Daily Archives

Articles indexed Monday April 9 2012

Page 1/16 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • APC (PHP Cache) Uptime 0 minutes, not caching

    - by Jussi
    My goal is to implement APC for opcode cache for a drupal 6 production site. I have so far tested APC with several php files with and without including other php files with include_once. Also tried to tweak the apc.ini values for shm_size, apc.include_once_override and apc.stat. Restarted apache every time. Resulting in apc.php not showing any changes in any values. (except of course the changed apc.ini values are shown as they should) Every time i refresh the apc.php test page, the start time resets as the current time showing uptime 0 minutes. apc.php -testpage shows: General Cache InformationAPC Version 3.1.9 PHP Version 5.2.10 APC Host xxxx.xx.xx Server Software Apache/2.2.3 (CentOS) Shared Memory 1 Segment(s) with 128.0 MBytes (mmap memory, pthread mutex Locks locking) Start Time 2011/07/26 11:53:56 Uptime 0 minutes File Upload Support 1 Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 1 Request Rate (hits, misses) 2.00 cache requests/second Hit Rate 1.00 cache requests/second Miss Rate 1.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 16 apc.mmap_file_mask /tmp/apcphp5.095eRm apc.num_files_hint 1024 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.slam_defense 0 apc.stat 0 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1 Host Status Diagrams: Free: 128.0 MBytes (100.0%) Hits: 1 (50.0%) Used: 20.3 KBytes (0.0%) Misses: 1 (50.0%) Detailed Memory Usage and Fragmentation: Fragmentation: 0% phpinfo shows: Server API CGI/FastCGI APC: Version 3.1.9 APC Debugging Enabled MMAP Support Enabled MMAP File Mask /tmp/apcphp5.JkKDk7 Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Jul 21 2011 14:31:12 I followed these steps to find if suexec settings would prevent caching: http://www.litespeedtech.com/support/forum/showthread.php?t=4189 [[email protected] /]# ps -ef|grep lsphp root 20402 17833 0 11:21 pts/0 00:00:00 grep lsphp [[email protected] /]# ps -waux root 17833 0.0 0.1 5004 1484 pts/0 S 10:39 0:00 bash ..indicates that there is no lsphp running on the host also I read the following article and comments, concluding that in my case the problem is not the suexec as the user apache is the httpd process owner http://www.brandonturner.net/blog/2009/07/fastcgi_with_php_opcode_cache/ also suexec command is not recognized when logged and launced as root @ host also i'm almost confident that there is no cPanel running on the host to check if a setting there would reset the running cache process at some interval This leaves me with few clues where to head next. I tried to set (with chown and chgrp) apache as the owner of the apc.php file and some test php files resulting in 500 server error. Is there a way to check if the file permissions prevent the apc stay running? I'm tremendously grateful for any suggestions or help.

    Read the article

  • IIS 7 rewriting subdomain to point at a specific port

    - by Tommy Jakobsen
    Having installed Team Foundation Server 2010 on Windows Server 2008, I need an easy URL for our developers to access their repositories. The default URL for the TFS repositories is http://localhost:8080/tfs Now I want the subdomain domain tfs.server.domain.com to point at http://localhost:8080/tfs. And when you access tfs.server.domain.com/repos_name it should redirect to http://localhost:8080/tfs/repos_name. How can I do this in IIS7? I already tried using the following rule, but it does not work. I get a 404. <rewrite> <globalRules> <rule name="TFS" stopProcessing="true"> <match url="^(?:tfs/)?(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^tfs.server.domain.com$" /> </conditions> <action type="Rewrite" url="http://localhost:8080/tfs/{R:1}" /> </rule> </globalRules> </rewrite> EDIT I actually got this working by adding a binding for the site on port 80 with host name tfs.server.domain.com. But using tfs.server.domain.com, I can't authenticate using Windows Authentication. Is there something that I need to configure for Windows Authentication? You can see a trace here: http://pastebin.com/k0QrnL0m

    Read the article

  • User not found for cn=config in OpenLDAP?

    - by Nick
    We're running OpenLDAP on Ubuntu 10.04. I'm able to access and use the front end with cn=admin,dc=ourcompany,dc=com and my password. But I'm unable to change the server's configuration (like loglevel) stored in cn=config because I don't seem to have a valid user/password for the backend? Some examples: # ldapsearch SASL/DIGEST-MD5 authentication started Please enter your password: ldap_sasl_interactive_bind_s: Invalid credentials (49) additional info: SASL(-13): user not found: no secret in database or # ldapadd -x -D "cn=admin,cn=config" -W -f "my.ldif"" Enter LDAP Password: ldap_bind: Invalid credentials (49) How do I create a user for the cn=config backend?

    Read the article

  • Problems accessing FileZilla FTP Server from static IP

    - by Kurru
    I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

    Read the article

  • OS/X 10.6 Bizarre login bug: Making alternative "Others..." appear. Why does this happen?

    - by bjornl
    I am studying at NUS in Singapore, and they have a mac-equipped computer lab here at school. All users (students) have our own personal accounts that we use to log in to the computers with. Sometimes when you approach a computer to log in only the alternative "thinkmac", which is the school's administrator account, I presume. Some other computers have the alternative "thinkmac" as well as "Others..." where you can input your own login credentials. One day as I sat down by a computer and there was only the "thinkmac" alternative. I was about to get up and find another one when the guy sitting next to me says - Just click 'thinkmac' - the computer will ask for your password - then hit escape to get back to the login screen. Repeat until "Others..." appear. So: If you click any user account, hit ESC to get taken back to the login screen, repeat for 5-10x, eventually the alternative "Others..." will appear. Why is this? Is there an internal counter that keeps track on how many times you have clicked a/any given user account, and after a certain threshold it displays the "Others"? What is the logical reasoning behind this?

    Read the article

  • Sleep/Suspend and WOL on FreeNAS

    - by Timothy R. Butler
    I am trying to figure out how to get FreeNAS 8 to sleep when inactive and, ideally, wake on lan activity (or, less ideally, wake on a WOL magic packet). However, as I've tried to search for information on how to do this, almost all discussions seem to be centered on FreeNAS 7. Also, the tools included in FreeBSD to do this seem to be missing (i.e. acpiconf, etc.). Is there a way to get FreeNAS 8 to sleep and wake so that I don't have to leave the server running all the time? Given its usage level, it seems a waste to have the server running constantly.

    Read the article

  • Cross domain javascript form filling, reverse proxy

    - by Michel van Engelen
    I need a javascript form filler that can bypass the 'same origin policy' most modern browsers implement. I made a script that opens the desired website/form in a new browser. With the handler, returned by the window.open method, I want to retrieve the inputs with theWindowHandler.document.getElementById('inputx') and fill them (access denied). Is it possible to solve this problem by using Isapi Rewrite (official site) in IIS 6 acting like a reverse proxy? If so, how would I configure the reverse proxy? This is how far I got: RewriteEngine on RewriteLogLevel 9 LogLevel debug RewriteRule CarChecker https://the.actualcarchecker.com/CheckCar.aspx$1 [NC,P] The rewrite works, http://ourcompany.com/ourapplication/CarChecker, as evident in the logging. From within our companysite I can run the carchecker as if it was in our own domain. Except, the 'same origin policy' is still in force. Regards, Michel

    Read the article

  • How \Deleted flag can be unset for all mails in cyrus-imapd mailbox?

    - by Sachin Divekar
    I have a 5GB mailbox which I moved using imapsync. But somehow I messed up with --delete/--delete2 option and end up with almost all the messages having \Deleted flag set. I do not have delayed expunge enabled, so I can not use unexpunge utility. I am using cyrus-imapd v2.3.7. Using cyrus-imapd's debugging feature I found out that email client(Roundcube in my case) fires following IMAP command to unset it. UID STORE 179 -FLAGS.SILENT (\Deleted) I don't know if somehow I can fire this command for all the mails. Is there any way I can unset \Deleted flag for all the mails in the mailbox? UPDATE: Using @geekosaur's tip of specifying range of message-ids in the above command, I could solve it for one mailbox under INBOX like INBOX.folder1. Is there any way I can do it for multiple mailboxes under INBOX recursively? Now I am working on solving it using/creating some script, maybe using Perl's IMAP related module. But still I need to solve it asap so inputs are welcome.

    Read the article

  • debian mysql server always down

    - by lokheart
    I am hosting a mysql server in a debian 6.0.4 server hosted in linode, the new data is frequently written into the mysql server using R, about 30-40 "write" per minute, about 7 hours a day, 5 days a week. Recently I found that the mysql server seem to down frequently, always give me error that mysql server cannot be connected through socket. I wonder if this is caused by my high demand to my mysql server, and if this can be solved. I am definitely a newbie in manage server. Please let me know if I need to provide additional information for this question in order to get it solved. Thanks.

    Read the article

  • SQL Server Snapshot Replication Subscriber (Editable or Read-Only)

    - by NateReid
    I need to create a copy of my SQL 2008 R2 Enterprise database and have it located on the same server as the original. I will be using this second copy of the database as the target of a mostly read-only website. I understand that if I create this copy of the database using snapshot replication that all data changes in the subscriber database will be overwriten in the event of the next replication. The web application will try to write to this database to record login attempts, etc and will fail if its source database is read-only. In my case I do not need to keep these auditing records and they can therefore be overwriten each time a new snapshot is applied. My question is whether SQL Server forces the subcriber database to be read-only and is there any way around this? Thank you, Nate

    Read the article

  • My IIS server won't serve SSL sites to some browsers

    - by sbleon
    (Update: This is now cross-posted at http://stackoverflow.com/questions/3355000. This is the more appropriate forum, but StackOverflow gets a lot more traffic.) I've got an IIS 6.0 server that won't serve pages over SSL to some browsers. In Webkit-based browsers on OS X 10.6, I can't load pages at all. In MSIE 8 on Windows XP SP3, I can load pages, but it will sometimes hang downloading images or sending POSTs. Working: Firefox 3.6 (OS X + Windows) Chrome (Windows) Partially Working: MSIE 8 (works sometimes, but hangs up, especially on POSTs) Not Working: Chrome 5 (OS X) Safari 5 (OS X) Mobile Safari (iOS 4) On OS X (the easiest platform for me to test on), Chrome and Firefox both negotiate the same TLS Cipher, but Chrome hangs on or after the post-negotiation handshake. Chrome packet capture (via ssldump): 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 cipher suites Unknown value 0xc00a Unknown value 0xc009 Unknown value 0xc007 Unknown value 0xc008 Unknown value 0xc013 Unknown value 0xc014 Unknown value 0xc011 Unknown value 0xc012 Unknown value 0xc004 Unknown value 0xc005 Unknown value 0xc002 Unknown value 0xc003 Unknown value 0xc00e Unknown value 0xc00f Unknown value 0xc00c Unknown value 0xc00d Unknown value 0x2f TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 Unknown value 0x35 TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x32 Unknown value 0x33 Unknown value 0x38 Unknown value 0x39 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.3106 (0.2620) S>C Handshake ServerHello Version 3.1 session_id[32]= bb 0e 00 00 7a 7e 07 50 5e 78 48 cf 43 5a f7 4d d2 ed 72 8f ff 1d 9e 74 66 74 03 b3 bb 92 8d eb cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL Certificate ServerHelloDone 1 3 0.3196 (0.0090) C>S Handshake ClientKeyExchange 1 4 0.3197 (0.0000) C>S ChangeCipherSpec 1 5 0.3197 (0.0000) C>S Handshake [hang, no more data transmitted] Firefox packet capture: 1 1 0.0485 (0.0485) C>S Handshake ClientHello Version 3.1 resume [32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipher suites Unknown value 0xff Unknown value 0xc00a Unknown value 0xc014 Unknown value 0x88 Unknown value 0x87 Unknown value 0x39 Unknown value 0x38 Unknown value 0xc00f Unknown value 0xc005 Unknown value 0x84 Unknown value 0x35 Unknown value 0xc007 Unknown value 0xc009 Unknown value 0xc011 Unknown value 0xc013 Unknown value 0x45 Unknown value 0x44 Unknown value 0x33 Unknown value 0x32 Unknown value 0xc00c Unknown value 0xc00e Unknown value 0xc002 Unknown value 0xc004 Unknown value 0x96 Unknown value 0x41 TLS_RSA_WITH_RC4_128_MD5 TLS_RSA_WITH_RC4_128_SHA Unknown value 0x2f Unknown value 0xc008 Unknown value 0xc012 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA Unknown value 0xc00d Unknown value 0xc003 Unknown value 0xfeff TLS_RSA_WITH_3DES_EDE_CBC_SHA compression methods NULL 1 2 0.0983 (0.0497) S>C Handshake ServerHello Version 3.1 session_id[32]= 14 03 00 00 4e 28 de aa da 7a 25 87 25 32 f3 a7 ae 4c 2d a0 e4 57 cc dd d7 0e d7 82 19 f7 8f b9 cipherSuite TLS_RSA_WITH_RC4_128_MD5 compressionMethod NULL 1 3 0.0983 (0.0000) S>C ChangeCipherSpec 1 4 0.0983 (0.0000) S>C Handshake 1 5 0.1019 (0.0035) C>S ChangeCipherSpec 1 6 0.1019 (0.0000) C>S Handshake 1 7 0.1019 (0.0000) C>S application_data 1 8 0.2460 (0.1440) S>C application_data 1 9 0.3108 (0.0648) S>C application_data 1 10 0.3650 (0.0542) S>C application_data 1 11 0.4188 (0.0537) S>C application_data 1 12 0.4580 (0.0392) S>C application_data 1 13 0.4831 (0.0251) S>C application_data [etc] Update: Here's a Wireshark capture from the server end. What's going on with those two much-delayed RST packets? Is that just IIS terminating what it perceives as a non-responsive connection? 19 10.129450 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=3 TSV=699250189 TSER=0 20 10.129517 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1460 WS=0 TSV=0 TSER=0 21 10.168596 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSV=699250189 TSER=0 22 10.172950 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Hello 23 10.173267 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 24 10.173297 10.100.xxx.xx 67.249.xxx.xxx TCP [TCP segment of a reassembled PDU] 25 10.385180 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=2897 Win=524280 Len=0 TSV=699250191 TSER=163006 26 10.385235 10.100.xxx.xx 67.249.xxx.xxx TLSv1 Server Hello, Certificate, Server Hello Done 27 10.424682 67.249.xxx.xxx 10.100.xxx.xx TCP 50653 > https [ACK] Seq=148 Ack=4215 Win=524280 Len=0 TSV=699250192 TSER=163008 28 10.435245 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Client Key Exchange 29 10.438522 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Change Cipher Spec 30 10.438553 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=421 Win=65115 Len=0 TSV=163008 TSER=699250192 31 10.449036 67.249.xxx.xxx 10.100.xxx.xx TLSv1 Encrypted Handshake Message 32 10.580652 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [ACK] Seq=4215 Ack=458 Win=65078 Len=0 TSV=163010 TSER=699250192 7312 57.315338 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50644 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0 19531 142.316425 10.100.xxx.xx 67.249.xxx.xxx TCP https > 50653 [RST, ACK] Seq=4215 Ack=458 Win=0 Len=0

    Read the article

  • Virtualmin Configuration

    - by Allen
    I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

    Read the article

  • Clients not recognizing secondary LDAP groups?

    - by Nick
    I'm having an issue where users who are members of secondary groups in LDAP are not being recognized as members of that group by the client. In this case, user jdoe is not being recognized as a member of the projects group. On the client, getent group shows: projects:*:20001:1001,1002,1003,1004,1005,1006 and getent passwd shows: jdoe:x:1003:10003:John Doe:/home/jdoe:/bin/bash But if I log in to the client as jdoe, and run id, I get: uid=1003(jdoe) gid=10003(jdoe) groups=24(cdrom),25(floppy),29(audio),44(video),46(plugdev),10003(jdoe) It recognizes jdoe's primary group, and the secondary groups that are appended by the client to all LDAP users, but the LDAP secondary groups are not in the list. We can see that jdoe's id is in the projects group, so why is the projects group not showing when jdoe runs the id command? The group objects are basic posixGroup entries, with a memberUid attribute for each of its members. We are using OpenLDAP on Ubuntu 10.04 server and clients.

    Read the article

  • Network connection to Firebird 2.1 became slow after upgrading to Ubuntu 10.04

    - by lyle
    We've got a setup that we're using for different clients : a program connecting to a Firebird server on a local network. So far we mostly used 32bit processors running Ubuntu LTS (recently upgraded to 10.04). Now we introduced servers running on 64bit processors, running Ubuntu 10.04 64bit. Suddenly some queries run slower than they used to. In short: running the query locally works fine on both 64bit and 32bit servers, but when running the same queries over the network the 64bit server is suddenly much slower. We did a few checks with both local and remote connections to both 64bit and 32bit servers, using identical databases and identical queries, running in Flamerobin. Running the query locally takes a negligible amount of time: 0.008s on the 64bit server, 0.014s on the 32bit servers. So the servers themselves are running fine. Running the queries over the network, the 64bit server suddenly needs up to 0.160s to respond, while the 32bit server responds in 0.055s. So the older servers are twice as fast over the network, in spite of the newer servers being twice as fast if run locally. Apart from that the setup is identical. All servers are running the same installation of Ubuntu 10.04, same version of Firebird and so on, the only difference is that some are 64 and some 32bit. Any idea?? I tried to google it, but I couldn't find any complains that Firebird 64bit is slower than Firebird 32bit, except that the Firebird 2.1 change log mentions that there's a new network API which is twice as fast, as soon as the drivers are updated to use it. So I could imagine that the 64bit driver is still using the old API, but that's a bit of a stretch, I guess. Thanx in advance for any replies! :)

    Read the article

  • Why is user asked to choose their workgroup?

    - by Clinton Blackmore
    We running Mac OS X Server 10.5.8 with Mac OS X 10.5.8 clients. Students use network logins to, well, log in. I've been asked to deny internet access to a specific user. I was told that a good way to do it is to create a user workgroup called "No Internet Access" and manage settings there. (Specifically, I told parental controls to allow access to no sites, and blacklisted all the installed web browsers). Now, when the user authenticates to log in, they are greeted with this dialog: Workgroups for <username> Grade 7 Students No Internet Access It is unlikely that the student would willing choose "No Internet Access" to be their base group. Looking in Workgroup Manager at the student's record, it shows their primary group ID is the grade 7 group, and "No Internet Access" is listed as another group they belong to. I looked at the managed preferences for all the computers pertaining to logins. They are set to their defaults. Specifically, the computer groups' preference for Logins - Access has the defaults: [unchecked] Ignore workgroup nesting [checked] Combine available workgroup settings Based on my reading of Tips and Tricks for Mac Administrators, this should be correct, the user should not be asked which group they belong to, and settings from all applicable groups should be applied. How can I achieve that result? Edit: I've decided to add some additional information from the Tips and Tricks for Mac Management White Paper (via Apple in Education, via the author's site). On page 21, it says: With Leopard MCX, workgroup preference settings are combined by default into a single set of values. This means that instead of having to choose between the Math, Science, or Language Arts workgroups when logging in, a user can just authenticate and be taken directly to the desktop. All the settings for each of those workgroups are composited together, providing you with all the Dock items and a composite of all the other settings. On page 40, an example is given in which settings are combined from different 'domains', one computer group, two (user) workgroups, and one individual user's settings. [When johnd logs into a leopard client,] the items staged in the Dock from left to right are: computer group, first workgroup alphabetically, second workgroup, user. Items within the workgroup are staged alphabetically. Nowhere is there an indication that groups are nested; indeed, I can see no sensible (non-flat) heirarchy for groups like Math, Science, and Language Arts. I strongly believe that there is a way to apply settings from two unrelated user workgroups such that a user of OS X 10.5.x or newer does not need to choose their workgroup. This is what I seek to achieve.

    Read the article

  • Macports Apache not starting at Mac OS X snow leopard boot [closed]

    - by greg
    I've done the launchctl load command, the symlinks point to my /opt/local/etc/LaunchDaemeons/org.macports.apache2/org.macports.apache2.plist, but it never starts. I can start it manually, works fine after that. Just won't load on startup. My server is named in my /opt/local/apache2/conf/httd.conf, I had read that sometimes makes a difference. I've done the launchctl unload and load trick, all with no results. I'm out of ideas.

    Read the article

  • How install ImageMagic 6.6.2 on Ubuntu 10.04 (lucid)

    - by Svyatoslavik
    How install ImageMagic 6.6.2 on Ubuntu 10.04 (lucid) Problem that lucid have old ImageMagic version(6.5.2) Its very important because me need work with SVG grafics, In my local pc I have ubuntu 11.04 and ImageMagic 6.6.2 and all work fine, In server I have 6.5... and I have problem. Reinstall ubuntu to 11.* this is no solution. I tried change /etc/apt/source.list from ubuntu 10.04 (lucid) to list from ubuntu 11.04 (natty) and update ImageMagic. After this action I have ImageMagic 6.6.2 (I looked phpinfo()) but ImageMagick is not work now. If I try do any action I get error: [error] 8996#0: *19983 FastCGI sent in stderr: "PHP Fatal error: Uncaught exception 'ImagickException' with message 'no decode delegate for this image format `/tmp/magick-XXnYKWKC' @ error/constitute.c/ReadImage/532' How it fix? Or how return to old version imagemagick? Problem if I try install from sources: /tmp/image/ImageMagick-6.7.2-7# ./configure configuring ImageMagick 6.7.2-7 checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking whether build environment is sane... yes checking for a BSD-compatible install... /usr/bin/install -c checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... no configure: error: in `/tmp/image/ImageMagick-6.7.2-7': configure: error: C compiler cannot create executables See `config.log' for more details /tmp/image/ImageMagick-6.7.2-7#

    Read the article

  • How to configure apache and mod_proxy_ajp in order to forward ssl client certificate

    - by giovanni.cuccu
    I've developed a java application that need a ssl client certificate and in the staging environment with apache 2.2 and mod_jk it is working fine. In production the configuration is not using mod_jk but mod_proxy_ajp. I'm looking for an apache configuration example that configure ssl and mod_proxy_ajp for sending the ssl client certificate to the java application server (which listens with the ajp protocol). Thanks a lot

    Read the article

  • Proxification rulte for System process

    - by kseen
    I'm trying to configure Microsoft Visual Studio 2010 remote debugging and ran into issue: while connecting to remote computer running MSVSMON, client computer sends SYN request for connection. It makes it under the System process (as I see it in TCPView). As every network apps should be configured to use proxy in our network, I'm trying to add devenv.exe to proxification rules to make its traffic goes thru LAN's proxy server. It doesn't help. So my question is how can I make that low-level-system traffic will go through local area network proxy server?

    Read the article

  • 1 document pending in printer queue in System Tray that won't go away

    - by White Phoenix
    Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

    Read the article

  • How to automate changing my ip?

    - by callisto
    I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

    Read the article

  • Windows 7 remains powered on when restarting

    - by BombDefused
    I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

    Read the article

  • IE9 will not navigate to some websites but Google Chrome can

    - by Storchburp
    Was recommended by a friend to ask for help here. I am using Internet Explorer 9. As of two days ago I was suddenly unable to navigate to any part of the following websites: www.computerandvideogames.com www.deviantart.com www.cnet.com However I can still access all of them normally through Google Chrome. I am on a college network but these sites are also accessible through fixed terminals provided by the school and are definitely not blocked. I do not know of any other sites similarly affected. There is no popup, no error message, no diversion to a site telling me I can't access / am blocked etc. I can be on www.google.com and attempt to access these sites through the URL or google search, and my cursor will just show the little moving blue wheel next to the arrow for a couple of seconds, and the page displayed on my browser will not change; ie. not navigating at all. Running antivirus software, changing proxy settings in IE, clearing cookies, unplugging/plugging in computer, restarting PC etc have not changed the situation. Any assistance or advice would be greatly appreciated. Thanks in advance.

    Read the article

  • Virtualbox two networks slow

    - by Petr Marek
    I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

    Read the article

  • Synergy: server refused client

    - by Tom
    I am trying to get Synergy up and running from a new Windows 7 computer, to an XP computer. The Synergy installations seemed to go fine. I configured each to start on start-up, which they seem to, but the client won't connect. I get repeated: "server refused client with our name" messages in the log output. The Synergy FAQ says to "Add the client to the server's configuration file." But I can't seem to find an instruction set on how to do this. I've looked and looked, but I'm lost...

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >