Daily Archives

Articles indexed Wednesday June 27 2012

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Netcat (nc) traditional package for RHEL 6.x?

    - by HTTP500
    I'm trying to use the Percona Apache Monitoring [Cacti] Template for Memcached. They do indeed warn that you can't use the openbsd version of the package and provide a solution for Ubuntu/Debian users, i.e.: You need nc on the server. Some versions of nc accept different command-line options. You can change the options used by configuring the PHP script. If you don’t want to do this for some reason, then you can install a version of nc that conforms to the expectations coded in the script’s default configuration instead. On Debian/Ubuntu, netcat-openbsd does not work, so you need the netcat-traditional package, and you need to switch to /bin/nc.traditional... Since the RHEL 6.x version indeed comes from openbsd (confirmed by rpm -qi nc) how does one go about getting this installed on RHEL/CentOS? Anyone else running these Percona templates on RHEL/CentOS? What did you do? alien the Debian package? Update 1: FWIW, I tried to use GNU netcat by compiling it from source but it doesn't seem to have the exact options required by the Cacti template either (i.e. there is no analogy for -C or -q1 so it seems) Update 2: I alien[ed] the netcat-traditional_1.10-38_amd64.deb package to make a .tgz and it does produce a binary "nc.traditional" and that version has the -q option but no -C Cheers

    Read the article

  • IP route ppp0 + eth0 access to outside network

    - by Vitor
    I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

    Read the article

  • Memory usages in Linux drops frequently

    - by FunkyChicken
    I run a CentOS 5.6 (64bit) machine that has Nginx (latest version) running, with php-fpm (latest version). Things run very well, but since about 2 weeks I noticed in my Munin graphs that about every 2 hours the 'cache' usages drops. Before it used be a steady fully graph, that didn't seem to reset every so often. PHP-FPM settings: pm.max_children = 300 daemonize = yes pm = static listen = /tmp/fpm.sock pm.max_requests = 1000 I have checked the php-fpm.log, and about once per 5 seconds a child process is killed, and restarted. But this is all the time, so this does not explain the sudden drops. I only run Nginx, PHP (via fpm), Munin and vsftpd on this machine. No crons run at exactly the time of the drops. My question: What could be causing these drops in cache usage?

    Read the article

  • What's the most efficient way to reclaim disk space after deleting lots of data from a database on Sybase ASE 15?

    - by Ernie Longmire
    As I understand it, based on some research but zero real-world experience with Sybase ASE, the only way to reclaim disk space once it's been allocated to a database is to export that database, create a new DB with the same schema, and reload all the exported data to the new database. Is this correct, or is there some other method? Then: assuming the above is correct and a full export-recreate-reload is required, what's the most efficient way to do that? Are there tools that will automate all or part of that process? I'm being told we would have to write separate bcp export and import commands for each and every object in the database, which if true sounds easily scriptable by someone who knows Sybase ASE well enough. (I don't.) This seems to me like a really basic housekeeping task, and it feels like I'm missing something obvious.

    Read the article

  • Rsync Push files from linux to windoes. ssh issue - connection refused

    - by piyush c
    For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [[email protected] sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything. I am already having cwRsync installed on my widows and running it in daemon mode using --damemon option. And I am able to login using ssh from windows machine to linux machine. When I issue bellow command, it just blocks for 120 seconds (timeout I specified in command) and exits saying there is timeout. rsync -e "ssh -l piyush" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" After starting rsync on widows, I checked, rsyc is running. And widows firewall setting are set to minimal, and on Linux machine stopped iptables service so that port 873 (default rsync port) is not blocked. What can be the possible reason that Linux machine is not able to connect to rsync-daemon on windows machine?

    Read the article

  • OpenSSL Handshake Failure (14094410) - Erroneous Client Certificate Check from Mobile Phone

    - by Clayton Sims
    I'm running a proxy server through Apache with modssl, which we're using to proxy POSTs from mobile devices to another internal server. This works successfully for most clients, but requests from a specific phone model (Nokia 2690) are showing a bizarre handshake failure. It looks as though OpenSSL is either requesting (or attempting to read an unsolicited) client certificate from the phone (which is especially bizarre because j2me's kssl implementation doesn't support client certs). I've disabled client certificates with the SSLVerifyClient none directive in both the virtual host conf and the modssl conf. The trace from error.log on debug level is (details redacted): [client 41.220.207.10] Connection to child 0 established (server www.myserver.org:443) [info] Seeding PRNG with 656 bytes of entropy [debug] ssl_engine_kernel.c(1866): OpenSSL: Handshake: start [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: before/accept initialization [debug] ssl_engine_io.c(1882): OpenSSL: read 11/11 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 49/49 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90db] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 read client hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write certificate A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server done A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 flush data [debug] ssl_engine_io.c(1882): OpenSSL: read 5/5 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 2/2 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d5] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1879): OpenSSL: Read: SSLv3 read client certificate A [debug] ssl_engine_kernel.c(1898): OpenSSL: Exit: failed in SSLv3 read client certificate A [client 41.220.207.10] SSL library error 1 in handshake (server www.myserver.org:443) [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure [client 41.220.207.10] Connection closed to child 0 with abortive shutdown (server www.myserver.org:443) I've tried enabling all ciphers and all protocols temporarily with modssl, neither of which seemed to be the issue. The phone should be using RSA_RC4_128_MD5 and SSLv3, all of which are available. Am I missing something more fundamental about what's failing here? It seemed like the certificate request might have been part of a renegotiation failure. I tried enabling SSLInsecureRenegotiation On on the virtual host, in case it was an issue of the phone's SSL not supporting the new protocol, but to no avail. Currently running: Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o Apache proxy_html/3.0.1

    Read the article

  • Making Apache 2.2 on SuSE Linux Case In-Sensitive. Which is a better approach?

    - by pingu
    Problem: http://<server>/home/APPLE.html http://<server>/hoME/APPLE.html http://<server>/HOME/aPPLE.html http://<server>/hoME/aPPLE.html All the above should pick this http://<server>/home/apple.html I implemented 2 solutions and both are working fine. Not sure which one is better(performance). Please Suggest..Also Directive - CheckCaseOnly on never worked Option 1: a)Enable:mod_speling In /etc/sysconfig/apache2 - APACHE_MODULES="rewrite speling apparmor......" b) Add directive - CheckSpelling on (Either in .htaccess or add in httpd.conf) In httpd.conf <Directory srv/www/htdcos/home> Order allow,deny CheckSpelling on Allow from all </Directory> or In .htaccess inside /srv/www/htdcos/home(your content folder) CheckSpelling on Option 2: a) Enable: mod_rewrite b) Write the rule vhost(you can not write RewriteMap in directory. check apache docs ) <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> <VirtualHost _default_:80> <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on RewriteMap lc int:tolower RewriteCond %{REQUEST_URI} [A-Z] RewriteRule (.*) ${lc:$1} [R=301,L] </IfModule> </VirtualHost> This changes the entire request uri into lowercase. I want this to happen for specific folder, but RewriteMap doesn't work in .htaccess. I am novice in regex and Rewrite. I need a RewriteCond which checks only /css//. can any body help

    Read the article

  • How to disable all bounce back email in exim 4.69

    - by liame
    I have set up an email server to send out solicited newsletters. There should be no "regular" users of this server, so it is not desirable to send bounce notifications back to the recipient. Especially so since I am tracking bounces myself by parsing the log files periodically. What I want is to unconditionally prevent exim from ever sending a bounce notification email back to a sender. How can I do this? Thank you! (I accidentally posted this to superuser before posting it here, disregard that if you come across) What I want is an email server that will accept all incoming emails, deliver it accordingly (that is remotely or locally) and not send a bounce notification the sender upon bounce. I log bounces myself, in a database. The only function bounce messages have in my setting is to waste resources and bandwidth. I need to send emails fast, using exiwhat during a run, I see a significant number of deliveries to [email protected] I could potentially increase my email productivity by 10~20% if all bounce emails are eliminated.

    Read the article

  • PHP 5.3.5 Windows installer missing php_ldap.dll

    - by nmjk
    I'm working with Windows Server 2008, Apache 2.2. I'm using php-5.3.5-Win32-VC6-x86.msi as the installer, using the threadsafe version. I've gone through the install process four or five times just to make sure that I'm not missing anything ridiculous, but I don't think I am. The problem is that the php_ldap.dll extension simply doesn't seem to exist. It's not present in the installer interface (where the user is asked to choose which extensions to install), and it definitely doesn't appear in the ext/ directory after install. I found a lot of mentions of this issue for 5.3.3, including links to download the extension individually. Those links no longer exist, of course, and besides: they were for 5.3.3. I'd really rather use an extension that belongs with PHP 5.3.5. Anyone else encounter this problem? Any ideas as to what's going wrong? Anyone seen acknowledgement by the PHP folks that the file is indeed missing, and that it's an oversight? It's quite a frustration because the server I'm building has no purpose if I don't have PHP LDAP support. Cheers all, and thanks in advance for your assistance.

    Read the article

  • ssh_exchange_identification: Connection closed by remote host?

    - by user51684
    debug1: Connection established. debug1: identity file /home/DAMS/.ssh/id_rsa type 1 debug1: identity file /home/DAMS/.ssh/id_rsa-cert type -1 debug1: identity file /home/DAMS/.ssh/id_dsa type -1 debug1: identity file /home/DAMS/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host hello this one is different . no missing or anything. im using cygwin. and it just stop when im doing git push production on my server. usually its ok, but i dont know why its stop connections i wonder whats wrong.

    Read the article

  • How use DNS server to create simple HA (High availability) of my website?

    - by marc22
    Welcome, How can i use DNS server to create simple HA (High availability) of website ? For example if my web-server ( for better understanding i use internal IP in real it will be other hosting companies) 192.168.0.120 :80 (is offline) traffic go to 192.168.0.130 :80 You have right, i use bad word "hight avability" of course i was thinking about failover. Using few IP in A records is good for simple load-balancing. But not in case, if i want notice user about failure (for example display page, Oops something is wrong without our server, we working on it) against "can't establish connection". I was thinking about setting up something like this 2 DNS servers, one installed on www server Both have low TTL on my domain, set up 2 ns records first for DNS with my apache server second to other dns If user try connect he will get ip of www server using first dns, if that dns is offline (probably www server is also down) so it will try second NS record, what will point to another dns, that dns will point to "backup" page. That's what i would like to do. If You have other idea please share. Reverse proxy is not option, because IP of server can change, or i can use other country for backup.

    Read the article

  • How to view special characters in SQL Management Studio

    - by B Z
    Sql 2005 I have a text column that has special characters stored e.g. CR, LF, but I don't know what they are. I would like to view these characters in management studio. Something like in Notepad ++ Show Symbol Show All Characters. My Goal: I am working on a data conversion from one database to another. When the data is converted and viewed in the native application it is displaying some funky characters like a pipe character. I would like to eliminate these characters during the conversion process.

    Read the article

  • Backup Exec 12.5 or 2010? [closed]

    - by Chris Thorpe
    Backup Exec 2010 has just dropped, and I'm about to implement a new BEWS infrastructure, complete with CALs and new central servers. When I specced this up last year, I ignored 2010 and focused on Backup Exec 12.5, since it's a mature product. In previous experience, major released of BE had numerous technical issues and seemed to improve significantly at the first service pack. However, our refresh cycle on the backup infrastructure is slow, the main driver usually being lack of support for some new server type (in this case, ESX has driven our current upgrade need). With this in mind, I'm wondering if Backup Exec 2010 should be my first choice, as it'll last longer under current support than 12.5, which will approach EOL soon. Has anyone got any perspective they could add to this? Right now, I'm leaning towards biting the bullet and going with 2010.

    Read the article

  • Should you disable page file with SSD?

    - by Pyrolistical
    I've been reading this question, and it has a lot of great information. But assuming you have more than enough ram, I think page file should be disabled on SSD to extend the life time. I know you would lose the core dump on crash, but not many people need that information. From my understand without a page file as you reach the limit of your ram that might trigger thrashing on disk. But for SSDs there is no concept of thrashing, reads are fast. What do you guys think?

    Read the article

  • Weirdness After Reinstall The Windows Operating System

    - by Eka Anggraini
    I want to ask, and ask advice from you guys. I have reinstall my OS and successful, I'm turn off the restart a few times is fine .. Later a few hours later, when I turn it on, a sudden there was an error : Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM Select 'R' at the first screen to start repair. So I intend to repair, reinstall all again .. I enter cd windows : press any key .. with blue background text below: Setup is loading files (windows executive) Setup is loading files (hardware abstraction layer) Then I was waiting until half an hour, and no changes, I repeated the process several times is also nil. Please advice and solutions about the problem where? Hardware / cd Windows ?

    Read the article

  • How to setup VIM for php development?

    - by Ashwin kumar
    I have been trying a lot (but not smartly) to figure out setting up VIM, ctags, omnicomple for PHP development. On Googling I found this file. But have no clue how to use it. What have I done until now? Here it is: I am on Fedora 17 64-bit OS Logged in as root Found my VIM version to be VIM - Vi IMproved 7.3 (2010 Aug 15, compiled May 8 2012 15:05:51) Followed the install details as here http://www.vim.org/scripts/script.php?script_id=3171 install details Place in $HOME/.vim/autoload/phpcomplete.vim and enable the php ftplugin What else I am missing? How do I start using omnicomplete. (this is the first time I am using omnicomplete) Why didn't I try IDE's? I have a single core machine running LAMP stack. Didn't wanted to slow down everything and hence sticking to command line environment.

    Read the article

  • Getting chrome to distinguish between search engine query or URL entry?

    - by RoboShop
    So I use the quick search engine thing on chrome a lot. I type "w superman" if I want to find the wikipedia article for superman and even "tfs 13323" if I want to find the work item in TFS. The only problem is that with Google's new auto complete thing, sometimes I'll type in tfs 13030 and I'll get taken to the google search page having searched for "tfs 13030". The only way I can get rid of this is to clear my browser history. I guess the problem with using search and url on both the same bar is it gets confused about whether ur searching or ur entering a url. Is there a way around this?

    Read the article

  • Populating a drive that was formated to ntsf on seperate computer

    - by Will Love
    I recently downloaded some files that were over 4gb and wouldnt do a straight transfer to a external hd. this is all being done on a serperate computer we shall call computer1. my computer(computer2) is where im trying to get the files too. i used cmd to "Soft format" the drive to NTSF on computer1 so i could then take the drive to transfer the files to computer2. this was suppose to allow the format change without losing the files i had on there already... after the proccess was done i checked the drive on computer1 and all the old files were there and working....when i took the drive back to computer2 to transfer the files i had just downloaded from computer2 my computer...computer1:wont reconize or populate the external drive so it can give it a drive letter and function. the external drive works fine on computer1, but how do i get it to work again on computer2? when i try to populate it, i cant access the properties function in order to make permissions for everyone so it is reconized....any help would be greatfull..... also i am running windows 7 ultimate edition if that helps.

    Read the article

  • unix command to verify span of word in text

    - by Ocasta Eshu
    What unix command(s) can I use to determine the line span that a word appears in text? The "span" being equal to the line number of the last instance of a word minus the line number of the first instance of the word. 1| unix is on two lines 2| once above, and once below 3| unix In the example above the "span" of 'unix' would be 2 (3-1). So far I've been trying to make use of grep -n but I don't think that grep is powerful enough. Maybe some use of sed or awk? Thanks!

    Read the article

  • Ignore mapping when in text input box

    - by Art
    I have AutoHotkey set up in a way that is recognises Cmd-Left and Cmd-Right keystrokes as back/forward navigation in Chrome. Problem is that it also recognises those keys being pressed while I am entering text in textboxes. However when entering text, I'd would like those key combinations to carry out different function - jump to beginning/end of the line, similar to Ctrl-Left/Right. Is there a way to have one mapping working for text boxes and another mapping for everything else in AutoHotkey?

    Read the article

  • How to delete/detect what terminal software I have?

    - by Mike G
    On mac osx terminal, I installed many terminal programs while trying to install a programming library. Now I'm wondering how I delete them. I think some of them include pip, macports, vmenven (or something). I'm not sure what these programs are called but they all are called from the command line using something like "macports..." (so I'm calling them terminal programs). First, how do I tell what terminal programs are installed. Second, how do I delete them. And, to be through, where are the programs stored anyway?

    Read the article

  • The laptop overheat when use linux ubuntu

    - by Rienna
    I use 2 operating system in my laptop. I am using windows 7 and ubuntu 12.04 When I use ubuntu, it's often make my laptop turned into overheat and sometimes turned off suddenly. Why it happen? Is it caused damage to my hardware or because I am using 2 OS? My laptop'specification Processor : Intel(R)Core(TM)2 Duo CPU T6600 @ 2.20Ghz 2.20 GHz RAM : 2 GB System type : 64-bit Operating System

    Read the article

  • Keep only "lock" a single app open in iOS?

    - by CT.
    Is there anyway to "lock" open a single app in iOS? My use case for this is simple. There are many apps and games designed for children. While these applications are appropriate for children, many other applications installed on an iPad are not. But even more so than protecting them from inappropriate content, I would just like to prevent them from leaving the application. They accidentally hit the home button or multi-touch gesture out of the application. I know you can turn gestures off. Developers also have links to their website or other related applications. Kids are constantly exiting the application and then bringing the device to me asking "Can you get me back into the game?" every couple minutes. How can I hand a child an iPad with "Angry Birds" running and make sure only "Angry Birds" runs? Cydia or jailbreak tweaks welcome. Thanks.

    Read the article

  • error: cannot fork() for status: Resource temporarily unavailable (git)

    - by Elnaz Shahmehr
    when I want to do something: add , remove, pull , push in github, I just have this error in my terminal Thanks in advance! selnaz:iOS-Tidinfo Lnaz$ git add . error: cannot fork() for status: Resource temporarily unavailable fatal: Could not run git status --porcelain fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed fatal: git status --porcelain failed Edit: selnaz:iOS-Tidinfo Lnaz$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 256 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 709 virtual memory (kbytes, -v) unlimited Edit2 selnaz:iOS-Tidinfo Lnaz$ ps xfu | wc -l ps: illegal option -- f usage: ps [-AaCcEefhjlMmrSTvwXx] [-O fmt | -o fmt] [-G gid[,gid...]] [-u] [-p pid[,pid...]] [-t tty[,tty...]] [-U user[,user...]] ps [-L] 0

    Read the article

  • How can I most efficiently batch resize images on a Mac?

    - by Nick Douglas
    I've been batch-resizing images through Preview (OS X) through the menu bar, but I want a simpler workflow, since I do this a dozen times a day. What I want: 1. Select a group of image files in finder 2. Hit a button or two (menu item or keyboard shortcut) to do the following: a. Scale all the pictures to 600 pixels wide b. Save as JPG files at 75% quality What I also want: - All of the above, plus step a(1): Crop images to 200 pixel height I can do all that manually, to a batch of files, through Preview. I can do it one at a time with some keyboard shortcuts in Photoshop or Pixelmator. Automator (using Preview) can scale to 600 pixels on the longest dimension, but it doesn't let me specify width. (It can scale specifically to width before cropping height.) It can change to JPG, but it can't specify image quality. And I can assign a keyboard shortcut to the whole process. Is that my best option on a Mac? Can I accomplish this more efficiently through another app like Quicksilver?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >