my server (i have remote access to my server) for prevent this error happening? a.is limitation of dowload's speed efficient for prevent that error's occur? how can i do that? is squid useful for this job or i can do that with another iis extension. b.is limitation of download's Bandwidth efficient for prevent that error's occur? how can i do that (with iis or another extension)? in right side of iis - configure area - i found some limits. what do those limits mean and can i use them for keep my server alive all the time? EDIT: after viewing event viewer of windows - custom views - server rols - web server (iis) i figure out there is no error in that area. but many warnings and information. the latest warnings and information are like below : warning A worker process '2408' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '6764'. warning A worker process '3232' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '3928'. thanks in advance best regards

    Read the article

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP. Note: I know I could just use the internal IP inside of the network to access this service. But if I have a laptop that must be able to do this both from inside and outside it would be annoying to constantly switch between 1.2.3.4 and 192.168.1.100 in the software configuration. Router output: > iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 224.0.0.0/3 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 to:192.168.1.101 DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:25 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:12345 to:192.168.1.102 DNAT udp -- 0.0.0.0/0 192.168.1.1 udp dpt:53 to:217.118.96.203 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 192.168.1.0/24 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • sqlite3 support on centos with PECL?

    - by shadow_of__soul
    i just realized that the rpm version of php that i have installed on the server don't have sqlite support (well it have the PDO support but for some reason don't work) so i installed as a PECL extension, and now it show the support on the phpinfo() but still the open inviter script give me the error of: Call to undefined function sqlite_open() and i already restarted httpd also any hint where i can find a solution or guide?

    Read the article

  • how to force an illegal netmask in ubuntu

    - by user1064232
    I want to force a netmask on my Ubuntu machine. For example, I want 11.0.0.1 to get a netmask of 255.255.255.0 I tried editing /etc/network/interfaces and I forced the desired netmask, but as soon as I restarted the interfaces it changed it back to the default value. When I used ifconfig the netmask that I gave survived the interface restart but it was reset as soon as I rebooted the machine. Is there a way to force an "illegal" netmask on an interface?

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • How to edit a read-only document in LibreOffice?

    - by TestUser16418
    I need to fill a form (which I received in .doc format and saved as .odt). The file is read-only except for the fields where I can enter the information. Unfortunately, with the fields filled it doesn't fit on one page, and I need to edit it so I can print and submit it. With LibreOffice beta 3, I could edit anything outside of the fields, and the fonts were slightly smaller, so it fit on the page even with the fields filled. Today I upgraded LibreOffice, and when I opened to edit a field where I had a mistake, it no longer fits on the page, and I can't edit it. When I opened the properties it says that the document is NOT read-only, but it is. When I try to delete text it tells me that I can't edit the read-only content. Can anyone give me some advice, because I've been trying to print my form for 2 hours already. I tried AbiWord and KWord, but both are missing elements from the page (though the forms fit). I can also edit the margins (Format - Page is dimmed, but when I begin to edit a field it's no longer dimmed)med

    Read the article

  • Looking for software to create a personal hotspot on Mac OS X (not using the built-in ability)

    - by Fred
    I got my nifty little MacBook Air today. Since I will be going on travel I was hoping to use my iPad 3G as screen extension with Air Display. It works being in a shared WiFi network. Sadly Apple is a bit restrictive on the tethering with their mobile devices such as the iPad. Now I read iOS 4.3 will enable the iPad to use tethered networks. But the feature will not be working for iPad 3G. I assume their big partner telecom companies fear everyone will quit their internet contract with them. So I want to create a personal hotspot on my MacBook and use it on my iPad. But the iPad is not able to use this network. The network is visible but not usable. On Windows there is this connectify program which lets the PC act as wireless router. Does anybody know a similar program for Mac which would turn it into a wireless router? Or is there something I don't see with Mac OS X's builtin features?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >