Daily Archives

Articles indexed Tuesday August 28 2012

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Create a new Plesk CLI user

    - by mattdwen
    I am trying to create a user which has rights to the Panels (v11) CLI tools. I've added the user to the psaadm group, as the documentation indicates, as well as the swkey-data group, as I was getting access denied for that dir. I am using sudo to run the command as that user: sudo -u mcp /usr/local/psa/bin/subscription --info test.com But I am receiving this error: Unable to connect to database: get_admin_password() failed: file_get_contents() failed: Suggestions?

    Read the article

  • Can / should I prevent my domain controller doing forward lookups for remote users?

    - by markmnl
    I have a Windows Server 2003 server in the office. I VPN into the LAN remotely. My VPN has a virtual NIC with the Windows Server as the primary DNS since it is a domain controller. When connected to the VPN and I do a nslookup or simply browse the web my VPN's DNS (the office's Windows Server) provides the DNS answers - I beleive becuase it has DNS forwarders so queries it cant answer it forwards and then relays the answer. This is the desired behaviour for workstations in the office (they should query their domain controller first). However for remote VPN users this is not desirable - I do not want my remote office's server to answer DNS queries it is not the authority of (which happends to be 192.168.x.x). Is there any way I can configure this?

    Read the article

  • Proxy arp and 1:1 NAT

    - by daniel4er
    I have a Linux router with 2 NICs doing masquerade from network 192.168.0.0/24 to an ADSL router. users <----> NIC A [router] NIC B <----> INTERNET Now I'm experimenting with proxy arp on the NIC A to intercept all the IP requests in the network. I have a pool of addresses in the 192.168.0.0/24 network for this users. How can I translate, saythe IP10.0.0.64to192.168.0.64` in order to grant it internet access? I have already tried SNAT - DNAT, even I have written a NFQUEUE app to spoof the IP address with no luck.

    Read the article

  • Turn old rack server into a telephone server

    - by Jake Elsley
    I have an old server lying around and I am thinking of using it as an internal telephone server. Its main use would be to set up a 1 to 1 telephone system that could be used internally to connect to different users in different offices. I have looked at software like Asterisk, but it seems that this is mainly for external telephone systems. Is this possible to do with Asterisk (or other software) or is this not possible without involving a VOIP company?

    Read the article

  • Send email from server to Google Apps email address (same domains)

    - by Orlando
    I'm sending email from a server, let's say domain.com. I also have Google Apps email set up for hosted email, same domain, domain.com. If I get mail sent to me from anywhere else, I receive things just fine. However, if the email originates from my server, it just ends up in /var/mail/root as a delivery error saying the user is unknown. I created a user on the server for the name which is having trouble, [email protected] Retried sending and it sends, but not to my hosted email at Google Apps. I just receive it at /var/mail/webmaster now. I'm using sendmail. I messed around with /etc/aliases but adding webmaster: [email protected] looked useless (and I was right.) Any help?

    Read the article

  • Writing an SVN hook that updates copy of committed code

    - by Jordan Reiter
    I have a SVN repository with a lot of sub-projects stored in it. Right now in my post-commit I just loop through all possible folders on the machine and run svn update on each: REPOS="$1" REV="$2" DIRS=("/path/to/local/copy/firstproject" "/path/to/local/copy/anotherproject" ... "/path/to/local/copy/spam") LOGNAME=`/usr/bin/whoami` for DIR in ${DIRS[@]} do cd $DIR sudo /usr/bin/svn update --accept=postpone 2>&1 | logger logger "$LOGNAME Updated $DIR to revision $REV (from $REPOS) " done The problem is that this is slow and redundant when I'm just committing the subfolder of one of the projects. I'm wondering if there's a better way of identifying which of the DIRS I should use and only update that one. Is there some way to do this? As far as I can tell there's no way to determine which part of a repo was committed and thus which directory needs to be updated. Is the only alternative to create a separate repository for each project? (Probably should have done that from the start, if so...)

    Read the article

  • Suggest me a good php-fpm configuartion

    - by Werulz
    I am configuring a server for a friend.The server has the following specs 8GB RAM Quad Core processor 1 TB HDD 100 mbps port However all php files are loadking very slowly.I did a speedtest and server takes 16 secs to Load FIRST byte.I strongly believe its my php-fpm configuration.Server uses nginx and php only , no mysql etc... My current php-fpm configuration pm.max_children = 50 pm.start_servers = 10 pm.min_spare_servers = 5 pm.max_spare_servers = 35 Server load and ram usage are perfectly fine Please suggest me a good configuration for this server UPDATE: This configuration works fine pm.max_children = 20 pm.start_servers = 7 pm.min_spare_servers = 5 pm.max_spare_servers = 10 pm.max_requests = 100 The problem with first byte load time is solved.However after like 15-20 hours First byte load time increase gradually. I have to reload php-fpm to get small load time Based on my conf above what i modify to it so that first byte load time remain small and i don't have to restart it:P

    Read the article

  • A record for www

    - by Manjoor
    My present DNS configuration for my website's A record is as below Name Value --------------------------- example.com 67.45.xx.xx www.example.com 67.45.xx.xx In above configuration user can open website either by example.com or by www.example.com. One of my SEO team-member argues for single point access. According to him search engine’s crawler see 2 different name with same content. It is not good and we should configure domain in such a way that if user open example.com then browser automatically get redirected to www.example.com. Now I have 2 questions Does above argument is valid? If yes then what changes I need to do in my DNS?

    Read the article

  • Dual Xeon Server voltages are low

    - by Mindflux
    I've got a whitebox server running CentOS 5.7. It's a Dual Xeon 5620, 24GB of RAM. The mainboard is a SuperMicro X8DT6-F and the chassis is a SC825TQ-R720LPB. Dual 720W Power supplies. We had a big power outage a couple weeks back that took down everything, I don't have any pre-power outage figures for this server, and the only reason I noticed these is because when I was bringing up the servers I was checking them out with more scrutiny than usual. http://i.imgur.com/rSjiw.png (Image of voltage readings) As you can see, CPU1 DIMM is low, +3.3V is high, 3.3VSB is high, +5v is high, +12v is REAL LOW (out of normal 5% (plus/minus))... and VBAT is off the charts. With my whitebox VAR we've tried the following: Swap out PSU with another server I have with the same PSUs. Try different power cord Update BMC/IPMI firmware in case readings were wrong (They aren't) Update BIOS Try different PDU Try a different outlet and/or circuit Replaced Voltage Regulator Unit At this point, the only thing we haven't done, seemingly is replace the mainboard.. which is what the next step will be unless something else shines some light on the situation. I should mention the system is rock solid otherwise which is a surprise given the 12v voltage is that far off.

    Read the article

  • "Unable to open MRTG log file" error with nagios and mrtg

    - by Simone Magnaschi
    We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

    Read the article

  • Repair OS From Within VMWare

    - by Zurahn
    I've got a Debian installation in an installation of ESXi that won't boot due to the deletion of a few system files that need to be restored. It would be preferable to at least access the files on the instance, if a repair is impossible. To complicate matters, there isn't enough room on the drive to upload a full distribution to boot from with VMWare disk utility. Any ideas on how to accomplish this?

    Read the article

  • Port forwarding (portmap) works only locally

    - by Tag Wint
    There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

    Read the article

  • Oracle with Kerberos authentication and Windows 2003 Server as KDC

    - by Supaplex
    I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

    Read the article

  • SpinRite and USB blues - does a solution exist?

    - by Peter Mortensen
    I use SpinRite to recover hard disks and their content, and to a lesser degree for preventive maintenance. However, if a USB drive (USB thumb drive and/or external hard disk with a USB interface) is connected when SpinRite scans for devices, then SpinRite never finishes/hangs. The work-around is of course to disconnect the drive, but there is value in being able to use SpinRite on USB drives. Some external drives have no screws and it is difficult to take out the hard disk without damaging the casing. And for those that have it would save the disassembling time. Is there a way to fix this problem (e.g. BIOS changes or a modified SpinRite boot CD) without resorting to floppy disks?

    Read the article

  • Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

    - by Mike Szp.
    I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

    Read the article

  • How can I only have a single move command in a batch file?

    - by PeanutsMonkey
    I have an existing batch file that attempts to move files from 2 directories to 2 different locations. At the moment these are called as 2 separate move commands. I am wanting to simply the code further and was wondering if there was a way to do so @echo off for %%a in (C:\Test\*.*) do if "%%~xa" == "" move /Y "C:\Test\%%~na%%~xa" "D:\Done" for %%i in (C:\Sample\*.*) do if "%%~xi" == "" move /Y "C:\Sample\%%~ni%%~xi" "D:\Done"

    Read the article

  • how to find which package certain command belongs to on centos?

    - by hugemeow
    for example i can easily find locate command belongs to mlocate.i386 package. yum search locate mlocate.i386 : An utility for finding files by name [[email protected] /]$ rpm -qa | grep locate mlocate-0.15-1.el5.1 yum search updatedb Loaded plugins: fastestmirror, protectbase 0 packages excluded due to repository protections =========================================== Matched: updatedb =========================================== mlocate.i386 : An utility for finding files by name but it's not so easy to find which package free command belongs to: yum search free // this command just returns too much informationy rpm -qa | grep free freetype-2.2.1-31.el5_8.1 // obviously not the package by which free command is installed so is there any convinent way to know which package a specific command belongs to on linux? for example centos or some other distributions:)

    Read the article

  • how to use updatedb command as an ordinary user on linux?

    - by hugemeow
    locate command is very useful tool on linux, but it seems only root can run updatedb command, so it will be very unconvinent to use locate command on linux, so how to make ordinary user to have the priviledge to run updatedb command? updatedb is the command use to update the db used by locate command:) error message when try to run updatedb using ordinary user: [[email protected] code]$ updatedb updatedb: can not open a temporary file for `/var/lib/mlocate/mlocate.db'

    Read the article

  • VirtualBox 4.1.20 (Windows 7 / Ubuntu 12.04 (32 bit)) copy/paste is broken

    - by user1628257
    I have a Windows 7 Pro host, and Ubuntu 12.04 LTS guest. I cannot get the shared clipboard working. I have installed Guest Additions 4.1.20 on VirtualBox 4.1.20, have restarted, followed instructions found at http://www.virtualbox.org/manual/ch04.html#idp18411760, and have enabled bidirectional clipboard sharing within VirtualBox options. However, I still cannot copy and paste between the host and guest. Copy/paste works great within the host, and within the guest, but not between the two. I'm out of ideas.

    Read the article

  • Wireless network not working Linux Mint

    - by zharvey
    I have a home LAN that I am confident is working properly (I have a Windows 7 and an Ubuntu Desktop machine that both see the router and a working Internet connection). I just installed Linux Mint (Maya) on a new machine and although I can connect to the Internet via a wired (ethernet) connection, it does not see my wireless network. In fact, as you can see in the screenshot below, it doesn't even look like it has the drivers to be able to detect a wireless network... I have ran update manager and made sure that I am up-to-date with everything and have restarted. Any ideas here?!?

    Read the article

  • Is it common to have portable hard drive not recognize?

    - by lamwaiman1988
    I have a bad hard drive which could not be recognized by windows. If windows can recognize it, it could just be pure luck. There are better chance of it being recognize by plugging it at the usb back of the machine, rather than the front one. More interestingly, I have a usb cable which fork itself at one side ( i.e it has 2 heads at one side ). I can plug both heads to the machine and connect the portable hard drive on the other end of the usb cable? Can I get more voltage by doing this? I am guessing the front usb port doesn't have enough power. I am wondering if I buy a new portable usb hard drive, would it have easy read by plugging at the front usb port? I am not sure if I screw up the jumper connecting the front usb ports, but it is okay for other device such as usb stick and mouse.

    Read the article

  • Ubuntu mount hard drive confusing

    - by Fresheyeball
    I'm new to linux and have a home server set up running ubuntu. In the ui its very easy to mount my additional internal harddrives. I just double click on them. Since I have made this server headless, I now need to mount via the command line. How can I replicate the very simple double click gui behavior? So far all the information I've found is very complex. Ubuntu auto generated folders for each hd in under /media and I can see the harddrives under /dev but have no idea which is which as the hardware is identical between them. I also don't know how they are formated. Thanks in advance for any advice you have.

    Read the article

  • Internet Explorer 10 (Metro App) on Windows 8 Pro (RTM) crash

    - by ferpaz
    Internet Explorer 10 (Metro App) on Windows 8 Pro (RTM) does not start and crash with this error: Log Name: Application Source: Application Error Date: 27/08/2012 19:21:29 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: DELL-OPE3.red.aseinfo.com.sv Description: Faulting application name: iexplore.exe, version: 10.0.9200.16384, time stamp: 0x50107ebe Faulting module name: iertutil.dll, version: 10.0.9200.16384, time stamp: 0x50109c90 Exception code: 0xc0000005 Fault offset: 0x0000000000172f0b Faulting process id: 0xadc Faulting application start time: 0x01cd84bb737cfa16 Faulting application path: C:\Program Files\Internet Explorer\iexplore.exe Faulting module path: C:\WINDOWS\system32\iertutil.dll Report Id: b1597df3-f0ae-11e1-be78-88532e15da73 Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-08-28T01:21:29.000000000Z" /> <EventRecordID>7612</EventRecordID> <Channel>Application</Channel> <Computer>DELL-OPE3.red.aseinfo.com.sv</Computer> <Security /> </System> <EventData> <Data>iexplore.exe</Data> <Data>10.0.9200.16384</Data> <Data>50107ebe</Data> <Data>iertutil.dll</Data> <Data>10.0.9200.16384</Data> <Data>50109c90</Data> <Data>c0000005</Data> <Data>0000000000172f0b</Data> <Data>adc</Data> <Data>01cd84bb737cfa16</Data> <Data>C:\Program Files\Internet Explorer\iexplore.exe</Data> <Data>C:\WINDOWS\system32\iertutil.dll</Data> <Data>b1597df3-f0ae-11e1-be78-88532e15da73</Data> <Data> </Data> <Data> </Data> </EventData> </Event> Any suggestions?

    Read the article

  • How to completely disable laptop sound?

    - by Alvaro Rodriguez
    I have a HP Pavillion DV7 laptop with win 8 pro. The laptop has an unidentified problem with sound drivers or hardware that sometimes causes volume to constantly jiggle up and down. This is very annoying because of these consequences: Renders mute unusable - as the volume changes the sound unmutes automatically Causes an annoying win 8 "surface UI" notification to appear constantly in the upper left corner, which is distracting enough by itself, but more importantly Renders the whole "surface UI" unusable, because it loses focus whenever the sound changing notification appears When the jiggling happens, the laptop also loses the ability to redirect sound to earphones - sound comes out of the speakers even if earphones are connected. To solve these issues I want to completely disable sound in the laptop (I've tried reinstalling drivers several times to no end). I have tried disabling all sound related drivers and devices in the Device Manager but Windows re-enables those automatically whenever I restart the laptop. The BIOS doesn't have any settings to disable sound hardware either. Please don't suggest having the laptop sound serviced or fixed. It's not worth the expense. I just want to remove sound support so I can use it normally. It is very unusable as it is now.

    Read the article

  • Internal disk not correctly recognised by Windows 7

    - by david
    i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >