Daily Archives

Articles indexed Saturday June 30 2012

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Squid not caching

  - by Abhishek Chanda

  I am trying to configure Squid as a caching server. I have a LAN where The webserver (apache) is at 192.168.122.11 squid is at 192.168.122.21 and my client is at 192.168.122.22. The problem is, when I look at Squid's access log, all I see are TCP_MISS messages. It seems Squid is not caching at all. I checked that the cache directory has all proper permissions. What else can go wrong here? Please let me know if I need to post the configuration

  Read the article

• Can my email address be revoked? [closed]

  - by Name

  I did some work with an organization and had a falling out, so I left them. They used postfix to have [email protected], and I had one. I set up gmail to get my mail via POP as well as to "send mail as @_.com". I think for a long time they forgot to delete my email address and now it seems that I can send but not receive mail at the address. What could a possible explanation for this be? Can they revoke delivery but not sending from the address? Why would they only revoke one if they cna revoke both? Is it more tedious or difficult a task to revoke sending? Thanks

  Read the article

• How can I tell what user account is being used by a service to access a network share on a Windows 2008 server?

  - by Mike B

  I've got a third-party app/service running on a Windows 2003 SP2 server that is trying to fetch something from a network share on Windows 2008 box. Both boxes are members of an AD domain. For some reason, the app is complaining about having insufficient permissions to read/write to the store. The app itself doesn't have any special options for acting on the authority of another user account. It just asks for a UNC path. The service is running with a "log on as" setting of Local System account. I'd like to confirm what account it's using when trying to communicate with the network share. Conversely, I'd also like more details on if/why it's being rejected by the Windows 2008 network share. Are there server-side logs on 2008 that could tell me exactly why a connection attempt to a share was rejected?

  Read the article

• How to DNAT to different local IP based on what public IP was accessed with Shorewall?

  - by mikl

  My server has several public IPs, and is running a bunch of virtual machines with private IP adresses. As an example, I want to map ports 80, 443 and 8080 on 232.21.23.23 (public) to 192.168.122.12 (private). I have tried a couple of different NAT mappings, but none of them seem to work: # This doesn't work. DNAT net loc:192.168.122.12 tcp 80,443,8080 - 232.21.23.23 # Neither does this. DNAT $FW loc:192.168.122.12 tcp 80,443,8080 - 232.21.23.23 # Nor this. DNAT net:232.21.23.23 loc:192.168.122.12 tcp 80,443,8080 # I have no idea what I'm doing. DNAT $FW:232.21.23.23 loc:192.168.122.12 tcp 80,443,8080 Can anyone point me in the right direction?

  Read the article

• How do I restart MySQL in monit when page contains specific text?

  - by Tyler

  How do I check if a web page contains the text "Error connecting to database" and if the text exists in the page restart the database? Here's what I have so far but it isn't working: check host website.com with address website.com group database start program = "/usr/bin/service mysql start" stop program = "/usr/bin/service mysql stop" if url http://website.com content == "Error connecting to database" then restart

  Read the article

• NFS and KVM. Slow Speed

  - by Javier Martinez

  I have a KVM virtualization in Debian with 2 guests (Debian and Windows 2008). I want to have a 'mount point' shared that can be accessed by the 3 system (host and 2 guests) at the same time. So the only thing that I found was a NFS/SMB network storage. I picked NFS Due to my Ethernet network (10/100), the speed average that I get between accessing/transfering files between the 3 system is always 8~10MB/s. The point is if is there any chance of get a boost system for sharing files between 3 system (at the same time) without wasting the speed of my SATA disks. I mean, without the Ethernet limitation of 10 MB/s

  Read the article

• How does a vsftpd server work and how to configure it?

  - by ysap

  I was asked to configure a FTP server, based on the vsftpd package. The server is running on a remote machine to which I have a superuser privilege access. Being unfamiliar with the mechanics of FTP servers, I tried to figure out how user ftp accounts are configured. The previous maintainer used a shell script, which works on a list that we maintain to track users accounts and passwords, to configure the ftp accounts. From reading the script, I see that he generates a list of usernames and passwords, and actually creates a user account on the Linux machine. This means that for each user that we configure in the list, a new user account is being added by the adduser command: adduser --home /home/ftp --no-create-home $user (but w/o a private /home/username directory - using the /home/ftp instaed). Each of these users can log into his account using the ssh command. This fact seems a little strange to me, as I'd think that the ftp account should be decoupled from the Ubuntu user accounts. As another side effect, when a user connects using a web browser, he is connected to the /home/ftp directory. However, he can then use "Up to a higher level directory" link to go up and effectively have access to all of our system. So, the questions are: Is this really how the FTP server supposed to work in terms of configuring ftp accounts? If not, how do I configure the vsftpd server in a way that I have only the superuser Ubuntu account on that machine and all ftp account are... just FTP user accounts? Additionally, these ftp account should be configured in terms of how and what they are allowed to access.

  Read the article

• How to disallow use of disable_functions in?

  - by Gaia

  I'm obviously not the first one to have this problem, but I cannot not find an answer to this situation. I want to lock down PHP a bit, more specifically the use disable_functions. The environment is CentOS 6.2/PHP 5.3.3 fcgid/Apache 2.2.15: Whats the proper apache config (AllowOverride, etc) to disable any PHP setting to be changed via .htaccess? All other overrides are ok (current setting is AllowOverride All) Whats the proper config to forbid effective use of disable_functions in all but the master php.ini (as in forbid use of disable_functions in /home/myvhost/etc/php5/php.ini or any directory within in that vhost public_html. another way to say this: the only effective disable_functions comes from the master php.ini)? If #2 is not possible, at least whats the proper config to disallow a vhost owner to effectively use any php.ini but the vhost main one (/home/myvhost/etc/php5/php.ini)? Thanks

  Read the article

• Socket(TCPIP) Unstable

  - by Lee Kwan Wee

  I have a setup of a SCPI server in a Win7 PC and have 2 other programs talking to it locally(127.0.0.1) over TCPIP socket 5025 and 5029. This worked well and stable in a fresh PC, but when we moved it into our production lines and the IT dept added their policies and stuff, it became unstable. The PC is connected to the production floor server but both of the programs are running locally in the PC. The connection tends to be disconnected when there is an idle period. And it takes 5-6times to refreshing the connection to get it back. I'm not a programmer myself, so I'm hoping to see if anyone here can help with some answers. Thank you very much!! Regards, KwanWee.

  Read the article

• Remote Desktop failed logon event 4625 not logging correctly on 2008 Terminal Services server

  - by Zone12

  When I use the new remote desktop with ssl and try to log on with bad credentials it logs a 4625 event as expected. The problem is, it doesn't log the ip address, so I can't block malicious logons in our firewall. The event looks like this: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{00000000-0000-0000-0000-000000000000}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2012-04-13T06:52:36.499113600Z" /> <EventRecordID>467553</EventRecordID> <Correlation /> <Execution ProcessID="544" ThreadID="596" /> <Channel>Security</Channel> <Computer>ontheinternet</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">notauser</Data> <Data Name="TargetDomainName">MYSERVER-PC</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc0000064</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">NtLmSsp</Data> <Data Name="AuthenticationPackageName">NTLM</Data> <Data Name="WorkstationName">MYSERVER-PC</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">-</Data> <Data Name="IpPort">-</Data> </EventData> </Event> It seems because the logon type is 3 and not 10 like the old rdp sessions, the ip address and other information is not stored. The machine I am trying to connect from is on the internet and not on the same network as the server. Does anyone know where this information is stored (and what other events are generated with a failed logon)? Any help will be much appreciated.

  Read the article

• Secure PHP environments with PHP-FPM and SFTP

  - by pdd

  I'd like to set up secure environments for a small number of untrusted PHP websites on a Debian server. Right now everything runs on the same Apache2 with mod_php5 and vsftpd for administrative file access, so there is room for improvement. The idea is to use nginx instead of apache, SFTP through OpenSSH instead of vsftpd and chrooted (in sshd_config), individual users for each website with their own pool of PHP processes. All these users and nginx are part of the same group. Now in theory I can set 700 permissions on all PHP scripts and 750 on static files that nginx has to serve up. Theoretically, if a website is compromised all the other users' data is safe, right? Are there better solutions that require less setup time and memory per website? Cheers

  Read the article

• anyone doing php-fpm and APC? cache files missing in /tmp

  - by Vangel

  I have been using xcache for a long time. Recently I put together php-fpm and nginx. I see apc is installed and enabled in the configuration. I was assuming that apc will automatically opcode the files and store it somewhere. According to config it should be in /tmp/apx.xxxx but there is no such thing there. What am i missing? any clues to investigate would be of much help. Please note I am using php 5.3 fpm. thanks mates. UPDATE: i looked at apc.php it says things are fine. will just have to take its word for it.

  Read the article

• How to setup a 1 way trust, Windows Server 2008 R2

  - by MichaelOz

  I am on my home network and connect to workplace via a VPN. I have a DC on my home network (DC1 , domain = home). How can I setup a 1 way trust, so that I am able to run executables, such as SQL Management Studio using RunAs - then type in credentials for work domain? First question is, will a 1 way trust solve this, and can I set this up without bothering a network admin at workplace (assuming I have a domain account with enough permissions on work domain) If yes - any good step by step guide to setup 1 way trust? Server is Windows Server 2008 R2. As mentioned its DC running DNS Role too. Thanks in advance

  Read the article

• Help: Setup Outgoing Mail Server Only for Multiple Domains Using Postfix?

  - by user57697

  I want an outgoing mail server ONLY for multiple domains. I plan to use Postfix as that seems to be the easiest to setup being very new to Ubuntu/Linux. The setup I plan to have are as follows: I want to use virtual domain with postfix i.e. my multiple websites must be able to send an email from each their respective domains i.e. [email protected] is sent from my domain1.com website and [email protected] is sent from domain2.com website This is an outgoing mail server only i.e. I don't want any returned (or otherwise) email sent to my postfix server. Incoming mail is handled by Google Apps/Gmail and is already setup. I already set my SPF recording to designate my mx records and postfix server ip as valid email servers i.e. "v=spf1 mx include:mydomain.com -all" How can I achieve this? I'm frankly a little confused, so some help would be appreciated. I attempted to follow these guides here, but it doesn't seem right (and it isn't clear what all the settings mean): How to configure Postfix virtual domains http://www.sysdesign.ca/guides/postfix_virtual.html Postfix Installation *.slicehost.com/2008/7/29/postfix-installation Basic Postfix settings (main.cf) *.slicehost.com/2008/7/31/postfix-basic-settings-in-main-cf I can only post one link, but those articles above can be found by replacing * with articles in the hyperlink.

  Read the article

• software RAID array not starting in initramfs on Debian

  - by Jasper

  One of my Debian servers (kernel 2.6.30-AMD64) refuses to start the software RAID array that houses the root partition in initramfs. It dumps me with a busybox console. When I follow the necessary steps to continue booting it works fine (start the array with mdadm -A and then have LVM scan the volumes with pvscan and then vgchange -ay). I've tried starting with boot options rootdelay=10 to no avail. Also I've updated the initramfs and unpacked it to inspect whether it really tries to assemble the raid array (it does). Output before dumping to console : mount: mounting none on /dev failed: No such device W: devtmpfs not available, falling back to tpmfs for /dev and then some lvm messages saying it can't find the volumes holding the root partitions. Does anybody have a clue how I could fix this?

  Read the article

• dedicated server - cgi-sys/defaultwebpage.cgi redirect when accessing via server IP

  - by Ross

  This isn't so much of a problem, but would like to know why this happens. we have a dedicated server running WHM. If I access the server via its IP address directly I am automatically redirected to http://xx.xxx.xx.xxx/cgi-sys/defaultwebpage.cgi I know how to edit this page (this isnt the problem) I'm just curious why I get redirected to this .cgi page, rather than simply remain @ xx.xxx.xx.xxx/ and view my default "landing page", if you like. What setting could I change so that if anyone visits my server IP, they do not get redirected to xx.xxx.xx.xxx/cgi-sys/defaultwebpage.cgi For instance if you visit 173.194.37.104 (google), you view the google home page, but URL remains the same. Hope this makes sense. thanks

  Read the article

• How to create a text file from column and FTP that text file to server

  - by addi

  I have workbook with 2 sheets (Sheet1 and sheet2). On sheet1 user will enter the data which will be populated in the column B and then column C will hold the values from Col A and B on sheet2. I need to create a text file from the values in coloumn C on a click of a button and then upload(FTP) that file to a server. So the sheet1 will have 2 buttons. Button1 will save the excel file and create the text file in windows temp directory. e.g text.xls text.prop (text file whoch has all the values in column C on sheet2) Button2 will upload (FTP) the text file (.prop) to a server. Can anyone please send me the steps and VB code to achieve the above tasks? Thanks in Advance Addi

  Read the article

• Pidgin: a me-specific log file?

  - by Wolfpack'08

  I'm trying to make a compilation file of all the text sent by me and all the responses that included my name.... What's the best way about scripting this? Is there a plugin like that for pidgin? I'd also like to be able to click on lines to add. For example, someone gives a really useful, easy-to-follow guide to another user, and I think: "I'm going to be doing that tomorrow." Rather than marking and pasting every line of it and skipping through all the other convo, I would like to be able to just click 'send to my personal log,' or something. It seems quite useful, right? And I think that a lot of people would use it. So, please try to provide a comprehensive answer, if possible, or one that I can follow through on.

  Read the article

• How do I troubleshoot a slow hard drive?

  - by Bruce Connor

  My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

  Read the article

• Make dhcp assign same IP and hostname for different interfaces at one machine

  - by Egeshi

  I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

  Read the article

• FTP timeout only the first time

  - by user1474681

  I'm using PureFTPd on MacOSX (Snow Leopard, not server version). When trying to access the FTP account from the outside via dyndns (e.g. using https://www.wormly.com/test_ftp_server) the connection always times out the FIRST time. When I try AGAIN in the next few seconds it works. What is this about? I have forwarded the ports to my apple router and tried disabling the OSX firewall as well. Thanks for any advice. Dennis

  Read the article

• Wifi network undetectable on a Lenovo G470

  - by Rex

  I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

  Read the article

• SATA HDD not recognized by BIOS after Windows 7 reinstall

  - by RoliSoft

  I got Win32.Virut.56 virus, which is a very nasty stuff. I reinstalled my Win7, but it reappeared somehow. After hours of headache, I was able to remove it by booting into a live Ubuntu and running CureIT using Wine. I then started reinstalling Windows 7. After the "expanding files" stage it rebooted, however from that point on, my 160 GB Western Digital SATAII hard drive was not recognized. The bios just freezes at "SATAII 1: Detecting...". My other 1.5 TB Seagate SATAII hard drive works correctly. I tried switching cables; that didn't help. I googled this issue, but what came up were usually firmware problems. I can't update the firmware or do anything at all, because if I plug it in, it won't start. My motherboard is an ASRock 4Core1333-Viiv, if that helps. I'm now stuck on a live Ubuntu. I can't install Win7 on the 1.5 TB drive, because it's full of data I need. What do you think I could try to make the hdd work again? As for the moment, I don't have another computer to try if that one recognizes the hdd.

  Read the article

• CodePlex Daily Summary for Friday, June 29, 2012

  CodePlex Daily Summary for Friday, June 29, 2012Popular ReleasesSupporting Guidance and Whitepapers: v1 - Supporting Media: Welcome to the Release Candidate (RC) release of the ALM Rangers Readiness supporting edia As this is a RC release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these RC artifacts in a production environment. Quality-Bar Details All critical bugs have been resolved Known Issues / Bugs Practical Ruck training workshop not yet includedDesigning Windows 8 Applications with C# and XAML: Chapters 1 - 7 Release Preview: Source code for all examples from Chapters 1 - 7 for the Release PreviewDataBooster - Extension to ADO.NET Data Provider: DataBooster Library for Oracle + SQL Server Beta2: This is a derivative library of dbParallel project http://dbparallel.codeplex.com. All above binaries releases require .NET Framework 4.0 or later. SQL Server support is always build-in (can't be unplugged). The first download (DLL) also requires ODP.NET to connect Oracle; The second download (DLL) also requires DataDirect(3.5) to connect Oracle; The third download (DLL) doesn't support Oracle. Please download the source code if the provider need to be replaced by others. For example ODP.NE...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.57: Fix for issue #18284: evaluating literal expressions in the pattern c1 * (x / c2) where c1/c2 is an integer value (as opposed to c2/c1 being the integer) caused the expression to be destroyed.Visual Studio ALM Quick Reference Guidance: v2 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Masashi Fujiwara (?? ??), localized and reviewed the Quick Reference Guidance for the Japanese communities, based on http://vsarquickguide.codeplex.com/releases/view/52402. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...Visual Studio Team Foundation Server Branching and Merging Guide: v1 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Hirokazu Higashino (?? ??), localized and reviewed the Branching Guidance for the Japanese communities, based on http://vsarbranchingguide.codeplex.com/releases/view/38849. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...SQL Server FineBuild: Version 3.1.0: Top SQL Server FineBuild Version 3.1.0This is the stable version of FineBuild for SQL Server 2012, 2008 R2, 2008 and 2005 Documentation FineBuild Wiki containing details of the FineBuild process Known Issues Limitations with this release FineBuild V3.1.0 Release Contents List of changes included in this release Please DonateFineBuild is free, but please donate what you think FineBuild is worth as everything goes to charity. Tearfund is one of the UK's leading relief and de...EasySL: RapidSL V2: Rewrite RapidSL UI Framework, Using Silverlight 5.0 EF4.1 Code First Ria Service SP2 + Lastest Silverlight Toolkit.NETDeob0: NETDeob 0.1.1: http://i.imgur.com/54C78.pngSOLID by example: All examples: All solid examplesSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1726.406): Use of new version of connection controls for a full support of OSDP authentication mechanism for CRM Online.Umbraco CMS: Umbraco CMS 5.2: Development on Umbraco v5 discontinued After much discussion and consultation with leaders from the Umbraco community it was decided that work on the v5 branch would be discontinued with efforts being refocused on the stable and feature rich v4 branch. For full details as to why this decision was made please watch the CodeGarden 12 Keynote. What about all that hard work?!?? We are not binning everything and it does not mean that all work done on 5 is lost! we are taking all of the best and m...CodeGenerate: CodeGenerate Alpha: The Project can auto generate C# code. Include BLL Layer、Domain Layer、IDAL Layer、DAL Layer. Support SqlServer And Oracle This is a alpha program,but which can run and generate code. Generate database table info into MS WordXDA ROM HUB: XDA ROM HUB v0.9: Kernel listing added -- Thanks to iONEx Added scripts installer button. Added "Nandroid On The Go" -- Perform a Nandroid backup without a PC! Added official Android app!ExtAspNet: ExtAspNet v3.1.8.2: +2012-06-24 v3.1.8 +????Grid???????（???????ExpandUnusedSpace????????）（??）。 -????MinColumnWidth（??????）。 -????AutoExpandColumn，???????????????（ColumnID）（?????ForceFitFirstTime??ForceFitAllTime，??????）。 -????AutoExpandColumnMax?AutoExpandColumnMin。 -????ForceFitFirstTime，????????????，??????????（????????????）。 -????ForceFitAllTime，????????????，??????????（??????????????????）。 -????VerticalScrollWidth，????????（??????????，0?????????????）。 -????grid/grid_forcefit.aspx。 -???????????En...AJAX Control Toolkit: June 2012 Release: AJAX Control Toolkit Release Notes - June 2012 Release Version 60623June 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found here: 11121. - Pages using ...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.5: Version: 2.5.0.5 (Milestone 5): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add IsInDesignMode property to the WafConfiguration class. WAF: Introduce the IModuleController interface. WAF: Add ...Windows 8 Metro RSS Reader: Metro RSS Reader.v7: Updated for Windows 8 Release Preview Changed background and foreground colors Used VariableSizeGrid layout to wrap blog posts with images Sort items with Images first, text-only last Enabled Caching to improve navigation between framesConfuser: Confuser 1.9: Change log: * Stable output (i.e. given the same seed & input assemblies, you'll get the same output assemblies) + Generate debug symbols, now it is possible to debug the output under a debugger! (Of course without enabling anti debug) + Generating obfuscation database, most of the obfuscation data in stored in it. + Two tools utilizing the obfuscation database (Database viewer & Stack trace decoder) * Change the protection scheme -----Please read Bug Report before you report a bug-----...XDesigner.Development: First release: First releaseNew ProjectsArcGIS Server Rest Catalog: jquery widget that display all MapServer service of ESRI ArcGIS Server in accordion control. Require jQuery and JsRender. BugsBox.Lib: BugsBoxlibCodeStudy: The project includes all my code written for .NET studyCommunity Tfs Team Tools: Community TFS Team Tools is a community project based on the example code from ALM Rangers - Quick Response Sample Command line utility to manage TFS TeamsDiveBaseManager: DiveBaseManagerEclipse App: Aplicacion para android para el envio de coordenaads a un servidorJQMdotNET: JQMdotNet is an early attempt to make a series of MVC HTML helpers to quickly render JQuery Mobile pages.MathBuilderFramework: Math Builder FX is a framework for math problems. The idea of this framework is to create real exercises of mathematics throught base classes.MDS MODELING WORKBOOK: MDS Modeling Workbook is a modeling tool and a solution accelerator for Microsoft Master Data Services. Minesweeper: a clean old minesweeperMultithreaded Port Scanner Utility: Mulithreaded Port Scanner Utility is a very simple port scanner that take advantage of the new System.Threading.Task namespace in .Net 4.0Nonocast.Data: Nonocast.Data is a free, open source developer focused object persistence for small and medium software.On{X} Scripts: This project is to share scripts I create or modify from available free/opensource scripts (off-course with due mentions & links to original developer).PCS MAP: ladPowerShell Module for Mayhem: A module for Mayhem with a reaction which executes a PowerShell script.PunkBuster™ Screenshot Viewer: PunkBuster™ Screenshot Viewer shows screenshots of all games protected with PunkBuster™.Random reminder: Objective: To create a simple Windows application that can schedule and automatically reschedule a random timer that falls within a defined interval.Remembrall: Some useful stuff (at least for me) ! Javascript plugins jQuery plugins C# utilities ASP.NET MVC helper extensionsrepotfs: Repositório de exemplosSharepoint Designer: Sharepoint ExplororSPFluid: Simple modularity and data access framework.SPManager: Helper classSQL Server : xp_fixeddrives2: C++ Extended Stored Procedure Get volumes InfoSWORD Extensions for Sharepoint: Push documents in and out of Sharepoint using the SWORD protocol. ***incomplete***Test projects: My testing projecttestdd06282012git01: xzc testdd06282012git1: sadtestdd06282012tfs01: xzctestddhg06282012: xctestddtfs062820121: ,lm;.testhg06282012dd1: zxTlrk: NATotal_Mayhem: Add-on for Mayhem ( http://mayhem.codeplex.com/ ) that includes networking events, power reactions, and more.WallSwitch: An application to cycle your desktop wallpaper.??????: ????????

  Read the article

• SQL SERVER – Validating Spatial Object as NULL using IsNULL

  - by pinaldave

  Follow up questions are the most fun part of writing a blog post. Earlier I wrote about SQL SERVER – Validating Spatial Object with IsValidDetailed Function and today I received a follow up question on the same subject. The question was mainly about how NULL is handled by spatial functions. Well, NULL is NULL. It is very easy to work with NULL. There are two different ways to validate if the passed in the value is NULL or not. 1) Using IsNULL Function IsNULL function validates if the object is null or not, if object is not null it will return you value 0 and if object is NULL it will return you the value NULL. DECLARE @p GEOMETRY = 'Polygon((2 2, 3 3, 4 4, 5 5, 6 6, 2 2))' SELECT @p.ISNULL ObjIsNull GO DECLARE @p GEOMETRY = NULL SELECT @p.ISNULL ObjIsNull GO 2) Using IsValidDetailed Function IsValidateDetails function validates if the object is valid or not. If the object is valid it will return 24400: Valid but if the object is not valid it will give message with the error number. In case object is NULL it will return the value as NULL. DECLARE @p GEOMETRY = 'Polygon((2 2, 3 3, 4 4, 5 5, 6 6, 2 2))' SELECT @p.IsValidDetailed() IsValid GO DECLARE @p GEOMETRY = NULL SELECT @p.IsValidDetailed() IsValid GO When to use what? Now you can see that there are two different ways to validate the NULL values. I personally have no preference about using one over another. However, there is one clear difference between them. In case of the IsValidDetailed Function the return value is nvarchar(max) and it is not always possible to compare the value with nvarchar(max). Whereas the ISNULL function returns the bit value of 0 when the object is null and it is easy to determine if the object is null or not in the case of ISNULL function. Additionally, ISNULL function does not check if the object is valid or not and will return the value 0 if the object is not NULL. Now you know even though either of the function can be used in place of each other both have very specific use case. Use the one which fits your business case. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Spatial Database, SQL Spatial

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >