Daily Archives

Articles indexed Sunday November 11 2012

Page 1/14 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Hung JVM consuming 100% CPU

  - by Bogdan

  We have a JAVA server running on Sun JRE 6u20 on Linux 32-bit (CentOS). We use the Server Hotspot with CMS collector with the following options (I've only provided the relevant ones): -Xmx896m -Xss128k -XX:NewSize=384M -XX:MaxPermSize=96m -XX:+UseParNewGC -XX:+UseConcMarkSweepGC Sometimes, after running for a while, the JVM seems to slip into a hung state, whereby even though we don't make any requests to the application, the CPU continues to spin at 100% (we have 8 logical CPUs, so it looks like only one CPU does the spinning). In this state the JVM doesn't respond to SIGHUP signals (kill -3) and we can't connect to it normally with jstack. We CAN connect with "jstack -F", but the output is dodgy (we can see lots of NullPointerExceptions from JStack apparently because it wasn't able to 'walk' some stacks). So the "jstack -F" output seems to be useless. We have run a stack dump from "gdb" though, and we were able to match the thread id that spins the CPU (we found that using "top" with a per-thread view - "H" option) with a thread stack that appears in the gdb result and this is how it looks like: Thread 443 (Thread 0x7e5b90 (LWP 26310)): #0 0x0115ebd3 in CompactibleFreeListSpace::block_size(HeapWord const*) const () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #1 0x01160ff9 in CompactibleFreeListSpace::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #2 0x0123456c in Generation::prepare_for_compaction(CompactPoint*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #3 0x01229b2c in GenCollectedHeap::prepare_for_compaction() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #4 0x0122a7fc in GenMarkSweep::invoke_at_safepoint(int, ReferenceProcessor*, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #5 0x01186024 in CMSCollector::do_compaction_work(bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #6 0x011859ee in CMSCollector::acquire_control_and_collect(bool, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #7 0x01185705 in ConcurrentMarkSweepGeneration::collect(bool, bool, unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #8 0x01227f53 in GenCollectedHeap::do_collection(bool, bool, unsigned int, bool, int) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #9 0x0115c7b5 in GenCollectorPolicy::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #10 0x0122859c in GenCollectedHeap::satisfy_failed_allocation(unsigned int, bool) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #11 0x0158a8ce in VM_GenCollectForAllocation::doit() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #12 0x015987e6 in VM_Operation::evaluate() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #13 0x01597c93 in VMThread::evaluate_operation(VM_Operation*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #14 0x01597f0f in VMThread::loop() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #15 0x015979f0 in VMThread::run() () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #16 0x0145c24e in java_start(Thread*) () from /usr/java/jdk1.6.0_20/jre/lib/i386/server/libjvm.so #17 0x00ccd46b in start_thread () from /lib/libpthread.so.0 #18 0x00bc2dbe in clone () from /lib/libc.so.6 It seems that a JVM thread is spinning while doing some CMS related work. We have checked the memory usage on the box, there seems to be enough memory available and the system is not swapping. Has anyone come across such a situation? Does it look like a JVM bug? UPDATE I've obtained some more information about this problem (it happened again on a server that has been running for more than 7 days). When the JVM entered the "hung" state it stayed like that for 2 hours until the server was manually restarted. We have obtained a core dump of the process and the gc log. We tried to get a heap dump as well, but "jmap" failed. We tried to use jmap -F but then only a 4Mb file was written before the program aborted with an exception (something about the a memory location not being accessible). So far I think the most interesting information comes from the gc log. It seems that the GC logging stopped as well (possibly at the time when the VM thread went into the long loop): 657501.199: [Full GC (System) 657501.199: [CMS: 400352K->313412K(524288K), 2.4024120 secs] 660634K->313412K(878208K), [CMS Perm : 29455K->29320K(68568K)], 2.4026470 secs] [Times: user=2.39 sys=0.01, real=2.40 secs] 657513.941: [GC 657513.941: [ParNew: 314624K->13999K(353920K), 0.0228180 secs] 628036K->327412K(878208K), 0.0230510 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657523.772: [GC 657523.772: [ParNew: 328623K->17110K(353920K), 0.0244910 secs] 642036K->330523K(878208K), 0.0247140 secs] [Times: user=0.08 sys=0.00, real=0.02 secs] 657535.473: [GC 657535.473: [ParNew: 331734K->20282K(353920K), 0.0259480 secs] 645147K->333695K(878208K), 0.0261670 secs] [Times: user=0.11 sys=0.00, real=0.02 secs] .... .... 688346.765: [GC [1 CMS-initial-mark: 485248K(524288K)] 515694K(878208K), 0.0343730 secs] [Times: user=0.03 sys=0.00, real=0.04 secs] 688346.800: [CMS-concurrent-mark-start] 688347.964: [CMS-concurrent-mark: 1.083/1.164 secs] [Times: user=2.52 sys=0.09, real=1.16 secs] 688347.964: [CMS-concurrent-preclean-start] 688347.969: [CMS-concurrent-preclean: 0.004/0.005 secs] [Times: user=0.00 sys=0.01, real=0.01 secs] 688347.969: [CMS-concurrent-abortable-preclean-start] CMS: abort preclean due to time 688352.986: [CMS-concurrent-abortable-preclean: 2.351/5.017 secs] [Times: user=3.83 sys=0.38, real=5.01 secs] 688352.987: [GC[YG occupancy: 297806 K (353920 K)]688352.987: [Rescan (parallel) , 0.1815250 secs]688353.169: [weak refs processing, 0.0312660 secs] [1 CMS-remark: 485248K(524288K)] 783055K(878208K), 0.2131580 secs] [Times: user=1.13 sys =0.00, real=0.22 secs] 688353.201: [CMS-concurrent-sweep-start] 688353.903: [CMS-concurrent-sweep: 0.660/0.702 secs] [Times: user=0.91 sys=0.07, real=0.70 secs] 688353.903: [CMS-concurrent-reset-start] 688353.912: [CMS-concurrent-reset: 0.008/0.008 secs] [Times: user=0.01 sys=0.00, real=0.01 secs] 688354.243: [GC 688354.243: [ParNew: 344928K->30151K(353920K), 0.0305020 secs] 681955K->368044K(878208K), 0.0308880 secs] [Times: user=0.15 sys=0.00, real=0.03 secs] .... .... 688943.029: [GC 688943.029: [ParNew: 336531K->17143K(353920K), 0.0237360 secs] 813250K->494327K(878208K), 0.0241260 secs] [Times: user=0.10 sys=0.00, real=0.03 secs] 688950.620: [GC 688950.620: [ParNew: 331767K->22442K(353920K), 0.0344110 secs] 808951K->499996K(878208K), 0.0347690 secs] [Times: user=0.11 sys=0.00, real=0.04 secs] 688956.596: [GC 688956.596: [ParNew: 337064K->37809K(353920K), 0.0488170 secs] 814618K->515896K(878208K), 0.0491550 secs] [Times: user=0.18 sys=0.04, real=0.05 secs] 688961.470: [GC 688961.471: [ParNew (promotion failed): 352433K->332183K(353920K), 0.1862520 secs]688961.657: [CMS I suspect this problem has something to do with the last line in the log (I've added some "...." in order to skip some lines that were not interesting). The fact that the server stayed in the hung state for 2 hours (probably trying to GC and compact the old generation) seems quite strange to me. Also, the gc log stops suddenly with that message and nothing else gets printed any more, probably because the VM Thread gets into some sort of infinite loop (or something that takes 2+ hours).

  Read the article

• Implementing set operations in TSQL

  - by dotneteer

  SQL excels at operating on dataset. In this post, I will discuss how to implement basic set operations in transact SQL (TSQL). The operations that I am going to discuss are union, intersection and complement (subtraction).   Union Intersection Complement (subtraction) Implementing set operations using union, intersect and except We can use TSQL keywords union, intersect and except to implement set operations. Since we are in an election year, I will use voter records of propositions as an example. We create the following table and insert 6 records into the table. declare @votes table (VoterId int, PropId int) insert into @votes values (1, 30) insert into @votes values (2, 30) insert into @votes values (3, 30) insert into @votes values (4, 30) insert into @votes values (4, 31) insert into @votes values (5, 31) Voters 1, 2, 3 and 4 voted for proposition 30 and voters 4 and 5 voted for proposition 31. The following TSQL statement implements union using the union keyword. The union returns voters who voted for either proposition 30 or 31. select VoterId from @votes where PropId = 30 union select VoterId from @votes where PropId = 31 The following TSQL statement implements intersection using the intersect keyword. The intersection will return voters who voted only for both proposition 30 and 31. select VoterId from @votes where PropId = 30 intersect select VoterId from @votes where PropId = 31 The following TSQL statement implements complement using the except keyword. The complement will return voters who voted for proposition 30 but not 31. select VoterId from @votes where PropId = 30 except select VoterId from @votes where PropId = 31 Implementing set operations using join An alternative way to implement set operation in TSQL is to use full outer join, inner join and left outer join. The following TSQL statement implements union using full outer join. select Coalesce(A.VoterId, B.VoterId) from (select VoterId from @votes where PropId = 30) A full outer join (select VoterId from @votes where PropId = 31) B on A.VoterId = B.VoterId The following TSQL statement implements intersection using inner join. select Coalesce(A.VoterId, B.VoterId) from (select VoterId from @votes where PropId = 30) A inner join (select VoterId from @votes where PropId = 31) B on A.VoterId = B.VoterId The following TSQL statement implements complement using left outer join. select Coalesce(A.VoterId, B.VoterId) from (select VoterId from @votes where PropId = 30) A left outer join (select VoterId from @votes where PropId = 31) B on A.VoterId = B.VoterId where B.VoterId is null Which one to choose? To choose which technique to use, just keep two things in mind: The union, intersect and except technique treats an entire record as a member. The join technique allows the member to be specified in the “on” clause. However, it is necessary to use Coalesce function to project sets on the two sides of the join into a single set.

  Read the article

• Clarity is important, both in question and in answer.

  - by gerrylowry

  clarity is important ... i'm often reminded of the Clouseau movie in which Peter Sellers as Chief Inspector Clouseau asks a hotel clerk "Does your dog bite?" ... the clerk answers "no" ... after Clouseau has been bitten by the dog, he looks at the hotel clerk who says "That's not my dog".  Clarity is important, both in question and in answer. i've been a member of forums.asp.net since 2008 ... like many of my peers at forums.asp.net, i've answered my fair share of questions. FWIW, the purpose of this, my first web log post to http://weblogs.asp.net/gerrylowry is to help new members ask better questions and in turn get better answers. TIMTOWTDI  =.  there is more than one way to do it imho, the best way to ask a question in any forum, or even person to person, is to first formulate your question and then ask yourself to answer your own question. Things to consider when asking (the more complete your question, the more likely you'll get the answer you require): -- have you searched Google and/or your favourite search engine(s) before posting your question to forums.asp.net; examples: site:msdn.microsoft.com entity framework 5.0 c#http://lmgtfy.com/?q=site%3Amsdn.microsoft.com+entity+framework+5.0+c%23 site:forums.asp.net MVC tutorial c#http://lmgtfy.com/?q=site%3Aforums.asp.net+MVC+tutorial+c%23 -- are you asking your question in the correct forum?  look at the forums' descriptions at http://forums.asp.net/; examples: Getting Started If you have a general ASP.NET question on a topic that's not covered by one of the other more specific forums - ask it here. MVC Discussions regarding ASP.NET Model-View-Controller (MVC) C# Questions about using C# for ASP.NET development Note:  if your question pertains more to c# than to MVC, choosing the C# forum is likely to be more appropriate. -- is your post subject clear and concise, yet not too vague? compare these three subjects (all three had something to do with GridView):     (1)    please help     (2)    gridview      (3)    How to show newline in GridView  -- have you clearly explained your scenario? compare:  my leg hurts   with   when i walk too much, my right knee hurts in the knee joint  compare:  my code does not work    with    when i enter a date as 2012-11-8, i get a FormatException -- have you checked your spelling, your grammar, and your English? for better or worse, English is the language of forums.asp.net ... many of the currently 170000++ forums.asp.net are not native speakers of English; that's okay ... however, there are times when choosing the more appropriate words will likely get one a better answer; fortunately, there are web tools to help you formulate your question, for example, http://translate.google.com/.  -- have you provided relevant information about your environment? here are a few examples ... feel free to include other items to your question ... rule of thumb:  if you think a given detail is relevant, it likely is -- what technology are you using?    ASP.NET MVC 4, ASP.NET MVC 3, WebForms, ...  -- what version of Visual Studio are you using?  vs2012 (ultimate, professional, express), vs2010, vs2008 ... -- are you hosting your own website?  are you using a shared hosting service? -- are you experience difficulties in just one browser? more than one browser? -- what browser version(s) are you using?   ie8? ie9? ... -- what is your operating system?     win8, win7, vista, XP, server 2008 R2 ... -- what is your database?   SQL Server 2008 R2, ss2005, MySQL, Oracle, ... -- what is your web server?  iis 7.5, iis 6, .... -- have you provided enough information for someone to be able to answer your question? Here's an actual example from an O.P. that i hope is self-explanatory: I'm trying to make a simple calculator when i write the code in windows application it worked when i tried it in web application it doesn't work and there are no errors what should i do ??!! -- have you included unnecessary information? more than once, i've seen the O.P. (original post, original poster) include many extra lines of code that were not relevant to the actual question; the more unnecessary code that you include, the less likely your volunteer peers will be motivated to donate their time to help you. -- have you asked the question that you want answered? "Does this dog bite?" -- are your expectations reasonable? -- generally, persons who are going to answer your questions are your peers ... they are unpaid volunteers ... -- are you looking for help with your homework, work assignment, or hobby? or, are you expecting someone else to do your work for you?  -- do you expect a complete solution or are you simply looking for guidance and direction? -- you are likely to get more help by first making a reasonable effort to help yourself first Clarity is important, both in question and in answer. if you are answering someone else's question, please remember that clear answers are just as important as clear questions; would you understand your own answer? Things to consider when answering: -- have you tested your code example?  if you have, say so; if you've not tested your code example, also say so -- imho, it's okay to guess as long as you clearly state that you're guessing ... sometimes a wrong guess can still help the O.P. find her/his way to the right answer -- meanness does not contribute to being helpful; sometimes one may become frustrated with the O.P. and/or others participating in a thread, if that happens to you, be kind regardless; speaking from my own experience, at least once i've allowed myself to be frustrated into writing something inappropriate that i've regretted later ... being a meany does not feel good ... being kind and helpful feels fantastic! Tip:  before asking your question, read more than a few existing questions and answers to get a sense of how your peers ask and answer questions. Gerry P.S.:  try to avoid necroposting and piggy backing. necroposting is adding to an old post, especially one that was resolved months ago. piggy backing is adding your own question to someone else's thread.

  Read the article

• API Message Localization

  - by Jesse Taber

  In my post, “Keep Localizable Strings Close To Your Users” I talked about the internationalization and localization difficulties that can arise when you sprinkle static localizable strings throughout the different logical layers of an application. The main point of that post is that you should have your localizable strings reside as close to the user-facing modules of your application as possible. For example, if you’re developing an ASP .NET web forms application all of the localizable strings should be kept in .resx files that are associated with the .aspx views of the application. In this post I want to talk about how this same concept can be applied when designing and developing APIs. An API Facilitates Machine-to-Machine Interaction You can typically think about a web, desktop, or mobile application as a collection “views” or “screens” through which users interact with the underlying logic and data. The application can be designed based on the assumption that there will be a human being on the other end of the screen working the controls. You are designing a machine-to-person interaction and the application should be built in a way that facilitates the user’s clear understanding of what is going on. Dates should be be formatted in a way that the user will be familiar with, messages should be presented in the user’s preferred language, etc. When building an API, however, there are no screens and you can’t make assumptions about who or what is on the other end of each call. An API is, by definition, a machine-to-machine interaction. A machine-to-machine interaction should be built in a way that facilitates a clear and unambiguous understanding of what is going on. Dates and numbers should be formatted in predictable and standard ways (e.g. ISO 8601 dates) and messages should be presented in machine-parseable formats. For example, consider an API for a time tracking system that exposes a resource for creating a new time entry. The JSON for creating a new time entry for a user might look like: 1: { 2: "userId": 4532, 3: "startDateUtc": "2012-10-22T14:01:54.98432Z", 4: "endDateUtc": "2012-10-22T11:34:45.29321Z" 5: }   Note how the parameters for start and end date are both expressed as ISO 8601 compliant dates in UTC. Using a date format like this in our API leaves little room for ambiguity. It’s also important to note that using ISO 8601 dates is a much, much saner thing than the \/Date(<milliseconds since epoch>)\/ nonsense that is sometimes used in JSON serialization. Probably the most important thing to note about the JSON snippet above is the fact that the end date comes before the start date! The API should recognize that and disallow the time entry from being created, returning an error to the caller. You might inclined to send a response that looks something like this: 1: { 2: "errors": [ {"message" : "The end date must come after the start date"}] 3: }   While this may seem like an appropriate thing to do there are a few problems with this approach: What if there is a user somewhere on the other end of the API call that doesn’t speak English?  What if the message provided here won’t fit properly within the UI of the application that made the API call? What if the verbiage of the message isn’t consistent with the rest of the application that made the API call? What if there is no user directly on the other end of the API call (e.g. this is a batch job uploading time entries once per night unattended)? The API knows nothing about the context from which the call was made. There are steps you could take to given the API some context (e.g.allow the caller to send along a language code indicating the language that the end user speaks), but that will only get you so far. As the designer of the API you could make some assumptions about how the API will be called, but if we start making assumptions we could very easily make the wrong assumptions. In this situation it’s best to make no assumptions and simply design the API in such a way that the caller has the responsibility to convey error messages in a manner that is appropriate for the context in which the error was raised. You would work around some of these problems by allowing callers to add metadata to each request describing the context from which the call is being made (e.g. accepting a ‘locale’ parameter denoting the desired language), but that will add needless clutter and complexity. It’s better to keep the API simple and push those context-specific concerns down to the caller whenever possible. For our very simple time entry example, this can be done by simply changing our error message response to look like this: 1: { 2: "errors": [ {"code": 100}] 3: }   By changing our error error from exposing a string to a numeric code that is easily parseable by another application, we’ve placed all of the responsibility for conveying the actual meaning of the error message on the caller. It’s best to have the caller be responsible for conveying this meaning because the caller understands the context much better than the API does. Now the caller can see error code 100, know that it means that the end date submitted falls before the start date and take appropriate action. Now all of the problems listed out above are non-issues because the caller can simply translate the error code of ‘100’ into the proper action and message for the current context. The numeric code representation of the error is a much better way to facilitate the machine-to-machine interaction that the API is meant to facilitate. An API Does Have Human Users While APIs should be built for machine-to-machine interaction, people still need to wire these interactions together. As a programmer building a client application that will consume the time entry API I would find it frustrating to have to go dig through the API documentation every time I encounter a new error code (assuming the documentation exists and is accurate). The numeric error code approach hurts the discoverability of the API and makes it painful to integrate with. We can help ease this pain by merging our two approaches: 1: { 2: "errors": [ {"code": 100, "message" : "The end date must come after the start date"}] 3: }   Now we have an easily parseable numeric error code for the machine-to-machine interaction that the API is meant to facilitate and a human-readable message for programmers working with the API. The human-readable message here is not intended to be viewed by end-users of the API and as such is not really a “localizable string” in my opinion. We could opt to expose a locale parameter for all API methods and store translations for all error messages, but that’s a lot of extra effort and overhead that doesn’t add a lot real value to the API. I might be a bit of an “ugly American”, but I think it’s probably fine to have the API return English messages when the target for those messages is a programmer. When resources are limited (which they always are), I’d argue that you’re better off hard-coding these messages in English and putting more effort into building more useful features, improving security, tweaking performance, etc.

  Read the article

• No endpoint listening at.........

  - by Michael Stephenson

  I was having some very frustrating behaviour on our build server and while I found a number of articles online with similar error messages none of them helped me.  I thought I would just explain this here incase if helps me or anyone else in future.The error message we were getting is:There was no endpoint listening at http://localhostStubs.ExternalApplication/SampleService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more detailsOur scenario is as follows:We have a solution where a WCF service application hosting the WCF routing service is listening to the Windows Azure Service Bus Relay.  We have an acceptance test project in the solution which sends a message to the service bus which is then received by the WCF routing service and routed to SampleService.svc which is hosted in another IIS application on the same box.  A response is flowed back through to the test.  In the tests there are 5 scenarios simulating a successful message, and various error conditions.  On my developer machine it was working absolutely fine every time, and a clean build on my developer machine worked fine.  On the build server however one or more of the tests would fail each time with the above error message.  There didnt seem to be any pattern to which test would fail.The solution was building on a Windows 2008 R2 machine with IIS 7 and AppFabric Server installed with auto-start configured for the IIS Application which would be listening to service bus.After lots of searching online and looking at logs etc it turned out to be a simple solution to just restart the WAS service (Windows Process Activation Service) and the services it advised you to restart with it.  Hope this helps someone else

  Read the article

• Hyper-V Server 2012 with Zambezi AMD FX-Series - Hardware assisted virtualization not present

  - by Vazgen

  I'm trying to set up VDI across Windows Server 2012 VMs running on Hyper-V 2012. The wizard's compatibility check for the Virtualization Host server failed with "Hardware-assisted virtualization is not present on the server". I'm running an FX-8120 CPU and have the ASUS M5A97 motherboard. I know I'm supposed to enable No-Execute (Hyper-V Hardware Considerations) but I cannot find that or any other synonyms of it in my motherboards UEFI BIOS (NX, XD, EVP, XN... nothing). I found this: PAE/NX/SSE2 Support Requirement Guide for Windows 8 which in short says "Windows 8 and Windows Server 2012 requires that systems must have processors that support NX, and NX must be turned on for important security safeguards to function effectively and avoid potential security vulnerabilities." this leads me to believe NX is on by default if I was able to get this far and install Hyper-V 2012 and Windows Server 2012.. Also I tried to disable AVX in cmd with "bcdedit /set xsavedisable 1". Did not resolve My processor is Zambezi FX-8120 and also supports RVI/SLAT/other synonym: processor: Newegg Processor FX-8120 support proof: AMD Processors with Rapid Virtualization Indexing Required to Run Hyper-V in Windows 8 What's going on here? I bought this CPU specifically after I had the same problems with an older AMD Athelon II and made sure to buy one with AMD-V and RVI. Thank you

  Read the article

• postfix cannot getting my domain name?

  - by Kossel

  Hi I'm trying to setup webmin+postfix+dovecot+roundcube, for this moment I want things be as simple as possible so I'm using linux users as email accounts. I can send/receive from the same domain, I mean [email protected] can send/receive to/from [email protected] I tested smtp/imap with outlook and says no problem. if I send a mail from gmail it reject with error of: Technical details of temporary failure: The recipient server did not accept our requests to connect. when I login with roundcube the email address display in the right corner is something like user1@com and I get this error message from logs: [11-Nov-2012 07:39:03 +0400]: IMAP Error: Login failed for user1 from 187.150.xx.xx. Could not connect to com:143: php_network_getaddresses: getaddrinfo failed: Name or service not known in /var/www/webmail/program/include/rcube_imap.php on line 191 (POST /webmail/?_task=login&_action=login) it says Could not connect to com:143 looks like it cannot read the domain name. I used http://mxtoolbox.com/ to check the mx record and it says it can find the server of mail.mydomain.com. I quit sure the problema is from postfix or my server configs, but I have been looking for every config file and cannot find the answer of this. any suggestion I will appreciate. here are some of my configs (I don't want to make this question too long, I can provide any other information to solve this question): postfix main.cf #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_security_options = noanonymous smtpd_sasl_auth_enable = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = mydomain.com myhostname = mail.mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = $mydomain, $myhostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + virtual_alias_domains = mydomain.com smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated myorigin = $mydomain roundcube conf // ---------------------------------- // IMAP // ---------------------------------- $rcmail_config['default_host'] = '%d'; $rcmail_config['default_port'] = 143; $rcmail_config['imap_auth_type'] = null; $rcmail_config['imap_delimiter'] = null; $rcmail_config['imap_ns_personal'] = null; $rcmail_config['imap_ns_other'] = null; $rcmail_config['imap_ns_shared'] = null; $rcmail_config['imap_force_caps'] = false; $rcmail_config['imap_force_lsub'] = false; $rcmail_config['imap_force_ns'] = false; $rcmail_config['imap_timeout'] = 0; $rcmail_config['imap_auth_cid'] = null; $rcmail_config['imap_auth_pw'] = null; $rcmail_config['imap_cache'] = null; $rcmail_config['messages_cache'] = false;

  Read the article

• Configure VirtualHost to Rewrite HTTP://subdomain... to HTTPS://internaldirectory

  - by David Kaczynski

  How do I configure Apache to rewrite an http request for a subdomain to an https request for the correct directory? For example, I have the following VirtualHost configuration: However, this turns http://redmine...us into https://redmine...us/redmine. Also, changing RewriteRule ^(.*)$ https://%{HTTP_HOST}/redmine [R] to RewriteRule ^(.*)$ https://%{HTTP_HOST} [R] seems to simply redirect the HTTP request to HTTP://...us, which is currently the default /var/www/index.html page. Any suggestions?

  Read the article

• Online remount btrfs of root filesystem with different subvolume (snapshot) [migrated]

  - by goncalopp

  Let's say you have a btrfs root filesystem on an online system. You want to revert the filesystem to an earlier state, of which you have a snapshot: remount /dev/sdaX / -o remount,subvol=snapshots/Y For the record, I've done this in a test system, and it does not work. The command returns with no errors, but the subvolume mounted is the same. If this did work, what would be the consequences? My guess is that open file descriptors would still point to the old subvolume, thus possibly leading to "data loss" on the new subvolume, if one was not careful. Assuming one goes to the trouble of closing and reopening all open file descriptors, does this sound feasible? Or are there other types of problems?

  Read the article

• Rails/Mongo across multiple different geo-regions

  - by wmarbut

  I have a system that by necessity requires physical presence in three or more different locations and I need advice on structuring in such a way that my database stays replicated in a timely manner without horrible latency. I've seen mysql access and replication be incredibly slow when the application server was trying to talk to a node that wasn't physically collocated. In this case I am using mongodb. The stack is linux/passenger/ruby/rails/mongodb. The database is write heavy and read light. The infrastructure is Amazon EC2 The application layer must be physically located in 3 or more different locations. I can't justify this requirement further than it is a requirement. The database, however needn't be located in more than one location if it can be written to quickly from other locations. From reading mongo's documentation, mongo replication seems like more of a candidate than sharding b/c my datastore is not huge. However I don't see anything that addresses the issue of speed for servers communicating across large distances with potentially high latency.

  Read the article

• dnsmasq acts as the DHCP server for selected nodes overriding the existing DHCP server on the same LAN?

  - by user183394

  I am trying to set up a small "lab" at home. Like many modern homes, I have a regular DSL service which comes with a 2Wire 3600HGV router, which acts also as a DHCP server. Since I would like to PXE boot a few computers in my "lab" The 2Wire is inflexible to adjustments that I want to do I have used dnsmasq at work so I would like to use dnsmasq as the DHCP server for the few nodes in my "lab" if feasible. In the dnsmasq man page, there is the following: [...] -K, --dhcp-authoritative (IPv4 only) Should be set when dnsmasq is definitely the only DHCP server on a network. It changes the behaviour from strict RFC compliance so that DHCP requests on unknown leases from unknown hosts are not ignored. This allows new hosts to get a lease without a tedious timeout under all circumstances. It also allows dnsmasq to rebuild its lease database without each client needing to reacquire a lease, if the database is lost. [...] As far as I know, the ISC DHCP server can use the following to do what I would like to accomplish: authoritative; [...] subnet 192.168.1.0 netmask 255.255.255.0 { host nb0 { # only give DHCP information to this computer: hardware ethernet e8:9a:8f:17:70:42; fixed-address 192.168.1.10; option subnet-mask 255.255.255.0; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; # Non-essential DHCP options filename "/pxelinux.0"; } [...] But I much prefer dnsmasq's "all-in-one-ness". My question: do I have to couple the -K option with something else? As shown in the example above, the ISC DHCP server requires the mac addresses of managed nodes to be explicitly specified. Does dnsmasq have something similar? FYI, the machine on which I plan to run dnsmasq runs CentOS 6.3 64bit. It has a statically assigned IP address: 192.168.1.3.

  Read the article

• Transfer all 1&1 web and e-mail services to own Synology NAS using No-IP for DDNS

  - by Neo

  I have a domain x-treem.net. The registrar is DomainDiscover and I have a hosting package with 1&1 which includes web and e-mail. I also have an additional package with 1&1 - Microsoft Exchange which centralises all my e-mails, tasks, contacts, notes, etc. and I connect to it with my PC (Outlook) and my Android phone. I have just purchased a Synology NAS (DS213) and I can see I can run a web server (Web Station), e-mail server (Mail Server) on it amongst other things. I am behind a dynamic IP. So, I'm looking to get some clarification on what I must do to consolidate my services and make use of my NAS to do as much as possible and save third-party hosting costs. My registrar specifies nameservers as NS45.1AND1.CO.UK and NS46.1AND1.CO.UK. The MX record is mx00.1and1.co.uk and mx01.1and1.co.uk. I'm aware of the concept of DDNS and I am looking at using No-IP.com for this. This is where I need clarification. If I registered with the No-IP paid service and pointed my registrar to No-IP's nameservers, and used the DDNS support on my NAS (which supports No-IP), then any requests to x-treem.net would go to my NAS. Is that correct? Therefore, web requests would hit the web server on my NAS, and e-mails would hit the mail server on my NAS? So, given all of the above, I can then drop 1&1 completely and use my NAS for everything. I use MySQL, phpMyAdmin, phpBB on 1&1 all of which the Synology NAS appears to support in its available packages. As for Microsoft Exchange, Synology offers Zafara which appears to be a drop-in replacement for Exchange. Am I on the right track here, or is there anything I am missing?

  Read the article

• Check for updates of a specific Debian package list

  - by Erwan Queffélec

  The setup I run a Debian Squeeze host that I use to build a multilanguage project (python, java, php...) and generate custom packages (debian and RPM) automatically (through jenkins) The problem The target distributions of those Debian packages are Etch, Lenny and Squeeze. But our project has some native dependencies that are available only through the DebianRelease + 1 repository (i.e Lenny + 1 == Squeeze, Squeeze + 1 == Wheezy). We for example, need the jetty packages from Squeeze in Lenny, and the cyrus-imapd-2.4 packages from Wheezy in Squeeze. Some additional info : Some package we can simply 'backport by hand' by mirroring the DebianRelease + 1 packages to our own repositories. For instance, the jetty package from Squeeze will run fine on Lenny because it doesn't need an s**tload of additional dependencies However we do need to rebuild some packages. For instance, cyrus-imapd-2.4 from Wheezy has a lot of unsatisfied dependencies on Squeeze. So we need to rebuild it in Squeeze and then upload it to our repo. The question I need to have a simple way of knowing if they are any updates on those extra packages (both "normal" and "security" updates). I could write a simple script that runs weekly, get some parameters from a file, and generate an update report. Let's say the file looks like this: jetty:squeeze cyrus-imapd-2.4:wheezy The script should run as normal user not to mess up the system apt configuration and issue the appropriate commands to generate that report. Does Debian has some built-in apt-* commands/options dedicated to that kind of problem I could use to write this script ? If not, can someone think of another clean solution to achieve what I need ?

  Read the article

• Bootstrap a debian build environment and build source packages with no root privileges

  - by Erwan Queffélec

  On debian squeeze, I am trying to do the following : fetch sources package from the wheezy source repository bootstrap a squeeze chroot for several architectures build the packages for several architectures (i386, amd64 + all and any) I want both the fetching, bootstrapping and build operation to be scriptable, repeatable, and run as a normal user. For the environment setup, I want to make as little use of the root account as possible (install the necessary dependencies, and maybe some visudo stuff). If possible I would like to avoid using a VM (pbuilder with user mode linux) So far I have tried several things with pbuilder (require root), debootstrap (require root) with little success. Here is an example script of what I want to do (does not work): #/bin/bash set -e set -x this=`readlink -f $0` this_dir=`dirname $this` archs='i386 amd64 any all' pushd $this_dir/src # I actually want the following line to work with a repo that # is not in /etc/apt/sources.list but that is another question apt-get source cyrus-imapd-2.4 popd for arch in $archs do build_dir=$this_dir/build/$arch/ pbuilder --create --configfile $build_dir/pbuilderrc --buildresult $build_dir/ pbuilder --build --configfile $build_dir/pbuilderrc --buildresult \ $build_dir/ $this_dir/src/*.dsc # of course I want to use the .dput.cf in /home/myuser/ # and not in /root/ dput $build_dir/$arch/*.changes done

  Read the article

• AD Custom Attribute with unique value

  - by Zilog

  I have custom AD attribute added to my AD schema. Attribute's syntax is Unicode String. It is added to user class and the purpose of it is to store user ID of corporate ERP system. Problem is, that I can have two or more user objects with the same value stored in that attribute, which is something that I would like to avoid. Is there a way to configure AD attribute so it is unique within the domain boundary? (The same behavior as SAMAccountName attribute.) i.e : If there already exists user object in AD with this attribute set to "JSmith" and I try to set that attribute with the same value for another user, Direcory Services will refuse to update that object and give me "already exists" error. Domain functional level is windows 2003.

  Read the article

• what port should I open for mysql master-master replication?

  - by Vanddel

  I have two servers running php5-fpm and a load balancer running nginx, the three servers share /var/www/drupal using nfs. nfs is working correctly. I replicated the two servers' database using mysql master master replication. everything was working fine till I added my iptables rules. In my iptables script, I first drop all chains then I accept the ones I want, other than that there are no other drop statements. I opened port 3306 for mysql replication like this : (the rule is on both servers ) iptables -A INPUT -p tcp -s $ip_Of_Other_Server --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d $ip_Of_Other_Server --sport 3306 -j ACCEPT The problem is, when I run both servers and I try to log in using my account on drupal it doesn't log in although I find a successful log in attempt in drupal logs. When I run only one server of them I can log in normally. when I allow everything in my iptables rules it works normally. I believe there's some port I need to open using iptables for the replication to work correctly but I can't find which one to open.

  Read the article

• Building RPM containing passwords

  - by Kuf

  I need to be able to send an RPM to customers that will install the complete server, including Apache and MySQL. The customers will install it on a clean machine. After installation, the server should connect to our main DB, so I though of including the password in the RPM somehow, encrypted if possible. The reason I'm asking this is because I'm pretty sure that it's not wise to save the password in the rpm scripts. I was hoping that someone else had a similar problem and managed to solve that somehow. If anyone knows a way to do that, or have a better idea please share!

  Read the article

• Redirect URL using Mac OS X Server Lion

  - by pheedsta

  I have just set up a Mac Mini with OS X Lion Server to host my own website. I have registered multiple domain names, but I would like the user to be automatically redirected to my main domain name if they type in one of the others (i.e. if the user types in www.myotherdomain.com the URL will be forwarded instantly to www.mymaindomain.com). In the Web settings of Server.app, you can easily add additional domains (which works) but it does not change the URL in the browser to www.mymaindomain.com. It keeps www.myotherdomain.com whilst still displaying the correct pages. Does the redirects or alias options do what I want? I can't seem to work out how to use them (there seems to be no documentation that I can find). In Redirects, you need to enter: 'Redirect Type' (Exact Match or Regular Expression) 'Redirect Path' 'Destination URL' 'Redirect Status' (Original was permanently moved, etc) In Alias, you need to enter: 'Alias Type' (Exact Match or Regular Expression) 'Alias Path' 'Destination Folder' Any help would be great.

  Read the article

• XenServer 6.0.2 path to installation media contains non-ascii characters

  - by cmaduro

  XenServer 6.0.2 install fails no matter what I do. I have confirmed that the md5 checksum on my ISO file is good. I tried installing from a mounted ISO file (remotely via iKVM). I tried installing from physical media. I tried installing from a bootable USB stick (using syslinux + contents of the ISO) All attempts have yielded the same result: When verifying the installation media, at 0% initializing, the following is reported: "Some packages appeared to be damaged." followed by a list of pretty much all the gz2 and rpm packages. If I skip the media verification the installer proceeds and then gives me an error when it reaches "Installing from base pack" at 0% which states "An unrecoverable error has occurred. The error was: 'ascii' codec can't decode byte 0xff in position 20710: ordinal not in range(128) Please refer to your user guide, or contact a Technical Support Representative, for further details" there is one option left which is to reboot. Apparently at some point during the processing of the repositories on the installation media non-ascii characters are found, which causes the installer to quit. How do I fix this? Here are my specs TYAN S8236 motherboard 2 AMD Opteron 6234 processors LSI2008 card connected to 2 1TB Seagate Constellation drives SATA, 1 500GB Corsair m4 SSD SATA and 1 Corsair Forse 3 - 64GB SSD SATA Onboard SATA connected to a slim DVD-+RW. Onboard SAS connected to 2 IBM ESX 70GB 10K SAS drives (for XenServer) 256GB memory ================================================================================= Comments: According to pylonsbook.com "chances are you have run into a problem with character sets, encodings, and Unicode" – cmaduro 10 hours ago A clue is provided by "vmware.com/support/vsphere5/doc/…; Data migration fails if the path to the vCenter Server installation media contains non-ASCII characters When this problem occurs, an error message similar to: 'ascii' codec can't decode byte 0xd0 in position 30: ordinal not in range(128) appears, and the installer quits unexpectedly during the data migration process. – cmaduro 10 hours ago This is an error that python throws. And guess what, the .py extention of the file you have to edit in this link community.spiceworks.com/how_to/show/1168 means the installer is written in python. Python is interpreted, so now to find the install file responsible for this error. – cmaduro 6 hours ago The file that generates the error upon verification is /opt/xensource/installer/tui/repo.py. The error message appears around line 359. – cmaduro 2 hours ago I am fairly sure that the install error is generated somewhere in repository.py as the backend.py file throws errors while methods in that file are being called. Perhaps all errors can be traced back to this file. – cmaduro 1 hour ago

  Read the article

• Windows 7 boot manager editor as an option in boot manager

  - by Tomek

  Is there any boot manager editor that I can run in DOS (possibly) before the system will load and edit boot manager itself? I would like to delete, edit VHD's and other files, copying them from the network, changing the names and adding to the manager)? Are there any other boot managers that I can use to boot up Windows 7 and 2008 from VHD file? I would like to have flexibility similar to virtualization w/o performance hit and ability to use all 4 processors on the server (using Windows HPC Server).

  Read the article

• How do I remove a repository of yum

  - by sunil

  When I search for a package in yum(centos 6), it tries to search in a repro named 'c6-media' And it gives a bunch of errors as follows file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again Obviously the error seems to say that yum is trying to search for the CD/DVD which installed the OS. I do not have it now. All I want to do now is to delete this repository from yum. I went to the package manager graphical tool and removed this from the sources. Seems yum and the graphical tool do not use the same config. This is just my guess.

  Read the article

• Can access SSH but can't access cPanel web server

  - by Tom

  I've built a Cent OS 6.0 vps and then i've installed the latest cPanel/WHM. This isn't my first installation but i've noticed something weird especially that i've never used the 6.0 version.. when i tried to install cPanel, it didn't recognize wget so installed it, then cPanel said that Perl isn't installed, i've installed that and the installation went well since then. Now, when i've tried to access the server via the browser with the IP Adress as i've used to, it didn't work, it was just loading forever, i tried the 2087 port, still the same. but SSH works. I've also tried the commands to start the server manually but none of them worked. How to fix that? Edit: iptables -nL Result root@server [~]# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 Chain acctboth (2 references) target prot opt source destination tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:80 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:80 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:25 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:25 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:110 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:110 icmp -- 216.119.149.168 0.0.0.0/0 icmp -- 0.0.0.0/0 216.119.149.168 tcp -- 216.119.149.168 0.0.0.0/0 tcp -- 0.0.0.0/0 216.119.149.168 udp -- 216.119.149.168 0.0.0.0/0 udp -- 0.0.0.0/0 216.119.149.168 all -- 216.119.149.168 0.0.0.0/0 all -- 0.0.0.0/0 216.119.149.168 all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• o2cb thinks ocfs2 cluster is still online, and refuses to shut down

  - by Kendall

  I have a handful of OpenSuSE 11.2 servers that utilize OCFS2 volumes. I've noticed that o2cb can't figure out when the OCFS2 cluster is actually mounted. For example, when I try to shutdown o2cb, after stopping OCSF2, o2cb refuses to shutdown because it thinks OCFS2 is still up! After stopping OCFS2 I try to stop o2cb... hamguy:/dev/disk/by-label # /etc/init.d/o2cb stop Stopping O2CB cluster ocfs2: Failed Unable to stop cluster as heartbeat region still active So I check the status... hamguy:/dev/disk/by-label # /etc/init.d/o2cb status Driver for "configfs": Loaded Filesystem "configfs": Mounted Stack glue driver: Loaded Stack plugin "o2cb": Loaded Driver for "ocfs2_dlmfs": Loaded Filesystem "ocfs2_dlmfs": Mounted Checking O2CB cluster ocfs2: Online Heartbeat dead threshold = 31 Network idle timeout: 30000 Network keepalive delay: 2000 Network reconnect delay: 2000 Checking O2CB heartbeat: Active And double check OCFS2... hamguy:/dev/disk/by-label # /etc/init.d/ocfs2 status Configured OCFS2 mountpoints: /u/conf /u/logs /u/backup /u/client /u/data /u/mdata OCFS2 is clearly down, while o2cb clearly thinks otherwise. The versions of OCFS2 and o2cb are... kendall@hamguy:~> rpm -qa |grep ocfs2 ocfs2console-1.4.1-25.6.x86_64 ocfs2-tools-o2cb-1.4.1-25.6.x86_64 ocfs2-tools-1.4.1-25.6.x86_64 kendall@hamguy:~> rpm -qa |grep o2cb ocfs2-tools-o2cb-1.4.1-25.6.x86_64 What causes this, and is there a way around it? If I try to reboot the machine, it will just sit there forever until your physically power cycle it. That obviously is a bit of a problem. Any insight is appreciated, thank you. Kendall

  Read the article

• Why is business-class storage so expensive?

  - by Mark Henderson

  This is a Canonical Question about the Cost of Enterprise Storage. See also the following question: What's the best way to explain storage issues to developers and other users Regarding general questions like: Why do I have to pay 50 bucks a month per extra gigabyte of storage? Our file server is always running out of space, why doesn't our sysadmin just throw an extra 1TB drive in there? Why is SAN equipment so expensive? The Answers here will attempt to provide a better understanding of how enterprise-level storage works and what influences the price. If you can expand on the Question or provide insight as to the Answer, please post.

  Read the article

• How do I install PHP 5.3 on CentOS?

  - by fivelitresofsoda

  I have to install PHP 5.3 on my CentOS server. If I do yum install php, the base repository installs 5.1.6 which is too old for the applications I need to install. So I've been trying to use the IUS repository, following the official instructions from IUS: root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-2.ius.el5.noarch.rpm root@linuxbox ~]# wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm root@linuxbox ~]# rpm -Uvh ius-release*.rpm epel-release*.rpm OK. Now I simply do yum install php53, etc. for all I need... but I get this error: Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/bin/php from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/bin/php-cgi from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /usr/share/man/man1/php.1.gz from install of php53u-cli-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-cli-5.1.6-27.el5_5.3.x86_64 file /etc/php.ini from install of php53u-common-5.3.4-3.ius.el5.x86_64 conflicts with file from package php-common-5.1.6-27.el5_5.3.x86_64 Error Summary ------------- I have no idea on how to solve this. I think I have to delete the base packages. However, as someone new to Linux, I don't know how to do that.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >