Daily Archives

Articles indexed Saturday April 7 2012

Page 1/15 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • phpmyadmin on lighttpd gives me a 403 forbidden need help

    - by JamesM-SiteGen
    Whats the problem: When I goto //localhost/phpmyadmin I get what I would get if I did //localhost/, I'm using both http: and https:. What did I do, that changed it: I simply reinstalled lighttpd. What I have tried: Disabling and re-enabling 50-phpmyadmin.conf, Now I get a "403 - Forbidden" instead. When I goto /phpmyadmin/setup it asks me for a login, Not a clue what it is. Now I'm waiting for someone to help. :) Thanks to anyone with any answers. Latest Status: Not working, giving me a "403 - Forbidden".

    Read the article

  • SSH X11 not working

    - by azat
    I have a home and work computer, the home computer has a static IP address. If I ssh from my work computer to my home computer, the ssh connection works but X11 applications are not displayed. In my /etc/ssh/sshd_config at home: X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes At work I have tried the following commands: xhost + home HOME_IP ssh -X home ssh -X HOME_IP ssh -Y home ssh -Y HOME_IP My /etc/ssh/ssh_config at work: Host * ForwardX11 yes ForwardX11Trusted yes My ~/.ssh/config at work: Host home HostName HOME_IP User azat PreferredAuthentications password ForwardX11 yes My ~/.Xauthority at work: -rw------- 1 azat azat 269 Jun 7 11:25 .Xauthority My ~/.Xauthority at home: -rw------- 1 azat azat 246 Jun 7 19:03 .Xauthority But it doesn't work After I make an ssh connection to home: $ echo $DISPLAY localhost:10.0 $ kate X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. kate: cannot connect to X server localhost:10.0 I use iptables at home, but I've allowed port 22. According to what I've read that's all I need. UPD. With -vvv ... debug2: callback start debug2: x11_get_proto: /usr/bin/xauth list :0 2/dev/null debug1: Requesting X11 forwarding with authentication spoofing. debug2: channel 1: request x11-req confirm 1 debug2: client_session2_setup: id 1 debug2: fd 3 setting TCP_NODELAY debug2: channel 1: request pty-req confirm 1 ... When try to launch kate: debug1: client_input_channel_open: ctype x11 rchan 2 win 65536 max 16384 debug1: client_request_x11: request from 127.0.0.1 55486 debug2: fd 8 setting O_NONBLOCK debug3: fd 8 is O_NONBLOCK debug1: channel 2: new [x11] debug1: confirm x11 debug2: X11 connection uses different authentication protocol. X11 connection rejected because of wrong authentication. debug2: X11 rejected 2 i0/o0 debug2: channel 2: read failed debug2: channel 2: close_read debug2: channel 2: input open - drain debug2: channel 2: ibuf empty debug2: channel 2: send eof debug2: channel 2: input drain - closed debug2: channel 2: write failed debug2: channel 2: close_write debug2: channel 2: output open - closed debug2: X11 closed 2 i3/o3 debug2: channel 2: send close debug2: channel 2: rcvd close debug2: channel 2: is dead debug2: channel 2: garbage collecting debug1: channel 2: free: x11, nchannels 3 debug3: channel 2: status: The following connections are open: #1 client-session (t4 r0 i0/0 o0/0 fd 5/6 cc -1) #2 x11 (t7 r2 i3/0 o3/0 fd 8/8 cc -1) # The same as above repeate about 7 times kate: cannot connect to X server localhost:10.0 UPD2 Please provide your Linux distribution & version number. Are you using a default GNOME or KDE environment for X or something else you customized yourself? azat:~$ kded4 -version Qt: 4.7.4 KDE Development Platform: 4.6.5 (4.6.5) KDE Daemon: $Id$ Are you invoking ssh directly on a command line from a terminal window? What terminal are you using? xterm, gnome-terminal, or? How did you start the terminal running in the X environment? From a menu? Hotkey? or ? From terminal emulator `yakuake` Manualy press `Ctrl + N` and write commands Can you run xeyes from the same terminal window where the ssh -X fails? `xeyes` - is not installed But `kate` or another kde app is running Are you invoking the ssh command as the same user that you're logged into the X session as? From the same user UPD3 I also download ssh sources, and using debug2() write why it's report that version is different It see some cookies, and one of them is empty, another is MIT-MAGIC-COOKIE-1

    Read the article

  • ASP.NET Website Administration Tool: Unable to connect to SQL Server database

    - by MedicineMan
    I am trying to get authentication and authorization working with my ASP MVC project. I've run the aspnet_regsql.exe tool without any problem and see the aspnetdb database on my server (using the Management Studio tool). my connection string in my web.config is: <connectionStrings> <add name="ApplicationServices" connectionString="data source=MYSERVERNAME;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /> The error I get is: There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. In the past, I have had trouble connecting to my database because I've needed to add users. Do I have to do something similar here?

    Read the article

  • Why do I get xfs_freeze "Operation not supported" error with ec2-consistent-snapshot? Debian Squeeze w/ext4 filesystem

    - by Michael Endsley
    I'm running the following command: [[email protected] ~]# ec2-consistent-snapshot --aws-credentials-file '/some/dir/file' --mysql --mysql-socket '/var/run/mysqld/mysql.sock' --mysql-username 'backup' --mysql-password 'password' --freeze-filesystem '/dev/xvda1' vol-xxxxxx It returns this error: xfs_freeze: cannot freeze filesystem at /dev/xvda1: Operation not supported ec2-consistent-snapshot: ERROR: xfs_freeze -f /dev/xvda1: failed(256) snap-eeb66393 xfs_freeze: cannot unfreeze filesystem mounted at /dev/xvda1: Invalid argument ec2-consistent-snapshot: ERROR: xfs_freeze -u /dev/xvda1: failed(256) This is being run on Debian Squeeze with the ext4 Linux filesystem. Can anyone explain this error to me, or what might be its cause? When googling, I found information about it needing to be executed with sudo, but I'm performing the entire operation as root. I also found some posts about trying to run it after a CentOS upgrade using yum, but the situation appeared dissimilar. It's difficult to find things referring to this situation exactly. xfs_freeze is available for use on the filesystem. Is it possible that the filesystem, despite being ext4, somehow doesn't support freezing? Sorry if I've missed some bit of StackExchange etiquette with this post -- it's my first venture here!

    Read the article

  • Restrict VPN user to Remote Desktop only with Sonicwall

    - by Matt
    Basically I want him to only be able to log onto the VPN in order to use Remote Desktop to use HIS machine. Not surf the internet or do anything like that, but just use the programs on his machine that he doesn't have at home. We use a Sonicwall NSA 220 with their regular VPN client. I can create a user for him, but when I create an access rule it applies to all VPN users. How can I make something like that only apply to ONE user?

    Read the article

  • How can I get metrics such as incoming and outcoming traffic with Apache servers?

    - by hhh
    Suppose a network consisting of hubs A, B, C, D ... and X. I am looking for ways to visualize how users use the network such as incoming, outgoing and other metrics. In Apache logs, I can see some errs if something did not work but I have no realistic picture about such a system in general i.e. how the system actually works. I am looking for some sort of flow-analysis and I would like to get pure data to create some graph. Then analyze the graph with some metrics where I do not even know the right metrics, perhaps some dispersion metric. My goal is to create some sort of objective way to judge quality.

    Read the article

  • Possible to get SSD TRIM (discard) working on ext4 + LVM + software RAID in Linux?

    - by Don MacAskill
    We use RAID1+0 with md on Linux (currently 2.6.37) to create an md device, then use LVM to provide volume management on top of the device, and then use ext4 as our filesystem on the LVM volume groups. With SSDs as the drives, we'd like to see the TRIM commands propagate through the layers (ext4 - LVM - md - SSD) to the devices. It looks like recent 2.6.3x kernels have had a lot of new SSD-related TRIM support added, including lots more coverage of Device Mapper scenarios, but we still can't seem to get it to cascade down properly. Is this possible yet? If so, how? If not, is any progress being made?

    Read the article

  • GNU screen, how to get current sessionname programmably

    - by Jimm Chen
    [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

    Read the article

  • Trouble opening my router to my web server [closed]

    - by justin
    Here's the story. I have a webs server created and connected to my router. The website works great when I'm connected to the router, but when I'm off the network I can't access the website. I got the IP for my router by googling "what is my ip." I have opened ports 80 to 10080 to link to the server in the router. THe firewall is off. I can ping the router. One odd thing that I don't understand. When I am in network if I access XXX.XXX.XX.XX:80 I can access the web page no problem. If I access XXX.XXX.XX.XX:81 (or any other port) I get the error "Cannot access server." Any idea what the problem could be? Could it be my ISP?

    Read the article

  • Trying to use Nginx try_files to emulate Apache MultiViews

    - by Samuel Bierwagen
    I want a request to http://example.com/foobar to return http://example.com/foobar.jpg. (Or .gif, .html, .whatever) This is trivial to do with Apache MultiViews, and it seems like it would be equally easy in Nginx. This question seems to imply that it'd be easy as try_files $uri $uri/ index.php; in the location block, but that doesn't work. try_files $uri $uri/ =404; doesn't work, nor does try_files $uri =404; or try_files $uri.* =404; Moving it between my location / { block and the regexp which matches images has no effect. Crucially, try_files $uri.jpg =404; does work, but only for .jpg files, and it throws a configuration error if I use more than one try_files rule in a location block! The current server { block: server { listen 80; server_name example.org www.example.org; access_log /var/log/nginx/vhosts.access.log; root /srv/www/vhosts/example; location / { root /srv/www/vhosts/example; } location ~* \.(?:ico|css|js|gif|jpe?g|es|png)$ { expires max; add_header Cache-Control public; try_files $uri =404; } } Nginx version is 1.1.14.

    Read the article

  • Puppet Agent fails sporadically, with either timeout or "Could not find class" error

    - by smokris
    I have puppet master running on a Xen dom0, and 3 domUs syncing to it via an hourly crontab puppet agent --test. About 80% of the time, the puppet agent --test completes successfully: info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 5.08 seconds The other 20% of the time, it fails midway, with errors such as the following: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not find class iptables for test1 at /etc/puppet/manifests/site.pp:1 on node test1 warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test2 info: Applying configuration version '1333319732' notice: Finished catalog run in 24.73 seconds err: Could not send report: Error 500 on SERVER: Internal Server Error private method `gsub' called for WEBrick::HTTPStatus::RequestTimeout:Class WEBrick/1.3.1 (Ruby/1.8.5/2006-08-25) OpenSSL/0.9.8e-rhel5 at puppet:8140 or info: Retrieving plugin err: Could not retrieve catalog from remote server: execution expired warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 9.47 seconds err: Could not send report: Error 408 on SERVER: Request Timeout During this time, I've not made any changes to the Puppet configuration — it just sporadically fails. I'm running puppet-2.7.12 on CentOS, and followed the setup instructions described on http://docs.puppetlabs.com/learning/agent_master_basic.html. Any ideas about how I can troubleshoot this?

    Read the article

  • Debian Squeeze locale settings

    - by regularfry
    I have a problem with a slightly customised Debian image that I'm trying to do some headless work on. The problem is that the installed locales list has been reduced to this: C en_GB en_GB.iso88591 en_GB.iso885915 en_GB.utf8 POSIX However, when I log in as root (with an otherwise as-vanilla profile), I find this: ~# set | grep LC_ LC_CTYPE=en_US.UTF-8 That's the only LC_ environment variable set, and presumably that means that it's being explicitly set somewhere (and given that /etc/default/locale only contains LANG=en_GB, I can't see any other alternative). However, I can't see where it is being set, and the fact that it's wrong is preventing, for example, postgresql-8.4 from installing. I know I can do an LC_CTYPE=en_GB apt-get install postgresql-8.4 to work around this, but I'd really like to understand where this setting comes from, and I really dislike the idea of installing an otherwise-unnecessary locale to make this go away. So: where does this LC_CTYPE setting come from, and how do I make it go away?

    Read the article

  • (0xC03A0014) Failed to add device 'Microsoft Virtual Hard Disk'

    - by maniargaurav
    We had Windows 2008 SP2 Server. It was crashed due to mother board problem. After we got new motherboard we have installed Windows 2008 R2. Now when we try to attach Old VHD File we are getting following issue. Failed to add device 'Microsoft Virtual Hard Disk'. Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' TestVM': Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' (0xC03A0014). (Virtual machine ID 5626AAB2-C21C-48FF-8B70-40671CBC573B)

    Read the article

  • share one vpn connection through windows rras with other clients

    - by KTYP
    I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the licenses (like site - to - site). I install RRAS on a windows 2008 R2 (svrw2k8r2) and made the static routes on client computers. I could able to ping to the VPN's IP on svrw2k8r2 server but they can't seems to connect to the servers in other branch through this setup. Below is my setup My Branch Server: svrw2k8r2 - Windows 2008 R2 IP: 192.168.40.100/24 VPN IP: 10.0.100.12/8 Clients Win7 IP: 192.168.40.101 - 110 / 24 Other Branch Servers IP:10.10.0.10-20/24

    Read the article

  • EC2 instance store cloning or to ebs via gui management console

    - by devnull
    I have found similar questions here but the answer are either outdated or are from the command line. The case is this. I have an EC2 instance using instance store (this was the only AMI available for Debian 6 in Ireland). Now through the AWS GUI I can do a snapshot of the instance volume and/or even create a volume. But an image made from the snapshot doesn't boot. What is the best solution to either clone an EC2 instance that uses instance store OR from the created snapshot of the instance store to launch a new EBS instance (identical clone) FROM the gui aws management console and not command line ? Before turning this down consider that there is not similar question on how to do it via the aws management console. hint can't be done is not an appropriate answer. As you can create a snapshot of the instance store backed instance and/or a volume and create an AMI from that snapshot.

    Read the article

  • how to use iis 6.0 redirects?

    - by payling
    I'm attempting to use the below reference to create a re-direct for my local site with no luck. http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/6b855a7a-0884-4508-ba95-079f38c77017.mspx?mfr=true I want absolute links on my local site that point online to point to my local site instead. example absolute link [http://online.com/products] when I click the local version I'd like it to redirect to: [http://offline/products] I want to preserve everything after the domain name and append it to the server (local) name so that when I click a link it will redirect to the local site and not the online version. I've tried [http://offline$S] but that doesn't append the "suffix" /products the way I thought it should. What's going on here?

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

  • atl90.dll version 9.0.30729.4148 is missing in WinSxS folder

    - by mkva
    I have the following problem: when starting Visual Studio 2008, it says "Cannot find one or more components. Please reinstall the application." and stops. With the help of Sysinternals ProcessMonitor, I found out that Visual Studio could not load the atl90.dll 9.0.30729.4148 from the WinSxS folder. I tried to manually copy the older atl90.dll 9.0.30729.1 with the result that Visual Studio works again. Now I call this a dirty workaround, and not a solution. Plus I still don't know the reason why the atl90.dll disappeared in the first place. So my questions: - Does anyone know of a reason why this might have happened? - Does anyone know a real solution to the problem, e.g. a Microsoft download that includes the atl90.dll in the correct version 9.0.30729.4148 that installs into WinSxS? Some details: - WinXp SP3 - missing DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_353599c2\atl90.dll - workaround DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_d01483b2\atl90.dll - manifests in WinSxS seem to be alright, but unfortunately all point to the missing version 9.0.30729.4148 Thanks, Markus

    Read the article

  • Dell XPS 15z/ L511Z merging partitions

    - by Alvin M
    i have a situation here, i bought a new dell xps 15z and was successful in making drive partitions through the help of this site (http://superuser.com/questions/313082/dell-xps-15-l502x-hard-drive-partition) now i have drive C with 100.55gb and a new volume with 578.45gb im planning to use EaseUS again to undo this and resize my drive C but im scared i might cause damage to my drive, is there a proper way to undo this and transfer the remaining 78.45gb from the new volume back to my drive C again? please help

    Read the article

  • Any command line tool checking windows domain password?

    - by Chen Jun
    Does Windows provide a command line utility that lets me check a domain user's password? It is sufficient that the utility returns success(0) if I provide a matching domain user name and password. Alternatively, is there a simple VB/JS script that can do this? I'm the Intranet admin of my company and have the default password set for corporate staff, so I'd like to quickly scan which users have not changed their default password. Better yet, are there any books or websites which cover such topics so that I can get more information?

    Read the article

  • Automatically clear cache of all major browsers installed

    - by MorganTiley
    I would like a way to clear cache from all my locally installed browsers - quickly and easily. A simple utility that would ask "Clear all browser caches?" with Yes/No. Just the major browsers -IE, Firefox, Safari, Chrome and optionally Opera I understand CCleaner can do this but it is not as simple as I would like (as it has other functions as well). I tried googling/stacking and couldn't find anything.

    Read the article

  • Disable Java Plugin in Google Chrome?

    - by Jeff Atwood
    This is the second time I've had a drive-by executable installed on my machine using the following: Google Chrome 6 (latest) Windows 7, UAC on This happened while I was browsing for images to add to a gaming.se post; one of the sites I visited (to get an image of a transfer cable) must have had drive-by browser exploit code running. UAC alerted me that a weird temporary executable wanted to run, and I declined, but I still got the fake antivirus executable running on my machine. Sigh.. I do have Java installed because I upload stuff monthly to clearbits.net and their uploader is a Java plugin. So my best guess is, websites are doing drive-by installs using the massive numbers of zero-day vulnerabilities in the Java browser plugins. For now, I have uninstalled Java, which works. But I wondered if I could disable the Java plugin in Google Chrome instead. So, how do you disable these vulnerable plugins in Google Chrome? I can't find the UI.

    Read the article

  • How to "swap in" again memory from page file to physical memory in Windows at once (like linux swap-off)

    - by Arnout
    Is there a way to swap back in (to put back all the memory data that was put into the page file (or swap, whatever you prefer)) memory on a windows PC? On linux, one can easily do this with the swapoff /dev/sdaX, where X is the swap partition. On windows, it seems to ask me to reboot each time.. The reason I'd like to do this, is that, even though swapping out the data to the swap file allows me to play a resource-hungry game fully in physical ram, when I stop the game, all the rest of my programs run slow. This is or course normal; all the programs were pushed into the page file because my RAM was too small, and all memory access to those programs after gaming bumps into hard page faults, with major delays and some frustration as a consequence. However, that frustration could easily be avoided, by simply allowing the PC to copy all data back into the physical memory for a minute or so, and then resume working on a fast working PC! (rather than having to endure the slowness -while- working) Thanks in advance for any advice on this! Kind regards

    Read the article

  • I can't download or stream for more then 3 sec, and then the conection activity just dies

    - by JMHein
    Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >