Daily Archives

Articles indexed Monday April 16 2012

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

• openldap search acl

  - by Patrick

  I'm trying to write an access control for OpenLDAP to allow a user to search with a certain base dn, but only get results back from certain sub dn's. I've played with lots of different rules but cant get it to work. I'm not sure its even possible. For example: I have the user with the dn uid=testuser,ou=people,dc=example,dc=com. I want this user to be able to search with a base of dc=example,dc=com and get back entries in ou=people,dc=example,dc=com. There are lots of other sub OUs under dc=example,dc=com, but only entries in ou=people should be returned (for bonus, I'd only like certain attributes to be returned as well). Can this be done?

  Read the article

• MySQL my.cnf file not being read, Ubuntu 10.04 64bit

  - by reallyordinary

  I've been researching this for a few hours with no luck. Basically it looks like my server's my.cnf file isn't being read at all. I've searched my server, and there's only one my.cnf file on it, located at /etc/mysql/my.cnf. Its ownership is root:root. I'm running Ubuntu 10.04 64bit on a Linode.com server. I have the latest versions of MySQL and PHP installed. I've edited the my.cnf file, commented out "skip-innodb", and have set innodb to be the default storage engine using default-storage-engine = innodb And then restarted mysql. But when I do show engines, MyISAM is still coming up as the default engine. Also - none of the innodb settings I've added to the my.cnf file are being read. For example, I have this in my.cnf: innodb_buffer_pool_size=4G But in phpmyadmin, InnoDB is showing as having a buffer pool size of 8,192 KiB. Similarly, I have this in the my.cnf: innodb_data-file_path = ibdata1:500M:autoextend But in phpmyadmin, it's reading as ibdata1:10M:autoextend. It doesn't look like MyISAM info is being read from the my.cnf file either. The my.cnf file has skip-external-locking queried out, but it's showing as "on" in phpmyadmin. So - yeah, it looks like nothing in the my.cnf file is being read at all. But the server still works. I'm running a Drupal site on it and it seems to operate fine. So mysql seems to be drawing default settings from... some mysterious secret location. Any idea how I can make mysql see and use this my.cnf file? Actually, wait - it looks like it may be being read, not sure. I checked the error.log and found this: 101128 4:28:52 [ERROR] Cannot find or open table databasename/cache_apachesolr from the internal data dictionary of InnoDB though the .frm file for the table exists. Maybe you have deleted and recreated InnoDB data files but have forgotten to delete the corresponding .frm files of InnoDB tables, or you have moved .frm files to another database? or, the table contains indexes that this version of the engine doesn't support. See http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html how you can resolve the problem. InnoDB: Error: auto-extending data file ./ibdata1 is of a different size InnoDB: 640 pages (rounded down to MB) than specified in the .cnf file: InnoDB: initial 32000 pages, max 0 (relevant if non-zero) pages! InnoDB: Could not open or create data files. InnoDB: If you tried to add new data files, and it failed here, InnoDB: you should now edit innodb_data_file_path in my.cnf back InnoDB: to what it was, and remove the new ibdata files InnoDB created InnoDB: in this failed attempt. InnoDB only wrote those files full of InnoDB: zeros, but did not yet use them in any way. But be careful: do not InnoDB: remove old data files which contain your precious data! 101128 4:28:52 [ERROR] Plugin 'InnoDB' init function returned error. 101128 4:28:52 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 101128 4:28:52 [ERROR] /usr/sbin/mysqld: unknown variable 'innodb_lock_wait_timout=50' 101128 4:28:52 [ERROR] Aborting 101128 4:28:52 [Note] /usr/sbin/mysqld: Shutdown complete

  Read the article

• Loading the 'pktgen' module on Ubuntu Server

  - by StackedCrooked

  I would like to enable and use the pktgen module on Ubuntu Server. I have enabed the module by adding a line containing 'pktgen' to the /etc/modules file. After rebooting it seems that the module is successfully loaded because the directory /proc/net/pktgen exists. However when trying to run the first sample I get these errors: root@ubuntu:~# bash ./pktgen.conf-1-1 Removing all devices Adding eth4 Setting max_before_softirq 10000 Configuring /proc/net/pktgen/eth4 ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory Running... ctrl^C to stop Done It turns out the script simply unable to write a file to the /proc/net/pktgen directory. When I try this manually it fails as well: root@ubuntu:~# cd /proc/net/pktgen/ root@ubuntu:/proc/net/pktgen# touch eth4 touch: cannot touch `eth4': No such file or directory Can anyone help me make it work? I'm using Ubuntu version: 2.6.32-21-server. Fixed I apologize for keeping this post not up to date. I was able to fix it. If I remember well the cause of the error was that eth4 did not exist, or did not have the 'online' status. Anyway, it is fixed now.

  Read the article

• Why would the 'show processlist' command speed up normally slow requests to my remote DB? (connected via VPN)

  - by Hakan B.

  I am running a local Django development server that connects to a remote MySQL server via a VPN (IPSec). Request times are awfully slow and I consistently see timeouts. Attempting to diagnose the problem, I logged in to the remote database and ran: show full processlist Immediately, the local server went from idle to working. The page had not yet completely loaded, but progress had been made (debug logs confirm this). When I ran 'show full processlist' several times more in succession, the request completed quickly. I can currently reproduce this - unless I run 'show full processlist' over and over on the remote server, my local request usually times out. Does anyone have any idea why this would happen? I'm running Django 1.3 and OS X 10.7. Note: I realize this may be entirely not be a question with a clear-cut answer and is probably my fault, but it is odd and reproducable, so I hope someone can at least point me the right direction. Thanks in advance.

  Read the article

• How well will ntpd work when the latency is highly variable?

  - by JP Anderson

  I have an application where we are using some non-standard networking equipment (cannot be changed) that goes into a dormant state between traffic bursts. The network latency is very high for the first packet since it's essentially waking the system, waiting for it to reconnect, and then making the first round-trip. Subsequent messages (provided they are within the next minute or so) are much faster, but still highly-latent. A typical set of pings will look like 2500ms, 900ms, 880ms, 885ms, 900ms, 890ms, etc. Given that NTP uses several round trips before computing the offset, how well can I expect ntpd to work over this kind of link? Will the initially slow first round trip be ignored based on the much different (and faster) following messages to/from the ntp server? Thanks and Regards.

  Read the article

• Setting up Linux VPN Client on Mint: Never sends "Set-Link-Info" packet

  - by cabanaboy

  I have tried to set up a VPN Connection on the Linux Mint disto, but could not get it working. When I use a Windows 7 VPN client it works fine. I brought up Wireshark on both Windows and Linux machine and noticed that on the Windows machine, the client never attempted to send the "Set-Link-Info" packet whereas the Windows (working) VPN client did. Why isn't the Linux Mint client sending the "Set-Link-Info" packet. I think if it did that, then my connection would work. What am I missing?

  Read the article

• Cannot connect to server via SSH

  - by Rayne

  I'm running RHEL 6.0, and I accidentally moved the /bin, /boot, /cgroup, console.txt, /data, /dev, /etc to another folder. I think I managed to move these folders back, but now I'm having trouble connecting to the server using SSH, but am able to access the server via VNC. When I tried to connect to the server using a terminal from another server, I get the error ssh_exchange_identification: Connection closed by remote host I'm currently still connected via SSH to the server (haven't closed the window yet), and am still able to access it normally. But if I try to open a new SSH terminal from my current session, I see /bin/bash: Permission denied If I try to open a new SSH File Transfer window from my current session, I get the error File transfer server could not be started or it exited unexpectedly. Exit value 0 was returned. Most likely the sftp-server is not in the path of the user on the server-side I checked and I have Subsystem sftp /usr/libexec/openssh/sftp-server which is the same path as the output of locate sftp-server Also, when I tried to restart sshd, I get the error Couldn't open /dev/null: Permission denied But my /dev/null has the permissions crw-rw-rw- for root,root. How can I resolve this? ETA: Thanks for all your help! I was able to start ssh by running the application directly /usr/sbin/sshd Even though the status of the openssh-daemon is still "stopped".

  Read the article

• Using a secondary DNS when lookup fails in primary? [migrated]

  - by Huckle

  I use a VPN to connect my development machine to my school's CS dept. The development machine is Ubuntu as we do C programming in Unix. I used vpnc to do that. The school uses some DNS entries that only resolve on their DNS servers, i.e., internalserver.csdept.school.edu I am normally attached to the VPN whenever booted for convenience. However I noticed the other day that when I disconnect the VPN all my DNS queries fail. This obviously means that vpnc set up the school's DNS to be used. However I'd rather not use their DNS all the time (tracking and privacy and whatnot). Is there a way I can restore my ISP's DNS and then if the lookup fails, have it use my school's DNS?

  Read the article

• What program should I use for SSL stripping and re-encrypting

  - by Sparksis

  I'm trying to strip a HTTP over SSL connection down to SSL and then re-encrypt the channel (with a signed certificate(s) I can provide). Of course I want to be able to store captures of all the un-encrypted data. The purpose of this is to reverse engineer a HTTP handshake that is used by a SIP program on my machine. I've tried SSLstrip but it doesn't support what I need it too. Edit: I want something to this effect https://github.com/applidium/Cracking-Siri/blob/master/tcpProxy.rb only more generic and able to write to a pcap stream that wireshark will understand (I'm not sure if this does that). Edit2: upon further inspection this does not create pcap streams. I guess if need be I can write a compatible version but that is not the desired choice.

  Read the article

• What might cause https failure when not specifying SSL protocol?

  - by user35042

  I have a VBScript program that retrieves a web page from a server not under my control. The URL looks something like https://someserver.xxx/index.html. I use this code to create the object that does the page getting: Set objWinHttp = CreateObject("WinHttp.WinHttpRequest.5.1") When I wrote my program it had no problem retrieving this page. Recently, the web server serving this page went through an upgrade. Now my program can no longer fetch the page. Some clues: Clue 1. I can fetch the web page if I use a browser (I tried Firefox, IE, and Chrome). Clue 2. The VBScript code yields this error: The message received was unexpected or badly formatted. Clue 3. I can fetch the web page from the command line in certain cases but not in others: curl --sslv3 -v -k 'https://someserver.xxx/index.html' # WORKS! curl --sslv2 -v -k 'https://someserver.xxx/index.html' # WORKS! curl -v -k 'https://someserver.xxx/index.html' # FAILS curl --tlsv1 -v -k 'https://someserver.xxx/index.html' # FAILS In the case where I do not specify a protocol I get this error: * SSLv3, TLS handshake, Client hello (1): * error:14077417:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert illegal parameter * Closing connection #0 In the case where I specify --tlsv1 I get this error: * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS alert, Server hello (2): * error:14094417:SSL routines:SSL3_READ_BYTES:sslv3 alert illegal parameter * Closing connection #0 A. Does anyone have any suggestions or ideas on what might be going on at the web server end (I am unable to talk to the admins of the web server to find out what they changed). B. Is there a way I can change my VBScript code to work around this issue? Can the SSL version be forced?

  Read the article

• How to install subversion on 1&1 server with windows?

  - by Miles M.

  I would like to start using Unfuddle for my project on 1&1 server. I never used subversion and core control before. So, I read a lot of documentation about it but each time, I get lost at the very beginning : I've downloaded the latest version of subversion. But on every tutorial, the way to follow is different. First I sae, on a lot of tuts, that you have to enter command lines. Is that ONLY for Linux ? Like here : http://chwalisz.org/2007/08/05/subversion-on-11-shared-hosting/ I also find something completely different on some website, I think (correct me if I'm wrong) it is the Windows tuts, deeply different frm the linu one. So I found that : http://www.codinghorror.com/blog/2008/04/setting-up-subversion-on-windows.html http://geekswithblogs.net/emanish/archive/2006/06/14/81905.aspx http://better-scm.shlomifish.org/subversion/Svn-Win32-Inst-Guide.html And I don t understand : Do I still have to put the sibversion file on the server ? Do I have to install Apach ? where, on my computer or on my server ? I'm working ith WampServer so I thing I have already Apach installed right ? When they say it is for Windows, do they mean it is for windows servers or for your own OS ? 'Cause my servers are on linux. How could I install Subversion on a 1&1 linux server from my W7 OS computer ? Thanks, that's a lot of question but that realle messy in my mind, I can't find something clear ..

  Read the article

• HP Recovery Manager failed creating a backup disc

  - by Baehr

  I had to restore my computer (running Windows 7) back to its factory default, so I ran the HP recovery manager disc and chose to reformat my computer. Before doing this I was given an option to backup my current files to a DVD, and I did so; getting the confirmation of a successful DVD burn. Booting up my computer everything looks like it did when I first purchased it (like expected). But when I pop in the backup DVD and run the recovery EXE inside it, the application creates a directory inside C:\System Recovery Files which contains the empty directories: [(^_^)] and Program Data. So essentially what I'm getting out of this is a failure in creating a back-up. Which is not only confusing but incredibly frusterating. Is there any way that I can recover the files lost in the

  Read the article

• What causes "A disk read error occurred, Press Ctrl + Alt + Del to restart"?

  - by Mehrdad

  I have a virtual machine containing Windows XP SP3. When I resized the VHD file (and the embedded partition), and tried booting, I got: A disk read error occurred Press Ctrl + Alt + Del to restart Some notes: FixBoot and FixMBR don't help. ChkDsk doesn't help. The partition is indeed active. The partition starts at sector 63 (it also did so before the problem) of cylinder 1, head 1, and is marked as type 0x07 (NTFS) My host OS reads the VHD and the partition completely fine I'm interested in knowing the cause rather than the fix. So "re-format the disk", "reinstall Windows", etc. aren't valid solutions. It's a virtual machine after all... I have nothing to lose, so I don't care about fixing it. I just want to know what's causing this problem, in case I run into it again on a physical machine (which I have done before). More info: The layout of the original, dynamic VHD (which works correctly): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 127.00GB CHS: 16578 255 63 ¦ ¦ Sectors: 266338304 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+ The layout of the resized, fixed-size VHD (which doesn't work): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 1.50GB CHS: 196 255 63 ¦ ¦ Sectors: 3149824 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+

  Read the article

• Keeping local windows folder in sync with remote ftp folder in real time

  - by bobo

  I know it has been asked before, but I would like it to happen in real time and transparently (without the need to open a separate FTP client such as FileZilla). For example, if I edit a text file in the local folder and then save it, it should immediately detect it and push the changes to the remote folder. It can be unidirectional (changes made on the local folder has to be pushed to the remote folder but the reverse is not necessary). It should also be able to specify some excluded files/folders which do not need to be in sync. Is there such an application that you know of?

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

  Read the article

• I want to hide my email address when I send an email from a Lotus Notes Group Email [closed]

  - by Shaun Casey

  Possible Duplicate: How do I change the Respond To for Group Email adresses in Notes 6.5 When I send an email from a group mail box the email shows my email address as the sender. I would like to hide my email and only show my name. I am using Notes 6.5. Could you please advise if there is a way to set up my client to do this. I want this so the receiver responds to the group email not my personal email as it may be that I am not the one to do the fillow up to the response. There are 10 people in the group email.

  Read the article

• Unable to delete duplicate pagefile.sys

  - by user128364

  I have one SQL server that contain two drives on it and both drives are on SAN. C drive contains OS and V drive Contain pagefile.sys file. I rebooted my server and both drives was unmapped on SQL server. Some How one drive came (the OS drive) and created pagefile.sys on C drive and then I rebooted my server remapped the v drive. Now I have two pagefile.sys on C and V drive. But under Advance setting only V drive option is checked as pagefile. How do delete duplicate pagefile on C drive. It showing me that " the program is being used" while deleting the pagefile

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• CodePlex Daily Summary for Sunday, April 15, 2012

  CodePlex Daily Summary for Sunday, April 15, 2012Popular ReleasesAssaultCube Reloaded: 2.4.1 Valor: POSSIBLE KNIFE CRASH FIX Codename Valor as suggested by LMFAO! on the forums Weapon tweaks Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included)callisto: callisto 2.0.25: removed 2 ip ranges from hotspot shield black list.KBCsv: KBCsv V1.4.0.0: #11872 (skipping records with delimited text can break parser) #11873 (globalization support in CsvWriter) #11185 (more versatile constructor and method overloads)National Geographic Photo of the Day Wallpaper Changer: Photo of the Day Wallpaper Changer v2.0: National Geographic - Photo of the Day Wallpaper Changer v2.0 is an improved version. It has some new features like improved GUI, automatic update and date to date photo archiver etc. please check out the user guide for more information. Please copy the exe in a directory and run. Its that simple to use :).Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.5.6: Bug Fixes nuget was broken for Timespan and complete build due to how i did the target. Corrected and made all 3 match. Color Slider (and by default Color Picker) didn't respect view state for being disabled depending on how it was set. Test application now has test cases.Json.NET: Json.NET 4.5 Release 3: Change - DefaultContractResolver.IgnoreSerializableAttribute is now true by default Fix - Fixed MaxDepth on JsonReader recursively throwing an error Fix - Fixed SerializationBinder.BindToName not being called with full assembly namesVisual Studio Team Foundation Server Branching and Merging Guide: v2 - For Visual Studio 11: Welcome to the BETA of the Branching and Merging Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation has been reviewed by the quality and recording te...Media Companion: MC 3.435b Release: This release should be the last beta for 3.4xx. A handful of problems have been sorted out since last weeks release. If there are no major problems this time, it will upgraded to 3.500 Stable at the end of the week! General The .NET Framework has been modified to use the Client profile, as provided by normal Windows updates; no longer is there a requirement to download and install the Full profile! mc_com.exe has been worked on to mimic proper Media Companion output (a big thanks to vbat99...Wholemy.LinkedLists: wholemy.linkedlists.2012.04.12.38: libs and srcTHE NVL Maker: The NVL Maker Ver 3.12: SIM??????，TRA??????，ZIP????。 ????????????????，??????~（??????????????????） ??????? simpatch1440x900 trapatch1440x900 ?????1400x900??1440x900，?????????????Data.xp3。 ???? ?????3.12?EXE????????????????， ??????????????，??Tool/krkrconf.exe，??Editor.exe， ???????????????「??????」。 ?????Editor.exe??????。 ???? ???? http://etale.us/gameupload/THE_NVL_Maker_ver3.12_sim.zip ???? http://www.mediafire.com/?je51683g22bz8vo ??Infinite Creation?? http://bbs.etale.us/forum.php ?????? ???? 3.12 ??? ???、????...Quick Performance Monitor: Version 1.8.2: Version 1.8.2. Add the ability for qpmset files to also store the Window location/size so predefined 'sets' can be forced to always open on the same place of the screen.SnmpMessenger: 0.1.1.1: Project Description SnmpMessenger, a messenger. Using the SNMP protocol to exchange messages. It's developed in C#. SnmpMessenger For .Net 4.0, Mono 2.8. Support SNMP V1, V2, V3. Features Send get, set and other requests and get the response. Send and receive traps. Handle requests and return the response. Note This library is compliant with the Common Language Specification(CLS). The latest version is 0.1.1.1. It is only a messenger, does not involve VACM. Any problems, Please mailto: wa...Python Tools for Visual Studio: 1.1.1: We’re pleased to announce the release of Python Tools for Visual Studio 1.1.1. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython and IronPython • Python editor with advanced member and signature intellisense • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging • Profiling with multiple view...Supporting Guidance and Whitepapers: v1 - Team Foundation Service Whitepapers: Welcome to the BETA release of the Team Foundation Service Whitepapers preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review All critical bugs have been resolved Known Issue...LINQ to Twitter: LINQ to Twitter Beta v2.0.24: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, and Client Profile. 100% Twitter API coverage. Also available via NuGet.Kendo UI ASP.NET Sample Applications: Sample Applications (2012-04-11): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.SCCM Client Actions Tool: SCCM Client Actions Tool v1.12: SCCM Client Actions Tool v1.12 is the latest version. It comes with following changes since last version: Improved WMI date conversion to be aware of timezone differences and DST. Fixed new version check. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively availab...Dual Browsing: Dual Browser: Please note the following: I setup the address bar temporarily to only accepts http:// .com addresses. Just type in the name of the website excluding: http://, www., and .com; (Ex: for www.youtube.com just type: youtube then click OK). The page splitter can be grabbed by holding down your left mouse button and move left or right. By right clicking on the page background, you can choose to refresh, go back a page and so on. Demo video: http://youtu.be/L7NTFVM3JUYLiberty: v3.2.0.1 Release 9th April 2012: Change Log-Fixed -Reach Fixed a bug where the object editor did not work on non-English operating systemsPath Copy Copy: 10.1: This release addresses the following work items: 11357 11358 11359 This release is a recommended upgrade, especially for users who didn't install the 10.0.1 version.New ProjectsADENA: This project consists in the development of a Graphical User Interface (GUI) for a proof assistant for Propositional Classical Logic based on Natural Deduction method.Alternity Warships Editor: This is a tool designed to easy the process of creating a new spaceship for Alternity using the Warship rules.BigBallz: Projeto de site de Bolões para campeonatos diversos. A princípio pensado para copa do mundo de futebol de 2010Crescent: bunch of mac scriptsDemoVasquez: Demo Proyecto 1Didrotuos: DidrotuosEat Out Advocate: Eat Out Advocate --------------------Kuttiflow: A simple implementation of Workflow for .NetLuan Van Cuoi Khoa: Lu?n van cu?i khoa ÐH Tây Nguyênmapaconwindowsphone: probar un mapa de bing mapsMovie Renamer: Is your movie collection a mess? No idea which movie is which? This tool easily renames movies based on the title and the year of the movie. Helps you sort out that movie collection! It will download from IMDB the closest matches based on the name of the file. Very simple written in WPF, so it will need the .NET 4 framework. At the moment you cannot set how you want to movie to be renamed, it will always be: "MovieTitle (Year).ext".Online Math Calculator: This is an Online Math Calculator. What this does is take your equation in the usual form and convert every variable to x, y, and every constant to a, b, c, d, e, etc... use wolfram|alpha and then convert back to the input format. This allows to input most equations.Orchard on Windows Azure with Dynamic Deploy: Dynamic Deploy is a cloud deployment platform. This project includes the Orchard source code that was used to create a Windows Azure build. The original source has not been modified. We have just added more themes and modules and modified web.config with a machine key. visit httppcvvpes: pcvvpesPesquisa de Satisfacao: PesquisaPit of Despair: An XNA 4.0 game in C# focused on learning to write overhead dungeon crawl games. Inpired from games such as Zelda, Wizardy, perhaps some original Final Fantasy.Prova Branquinho: Prova BranquinhoRibHat: RibHat is a framework for building websites, forums, blogs, and web-based information systems. It is a set of libraries that help the programmer to get rid from the immobility of CMS, obtaining a maximum level of customization.SetupWizard: a SetupWizard, install windows service, create IIS site, create database during installation.SharkOS: This operating system is the system Arkadia OS but with a GUI, it is created in c #, it will be fast and no lag.Shopping List: Shopping List is a simple WP7 application that enables tracking of items to buy when going for groceries.Sim Cricket: Cricket simulation game.. For cricket and C# fans.. Simple InterNET Daemon: Simple InterNET DaemonSteggy: Steganography project. SychevIgor Win8 Apps Source Code: SychevIgor Win8 Apps Source Codetest53768492156478: nothingTool to change monitor display frequency on HTPC: This is a small application that can change the monitors refresh-rate by simply running one of the applications for the desired refresh-rate. It was developed to make it easy to change the refresh rate, when launching external media players from XBMC and so on... And it was published here, so that others can see how easily it can be done.TravelSaver: Hajj Umrah USA, Travel SaverUpdateBot: UpdateBot is a GUI application that simplifies and automates the downloading and parsing of FileHippo.com's Update Checker result pages.

  Read the article

• John Hitchcock of Pace Describes the Oracle Agile PLM Customer Experience

  John Hitchcock, Senior Manager of Configuration Management at Pace (formerly 2Wire, Inc.), sat down for an interview during Oracle's Innovation Summit with Kerrie Foy, Manager of PLM Product Marketing at Oracle. Learn why his organization upgraded to the latest version of Agile and expanded the footprint to achieve impressive savings and productivity gains across the global, networked product value-chain.

  Read the article

• Do I suffer from encapsulation overuse?

  - by Florenc

  I have noticed something in my code in various projects that seems like code smell to me and something bad to do, but I can't deal with it. While trying to write "clean code" I tend to over-use private methods in order to make my code easier to read. The problem is that the code is indeed cleaner but it's also more difficult to test (yeah I know I can test private methods...) and in general it seems a bad habit to me. Here's an example of a class that reads some data from a .csv file and returns a group of customers (another object with various fields and attributes). public class GroupOfCustomersImporter { //... Call fields .... public GroupOfCustomersImporter(String filePath) { this.filePath = filePath; customers = new HashSet<Customer>(); createCSVReader(); read(); constructTTRP_Instance(); } private void createCSVReader() { //.... } private void read() { //.... Reades the file and initializes the class attributes } private void readFirstLine(String[] inputLine) { //.... Method used by the read() method } private void readSecondLine(String[] inputLine) { //.... Method used by the read() method } private void readCustomerLine(String[] inputLine) { //.... Method used by the read() method } private void constructGroupOfCustomers() { //this.groupOfCustomers = new GroupOfCustomers(**attributes of the class**); } public GroupOfCustomers getConstructedGroupOfCustomers() { return this.GroupOfCustomers; } } As you can see the class has only a constructor which calls some private methods to get the job done, I know that's not a good practice not a good practice in general but I prefer to encapsulate all the functionality in the class instead of making the methods public in which case a client should work this way: GroupOfCustomersImporter importer = new GroupOfCustomersImporter(filepath) importer.createCSVReader(); read(); GroupOfCustomer group = constructGoupOfCustomerInstance(); I prefer this because I don't want to put useless lines of code in the client's side code bothering the client class with implementation details. So, Is this actually a bad habit? If yes, how can I avoid it? Please note that the above is just a simple example. Imagine the same situation happening in something a little bit more complex.

  Read the article

• What are the best resources for learning about concurrency and multi-threaded applications?

  - by Zepee

  I realised I have a massive knowledge gap when it comes to multi-threaded applications and concurrent programming. I've covered some basics in the past, but most of it seems to be gone from my mind, and it is definitely a field that I want, and need, to be more knowledgeable about. What are the best resources for learning about building concurrent applications? I'm a very practical oriented person, so if said book contains concrete examples the better, but I'm open to suggestions. I personally prefer to work in pseudocode or C++, and a slant toward game development would be best, but not required.

  Read the article

• How do I make complex SQL queries easier to write?

  - by DragonLord

  I'm finding it very difficult to write complex SQL queries involving joins across many (at least 3-4) tables and involving several nested conditions. The queries I'm being asked to write are easily described by a few sentences, but can require a deceptive amount of code to complete. I'm finding myself often using temporary views to write these queries, which seem like a bit of a crutch. What tips can you provide that I can use to make these complex queries easier? More specifically, how do I break these queries down into the steps I need to use to actually write the SQL code? Note that I'm the SQL I'm being asked to write is part of homework assignments for a database course, so I don't want software that will do the work for me. I want to actually understand the code I'm writing. More technical details: The database is hosted on a PostgreSQL server running on the local machine. The database is very small: there are no more than seven tables and the largest table has less than about 50 rows. The SQL queries are being passed unchanged to the server, via LibreOffice Base.

  Read the article

• Zend - unable to catch exception [closed]

  - by coder3

  This still throw an uncaught exception.. Any insight why this isn't working? protected function login() { $cart = $this->getHelper('GetCurrentCart'); $returnValue = false; if ($this->view->form->isValid($this->_getAllParams())) { $values = $this->view->form->getValues(); try { $this->goreg = $this->goregFactory->create($this->config->goreg->service_url); if ($this->goreg->login($values['username'], $values['password']) && $this->goregSession->isLoggedIn()) { $returnValue = true; } else { echo 'success 1'; } } catch (Exception $e) { echo 'error 1'; } catch (Zend_Exception $e) { echo 'error 2'; } catch (Zend_Http_Client_Exception $e) { echo 'error 3'; } } return $returnValue; }

  Read the article

1 2 3 4 5 6 7 8  | Next Page >