Daily Archives

Articles indexed Thursday October 11 2012

Page 1/15 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• How to specify VNC port number with Mac OS X built-in VNC client?

  - by Eonil

  Is it possible to specify VNC port number in built-in VNC client of Mac OS X? I'm trying to connect to Xen VPS machine with Finder's built-in VNC client. I used address like this. vnc://server:port But it fails because it uses another port, and Finder's built-in VNC cannot handle port number. As I know it handles the number after colon as display-number, not a port number. Is there a way to specify port number on the VNC client? Or any workaround for this? (port forwarding??? I have no idea about it...)

  Read the article

• CodePlex Daily Summary for Wednesday, October 10, 2012

  CodePlex Daily Summary for Wednesday, October 10, 2012Popular ReleasesA C# 4.0 Push Notification Helper Library for WP7.0 & WP7.1: Easy Notification 1.0.0: New Feature - Send Tile, Toast & Raw Notifications to Windows Phone Devices. New Feature - Supports Windows Phone 7.0 & Windows Phone 7.1. New Feature - Validation rules are in-built for Push Notification Messages. New Feature - Strongly typed interfaces. New Feature - Supports synchronous & asynchronous methods to send notifications. New Feature - Supports authenticated notifications using X509 Certificates. New Feature - Supports Callback Registration Requests. New Feature - S...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Online Image Editor: Online Image Editor v1.1: If you have problems with this tool, please email me at amisouvikdas@gmail.com or You can also participate this project to improve this.Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...DevLib: 69721 binary dll: 69721 binary dllVidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...DotNetNuke Boards: 01.00.00: This beta release represents the end of training session 1, based on jQuery and Knockout integration in DotNetNuke 6.2.3. It is designed to allow a single user or multiple users to add/edit/delete cards but no cards can be assigned to anyone at this point. This release is not intended for production use!Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projectsadcc2: adccAP.Framework: This a asp.net mvc3 of test web site .EFCodeFirst: Projeto criado para experimentos e estudos com o Entity FrameworkEXPS-RAT: HelloFiskalizacija za developere: Projekt je namijenjen razvojnim inženjerima, programerima, developerima i svima ostalima koji se bave razvojem programskih rješenja za fiskalne blagajne.Galleriffic App for SharePoint 2013: Galleriffic App is an app part for SharePoint 2013 to display a picture gallery with cool JQuery animations and effects. Hack.net: Hack.net is a Roguelike clone similar to NetHack or Roguelike.Inno Setup For .NET Application: This is a simple inno setup for .net developerJava Special Functions Library: Java Special Functions Library implemented as a public class part of my larger mathematical package.LocalFileOpener: The LocalFileOpener plugin opens an intent to help you easily open local files on the device under installed applications.localizr - .NET Collaborative Translation & Localization: Localizr is a platform for collaborative localization and translation of .NET projects.Metro UI CSS: Metro UI CSS a set of styles to create a site with an interface similar to Windows 8 Metro UI. MoskieDotNet: A sandbox for me learn some new technologies.Mouse Automation: Allows a user to automate repetitive clicking within EverQuestMS SQL DB Schema Updater: Simple tool for updating MS SQL database schema based on "ideal" database model.n8design Tools: Tools any Source Code by Stefan Bauer.NasosCS: ???? ?? ??????Pokemonochan: ALright this is a Pokemon MMo bound to come out someday!PotatoSoft: ?????????????!Power Mirrors: Leverage the usefulness of SQL Server mirrors using PowerShell and SMO. Create mirrors from scratch, assign witnesses and test failovers, all from PowerShell! Project13251010: sdfdReal Time Data Bus: A collection of real time data bus implementations.Ricky Tailor's ASP.NET Web 2.0 Project: 7COM0203 Web Scripting And Content Creation Task 1. SampleTFS2: Sample Projectslotcarduino - An Arduino based slotcar timing project: Slotcar timing project based on Arduino Uno/Mega 2560. Standalone system with serial enabled graphic display.System.Data.Entity.Repository: Entity framework code first framework wrapper with support for generic repository pattern, N-Tier application and Transaction Management for rapid developmentTest Marron: This project is a test to explore codeplexTmib Video Downloader: A small youtube video downloader. Created in C#Web Scripting & Content Creation: Fhame Rashid MSc Software Engineering Module Log: Web-Scripting and Content Creationwebbase: webbaseWebScriptingandContentCreation: This project is for the MSc module Web Scripting and Content Creation.Zuordnung: Zuordnung

  Read the article

• JCP EC Nominations and Meet the Candidates Call

  - by heathervc

  The Nominations period for the 2012 JCP EC Elections closes tomorrow, 11 October at midnight pacific time.  Eligible JCP Members (all current JSPA 2 signers) may nominate themselves.  You will need your Elections credentials to complete the nomination, which were sent to the primary contacts of all eligible JCP Members via email last week. This year all ratified (there are 4 proposed ratified candidates) and elected (there are 7 candidates so far) will appear on one ballot; the top 2 candidates will win elected seats. This year, the selected EC Members will serve a single year term.  Following the 2012 Elections, there will be one merged EC (approved through JSR 355), and a new JCP version, JCP 2.9 will be in effect.  In 2013, all EC members will stand for election to complete the merge process described in the JCP 2.9 process document. All of the candidates' nominations materials are now available. The ratified candidates are:  Cinterion, Credit Suisse, Fujitsu and HP.The elected candidates are:  Cisco Systems, CloudBees, Giuseppe Dell'Abate, London Java Community, MoroccoJUG, Software AG, and Zero Turnaround. Next week, 18 October, we will hold an open teleconference for the Java Community to meet the candidates and ask questions regarding their nomination.  We hope you will be able to participate in the call.  Should the time be inconvenient, a recording will be made available for download, and candidate questions may be posted on this blog entry or sent to [email protected]. Topic: Meet the EC Candidates Date: Thursday, October 18, 2012 Time: 9:30 am, Pacific Daylight Time (San Francisco, GMT-07:00) Meeting Number: 807 818 225 Meeting Password: MeetEC ------------------------------------------------------- To join the online meeting (Now from mobile devices) ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&RT=MiM0 2. If requested, enter your name and email address. 3. If a password is required, enter the meeting password: MeetEC 4. Click "Join". To view in other time zones or languages, please click the link: https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&ORT=MiM0 ------------------------------------------------------- To join the audio conference only -------------------------------------------------------     +1 (866) 682-4770     Outside the US: global access numbers  https://www.intercallonline.com/portlets/scheduling/viewNumbers/listNumbersByCode.do?confCode=6279803 or +1 (408) 774-4073     Conference code: 9454597     Security code: JCPEC (52732)------------------------------------------------------- For assistance ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/mc 2. On the left navigation bar, click "Support".

  Read the article

• Data Quality Services Performance Best Practices Guide

  This guide details high-level performance numbers expected and a set of best practices on getting optimal performance when using Data Quality Services (DQS) in SQL Server 2012 with Cumulative Update 1. Schedule Azure backupsRed Gate’s Cloud Services makes it simple to create and schedule backups of your SQL Azure databases to Azure blob storage or Amazon S3. Try it for free today.

  Read the article

• Java default Integer value is int

  - by Chris Okyen

  My code looks like this import java.util.Scanner; public class StudentGrades { public static void main(String[] argv) { Scanner keyboard = new Scanner(System.in); byte q1 = keyboard.nextByte() * 10; } } It gives me an error "Type mismatch: cannot convert from int to byte." Why the heck would Java store a literal operand that is small enough to fit in a byte,. into a int type? Do literals get stored in variables/registers before the ALU performs arithmatic operations.

  Read the article

• Gui Batch program on USB

  - by Chris Okyen

  When I put my USB drive into a computer, I want autorun.inf to run a batch file that will have a win32/winform GUI windows interface to allow the user to select a program to run from the beginning similiar to like this: Please let me know if windows allows this without it being done programmatically. I know their are some automation programs that work by generating code based on what it records you do. But I don't knwo of any already built windows prompt like this, so I don't knwo how to record such an action.

  Read the article

• Mirror virtualized development environment

  - by David Casillas

  I work alone in some iOS projects in a local environment. I have been thinking in a way to be able to share my development environment between my Mac Mini and my MacBook. I mostly work at home in the Mini but sometimes I need to do a demo or work outside and I would like to have the development environment mirrored in both. I have think in using a virtual machine (via VirtualBox) with just my development tools instaled. Then I could synchronize that VM with some software between both computers so I will always have the exact environment no matter what computer I use. Is there any good reason not do do this way? I have not used Virtualization to much so I have no background on the subject. My basic setup will be: Mac Mini: i7 dual Core, 8Gb. OSX Mountain Lion Host OS: MacBook: 2.4 Core 2 Duo. 4Gb. OSX Lion Host OS. Virtual Box with Mountain Lion guest OS in both machines. XCode5, Simulator.

  Read the article

• dsl modem problem in ubuntu 11.10

  - by Misterious

  Earlier I used Windows 7 and the modem used to work absolutely fine. Even when it disconnected it used to reconnect automatically without any trouble. But then I installed Ubuntu 11.10 on dual boot and set up the modem connection properly but the modem now disconnects much more frequently(eariler it disconnected once in 5 hours or so and after ubuntu in 5 minutes!!). Also once disconnected it does not reconnect even when i have checked the connect automatically button. I have to restart the system to reconnect it. Also then I clean installed windows and modem works perfectly fine again. What is the reason for this and how can I solve this? I really want to use ubuntu but due to this problem I cant. Sorry for my poor English.

  Read the article

• about permssion

  - by Gitesh

  I am really new to ubuntu (12.04) to automount my drive I added this line to fstab /dev/sda4 /media/FF15-ED92 vfat defaults 0 0 But now when I want to delete a directory or a file it doesn't delete like using del key of keyboard so right clicked on that directories and files but there was no option to delete and move to trash was also not clickable. So how can I give myself permissions to do this. Also I can't do this on my pen drive also. I tried this but nothing happened sudo chmod 777 /media/44gb if I change from chmod to chown then it gives that changing ownership of `/media/44gb': Operation not permitted

  Read the article

• Suspend after delay via SSH

  - by thornate

  I know how to suspend after a delay by using: echo 'pmi action suspend' | at now + 1 minutes However, that only seems to work as long as I keep the console window open. Am I correct in assuming that the at commands are cleared when I close the console? This is an issue as I want to be able to log in to my computer via SSH, send the suspend command, then log out before it happens. Suspending immediately tends to freeze my local console window, which is inconvenient. Is there a way to send a delayed suspend command without it being cleared when I log out?

  Read the article

• cannot delete IPv6 default gateway

  - by NulledPointer

  The commands below should be pretty self-explanatory. Please note that the route for which i get failure is obtained by RA and has very less expiry ( e Flag in UDAe). @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592300sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1776sec @vm:~$ @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete default gw fe80::20c:29ff:fe87:f9e7 @vm:~$ ip -6 route 2001:4860:4001:800::1002 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1003 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:800::1005 via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 2001:4860:4001:803::100e via fe80::20c:29ff:fe87:f9e7 dev eth1 proto static metric 1024 fd00:ffff:ffff:fff1::/64 dev eth1 proto kernel metric 256 expires 2592279sec fe80::/64 dev eth1 proto kernel metric 256 default via fe80::20c:29ff:fe87:f9e7 dev eth1 proto kernel metric 1024 expires 1755sec @vm:~$ @vm:~$ @vm:~$ sudo route -6 delete ::/0 gw fe80::20c:29ff:fe87:f9e7 dev eth1 SIOCDELRT: No such process @vm:~$ @vm:~$ @vm:~$ route -n6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2001:4860:4001:800::1002/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1003/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:800::1005/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 2001:4860:4001:803::100e/128 fe80::20c:29ff:fe87:f9e7 UG 1024 0 0 eth1 fd00:ffff:ffff:fff1::/64 :: UAe 256 0 0 eth1 fe80::/64 :: U 256 0 0 eth1 ::/0 fe80::20c:29ff:fe87:f9e7 UGDAe 1024 0 0 eth1 ::/0 :: !n -1 1 349 lo ::1/128 :: Un 0 1 3 lo fd00:ffff:ffff:fff1:a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo fd00:ffff:ffff:fff1:fce8:ce07:b9ea:389f/128 :: Un 0 1 0 lo fe80::a00:27ff:fe7f:7245/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth1 ::/0 :: !n -1 1 349 lo @vm:~$ UPDATE: Another question is whats the use of link local address as the default route?

  Read the article

• What happens to my Swap space if I choose to replace Windows with Ubuntu?

  - by Ramandeep

  When I install Ubuntu 12.04, I'll be presented with three options: install Ubuntu alongside Windows, replace Windows with Ubuntu and something else. If I choose 'replace Windows', then I cannot make a swap space. So what then? I've 1GB RAM. Will only my C drive get replaced or what will happen? If only C drive is affected, then will data on the other 2 drives get saved? If yes, how can I access it (on which drive of Ubuntu) after installing Ubuntu?

  Read the article

• Which logs will tell me about the Touchpad and Keyboard locking up?

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• Will Ubuntu break my RAID 0 array?

  - by Chad

  I am upgrading an older machine today with new Motherboard, RAM, and CPU. Then I am going to do a fresh install of Ubuntu 64bit. Currently the old machine has an 80gb system drive, and a 4TB RAID 0 array. The old Motherboard has no SATA ports, so I used a SATA card. Ubuntu set up the old RAID array, will it still recognize the array on a newer machine? Are there any steps I should take to ensure the array isn't damaged? It's non-crucial data, but I would rather not start over if it can be avoided. Thanks.

  Read the article

• Kernel Panic: Not booting after upgrade from 10.04 to 12.04

  - by Jitesh

  I upgraded from 10.04 to 12.04LTS. Upgrade went fine, even restarted couple of times. Then the next day while booting into Ubuntu, after the grub, it gave the error Kernel panic : not syncing vfs unable to mount root fs on unknown block (0,0). I then booted into live CD and tried the following commands, based on other posts on this forum: sudo fdisk -l As the 8 was on /dev/sda1, sudo mount /dev/sda1 /mnt sudo mount --bind /dev /mnt/dev Now I got the message: mount: mount point /mnt/dev does not exist Then tried sudo mount --bind /proc /mnt/proc Again got the message: mount point point /mnt/proc does not exist. then tried sudo chroot /mnt Got message: chroot: failed to run comman '/bin/bash': No such file or directory Now have no clue what to do next. Unable to boot into Ubuntu. Please help. Jitesh

  Read the article

• Universal navigation menu across domains

  - by Jon Harley

  I'd like to start by saying that I've searched for hours and could not find a definitive answer to my question. Across different sites on different second-level domains exists a universal navigation bar with a collection of roughly 30 links. This universal bar is exactly the same for every page on each domain. The bar's HTML, CSS and JavaScript are all stored in a subfolder for each domain and the HTML is embedded upon serving the page and is not being injected on the client side. None of the links use any rel directives and are as vanilla as can be. My question is about Google's duplicate content rule. Would something like this be considered duplicate content? Matt Cutt's blog post about duplicate content mentions boilerplate repetition, but then he mentions lengthy legalese. Since the text in this universal bar is brief and uses common terms, I wonder if this same rule applies. If this is considered duplicate content, what would be a good way to correct the problem? Thank you for your help.

  Read the article

• Multi threaded game - updating, rendering, and how to split them

  - by CodeBunny

  From the StackOverflow post (it was recommended I move this): So, I'm working on a game engine, and I've made pretty good progress. However, my engine is single-threaded, and the advantages of splitting updating and rendering into separate threads sounds like a very good idea. How should I do this? Single threaded game engines are (conceptually) very easy to make, you have a loop where you update - render - sleep - repeat. However, I can't think of a good way to break updating and rendering apart, especially if I change their update rates (say I go through the update loop 25x a second, and have 60fps for rendering) - what if I begin updating halfway through a render loop, or vice versa?

  Read the article

• Why instantiation of static nested class object is allowed?

  - by Parag Meshram

  I have started learning Java language for Android Application developement. As per my understanding based on static class, we cannot instantiate object of static class. But why instantiation of static nested class object is allowed in following situaltion? class EnclosingClass { //... class static StaticInnerClass { //... } } Why we can create object of inner class if it is marked as static? EnclosingClass.StaticInnerClass s = new EnclosingClass.StaticInnerClass()

  Read the article

• Bean is not instantiating while using hibernate interceptor

  - by amit sharma

  I am using hibernate interceptor with spring framework,but when i pass a bean reference of DAO class its not instantiating the bean. My interceptor class has: private IMyService myService; // and getters and setters while application-context.xml having entries: <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="entityInterceptor" ref="logInterceptor"></property> </bean> <bean name="logInterceptor" class="com.amit.project.Utility.TableLogInterceptor" > <property name="myService" ref="myService"/> </bean> <bean name="myService" class="com.amit.project.service.impl.MyService"> But my bean is not instantiating in class, showing null. entityInterceptor is not allowing to do that or anything else? plz suggest a way if anybody knows.

  Read the article

• Ajax Get Request works fine when requested in browser, but gets 302 in iframe. What could be the reason for this?

  - by Vlad Nicula

  I am working on a web app that makes several ajax requests at startup. The applications works fine when run individually. When running it into a iframe, one of the ajax requests returns a 302 Found HTTP status. I'm sure I'm hitting the same url with both the browser and the iframe. The application that creates the frame is on a different domain and port. What could be causing this? Out of 5 get requests to the same server, only one (the third) gets a 302.

  Read the article

• "You have requested an outdated version of PayPal"

  - by porton

  When I being logged it in PayPal follow this link: https://www.sandbox.paypal.com/cgi-bin/webscr?cmd=_xclick;business=porton_1349611651_biz%40narod.ru;quantity=;item_name=Points;undefined_quantity=1;currency_code=ILS;no_shipping=1;no_note=1;return=http%3A%2F%2Fseostart.co.il%2Fcgi-bin%2Fuser%2Fhome.pl;cancel_return=http%3A%2F%2Fseostart.co.il%2Fcgi-bin%2Fuser%2Fhome.pl;notify_url=http%3A%2F%2Fseostart.co.il%2Fcgi-bin%2Fpaypal%2Fpaypal-notify.pl;custom=user%3D1&invoice=23 I receive message: You have requested an outdated version of PayPal. This error often results from the use of bookmarks. What is the error?

  Read the article

• IE9 syntax on jquery crossbrowser with jsonp and FF, Chrome

  - by Andrew Walker

  I have the following code and i have a problem in ensuring part of it is used when a IE browser is used, and remove it when any other browser is used: $.ajax({ url: 'http://mapit.mysociety.org/areas/'+ulo, type: 'GET', cache: false, crossDomain: true, dataType: 'jsonp', success: function(response) { This works fine in IE9 because I have put the dataType as jsonp. But this will not work on Chrome or FF. So I need to remove the dataType. I tried this: <!--[IF IE]> dataType: 'jsonp', <![endif]--> But it did not work. It's worth noting, it does not need the dataType set when in FF or Chrome as it's json. Whats the correct syntax to have this work ? Thanks Andrew

  Read the article

• Bad Practice requiring file within a model?

  - by Lee Marshall

  I have built an MVC php application and was wondering, if instead of having to write out a large amount of html and set the data, could I not just have all this html (with some php) in a separate file and just require it? For example: $test = '<div> Test content <div>More content</div> </div>'; $APP->Template->setData('test', $test, FALSE); Instead could I not just use: $test = require("includes/content.php"); $APP->Template->setData('test', $test, FALSE); Would this be considered as bad practise? It just seems that by requiring files, it can shorten the length of controllers. Would be good to get anybodies advice on this matter.

  Read the article

• Menu item ID is not recognized

  - by Alex Farber

  menu/activity_main.xml: <menu xmlns:android="http://schemas.android.com/apk/res/android"> <item android:id="@+id/menu_settings" android:title="@string/menu_settings" android:showAsAction="never" /> <item android:id="@+id/menu_save_log" android:title="@string/menu_save_log" android:showAsAction="never" /> </menu> MainActivity.java: //@Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_main, menu); return true; } @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { case R.id.menu_settings: // OK break; case R.id.menu_save_log: // menu_save_log cannot be resolved or is not a field break; } return true; } Why menu_save_log is not recognized?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >