Daily Archives

Articles indexed Monday October 15 2012

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• compile software with older version of gcc and linux kernel

  - by ant2009

  Distributor ID: SUSE LINUX Description: openSUSE 11.4 (x86_64) Release: 11.4 Codename: Celadon gcc (SUSE Linux) 4.5.1 Linux linux-14ay 2.6.37.6-0.20-desktop #1 SMP PREEMPT 2011-12-19 23:39:38 +0100 x86_64 x86_64 x86_64 GNU/Linux Hello, I am trying to install software on the above system. However, the software that I need requires an earlier version of gcc (version 4.1) my current install version is 4.5.1. It is possible to install an 4.1 on my current system? Where would I get the gcc version from? Also, I get this message about the Linux kernel The current kernel version (2.6.37.6-0.20-desktop) is later than the version currently supported by this software (2.6.5) Is it possible to install this earlier kernel. Where would I get that from? Many thanks for any suggestions,

  Read the article

• lighttpd: Backend is overloaded + fcgi-server re-enabled + all handlers are down

  - by AbuZubair

  We have a standard lighttpd deployment with PHP-CGI and our error logs are flooding with the following. This is causing a huge problem because we keep returning 500's to our clients: 2012-10-14 14:28:38: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 36 2012-10-14 14:28:38: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:39: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:40: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 37 2012-10-14 14:28:40: (mod_fastcgi.c.2764) fcgi-server re-enabled: 0 /tmp/php-7735.socket 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:41: (mod_fastcgi.c.3001) backend is overloaded; we'll disable it for 1 seconds and send the request to another backend instead: reconnects: 0 load: 57 2012-10-14 14:28:42: (mod_fastcgi.c.3597) all handlers for /index.php? on .php are down. Does anyone have any clue as to what is going on? We restarted all php and lighttpd related processes and that didn't fix the problem. We ended up rebooting the whole box and now its gone away, although we fear it may come back later.... In general our deployment has been doing fine for a long time and this is the first time this has happened.

  Read the article

• Forcing logon to Air Watch server upon joining wifi

  - by DKNUCKLES

  I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

  Read the article

• SQL Server agent died

  - by Manjot

  3 SQL server agents stopped and didn't restart automatically untill we manually restarted them. SQL servers are on SQL 2005 X86 standard edition. The error message that was reported in Application log was: Faulting application sqlagent90.exe, version 2005.90.4211.0, stamp 49837478, faulting module kernel32.dll, version 5.2.3790.4480, stamp 49c51f0a, debug? 0, fault address 0x0000bef7. No errors were reported in SQL server logs or SQl agent logs. Does anyone know what this means? I tried to Google but no luck. Thanks in advance!

  Read the article

• Splitting CA component off puppet master

  - by Dennis LeMioux

  We are scaling our puppet infrastructure and would like to split off the CA component from the puppet master server to another server. Part of the change involves a servername change for the puppetmaster too. I'm no puppet expert but i'm at a point where I -think- we need to create a SAN cert with both the old and new names in it (to be safe), and then re-sign all the agent nodes all over again which is going to be a royal PITA. Is there a quicker/smarter way to do this? We already have hundreds of agent nodes out there and individually re-signing them will be an arduous task.

  Read the article

• having trouble with bog standard openldap server db

  - by dingfelder

  I am having trouble getting an "out of the box" openldap server working. The examples on the openldap site stiull refer to the slapd.conf file, but the install does not make that. if I start the server (service slapd start) I do not get any errors, but cannot connect ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) anyone have a simple howto for v2.4 ? I am on fedora15, installed openldap-servers and clients via yum. I have phpldapadmin installed that I can try and connect with once I can get the command line working

  Read the article

• IIS FTP Server works locally, but cannot connect from remote

  - by Mike Christensen

  I'm trying to setup an FTP server on Windows 2008 Server. I can connect locally: C:\>ftp localhost Connected to WebHead1 220 Microsoft FTP Service However, when I try to connect from remote, it doesn't work: ~>ftp x.x.x.x ftp: Can't connect to `x.x.x.x': Operation timed out ftp: Can't connect to `x.x.x.x' I've tried everything I can think of with the settings. The FTP server is bound to all unassigned IPs and listening on port 21. I've also checked "FTP Server" in the firewall settings. Nothing appears in the FTP log files. I'm totally out of ideas!

  Read the article

• Tying down a cloud by virtualizing everything and then locking VMs to real hardware as necessary

  - by tudor

  I'm looking for a cloud software solution that: Can run on both server and desktop machines; Virtualizes hardware and has the option of exposing each real machine to the cloud; Allows a VM to be "locked" to a set of real hardware capabilities and stay there until moved (e.g. a user's "real" desktop); Allows a VM to link to some types of devices elsewhere (e.g. USB/serial via ethernet); and Is geography-aware to control movement of VMs between real networks. I'm aware that this may be the holy grail of virtualization, and I've searched alot. Some solutions appear to meet some criteria but not others. Most cloud implementations appear to ignore real hardware, for example. I realise that this may be solved by using three different implementations in combination: A standard cloud server farm. A bare-metal network backup utility with PXEBoot. VNC and/or VDI. (VNC obviously would require the real hardware to be running.) This combination, however, has some serious drawbacks that I'd like to solve by treating it as one system. My explanation follows... I have a network of real servers and desktops in multiple locations. I've virtualized servers before using Virtualbox and that's worked quite well. I've even connected USB devices to VMs on servers. I would like to virtualize the desktops in all my offices to facilitate movement of desktops, remote access (e.g. VDI) and bare-metal backups. However, I know that there are problems with this. For example, some desktops have specific hardware (e.g. 3D graphics cards, USB devices, etc) that limit their mobility. Geographic constraints also limit movement in that VMs can be moved easily within offices, but transferring between offices is not always preferable. What I would like to find is a system that can virtualize everything from bare-metal easily by maintaining an abstraction layer on each client and server machine that exposes the hardware available and runs as a cloud. Then certain VMs would be "locked" to specific hardware (so that, e.g. the VM runs only on their own desktop.) This would be required for situations where speed is important (e.g. 3D graphics pass-through). In addition, abstracted low-speed devices (e.g. USB) could be piped from real hardware to a VM in the cloud. This is important since if a VM is taken down, another VM can connect to the real hardware for minimum downtime.

  Read the article

• Apache 2 proxy for Tomcat 7

  - by hsnm

  Following the how-to, I wanted to make a proxy for traffic to the address /app to be processed by Tomcat 7. I added this to my httpd.conf: LoadModule proxy_module {path-to-modules}/mod_proxy.so LoadModule deflate_module modules/mod_deflate.so ProxyPass /app http://localhost:8081 ProxyPassReverse /app http://localhost:8081 I also have this on my server.xml: <Connector port="8081" enableLookups="false" acceptCount="100" connectionTimeout="20000" proxyName="localhost" proxyPort="80"/> And I have the folder /var/lib/tomcat7/webapps/app with my application files. I restarted both Tomcat 7 and Apache 2 after doing the configurations above. Problem: When navigating to my webpage.com/app, I get the error 500. I consulted apache logs, it says: [warn] proxy: No protocol handler was valid for the URL /app. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Update: This is running in ubuntu. I resolved this by adding LoadModule proxy_http_module modules/mod_proxy_http.so to my httpd.conf. Now I have another question: How can I make this proxy to work on SSL through port 443?

  Read the article

• How to maintain PCI compliance on a LAMP server when repositories don't keep up with versions

  - by Jared Green

  We run Ubuntu Lucid 10.0.4 as the foundation of our LAMP environment. We are trying to become PCI compliant so that we can pass CC info through our server. We have run some third-party scans on our servers to begin the certification process and have run into errors regarding PHP 5 versions and Apache versions. The latest PHP version hosted in our official lucid repository is about 10 versions lower than what PCI compliance requires. How do we upgrade to stay current with PCI compliance requirements? We need to get from php 5.3.2 to php 5.3.15 As well as up to apache 2.2.23 I've searched far and wide for an answer and haven't come up with a realistic answer. Some recommend compiling manually - which sounds like a nightmare, and others recommend a PPA - which sounds insecure. What should we do?

  Read the article

• Nameserver not resolving or domain not pingable [closed]

  - by Ricky

  Sorry, if anyone can think of a better title please change it! I want to host my own websites from home. For testing purposes, I have a virtual machine running a trial version of Windows Server 2008 Enterprise. Note I currently run a VPS and host my own websites but due to a nice speed upgrade on our line I now want to host from home. I have several domains but I wanted to test with one, that is rickyoleary.com. Our ISP does not provide static IP addresses unless we have a business account so I've been looking at no-ip.com. I admit my networking isn't the best, hence this question but I've been bashing my head all day on this one. I created a host name, muffinbubble.no-ip.org which runs on IP: 86.148.124.15. I've setup IIS on the server with a simple test page. I've then forwarded port 80 traffic from the router and from what I can see, it's working. If I access my website (I was unable to link to this for some reason so please copy and paste this) - http://86.148.124.15/ - I see my test page. So the next step was to create my nameservers. This domain is with namecheap.com so I created my nameservers, ns1.rickyoleary.com and ns2.rickyoleary.com. Both these point to the same IP (and yes, that will be changed after testing), the same IP as above: 86.148.124.15. On the server itself I have set up DNS entries as below which I believe to be correct and added rickyoleary.com and www.rickyoleary.com in the host headers (or bindings) in IIS 7.0. If I try and look up my domain, rickyoleary.com it shows ns1.rickyoleary.com and ns2.rickyoleary.com as the nameservers. I then tried to use just-ping.com on my nameserver ns1.rickyoleary.com. I get 100% packets lost, but the correct IP address is returned (I'm guessing the router does not allow pings, but is still accessible...). I get no response when pinging rickyoleary.com. Here's the problems: I cannot ping ns1.rickyoleary.com or ns2.rickyoleary.com from a command prompt. I'm not sure if this is an issue. When I added the nameservers in Windows Server 2008 and clicked 'resolve' a message box displays stating "No such host is known". I cannot ping rickyoleary.com. rickyoleary.com is not showing my test page on my server. Now - please note, I've waited around 6 hours for propagation. From my experience, although you're told to wait 24 - 48 hours, the changes are normally pretty quick so perhaps I'm being impatient or naive to think it should all be working fine until then. I would really appreciate some help here. Thanks.

  Read the article

• http.conf setup to simplify using 'localhost:81'

  - by Will

  I'm installing portable wampserver within my dropbox folder so I can access anywhere. I have this achieved and accessible using http://locahost:81 I want to access it by using a different address (dropping the :81 port number) such as http://myothersite. I'm fairly certain I need to add a virtualhosts directove somewhere within this, but I am not Apache experienced! This is the current Apache httpd.conf file: ServerRoot "C:/Users/will/Dropbox/Wampee-2.1-beta-2/bin/apache/apache2.2.17" Listen 81 ServerAdmin admin@localhost ServerName localhost:81 DocumentRoot "C:/Users/will/Dropbox/Wampee-2.1-beta-2/www/" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Users/will/Dropbox/Wampee-2.1-beta-2/www/"> Options Indexes FollowSymLinks AllowOverride all # onlineoffline tag - don't remove Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> <IfModule dir_module> DirectoryIndex index.php index.php3 index.html index.htm </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "C:/Users/will/Dropbox/Wampee-2.1-beta-2/logs/apache_error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "C:/Users/will/Dropbox/Wampee-2.1-beta-2/logs/access.log" common #CustomLog "logs/access.log" combined </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "cgi-bin/" </IfModule> <IfModule cgid_module> #Scriptsock logs/cgisock </IfModule> <Directory "cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .php3 </IfModule> # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include "C:/Users/will/Dropbox/Wampee-2.1-beta-2/alias/*" Include "C:/Users/will/Dropbox/Wampee-2.1-beta-2/MyWebAp ps/etc/alias/*"

  Read the article

• Configure static IP with port number which will point to multiple projects on different ports

  - by Yogesh Kadam

  I am developing a project in LAM* and using the Symfony framework. I have one static IP like 99.99.99.99:8000 which points on my Linux server machine. This static IP already has port number of 8000. This Linux server machine has multiple project hosted on it and we access each project in LAN with different port number like abc:81, pqr:82, xyz:83. Is is possible to access each project on same Linux machine by this static IP? If yes then please let me know how to configure and call each project using this IP address.

  Read the article

• Binding MySQL to run from the public or private LAN IP address - which one is faster

  - by Lamin Barrow

  So we have 2 servers all running at the same web host. We have bind MySQL to listen on the public ip-address of the database server and the web server connects to it from the public ip. Both servers run on the same private network. Currently, the DB connect method from our php script takes about 3ms to connect to the MySQL database server host. My question is, would MySql data interaction from the web server be faster if we bind it to listen on the private lan address on the database server instead of the public IP? or is it the same regardless and it wont make a different. i have moved this question to server fault http://serverfault.com/questions/438156/binding-mysql-to-run-from-the-public-or-private-lan-ip-address-which-one-is-fa

  Read the article

• httpd Redirect / Rewrite .com to .org

  - by David W

  I am trying to redirect a www.example.com to www.example.org. I cannot figure out what I'm doing wrong. I have ensured that mod_rewrite is enabled in httpd.conf with: LoadModule rewrite_module modules/mod_rewrite.so I further verify this by running: httpd -M and getting rewrite_module (shared) included in the results. Later in the same httpd.conf file is the VirtualHost directive where I am trying to perform the rewrite: <VirtualHost *:80> Options +FollowSymlinks RewriteEngine On RewriteCond %{HTTP_HOST} ^example.com [NC] RewriteRule ^(.*)$ http://www.example.org/$1 [R=301,NC,L] ServerAdmin [email protected] DocumentRoot /var/www/html ServerName example.org ServerAlias www.example.org *.example.org <Directory "/var/www/html"> Options Includes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> ErrorLog /var/www/logs/error_log CustomLog /var/www/logs/access_log common </VirtualHost> As we can see, we are following SymLinks in the directory (which I believe is a requirement), AND we allow All Overrides (which meets another requirement). But obviously I'm still doing something wrong. Can you spot it?

  Read the article

• Domain of sender address does not resolve (in reply to MAIL FROM command)

  - by horen

  When sending out emails with postfix I sometimes get this error: 451 #4.1.8 Domain of sender address <[email protected]> does not resolve (in reply to MAIL FROM command) The domain mydomain.tld is resolvable though, meaning A, MX, PTR records are set properly. However, the sending server does have a different domain anotherdomain.tld but it is allowed to send emails from mydomain.tld since I set the MX records of mydomain.tld to anotherdomain.tld. The envelope from of the problematic emails is [email protected]. Is there some other dns entry I have to set? Or how else could I solve the problem? (I would like to keep the server structure though)

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• extension shortcuts in chrome dont have text in them, windows 7

  - by bboyreason

  I have a few extensions next to my URL bar in chrome on windows 7. When I press any of them, or even the bookmark star, the text box that pops up is clear. I am using the following extensions: ablock plus, googleTranslate, firebugLite, ghostery, avastWebRep, Ultimate UserAgent switcher, Web developer toolbar, desprotetor de links, DNT plus, and WOT. I am set to block popups but not javascript in chrome and have a blackout theme installed. any ideas?

  Read the article

• Sonicwall 3500 (Creating VLANS for usage of multiple SSID)

  - by Thomas Chia

  I have an issue here. Here is my setup: X0 - STAFF network | X2 - AGENT network | X4 - Wireless AP (for multiple SSID) Okay, basically I'm going to set up the wireless AP to be broadcasting 2 SSID, STAFF-WIFI and AGENT WIFI. When connected to STAFF-WIFI, the users will be connected to the STAFF network, while connected to the AGENT WIFI, the users will be connected to the AGENT network. Can someone explain in details how to go about setting up this configuration? Thanks!

  Read the article

• 3 TB HDD won't reactivate

  - by isif

  After doing a clean install of Windows 8 my Seagate 3 TB HDD won't reactivate in Disk Management. The two volumes are there but I can't use them for some reason. The drive was previously used with a GPT partition table, I can see the two spanned volumes but can't reactivate either. I backed up all my files from Windows 7 onto that drive and desperately need them back. What can and should I do to get the drive back up and running? When I go to Disk → Properties → Volumes, it claims the drive has a MBR partition style, so converting to GPT somehow without data loss should work. gDisk claims to be able to do that but when I point it to the drive, it claims that it has a GPT partition and a protected MBR partition. Any suggestions on what to do?

  Read the article

• Find all duplicate files by md5 hash

  - by Jamie Curran

  I'm trying to find all duplicate files based upon md5 hash and ordered by file size. So far I have this: find . -type f -print0 | xargs -0 -I "{}" sh -c 'md5sum "{}" | cut -f1 -d " " | tr "\n" " "; du -h "{}"' | sort -h -k2 -r | uniq -w32 --all-repeated=separate The output of this is: 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture.sh 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture2.sh 1832348bb0c3b0b8a637a3eaf13d9f22 4.0K ./picture2.s d41d8cd98f00b204e9800998ecf8427e 0 ./test(1).log Is this the most efficient way?

  Read the article

• Varnish "FetchError no backend connection" error

  - by clueless-anon

  Varnishlog: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829925 1.0 12 SessionOpen c 79.124.74.11 3063 :80 12 SessionClose c EOF 12 StatSess c 79.124.74.11 3063 0 1 0 0 0 0 0 0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829928 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829931 1.0 12 SessionOpen c 108.62.115.226 46211 :80 12 ReqStart c 108.62.115.226 46211 467185881 12 RxRequest c GET 12 RxURL c / 12 RxProtocol c HTTP/1.0 12 RxHeader c User-Agent: Pingdom.com_bot_version_1.4_(http://www.pingdom.com/) 12 RxHeader c Host: www.mysite.com 12 VCL_call c recv lookup 12 VCL_call c hash 12 Hash c / 12 Hash c www.mysite.com 12 VCL_return c hash 12 VCL_call c miss fetch 12 FetchError c no backend connection 12 VCL_call c error deliver 12 VCL_call c deliver deliver 12 TxProtocol c HTTP/1.1 12 TxStatus c 503 12 TxResponse c Service Unavailable 12 TxHeader c Server: Varnish 12 TxHeader c Content-Type: text/html; charset=utf-8 12 TxHeader c Retry-After: 5 12 TxHeader c Content-Length: 418 12 TxHeader c Accept-Ranges: bytes 12 TxHeader c Date: Wed, 27 Jun 2012 20:45:31 GMT 12 TxHeader c X-Varnish: 467185881 12 TxHeader c Age: 1 12 TxHeader c Via: 1.1 varnish 12 TxHeader c Connection: close 12 Length c 418 12 ReqEnd c 467185881 1340829931.192433119 1340829931.891024113 0.000051022 0.698516846 0.000074035 12 SessionClose c error 12 StatSess c 108.62.115.226 46211 1 1 1 0 0 0 256 418 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829934 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1340829937 1.0 netstat -tlnp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3086/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1915/varnishd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1279/sshd tcp 0 0 127.0.0.2:25 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:6082 0.0.0.0:* LISTEN 1914/varnishd tcp 0 0 127.0.0.2:9000 0.0.0.0:* LISTEN 1317/php-fpm.conf) tcp 0 0 127.0.0.2:3306 0.0.0.0:* LISTEN 1192/mysqld tcp 0 0 127.0.0.2:587 0.0.0.0:* LISTEN 3195/sendmail: MTA: tcp 0 0 127.0.0.2:11211 0.0.0.0:* LISTEN 3072/memcached tcp6 0 0 :::8080 :::* LISTEN 3086/nginx tcp6 0 0 :::80 :::* LISTEN 1915/varnishd tcp6 0 0 :::22 :::* LISTEN 1279/sshd /etc/nginx/site-enabled/default server { listen 8080; ## listen for ipv4; this line is default and implied listen [::]:8080 default ipv6only=on; ## listen for ipv6 root /usr/share/nginx/www; index index.html index.htm index.php; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ /index.html; } location /doc { root /usr/share; autoindex on; allow 127.0.0.2; deny all; } location /images { root /usr/share; autoindex off; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.2:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } /etc/nginx/sites-enabled/www.mysite.com.vhost server { listen 8080; server_name www.mysite.com mysite.com.net; root /var/www/www.mysite.com/web; if ($http_host != "www.mysite.com") { rewrite ^ http://www.mysite.com$request_uri permanent; } index index.php index.html; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } # Deny all attempts to access hidden files such as .htaccess, .htpasswd, .DS_Store (Mac). location ~ /\. { deny all; access_log off; log_not_found off; } location / { try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; location ~* \.(jpg|jpeg|png|gif|css|js|ico)$ { expires max; log_not_found off; } location ~ \.php$ { try_files $uri =404; include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.2:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } include /var/www/www.mysite.com/web/nginx.conf; location ~ /nginx.conf { deny all; access_log off; log_not_found off; } } /etc/varnish/default.vcl # This is a basic VCL configuration file for varnish. See the vcl(7) # man page for details on VCL syntax and semantics. # # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.2"; .port = "8080"; # .connect_timeout = 600s; #.first_byte_timeout = 600s; # .between_bytes_timeout = 600s; # .max_connections = 800; Note: uncommenting the last four options at default.vcl made no difference. cat /etc/default/varnish # Configuration file for varnish # # /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK # to be set from this shell script fragment. # # Should we start varnishd at boot? Set to "yes" to enable. START=yes # Maximum number of open files (for ulimit -n) NFILES=131072 # Maximum locked memory size (for ulimit -l) # Used for locking the shared memory log in memory. If you increase log size, # you need to increase this number as well MEMLOCK=82000 # Default varnish instance name is the local nodename. Can be overridden with # the -n switch, to have more instances on a single server. INSTANCE=$(uname -n) # This file contains 4 alternatives, please use only one. ## Alternative 1, Minimal configuration, no VCL # # Listen on port 6081, administration on localhost:6082, and forward to # content server on localhost:8080. Use a 1GB fixed-size cache file. # # DAEMON_OPTS="-a :6081 \ # -T localhost:6082 \ # -b localhost:8080 \ # -u varnish -g varnish \ # -S /etc/varnish/secret \ # -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" ## Alternative 2, Configuration with VCL # # Listen on port 6081, administration on localhost:6082, and forward to # one content server selected by the vcl file, based on the request. Use a 1GB # fixed-size cache file. # DAEMON_OPTS="-a :80 \ -T 127.0.0.2:6082 \ -f /etc/varnish/default.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" If you need any other info let me know. I am all out of clue as to whats the problem.

  Read the article

• Remote Desktop or Streaming Software/Services that Supports Gaming

  - by Griffin

  I've simply been amazed by the quality and speed of Onlive, as this technology has the potential of making hardware requirements irrelevant to the average user. However, at the moment Onlive is only for remotely controlling video games, and not desktops or other devices in general. I'm in pursuit of software or services that can accomplish this as well as Onlive does. I need: viewer (client) program portability (able to run on a USB stick) DirectX, OpenGL / full-screen game compatibility on the server side.** Gaming-acceptable color/scaling quality and responsiveness. I have a very powerful desktop at home and I want to be able to access this raw power from any other computer that I stick my USB into (in the same way Onlive gives gamers use of their powerful servers) What software/services has most of the above? NOTE: please specify what features your suggestion doesn't have.

  Read the article

• Realtek audio AC 97 5.1 on Windows 7: Terrible subwoofer quality

  - by Edu

  I have a media center PC with on-board Realtek AC97 Audio. I have been using Windows XP for a couple of years with great audio quality. I just upgraded this PC with Windows 7 and installed the latest Realtek drivers from http://www.realtek.com.tw/downloads/ At the testing screen, all the speakers works correctly (including subwoofer). Despite that, while playing any movie or music, the subwoofer quality is terrible. From it it just comes noises, in the correct rhythm but quite low and quite out of tone. I compensated the loudness by putting the other speakers lower but the sound of the subwoofer is really terrible. Is there anyone facing the same problem? Does anyone have a workaround for that? PS.: I had gone past the steps given in Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip but still I have a bad quality of sound. My problem is very similar to the one in http://www.mp3car.com/car-audio/143796-realtek-hd-audio-is-robbing-my-subwoofer.html

  Read the article

• My Logitech G35 headphones aren't very loud on Linux (fedora 14) why?

  - by DarkMantis

  I have recently purchased a set of G35 headphones. They seem to be very loud when I use them on Windows, but when I try and use them on Fedora 14, they are very quiet and I can't seem to make them louder. I have obviously checked the sound settings in Gnome, and they are all up full. I have got ALSA-mixer installed but seems to make no difference. There doesn't seem to be any specific drivers for these headphones for Linux. Anyone know how to make them go a bit louder?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >