Daily Archives

Articles indexed Sunday October 21 2012

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• RAID 5 Install on Ubuntu Server 12.04 [closed]

  - by tarabyte

  Environment: Ubuntu Server 12.04, installing from bootable flash drive Error: No root file system is defined. Please correct this from the partitioning menu. I'm trying to set up a personal file server with software RAID 5. I just got three hard drives for this, but haven't found any solid documentation. I'm unsure what the basic way to partition my hard drives is. Can someone upload a screenshot of their "partition disks" screen so that I can compare with mine (attached)? Should I set the bootable flag? Do I need a /home partition? A /boot partition? Should I "Use [my partition] as: Ext4 journaling file system"? Or make that field "physical volume for RAID"? I am an engineer, but I have only a cursory knowledge of all-things-linux. If you know of any good learning resources I'd be happy to hear about those too (that way I don't have to blindly follow deprecated tutorials online). well, image would be here but i don't have a high enough reputation yet (please vote up :)) Thank you, References I've looked into: https://help.ubuntu.com/community/Installation/SoftwareRAID https://help.ubuntu.com/12.04/serverguide/advanced-installation.html http://forevergeeks.com/setup-ubuntu-server-with-raid-5/

  Read the article

• Idle VMware Guests Resource Consumption

  - by Ravenor

  I want to setup a number of guests with multiple CPUs (4) and at least 4Gb ram running Ubuntu Linux. These machines will mostly be idle, but from time to time their workload will require all their resources, especially the CPU. The hosts are ESXi 5.x. The question is, am I right in thinking that the resource consumption of the machines when idle will be negligible? We know this true of disk and the CPU. The only concern left therefore is memory. Since ESX over-commits memory it makes sense that unused memory of any guest is paged out. If my thinking correct?

  Read the article

• Uninstall last n of ports/packages

  - by Radio

  While compiling some port, I realized that it depends on 1000+ of other ports and will install forever until I die or my disk is full (my hdd is really small). I interrupted make install clean. How do I uninstall and clean those dependencies which have already been built and installed? (there are at least 100+ of them) pkg_cutleaves wont work in this case, since the main port wasn't registered yet. Please help. FreeBSD 9.0-RELEASE amd64 EDIT: Another way to ask this question: How can I see all dependencies for a non-registered port, and all subdependencies for those dependencies, independent with previously installed ports or their [sub]dependencies?

  Read the article

• Varnish cached 'MISS status' object?

  - by Hesey

  My site uses nginx, varnish, jboss. And some url will be cached by varnish, it depends a response header from jboss. The first time, jboss tells varnish doesn't cache this url. Then the second request, jboss tells varnish to cache, but varnish won't cache it. I used varnishstat and found that 1 object is cached in Varnish, is that the 'MISS status' object? I remove grace code and the problem still exists. When I PURGE this url, varnish works fine and cache the url then. But I can't PURGE so much urls every startup time, how can I fix this? The configuration: acl local { "localhost"; } backend default { .host = "localhost"; .port = "8080"; .probe = { .url = "/preload.htm"; .interval = 3s; .timeout = 1s; .window = 5; .threshold = 3; } } sub vcl_deliver { if (req.request == "PURGE") { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Content-Type; remove resp.http.Server; remove resp.http.Date; remove resp.http.Accept-Ranges; remove resp.http.Connection; set resp.http.keeplive="true"; } else { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } } sub vcl_recv { if(req.url ~ "/check.htm"){ error 404 "N"; } if( req.http.host ~ "store." || req.request == "POST"){ return (pipe); } if (req.backend.healthy) { set req.grace = 30s; } else { set req.grace = 10m; } set req.http.x-cacheKey = "0"; if(req.url ~ "/shop/view_shop.htm" || req.url ~ "/shop/viewShop.htm" || req.url ~ "/index.htm"){ if(req.url ~ "search=y"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; }else if(req.url !~ "bbs=y" && req.url !~ "shopIntro=y" && req.url !~ "shop_intro=y"){ set req.http.x-cacheKey = req.http.host + "/index.htm"; } }else if(req.url ~ "/search"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; } if( req.http.x-cacheKey == "0" && req.url !~ "/i/"){ return (pipe); } if (req.request == "PURGE") { if (client.ip ~ local) { return (lookup); } else { error 405 "Not allowed."; } } if (req.url ~ "/i/") { set req.http.x-shop-url = req.original_url; }else { unset req.http.cookie; } } sub vcl_fetch { set beresp.grace = 10m; #unset beresp.http.x-cacheKey; if (req.url ~ "/i/" || req.url ~ "status" ){ set beresp.ttl = 0s; /* ttl=0 for dynamic content */ } else if(beresp.http.x-varnish-cache != "1"){ set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 0s; unset beresp.http.set-cookie; } else { set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 1800s; unset beresp.http.set-cookie; } } sub vcl_hash { hash_data(req.http.x-cacheKey); return (hash); } sub vcl_error { if (req.request == "PURGE") { return (deliver); } else { set obj.http.Content-Type = "text/html; charset=gbk"; synthetic {"<!--ve-->"}; return (deliver); } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "N"; } }

  Read the article

• WebsitePanel and BIND integration issues

  - by Fariborz Navidan

  I have setup a new Windows server with WebsitePanel stand alone server installed om. I have configured everything. When create a new space in WSP, the only information saved in the DNS zone file is the SOA record and no A record added. Each service has its own DNS zone template records but they are not reflected in domain's DNS zone. Also when delete the space, DNS zone is not deleted. I am using WebsitePanel 1.2.1

  Read the article

• Persistent static route stops working after VPN drops and reconnects

  - by user76157

  I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

  Read the article

• Connection problem between redmine and svn

  - by WombaT

  I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

  Read the article

• How can I display and log PHP errors on IIS7?

  - by Ben

  We're running PHP 5.2.5 on an IIS 7 Server and we're having problems making PHP errors visible... At the moment whenever we have a PHP error the server sends back a 500 error with the message "The page cannot be displayed because an internal server error has occurred." This might be a good setting for production websites but it's rather annoying on a development server... ;-) I have tried configuring php.ini to display errors to the screen as well as log them to a specific folder but it seems that the Server catches all errors before and prevents and handling by PHP... Does someone know what we have to do to make IIS display PHP errors on screen? Any links, tipps or tutorials on the subject would be appreciated!

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• All browsers refusing to load a specific image on a webpage?

  - by Johnson

  Out of nowhere today, all 3 of my browsers (FF/Chrome/IE, OS = Win7 x64) are refusing to load the homepage of interfacelift.com correctly. It works fine on other PC's in the house (on the same network), so it is definitely related to this one PC. The browser won't load the main image on the page correctly (even though the source code looks good), however if I direct the browser to the exact location of that image, then it displays fine. So obviously I can get the HTML index (which locates the resource) and I can get to the resource. So why heck isn't it displaying properly on the index page? It's almost as if the HTML rendering engine has gone bad, on all 3 browsers at once. I've browsed to a bunch of other sites (including sites very heavy on JS, with HTML much more complex than the one in question here) and am seeing nothing funny. Only thing wonky I've done with my PC in the past several hours was replacing the system file Magnifier.exe with a copy of cmd.exe while playing around with some of the ideas mentioned in this guide. However, I've since then restored the files to their previous state, and I don't know how Magnifier would be related to this even if I hadn't restored it. Any ideas? I'm stumped! EDIT: Here is what the broken page looks like in Chrome. And here is the image loaded correctly by itself.

  Read the article

• Windows 7 EFI Partition Deleted

  - by Sam Clark

  I converted my Windows 7 GPT disk to dynamic, which resulted in it being unable to boot. So I used EaseUs Partition Master on my second Win 7 installation to convert the disk back to basic. Now, I have one partition, which is my C: drive, and I can't figure out how to recovery my EFI partition. I no longer see the "Windows" entry in my EFI boot menu. The Windows 7 repair on the install DVD doesn't see my installation. Please let me know how to restore the EFI partition.

  Read the article

• How can I connect a Windows 8 PC to a Samba domain

  - by Paul

  I am using Samba 3, and want to join my Windows 8 PC to the Samba domain. Windows 8 cannot join out of the box, so I added the following registry entries: HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters DWORD DomainCompatibilityMode 1 DWORD DNSNameResolutionRequired 0 And now it talks to the Samba server ok, however I get the following error: And I notice that the machine name created on the samba server does not match its name: win-8jq3fg1n74e$:x:30003:30003:Machine:/var/lib/nobody:/bin/false It is like it is using an internal name. The following is the error in the smb.log [2012/10/21 14:26:16.099520, 0] passdb/pdb_interface.c:348(pdb_default_create_user) _samr_create_user: Running the command `/usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false win-8jq3fg1n74e$' gave 9 [2012/10/21 14:26:28.143224, 0] lib/util_sock.c:474(read_fd_with_timeout) [2012/10/21 14:26:28.143420, 0] lib/util_sock.c:1441(get_peer_addr_internal) getpeername failed. Error was Transport endpoint is not connected read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.

  Read the article

• How do I know which hardware components are compatible when building a computer?

  - by darkie15

  I am trying to setup my own new computer. I haven't done this before and hence needed guidance from all here. I can google out the results for steps to follow for setting up my machine, but I do not understand what components are compatible with each other? For example there must be specific models of motherboard that are compatible with Intel Core i5-2500K Sandy Bridge 3.3GHz. In general, if there is a website that can guide me on all compatible components, that would be great. If not, how would I be able to check compatibility?

  Read the article

• Android emulator performance on linux

  - by Rado

  I installed the android SDK and eclipse plugin on my laptop, but I was surprised to find out that the emulator eats up 100% of one of my cpu cores. I have exactly the same setup on a desktop machine that does not have this issue. Both computers are running arch linux and both were updated yesterday. Granted, the desktop has better hardware than the laptop, but I was expecting to get closer to 50% cpu usage than 100% on the laptop. Both android virtual devices have the same specs: CPU: ARM Target: Android 2.3.3 - API Level 10 Skin: WVGA800 SD Card: 512M hw.lcd.density: 240 vm.heapSize: 24 hw.ramSize: 256 Laptop host has Intel Core 2 T7200 @ 2GHz cpu with 2Gb RAM. Desktop host has AMD Phenom II X4 940 @ 3GHz cpu with 8Gb RAM. The android emulator uses only 1 core and here are the CPU usage results: Laptop: Cpu0 : 22.8%us, 76.5%sy, 0.0%ni, 0.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu1 : 11.2%us, 2.4%sy, 0.0%ni, 86.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055484k total, 1860304k used, 195180k free, 5276k buffers Swap: 2000088k total, 106872k used, 1893216k free, 350780k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2026 xyz 20 0 396m 207m 7192 R 100 10.3 4:11.58 emulator-arm Desktop: Cpu0 : 0.7%us, 0.0%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 1.3%us, 0.0%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 5.0%us, 1.3%sy, 0.0%ni, 91.9%id, 1.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.3%us, 0.3%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7666324k total, 6506808k used, 1159516k free, 1650960k buffers Swap: 8988348k total, 0k used, 8988348k free, 2867300k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2811 xyz 20 0 392m 220m 6276 S 8 2.9 0:33.58 emulator-arm Is there any way I can improve the emulator performance on the laptop? [UPDATE] I ran the emulator with the same settings, on the same laptop under Win7 and after starting up, it didn't use 100% of a CPU core unlike under linux. Also, I tried running the emulator from a terminal in Linux and I get this message when I don't get it under the desktop Linux host: Could not configure '/dev/hpet' to have a 1024Hz timer. This is not a fatal error, but for better emulation accuracy type: 'echo 1024 /proc/sys/dev/hpet/max-user-freq' as root. I'm not really familiar with rtc or hpet, but it doesn't seem that max-user-freq setting does anything, I still get the same warning.

  Read the article

• Modify registry for Internet Connection Sharing?

  - by Tim

  My OS is Windows XP. Quoted from How to Change the IP Range for the Internet Connection Sharing DHCP service Use Registry Editor to modify the data value of the IntranetInfo value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Settings\General The first number listed is the IP address of the internal IP address of the Connection Sharing host. The second number is the subnet IP address separated by a comma. Enter the first IP address of the new range followed by the subnet mask, separated by a comma. (For example, 169.254.0.1,255.255.0.0.). Modify the data value of the Start value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Addressing\Settings Change the value to the second address of the selected IP range. This address cannot be the same or a lower value than the IP address used for the IntranetInfo key. Modify the data value for the Stop value in the same registry key. Enter the last the IP address of the selected IP range. My registry table does not have Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing, and I don't know how to do with my registry table following the above three steps. Can someone guide me through it step by step?

  Read the article

• Can gnome windows (in Ubuntu) be individually themed?

  - by Peter.O

  (Yes, "individually themed" is an oxymoron, but I still want it.) I've just moved from Windows to Ubuntu Linux, and although I am enjoying this new adventure playground, I've encountered something quite unexpected... and its bugging me. It is probably because there are so many gnome apps in Ubuntu (... how strange :) This is great. and the range of available apps is excellent! ...but because of this one-stop-shop scenario, most of the windows look remarkably similar. I'm certainly not after bling-maximus, but I would like a few differentiating colours for my not-so-young eyes to help identify an app at a glance (especially in the compiz lists) ... I love compiz :) I thought it was just a bit of razzle-dazzle, and that alone would be enough, but it is actually very practical to boot. So, basically, I'm wondering if there is a way to theme individual window components on a per app basis... especially the window decoration; menu bar, etc. Thanks.

  Read the article

• Per directory ignore in TextMate

  - by tig

  I love idea of TextMate that any directory opened in it is already a project. But sometimes I it would be good to ignore files for certain dir and I don't like idea of creating project file in that dir or remembering how I named project file in some special folder like ~/.tmproject. Is there some sort of plugin or something like this which will allow me to ignore files in dir? Perfect solution would be reading .gitignore file.

  Read the article

• Problem with shared ssh keys

  - by warren

  Following the process I've used in other environments, I've tried setting-up shared keys between my Mac and my CentOS 4 webserver. I've seen the same problem with my older Ubuntu 7.10 workstation trying to connect via keys to the same webserver. I have tried both dsa and rsa keytypes (sshkeygen -t <type>). The sshd_config file on my webserver seems to be allowing key-based logins: RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys And my .ssh/authorized_keys has my dsa and rsa keys added. Where should I be looking for what to change next to make key-based logins "Just Work™"? Is it related to the line, #UseDNS yes and sshd is trying to do a reverse-lookup on my IP, but cannot because it's NAT'd?

  Read the article

• Is functional intellisense and code browsing more beneficial than the use of dependency injection containers

  - by Gavin Howden

  This question is really based on PHP, but could be valid for other dynamically typed, interpreted languages and specifically the methods of generating code insight and object browsing in development environments. We use PHPStorm, and find intellisense invaluable, but it is provided by some limited static analysis and parsing of doc comments. Obviously this does not lend well to obtaining dependencies through a container, as the IDE has no idea of the type returned, so the developer loses out on a plethora of (in the case of our framework anyway) rich documentation provided through the doc comments. So we start to see stuff like this: $widget = $dic->YieldInstance('WidgetA', $arg1, $arg2, $arg3, $arg4...)); /** * @var $widget WidgetA */ So that code insight works. In effect the comments are tightly bound, but worse they come out of sync when code is modified but not the comments: $widget = $dic->YieldInstance('WidgetB', $arg1, $arg2, $arg3, $arg4...)); /** * @var $widget WidgetA */ Obviously the comment could be improved by referencing a Widget interface, but then we might as well use a factory and avoid the requirement for the extra typing hints in the comments, and dic complexity / boiler plating. Which is more important to the average developer, code insight / intellisense or 'nirvana' decouplement?

  Read the article

• Do unit tests sometimes break encapsulation?

  - by user1288851

  I very often hear the following: "If you want to test private methods, you'd better put that in another class and expose it." While sometimes that's the case and we have a hiding concept inside our class, other times you end up with classes that have the same attributes (or, worst, every attribute of one class become a argument on a method in the other class) and exposes functionality that is, in fact, implementation detail. Specially on TDD, when you refactor a class with public methods out of a previous tested class, that class is now part of your interface, but has no tests to it (since you refactored it, and is a implementation detail). Now, I may be not finding an obvious better answer, but if my answer is the "correct", that means that sometimes writting unit tests can break encapsulation, and divide the same responsibility into different classes. A simple example would be testing a setter method when a getter is not actually needed for anything in the real code. Please when aswering don't provide simple answers to specific cases I may have written. Rather, try to explain more of the generic case and theoretical approach. And this is neither language specific. Thanks in advance. EDIT: The answer given by Matthew Flynn was really insightful, but didn't quite answer the question. Altough he made the fair point that you either don't test private methods or extract them because they really are other concern and responsibility (or at least that was what I could understand from his answer), I think there are situations where unit testing private methods is useful. My primary example is when you have a class that has one responsibility but the output (or input) that it gives (takes) is just to complex. For example, a hashing function. There's no good way to break a hashing function apart and mantain cohesion and encapsulation. However, testing a hashing function can be really tough, since you would need to calculate by hand (you can't use code calculation to test code calculation!) the hashing, and test multiple cases where the hash changes. In that way (and this may be a question worth of its own topic) I think private method testing is the best way to handle it. Now, I'm not sure if I should ask another question, or ask it here, but are there any better way to test such complex output (input)? OBS: Please, if you think I should ask another question on that topic, leave a comment. :)

  Read the article

• Why IDE has to be made in the language they are designed for?

  - by Em Ae

  Look at IntellijIDEA IDE, its a pretty sick ide but its made in Java and we all know that Java suck at GUI. Same goes for Eclipse. Though its way better and adopted SWT but it could have been best if it was developed in C/C++. We have really good systems now and thats why we don't feel that these IDES are nothing much but a memory hog. Why the IDE's have to be written in the language they are designed for ? Okay i know that IDE is a cool way to show how strong a language can be but even then someitmes, that specific language might not be best for a particular tastk.

  Read the article

• What is the usage of Splay Trees in the real world?

  - by Meena

  I decided to learn about balanced search trees, so I picked 2-3-4 and splay trees. What are the examples of splay trees usage in the real world? In this Cornell: http://www.cs.cornell.edu/courses/cs3110/2009fa/recitations/rec-splay.html I read that splay trees are 'A good example is a network router'. But from rest of the explanation seams like network routers use hash tables and not splay trees since the lookup time is constant instead of O(log n).

  Read the article

• broadcom BCM4318 firmware missing

  - by Lucas

  I tried sudo apt-get update && apt-cache search b43 sudo apt-get install firmware-b43-installer after that i get this error Can't update, Some index files failed to download i tried cd /var/lib/apt/lists/partial sudo rm gb.archive.ubuntu.com_ubuntu_dists_natty_multivers e_source_Sources OR sudo rm /var/lib/apt/lists/partial/gb.archive.ubuntu.com_ubuntu_dists_natty_multivers e_source_Sources another error cannot remove e_source_Sources

  Read the article

• overheating when using flash

  - by Ben

  I am having overheating issues when watching flash videos. Here is all the relevant information that I could think of. Please help. --Often when playing flash videos it operates at 95 degrees C. --Only gets that hot when on full screen (but still in the 80s otherwise) --Sometimes reaches 100 degrees and shuts down. --fan runs at around 4500 RPM when hot (not to mention I can here it speed up) --Happens under Ubuntu 12.04 and 12.10 (did not use Ubuntu before then) --Overheating happens on more than one site (for example youtube and Comedy Central) --My computer does not overheat otherwise. --Usually runs around 50-60 degrees C. --Maybe if compiling or doing updates can it get to 70 or 75 degree C. --Have a dual boot, and under Windows I do not have this issue. --I use firefox, but have the same issue if using Chrome --I have a Lenovo T410, currently running Ubuntu 12.10 --Intel® Core™ i5 CPU M 540 @ 2.53GHz × 4 --4 GB of memory, 64 bit OS --Graphics: NVS 3100M/PCIe/SSE2 Thanks and let me know if you need more info, Ben

  Read the article

• Why is ubuntu so sluggish?

  - by Evan

  I have noticed the trend that ubuntu is getting increasingly slower with each release. It used to be much faster than windows, but now it is really much slower. I have an Asus G74Sx with an i7 processor, 8Gb of RAM, and an Nvidia Geforce GTX 560M graphics card. I am currently using ubuntu 12.10, but will probably be going back to 12.04. Ubuntu is running as the native operating system. There is really no reason for terminal to take more than 25 seconds to open. I love all of the stuff behind ubuntu, what it stands for and everything, but I need to at least be able to open gedit without waiting 3 minutes for it to open. Sorry if this sounds like a rant, but I would really like to know what is going on and if there is anything I can do to get Ubuntu running at a more appropriate speed.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >