Daily Archives

Articles indexed Friday July 6 2012

Page 1/16 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Book Review: “Inside Microsoft SQL Server 2008: T-SQL Querying” by Itzik Ben-Gan et al

    - by Sam Abraham
    In the past few weeks, I have been reading “Inside Microsoft SQL Server 2008: T-SQL Querying” by Itzik Ben-Gan et al. In the next few lines, I will be providing a quick book review having finished reading this valuable resource on SQL Server 2008. In this book, the authors have targeted most of the common as well as advanced T-SQL Querying scenarios that one would use for development on a SQL Server database. Book content covered sufficient theory and practice to empower its readers to systematically write better performance-tuned queries. Chapter one introduced a quick refresher of the basics of query processing. Chapters 2 and 3 followed with a thorough coverage of applicable relational algebra concepts which set a good stage for chapter 4 to dive deep into query tuning. Chapter 4 has been my favorite chapter of the book as it provided nice illustrations of the internals of indexes, waits, statistics and query plans. I particularly appreciated the thorough explanation of execution plans which helped clarify some areas I may have not paid particular attention to in the past. The book continues to focus on SQL operators tackling a few in each chapter and covering their internal workings and the best practices to follow when used. Figures and illustrations have been particularly helpful in grasping advanced concepts covered therein. In conclusion, Inside Microsoft SQL Server 2008: T-SQL Querying provided me with 750+ pages of focused, advanced and practical knowledge that has added a few tips and tricks to my arsenal of query tuning strategies. Many thanks to the O’Reilly User Group Program and its support of our West Palm Beach Developers’ Group. --Sam Abraham

    Read the article

  • ULogd2.x - Documents - IPFIX data generation

    - by Gomathivinayagam
    I would like to generate IPFIX data from the packets that are coming to my local system as part of experimentation. It seems ULogd is a good tool to do that. I am able to capture PCAP data. But there are very less documents available on ULogd2.x about IPFIX format data generation.(There are very few examples provided in ulogd.conf). Can you provide me any links that describes about how to generate IPFIX data using ulogd2.x? 1) What are the options available? I saw there is polling interval configuration. But I have no idea how does it work? 2) If I set hash_enable = 0, and uncomment the polling_interval value, I'm getting an exception as NFCT plugin requires hash table, evne though I have specified hash_buckets and hash_max_entries. Could you help on this? 3) In general, I would like to know how NFCT plugin works in ulogd2.x. I sent mail to ulogd mailing list, but there are no replies. Could you shed some light?

    Read the article

  • Multiple vlan issue with procurve switch

    - by Chris-AZ
    I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

    Read the article

  • Static file serving only works if root is a subfolder under public

    - by lulalala
    I am trying to serve static cache files using nginx. There are index.html files under the rails_root/public/cache directory. I tried the following configuration first, which doesn't work: root <%= current_path %>/public; # $uri always contains one slash(the first slash but not the last) try_files /cache$uri/index.html /cache$uri.html @rails; This give error: [error] 4056#0: *13503414 directory index of "(...)current/public/" is forbidden, request: "GET / HTTP/1.1" I then tried root <%= current_path %>/public/cache; # $uri always contains one slash(the first slash but not the last) try_files $uri/index.html $uri.html @rails; And to my surprise this works. Why is it that I can do the latter not the former( since they point to the same location) The permissions of the folders are: 775 public 755 cache 644 index.html The thing is that my favicon sitting under public/ is served correctly: # asset server server { listen 80; server_name assets.<%= server_name %>; expires max; add_header Cache-Control public; charset utf-8; root <%= current_path %>/public; }

    Read the article

  • Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there?

    - by jasonspiro
    A client of my IT-consulting service owns a web-development shop. He's been having problems with a Slackware 12.0 server running MySQL 5.0.67. The machine was set up by the client's sysadmin, who left on bad terms. My client no longer employs a sysadmin. As far as I can tell, the only copy of MySQL that's installed is the one described in /var/log/packages/mysql-5.0.67-i486-1: PACKAGE NAME: mysql-5.0.67-i486-1 COMPRESSED PACKAGE SIZE: 16828 K UNCOMPRESSED PACKAGE SIZE: 33840 K PACKAGE LOCATION: /var/slapt-get/archives/./slackware/ap/mysql-5.0.67-i486-1.tgz PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: mysql: mysql: mysql: FILE LIST: ./ var/ var/lib/ var/lib/mysql/ var/run/ var/run/mysql/ install/ install/doinst.sh install/slack-desc usr/ usr/include/ usr/include/mysql/ usr/include/mysql/my_alloc.h usr/include/mysql/sql_common.h usr/include/mysql/my_dbug.h usr/include/mysql/errmsg.h usr/include/mysql/my_pthread.h usr/include/mysql/my_list.h usr/include/mysql/mysql.h usr/include/mysql/sslopt-vars.h usr/include/mysql/my_config.h usr/include/mysql/mysql_com.h usr/include/mysql/m_string.h usr/include/mysql/sslopt-case.h usr/include/mysql/my_xml.h usr/include/mysql/sql_state.h usr/include/mysql/my_global.h usr/include/mysql/my_sys.h usr/include/mysql/mysqld_ername.h usr/include/mysql/mysqld_error.h usr/include/mysql/sslopt-longopts.h usr/include/mysql/keycache.h usr/include/mysql/my_net.h usr/include/mysql/mysql_version.h usr/include/mysql/my_no_pthread.h usr/include/mysql/decimal.h usr/include/mysql/readline.h usr/include/mysql/my_attribute.h usr/include/mysql/typelib.h usr/include/mysql/my_dir.h usr/include/mysql/raid.h usr/include/mysql/m_ctype.h usr/include/mysql/mysql_embed.h usr/include/mysql/mysql_time.h usr/include/mysql/my_getopt.h usr/lib/ usr/lib/mysql/ usr/lib/mysql/libmysqlclient_r.so.15.0.0 usr/lib/mysql/libmysqlclient_r.la usr/lib/mysql/libmyisammrg.a usr/lib/mysql/libmystrings.a usr/lib/mysql/libmyisam.a usr/lib/mysql/libmysqlclient.so.15.0.0 usr/lib/mysql/libmysqlclient_r.a usr/lib/mysql/libmysqlclient.a usr/lib/mysql/libheap.a usr/lib/mysql/libvio.a usr/lib/mysql/libmysqlclient.la usr/lib/mysql/libmysys.a usr/lib/mysql/libdbug.a usr/bin/ usr/bin/comp_err usr/bin/my_print_defaults usr/bin/resolve_stack_dump usr/bin/msql2mysql usr/bin/mysqltestmanager-pwgen usr/bin/myisampack usr/bin/replace usr/bin/mysqld_multi usr/bin/mysqlaccess usr/bin/mysql_install_db usr/bin/innochecksum usr/bin/myisam_ftdump usr/bin/mysqlcheck usr/bin/mysqltest usr/bin/mysql_upgrade_shell usr/bin/mysql_secure_installation usr/bin/mysql_fix_extensions usr/bin/mysqld_safe usr/bin/mysql_explain_log usr/bin/mysqlimport usr/bin/myisamlog usr/bin/mysql_tzinfo_to_sql usr/bin/mysql_upgrade usr/bin/mysqltestmanager usr/bin/mysql_fix_privilege_tables usr/bin/mysql_find_rows usr/bin/mysql_convert_table_format usr/bin/mysqltestmanagerc usr/bin/mysqlhotcopy usr/bin/mysqldump usr/bin/mysqlshow usr/bin/mysqlbug usr/bin/mysql_config usr/bin/mysqldumpslow usr/bin/mysql_waitpid usr/bin/mysqlbinlog usr/bin/mysql_client_test usr/bin/perror usr/bin/mysql usr/bin/myisamchk usr/bin/mysql_setpermission usr/bin/mysqladmin usr/bin/mysql_zap usr/bin/mysql_tableinfo usr/bin/resolveip usr/share/ usr/share/mysql/ usr/share/mysql/errmsg.txt usr/share/mysql/swedish/ usr/share/mysql/swedish/errmsg.sys usr/share/mysql/mysql_system_tables_data.sql usr/share/mysql/mysql.server usr/share/mysql/hungarian/ usr/share/mysql/hungarian/errmsg.sys usr/share/mysql/norwegian/ usr/share/mysql/norwegian/errmsg.sys usr/share/mysql/slovak/ usr/share/mysql/slovak/errmsg.sys usr/share/mysql/spanish/ usr/share/mysql/spanish/errmsg.sys usr/share/mysql/polish/ usr/share/mysql/polish/errmsg.sys usr/share/mysql/ukrainian/ usr/share/mysql/ukrainian/errmsg.sys usr/share/mysql/danish/ usr/share/mysql/danish/errmsg.sys usr/share/mysql/romanian/ usr/share/mysql/romanian/errmsg.sys usr/share/mysql/english/ usr/share/mysql/english/errmsg.sys usr/share/mysql/charsets/ usr/share/mysql/charsets/latin2.xml usr/share/mysql/charsets/greek.xml usr/share/mysql/charsets/koi8r.xml usr/share/mysql/charsets/latin1.xml usr/share/mysql/charsets/cp866.xml usr/share/mysql/charsets/geostd8.xml usr/share/mysql/charsets/cp1250.xml usr/share/mysql/charsets/koi8u.xml usr/share/mysql/charsets/cp852.xml usr/share/mysql/charsets/hebrew.xml usr/share/mysql/charsets/latin7.xml usr/share/mysql/charsets/README usr/share/mysql/charsets/ascii.xml usr/share/mysql/charsets/cp1251.xml usr/share/mysql/charsets/macce.xml usr/share/mysql/charsets/latin5.xml usr/share/mysql/charsets/Index.xml usr/share/mysql/charsets/macroman.xml usr/share/mysql/charsets/cp1256.xml usr/share/mysql/charsets/keybcs2.xml usr/share/mysql/charsets/swe7.xml usr/share/mysql/charsets/armscii8.xml usr/share/mysql/charsets/dec8.xml usr/share/mysql/charsets/cp1257.xml usr/share/mysql/charsets/hp8.xml usr/share/mysql/charsets/cp850.xml usr/share/mysql/korean/ usr/share/mysql/korean/errmsg.sys usr/share/mysql/german/ usr/share/mysql/german/errmsg.sys usr/share/mysql/mi_test_all.res usr/share/mysql/greek/ usr/share/mysql/greek/errmsg.sys usr/share/mysql/french/ usr/share/mysql/french/errmsg.sys usr/share/mysql/mysql_fix_privilege_tables.sql usr/share/mysql/dutch/ usr/share/mysql/dutch/errmsg.sys usr/share/mysql/serbian/ usr/share/mysql/serbian/errmsg.sys usr/share/mysql/mysql_system_tables.sql usr/share/mysql/my-huge.cnf usr/share/mysql/portuguese/ usr/share/mysql/portuguese/errmsg.sys usr/share/mysql/japanese/ usr/share/mysql/japanese/errmsg.sys usr/share/mysql/mysql_test_data_timezone.sql usr/share/mysql/russian/ usr/share/mysql/russian/errmsg.sys usr/share/mysql/czech/ usr/share/mysql/czech/errmsg.sys usr/share/mysql/fill_help_tables.sql usr/share/mysql/estonian/ usr/share/mysql/estonian/errmsg.sys usr/share/mysql/my-medium.cnf usr/share/mysql/norwegian-ny/ usr/share/mysql/norwegian-ny/errmsg.sys usr/share/mysql/my-small.cnf usr/share/mysql/mysql-log-rotate usr/share/mysql/italian/ usr/share/mysql/italian/errmsg.sys usr/share/mysql/my-large.cnf usr/share/mysql/ndb-config-2-node.ini usr/share/mysql/binary-configure usr/share/mysql/mi_test_all usr/share/mysql/mysqld_multi.server usr/share/mysql/my-innodb-heavy-4G.cnf usr/doc/ usr/doc/mysql-5.0.67/ usr/doc/mysql-5.0.67/README usr/doc/mysql-5.0.67/Docs/ usr/doc/mysql-5.0.67/Docs/INSTALL-BINARY usr/doc/mysql-5.0.67/COPYING usr/info/ usr/info/mysql.info.gz usr/libexec/ usr/libexec/mysqld usr/libexec/mysqlmanager usr/man/ usr/man/man8/ usr/man/man8/mysqlmanager.8.gz usr/man/man8/mysqld.8.gz usr/man/man1/ usr/man/man1/mysql_zap.1.gz usr/man/man1/mysql_setpermission.1.gz usr/man/man1/mysql_tzinfo_to_sql.1.gz usr/man/man1/msql2mysql.1.gz usr/man/man1/mysql_tableinfo.1.gz usr/man/man1/mysql_explain_log.1.gz usr/man/man1/mysqlcheck.1.gz usr/man/man1/comp_err.1.gz usr/man/man1/my_print_defaults.1.gz usr/man/man1/mysqlbinlog.1.gz usr/man/man1/myisam_ftdump.1.gz usr/man/man1/mysql_upgrade.1.gz usr/man/man1/mysql.1.gz usr/man/man1/mysql_client_test.1.gz usr/man/man1/resolve_stack_dump.1.gz usr/man/man1/mysql_fix_extensions.1.gz usr/man/man1/mysqlmanagerc.1.gz usr/man/man1/mysql_config.1.gz usr/man/man1/mysqlshow.1.gz usr/man/man1/myisamlog.1.gz usr/man/man1/replace.1.gz usr/man/man1/mysqlmanager-pwgen.1.gz usr/man/man1/mysqltest.1.gz usr/man/man1/innochecksum.1.gz usr/man/man1/mysqladmin.1.gz usr/man/man1/perror.1.gz usr/man/man1/mysql_waitpid.1.gz usr/man/man1/mysql_convert_table_format.1.gz usr/man/man1/mysqlman.1.gz usr/man/man1/mysqlimport.1.gz usr/man/man1/mysqlbug.1.gz usr/man/man1/mysql_find_rows.1.gz usr/man/man1/myisampack.1.gz usr/man/man1/myisamchk.1.gz usr/man/man1/mysql_fix_privilege_tables.1.gz usr/man/man1/mysql-stress-test.pl.1.gz usr/man/man1/resolveip.1.gz usr/man/man1/make_win_bin_dist.1.gz usr/man/man1/mysqlhotcopy.1.gz usr/man/man1/mysqld_multi.1.gz usr/man/man1/safe_mysqld.1.gz usr/man/man1/mysql_secure_installation.1.gz usr/man/man1/mysql_install_db.1.gz usr/man/man1/mysqldump.1.gz usr/man/man1/mysql-test-run.pl.1.gz usr/man/man1/mysqld_safe.1.gz usr/man/man1/mysqlaccess.1.gz usr/man/man1/mysql.server.1.gz usr/man/man1/make_win_src_distribution.1.gz etc/ etc/rc.d/ etc/rc.d/rc.mysqld.new etc/my-huge.cnf etc/my-medium.cnf etc/my-small.cnf etc/my-large.cnf /etc/rc.d/rc.mysqld is an ordinary Slackware-type start/stop script: #!/bin/sh # Start/stop/restart mysqld. # # Copyright 2003 Patrick J. Volkerding, Concord, CA # Copyright 2003 Slackware Linux, Inc., Concord, CA # # This program comes with NO WARRANTY, to the extent permitted by law. # You may redistribute copies of this program under the terms of the # GNU General Public License. # To start MySQL automatically at boot, be sure this script is executable: # chmod 755 /etc/rc.d/rc.mysqld # Before you can run MySQL, you must have a database. To install an initial # database, do this as root: # # su - mysql # mysql_install_db # # Note that step one is becoming the mysql user. It's important to do this # before making any changes to the database, or mysqld won't be able to write # to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). # To allow outside connections to the database comment out the next line. # If you don't need incoming network connections, then leave the line # uncommented to improve system security. #SKIP="--skip-networking" # Start mysqld: mysqld_start() { if [ -x /usr/bin/mysqld_safe ]; then # If there is an old PID file (no mysqld running), clean it up: if [ -r /var/run/mysql/mysql.pid ]; then if ! ps axc | grep mysqld 1> /dev/null 2> /dev/null ; then echo "Cleaning up old /var/run/mysql/mysql.pid." rm -f /var/run/mysql/mysql.pid fi fi /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & fi } # Stop mysqld: mysqld_stop() { # If there is no PID file, ignore this request... if [ -r /var/run/mysql/mysql.pid ]; then killall mysqld # Wait at least one minute for it to exit, as we don't know how big the DB is... for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do if [ ! -r /var/run/mysql/mysql.pid ]; then break; fi sleep 1 done if [ "$second" = "60" ]; then echo "WARNING: Gave up waiting for mysqld to exit!" sleep 15 fi fi } # Restart mysqld: mysqld_restart() { mysqld_stop mysqld_start } case "$1" in 'start') mysqld_start ;; 'stop') mysqld_stop ;; 'restart') mysqld_restart ;; *) echo "usage $0 start|stop|restart" esac But there's also an unexpected init script on the machine, named /etc/init.d/mysql: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: # [mysqld] # basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) # and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable # below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. #basedir= #datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file=/var/run/mysql/mysql.pid server_pid_file=/var/run/mysql/mysql.pid use_mysqld_safe=1 user=mysql if test -z "$basedir" then basedir=/usr bindir=/usr/bin if test -z "$datadir" then datadir=/var/lib/mysql fi sbindir=/usr/sbin libexecdir=/usr/libexec else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! [email protected]" } log_failure_msg() { echo " ERROR! [email protected]" } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1 # start or stop shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --use-mysqld_safe) use_mysqld_safe=1;; --use-manager) use_mysqld_safe=0;; esac done } parse_manager_arguments() { for arg do case "$arg" in --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done } wait_for_pid () { verb="$1" manager_pid="$2" # process ID of the program operating on the pid-file i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in 'created') # wait for a PID-file to pop into existence. test -s $pid_file && i='' && break ;; 'removed') # wait for this PID-file to disappear test ! -s $pid_file && i='' && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid" exit 1 ;; esac # if manager isn't running, then pid-file will never be updated if test -n "$manager_pid"; then if kill -0 "$manager_pid" 2>/dev/null; then : # the manager still runs else # The manager may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there's nothing that will affect the file. log_failure_msg "Manager of pid-file quit without updating file." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=\(.*\)$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'. If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else case "$pid_file" in /* ) ;; * ) pid_file="$datadir/$pid_file" ;; esac fi if test -z "$server_pid_file" then server_pid_file=$datadir/`/bin/hostname`.pid else case "$server_pid_file" in /* ) ;; * ) server_pid_file="$datadir/$server_pid_file" ;; esac fi case "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir manager=$bindir/mysqlmanager if test -x $libexecdir/mysqlmanager then manager=$libexecdir/mysqlmanager elif test -x $sbindir/mysqlmanager then manager=$sbindir/mysqlmanager fi echo $echo_n "Starting MySQL" if test -x $manager -a "$use_mysqld_safe" = "0" then if test -n "$other_args" then log_failure_msg "MySQL manager does not support options '$other_args'" exit 1 fi # Give extra arguments to mysqld with the my.cnf file. This script may # be overwritten at next upgrade. $manager --user=$user --pid-file=$pid_file >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysqlmanager fi exit $return_value elif test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. pid_file=$server_pid_file $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysql fi exit $return_value else log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. # The RedHat / SuSE lock directory to remove lock_dir=/var/lock/subsys/mysqlmanager # If the manager pid_file doesn't exist, try the server's if test ! -s "$pid_file" then pid_file=$server_pid_file lock_dir=/var/lock/subsys/mysql fi if test -s "$pid_file" then mysqlmanager_pid=`cat $pid_file` echo $echo_n "Shutting down MySQL" kill $mysqlmanager_pid # mysqlmanager should remove the pid_file when it exits, so wait for it. wait_for_pid removed "$mysqlmanager_pid"; return_value=$? # delete lock for RedHat / SuSE if test -f $lock_dir then rm -f $lock_dir fi exit $return_value else log_failure_msg "MySQL manager or server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch $server_pid_file else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $sbindir/mysqld` if test -z $mysqld_pid ; then if test "$use_mysqld_safe" = "0" ; then lockfile=/var/lock/subsys/mysqlmanager else lockfile=/var/lock/subsys/mysql fi if test -f $lockfile ; then log_failure_msg "MySQL is not running, but lock exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0 An unimportant aside: The previous users of the machine kept a messy home directory. Their home directory was /root. I've pasted a copy at http://www.pastebin.ca/2167496. My question: Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there? P.S. This question is far from perfect. Please feel free to edit it.

    Read the article

  • Gittornado with Nginx fails to push and pull

    - by Josh Buell
    I'm making a simple website to host git repositories, much like github. I'm using Gittornado to handle git Smart HTTP requests, and it works perfectly locally; I can clone, push, pull, etc... But when I put it behind Nginx, git commands stop working, giving no errors except: "fatal: The remote end hung up unexpectedly" I know that it's Nginx that's causing the trouble because if I open the port that tornado is running on and try my git commands through that (i.e. "git pull \http://mysite.com:8000/myrepository master" instead of "git pull \http://mysite.com/myrepository master" [backslashes added because Server Fault says I have too many links]) everything works as expected. The Nginx access and error logs don't seem to say anything interesting, so I'm reasonably sure that it has something to do with the way Nginx is compressing or chunking the requests/responses, causing git to think there's been an unexpected hangup, but I'm not sure what to do to fix it, since this is my first time with Nginx. My Nginx configuration file is basically a clone of the on found here; I've tried commenting out various likely-seeming options to see if they were causing the problem, but none of them fixed it so I assume there's some default behavior I need to suppress, I'm just not sure which. Any thoughts on how to fix this? Since it works not through Nginx, I'm considering just redirecting git requests to the tornado port itself, but this feels like a hack rather than a clean solution...

    Read the article

  • Does likewise-open > version 5.4 contain CIFS support?

    - by Ben Andken
    I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

    Read the article

  • Deploying site on Amazon Beantalk and IIS settings

    - by Idan Shechter
    I am interested in working with Amazon Elastic Beantalk to deploy my new site. A few things that I need to know and can't get an answer to: 1) How can I maintain IIS settings of all deployed and future deployed machines? 2) If I can maintain, what happens if I change the settings on one server, will it automatically set it on other servers? 3) How can I backup the data. In other servers I usually make an AMI and deploy to a new server in case of a problem?

    Read the article

  • How to set up a software VPN when moving a server to the cloud

    - by Neal L
    I work in a small company with one office in Dallas and another in Los Angeles. We run a Fedora server at our Dallas location and use a Linksys RV042 at each location to create a VPN connection between the sites. Every time the power or internet goes out in Dallas, our server is inaccessible so the entire company goes down. Because of this, we would like to use a shared server in the cloud (something like Linode) to avoid this problem. As a relative novice to VPN configurations, I would like to know if it is possible to set up a software VPN on the cloud server and connect our local networks in Dallas and LA to that VPN. I've read about openvpn and ssh vpns, but I don't know it is the best option. Could anyone with some experience point me in the right direction on the right combination of software VPN and hardware for this? We're open to new hardware to make this happen. Thanks!

    Read the article

  • Ubuntu - why would /var/log/dmesg stop updating after boot? does not show panic/cpu_hung errors which the console shows

    - by Tom G
    So I have an Ubuntu 10.04 install VM on a host. Latest 2.6.38-15-server kernel . /var/log/dmesg displays only the bootup but will stop recording after that. It will not show the trace/cpu_hung errors I am trying to troubleshoot. /var/log/dmesg.0 , dmesg.1 nothing - I did a string search for the text that displays on the console during the crash and NOTHING gets logged anywhere in /var/log/* . I have to call into the provider and ask them to take a screenshot of the console since nothing shows in dmesg. Why would /var/log/dmesg not record kernel panics, or such?

    Read the article

  • DNS Help (CNAMEs and A Records)

    - by Aaron Francis
    I'm trying to set up my DNS properly so that I can have hosting through PHPFog and email services using MailGun. PHPFog has us redirect the naked domain to the www and then use a CNAME to point the www to PHPFog and mailgun provides the MX records to use. The problem I'm having is that I have no A record set up on Hover because when I do, the CNAME no longer works (?), or at least it seems that way because I am no longer seeing my site from PHPFog, I'm seeing a Hover landing page. I know all the records I need, I just can't seem to get them to play nicely together. I've been told Amazon's Route 53 should be able to solve my problem, but I haven't yet figured out how. I just need to have hosting at PHPFog and email services through MailGun. As you can probably tell, I have only a very limited understanding of DNS, so forgive me if this is a silly question.

    Read the article

  • Linux Port 80 to redirect to a Windows box

    - by Richard Staehler
    I have 2 servers here at work. One is a Windows 2008 Server R2 (for safety's sake, lets use 192.168.1.100) and the other is a Fedora 14 (192.168.1.101). Currently when you hit our subdomain, x.test.com, our routers tell it to go to our Fedora box, and since Apache is installed and listening to port 80, it displays the Fedora Apache Test Page. It's obvious that I don't use port 80 for this machine, however I do use NAGIOS on it and its always nice to be able to access that from anywhere in the world. So when I want to access it, I just type x.test.com/nagios. Now here comes the dilemma.... On the Windows R2 box, we recently have installed a program that requires us to setup a web server using IIS7. Because of this application, I'm going to be creating a new subdomain called y.test.com, but since we only have 1 WAN/router, it will still get pointed to our Fedora box. That being said, it wants to use port 80 as well (or whatever port I damn well wish to assign it). So my question is: since our router is pointing to the Fedora 14 box (.101), and I want to make sure I can access NAGIOS from anywhere in the world, how do I tell Apache (httpd) to redirect port 80 to the other server (.100)? If not possible, what are my other options? I have rinetd installed on Fedora and have even tried the option 192.168.1.101 80 192.168.1.100 80 and it didn't seem to work "because port 80 was already bound" Thoughts? and Thanks!

    Read the article

  • Why is Postfix trying to connect to other machines SMTP port 25?

    - by TryTryAgain
    Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3085]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.135]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Is this a DNS thing, doubtful as I've changed from our local DNS to Google's..still Postfix will occasionally try and connect to ab.xyz.com from a variety of addresses that may or may not have port 25 open and act as mail servers to begin with. Why is Postfix attempting to connect to other machines as seen in the log? Mail is being sent properly, other than that, it appears all is good. Occasionally I'll also see: relay postfix/error[3090]: 3F1AB42132: to=, relay=none, delay=32754, delays=32724/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.102]:25: Connection refused) I have Postfix setup with very little restrictions: mynetworks = 127.0.0.0/8, 10.0.0.0/8 only. Like I said it appears all mail is getting passed through, but I hate seeing errors and it is confusing me as to why it would be attempting to connect to other machines as seen in the log. Some Output of cat /var/log/mail.log|grep 3F1AB42132 Jul 5 02:04:01 relay postfix/smtpd[1653]: 3F1AB42132: client=unknown[10.41.0.109] Jul 5 02:04:01 relay postfix/cleanup[1655]: 3F1AB42132: message-id= Jul 5 02:04:01 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:04:31 relay postfix/smtp[1634]: 3F1AB42132: to=, relay=none, delay=30, delays=0.02/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.110]:25: Connection refused) Jul 5 02:13:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:14:28 relay postfix/smtp[1681]: 3F1AB42132: to=, relay=none, delay=628, delays=598/0.01/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.247]:25: Connection refused) Jul 5 02:28:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:29:28 relay postfix/smtp[1684]: 3F1AB42132: to=, relay=none, delay=1527, delays=1497/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.135]:25: Connection refused) Jul 5 02:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:59:28 relay postfix/smtp[1739]: 3F1AB42132: to=, relay=none, delay=3327, delays=3297/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.40.40.130]:25: Connection timed out) Jul 5 03:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 03:59:28 relay postfix/smtp[1839]: 3F1AB42132: to=, relay=none, delay=6928, delays=6897/0.03/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 04:11:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 04:11:33 relay postfix/error[2093]: 3F1AB42132: to=, relay=none, delay=7653, delays=7622/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 05:21:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 05:21:33 relay postfix/error[2217]: 3F1AB42132: to=, relay=none, delay=11853, delays=11822/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 06:29:25 relay postfix/qmgr[2420]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 06:29:55 relay postfix/error[2428]: 3F1AB42132: to=, relay=none, delay=15954, delays=15924/30/0/0.08, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 07:39:24 relay postfix/qmgr[2885]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 07:39:54 relay postfix/error[2936]: 3F1AB42132: to=, relay=none, delay=20153, delays=20123/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out)

    Read the article

  • Apache VirtualHost running very slow on OS X 10.7 (Lion)

    - by jwerre
    I've set up a few virtual hosts in Lion and it's running very slowly. NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost DocumentRoot "/Library/WebServer/Documents" </VirtualHost> <VirtualHost *:80> ServerName dev.local DocumentRoot "/Users/me/mysite" <Directory /Users/me/mysite> Order allow,deny Allow from all </Directory> </VirtualHost> then in /etc/hosts I added 127.0.0.1 dev.local Everything works fine but it's sooooo slow — 5 or so second to reload a simple "Hello World" html page. Here's is the strange part. If I make a symbolic link of the site in my ~/Sites folder (ln -s ~/mysite ~/Sites/mysite) and navigate to http://localhost/~me/mysite It's nice and fast the way it should be.

    Read the article

  • Linux: Force fsck of a read-only mounted filesystem?

    - by Timothy Miller
    I'm developing for a headless embedded appliance, running CentOS 6.2. The user can connect a keyboard, but not a monitor, and a serial console would require opening the case, something we don't want the user to have to do. This all pretty much obviates the possibility of using a recovery USB drive to boot from, unless all it does is blindly reimage the harddrive. I would like to provide some recovery facilities, and I have written a tool that comes up on /dev/tty1 in place of getty to provide these functions. One such function is fsck. I have found out how to remount the root and other file systems read-only. Now that they are read-only, it should be safe to fsck them and then reboot. Unfortunately, fsck complains to me that the filesystems are mounted and refuses to do anything. How can I force fsck to run on a read-only mounted partition? Based on my research, this is going to have to be something obscure. "-f" just means to force repair of a clean (but unmounted) partition. I need to repair a clean or unclean mounted partition. From what I read, this is something "only experts" should do, but no one has bothered to explain how the experts do it. I'm hoping someone can reveal this to me. BTW, I've noticed that e2fsck 1.42.4 on Gentoo will let you fsck a mounted partition, even mounted read-write, but it seems only to do so if fsck is run from a terminal, so it can ask the user if they're sure they want to do something so dangerous. I'm not sure if the CentOS version does the same thing, but it appears that fsck CAN repair a mounted partition, but it flatly refuses to when not run from a terminal. One last-resort option is for me to compile my own hacked fsck. But I'm afraid I'll mess it up in some unexpected way. Thanks! Note: Originally posted here.

    Read the article

  • What are the steps to set up a Hyper-V solution with one NIC

    - by Cameron Aziz
    I have successfully installed centos on a virtual machine via Hyper-V on Windows Server 2008 R2. This server has one NIC. I have created a virtual NIC, and virtual subnet, and within the virtual machine (via console) I can ping the gateway. But not google. Is there certain steps I am missing, I feel like I'm one setting away. Im not sure what other information would be useful. Here is the ipconfig of the host: Ethernet adapter vNIC losangeles1_1: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 10.10.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix .. : IPv4 Address. . . . . . . . . . . : 72.51.43.43 Subnet Mask . . . . . . . . . . . : 255.255.255.192 Default Gateway . . . . . . . . . : 72.51.43.1

    Read the article

  • Software for monitoring internal software?

    - by Tyler Eaves
    Is there any good software for monitoring the health of a collection of related software? Requirements are as follows: Web-based, deployable on standard Linux/BSD software. Configurable to support a variety of processes, scheduled at various intervals. Some sort of dashboard interface, for monitoring status, viewing errors, etc. As an example, suppose we have a daily export that's scheduled to run at 6AM each morning. After the export completes, it would POST a status message, saying it had completed, passing in some sort of application key to identify the export. If that status message hadn't come in, by, say, 6:30AM, an e-mail might be sent, that application should go red on the dashboard, etc. Applications should also be able to post error/warning messages. Basically the goal is to be able to monitor all of our internal projects from one system, rather than a multitude of e-mails, log files, etc. I suspect that I'll probably have to end up writing this from scratch, but I just thought I'd ask.

    Read the article

  • git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

    - by Ben
    I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh [email protected]$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: [email protected]:~/thejibe/testing/web$ git rm ./testing rm 'testing' [email protected]:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing [email protected]:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master [email protected]:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

    Read the article

  • Failed depencies: libmysqlclient.so.16 is needed

    - by user54625
    I'm trying to install something on my server that requires mysqlclient, but looking at my RPM package list I have it ("MySQL-client-5.0.91-0.glibc23"). Doing a locate on libmysqlclient gives me this: [[email protected]] ~ >> locate libmysqlclient /usr/lib64/libmysqlclient.so /usr/lib64/libmysqlclient.so.15 /usr/lib64/libmysqlclient.so.15.0.0 /usr/lib64/libmysqlclient_r.so /usr/lib64/libmysqlclient_r.so.15 /usr/lib64/libmysqlclient_r.so.15.0.0 /usr/lib64/mysql/libmysqlclient.a /usr/lib64/mysql/libmysqlclient.la /usr/lib64/mysql/libmysqlclient.so /usr/lib64/mysql/libmysqlclient_r.a /usr/lib64/mysql/libmysqlclient_r.la /usr/lib64/mysql/libmysqlclient_r.so /usr/local/cpanel/lib64/libmysqlclient.so.14 For some reason it looks like I'm missing libmysqlclient.so.16. Does anyone know why this could be? How do I go about getting it? I'm currently running CentOS 5. Thanks a lot.

    Read the article

  • Which OS/distributions have 64-bit kernel and 32-bit userspace? [closed]

    - by osgx
    Which OS (or distributions) comes with 64-bit kernels (x86_64, SPARC64, PPC64, ..smth else?..) and 32-bit userland? I want all small userspace programs (like ls, cat, etc) to be 32-bit, because they really no needs to be 64-bit. But OS kernel must be 64bit for using =3 Gb of RAM. Also database programs (when using a lot of memory) can be 64bit. 64bit mode can hurt some programs, makes them bigger, eating (wasting) memory on pointers (especially in big abstract datatypes like list, tree, etc). 64 bit programss WASTES twice memory on EACH Pointer. I don't want it. And the Question is not "Are the 32-bit programs needed when 64-bit porcessor is available". Question is "What OS comes with 32 bit userspace and kernels in 32/64 bit mode". Examples of such OS includes: Solaris/SPARC64, MACOSX/X86_64 (10.5)/....

    Read the article

  • How to restore missing space in NTFS file systems

    - by jacobsee
    I have a 40 GB USB hard drive formatted with NTFS on a PC running Windows XP Pro, SP3. I am trying to free as much space as possible. Windows Explorer tells me that I have about 200 MB of files on the drive (showing hidden and system files). When I show drive properties however it shows 73% free, around 10 GB used. I ran CHKDSK and it found all kinds of problems. Now running defrag and it is behaving as if there were 10 GB of files, but I can't access them anywhere. How to find and remove this extra 10GB?

    Read the article

  • Unable to connect java webservie to android

    - by nag prakash
    This is my android activity. Please help me out. I will send the project completely if you can drop your mail id. package prakash.ws.connectsql; import org.ksoap2.SoapEnvelope; import org.ksoap2.serialization.SoapObject; import org.ksoap2.serialization.SoapPrimitive; import org.ksoap2.serialization.SoapSerializationEnvelope; import org.ksoap2.transport.AndroidHttpTransport; import android.os.Bundle; import android.app.Activity; import android.widget.EditText; import android.widget.TextView; public class MainActivity extends Activity { private static final String Soap_Action="http://testws.ws.prakash/testws"; private static final String Method_Name="testws"; private static final String Name_Space="http://testws.ws.prakash/"; private static final String URI="http://localhost:8045/testws/services/Testws?wsdl"; EditText ET; TextView Tv; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); // Packeting the request SoapObject request=new SoapObject(Name_Space,Method_Name); // pass the parameters to the method.If it has one request.addProperty("name", ET.getText().toString()); //passing the entire request to the envelope SoapSerializationEnvelope soapEnvelope=new SoapSerializationEnvelope(SoapEnvelope.VER11); soapEnvelope.setOutputSoapObject(request); //transporting envelope AndroidHttpTransport aht=new AndroidHttpTransport(URI); try{ aht.call(Soap_Action, soapEnvelope); @SuppressWarnings("deprecation") SoapPrimitive resultString=(SoapPrimitive) soapEnvelope.getResult(); Tv.setText(resultString.toString()); }catch(Exception e) { Tv.setText("error"); } } } This XML file does not appear to have any style information associated with it. The document tree is shown below. <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:ns1="http://org.apache.axis2/xsd" xmlns:ns="http://testws.ws.prakash" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" targetNamespace="http://testws.ws.prakash"> <wsdl:documentation>Please Type your service description here</wsdl:documentation> <wsdl:types> <xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://testws.ws.prakash"> <xs:element name="testws"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="name" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="testwsResponse"> <xs:complexType> <xs:sequence> <xs:element minOccurs="0" name="return" nillable="true" type="xs:string"/> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> </wsdl:types> <wsdl:message name="testwsRequest"> <wsdl:part name="parameters" element="ns:testws"/> </wsdl:message> <wsdl:message name="testwsResponse"> <wsdl:part name="parameters" element="ns:testwsResponse"/> </wsdl:message> <wsdl:portType name="TestwsPortType"> <wsdl:operation name="testws"> <wsdl:input message="ns:testwsRequest" wsaw:Action="urn:testws"/> <wsdl:output message="ns:testwsResponse" wsaw:Action="urn:testwsResponse"/> </wsdl:operation> </wsdl:portType> <wsdl:binding name="TestwsSoap11Binding" type="ns:TestwsPortType"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="testws"> <soap:operation soapAction="urn:testws" style="document"/> <wsdl:input> <soap:body use="literal"/> </wsdl:input> <wsdl:output> <soap:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="TestwsSoap12Binding" type="ns:TestwsPortType"> <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <wsdl:operation name="testws"> <soap12:operation soapAction="urn:testws" style="document"/> <wsdl:input> <soap12:body use="literal"/> </wsdl:input> <wsdl:output> <soap12:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:binding name="TestwsHttpBinding" type="ns:TestwsPortType"> <http:binding verb="POST"/> <wsdl:operation name="testws"> <http:operation location="testws"/> <wsdl:input> <mime:content type="text/xml" part="parameters"/> </wsdl:input> <wsdl:output> <mime:content type="text/xml" part="parameters"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="Testws"> <wsdl:port name="TestwsHttpSoap11Endpoint" binding="ns:TestwsSoap11Binding"> <soap:address location="http://localhost:8045/testws/services/Testws.TestwsHttpSoap11Endpoint/"/> </wsdl:port> <wsdl:port name="TestwsHttpSoap12Endpoint" binding="ns:TestwsSoap12Binding"> <soap12:address location="http://localhost:8045/testws/services/Testws.TestwsHttpSoap12Endpoint/"/> </wsdl:port> <wsdl:port name="TestwsHttpEndpoint" binding="ns:TestwsHttpBinding"> <http:address location="http://localhost:8045/testws/services/Testws.TestwsHttpEndpoint/"/> </wsdl:port> </wsdl:service> </wsdl:definitions> this web service is running fine in the server. Manifest File I have added the internet Permission. Now this is the error in the logcat. 07-04 21:31:00.757: E/dalvikvm(375): Could not find class 'org.ksoap2.serialization.SoapObject', referenced from method prakash.ws.connectsql.MainActivity.onCreate 07-04 21:31:00.757: W/dalvikvm(375): VFY: unable to resolve new-instance 481 (Lorg/ksoap2/serialization/SoapObject;) in Lprakash/ws/connectsql/MainActivity; 07-04 21:31:00.757: D/dalvikvm(375): VFY: replacing opcode 0x22 at 0x0008 07-04 21:31:00.757: D/dalvikvm(375): VFY: dead code 0x000a-004e in Lprakash/ws/connectsql/MainActivity;.onCreate (Landroid/os/Bundle;)V 07-04 21:31:00.937: D/AndroidRuntime(375): Shutting down VM 07-04 21:31:00.937: W/dalvikvm(375): threadid=1: thread exiting with uncaught exception (group=0x40015560) 07-04 21:31:00.957: E/AndroidRuntime(375): FATAL EXCEPTION: main 07-04 21:31:00.957: E/AndroidRuntime(375): java.lang.NoClassDefFoundError: org.ksoap2.serialization.SoapObject 07-04 21:31:00.957: E/AndroidRuntime(375): at prakash.ws.connectsql.MainActivity.onCreate(MainActivity.java:30) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1611) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1663) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.access$1500(ActivityThread.java:117) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:931) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.os.Handler.dispatchMessage(Handler.java:99) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.os.Looper.loop(Looper.java:123) 07-04 21:31:00.957: E/AndroidRuntime(375): at android.app.ActivityThread.main(ActivityThread.java:3683) 07-04 21:31:00.957: E/AndroidRuntime(375): at java.lang.reflect.Method.invokeNative(Native Method) 07-04 21:31:00.957: E/AndroidRuntime(375): at java.lang.reflect.Method.invoke(Method.java:507) 07-04 21:31:00.957: E/AndroidRuntime(375): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 07-04 21:31:00.957: E/AndroidRuntime(375): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 07-04 21:31:00.957: E/AndroidRuntime(375): at dalvik.system.NativeStart.main(Native Method) 07-04 21:31:05.307: I/Process(375): Sending signal. PID: 375 SIG: 9

    Read the article

  • Search multiple search engines with a single keyword at the same time in Chrome?

    - by cptloop
    I want to search multiple websites at once by using a keyword trigger in Google Chrome. I am trying to achieve this with Javascript as described in this topic over at mozillazine. This is the code that supposedly works in Firefox: javascript:void(window.open('http://www.google.com/search?q=%s'));void(window.open('http://www.altavista.com/web/results?q=%s')) I have tried to insert this code into the "URL with %s in place of query" but nothing happens when I invoke it. Is it possible to get this to work this way or another in Chrome?

    Read the article

  • Wi-Fi performance in Windows 8 RP on a MacBook Air (mid 2011)

    - by Steven Lu
    I was able to install the Boot Camp Windows software using the executable that it provided, and there are no unrecognized or unknown devices in Device Manager. Wi-Fi works but it seems to be limited to an extremely slow 1.5Mbits. Network Center reports an 802.11n connection (at 65Mbps usually) but transfers never reach above about 200kB/s. Being limited to 1/20th of the connection speed of my internet service is quite frustrating. Does anybody experience the same issue? I have been trying to identify the Broadcom Wi-Fi chipset and a driver that I could try to upgrade to but I have made very little progress on Google on this front.

    Read the article

  • Alternative to Windows Home Server (WHS) backups

    - by Adam Tegen
    Since Microsoft announced the end of life for WHS, are there any alternatives? Specifically, I am interested in recovering from a catastrophic disk failure with WHS. For example, this is my ideal scenario when a desktop hard-drive fails (has a bad virus, etc): Install a disk of the same size or greater Boot the desktop with the Recovery Disc Point the recovery application at the WHS Pick the machine, the drive(s) and the date of the backup Have a couple beers Reboot to a working machine as if nothing happened. I would need to slap multiple disks in the machine without raid. It sounds like LVM will work here. It would be nice, but not required to have de-duplication of files when multiple machines are backed up. (Single Instance Storage)

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >