Daily Archives

Articles indexed Tuesday November 13 2012

Page 1/17 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Evolución de software, los nuevos desafíos de la actual industria de software

  Evolución de software, los nuevos desafíos de la actual industria de software En este programa presentaremos una visión general de las oportunidades tecnológicas que favorecen la generación de emprendimientos regionales desde el equipo de relaciones para desarrolladores de la región de sur de Latinoamérica. Trataremos escenarios tecnológicos y principalmente el impacto en la evolución de software y el modelo de computación en la nube, finalmente analizaremos las oportunidades más importantes junto a diversos referentes regionales. Tecnología, desafíos, opiniones y todo el ecosistema representado por la pasión y el talento regional. From: GoogleDevelopers Views: 0 0 ratings Time: 02:00:00 More in Education

  Read the article

• Free online Windows AzureConf this Wednesday

  - by ScottGu

  This Wednesday, November 14th, we’ll be hosting Windows AzureConf – a free online event for and by the Windows Azure community.  It will be streamed online from 8:30am->5:00 PM PST via Channel 9, and you can watch it all for free. I’ll be kicking off the event with a Windows Azure overview in the morning (a great way to learn more about Windows Azure if you haven’t used it yet!), and following my talk the rest of the day will be full of excellent presentations from members of the Windows Azure community.  You can ask questions from them live and I think you’ll find the day an excellent way to learn more about Windows Azure – as well as hear directly from developers building solutions on it today. Click here to learn more about the event and register for free to watch it live.  Hope to see you there! Scott P.S. We will also make the presentations available for download after the event in case you miss them. 

  Read the article

• wmware fusion 5.0.1, LAN, disconnecting from server [closed]

  - by Maxim

  Currently I am using : OSX 10.7.5 VMWare:5.0.1 with windows 7 professional Problem: Getting disconnected from LAN game. Description: 4 of us are trying to play frozen throne on the same network. The thing is, they are all running windows computers, and I am running W7 on VMware. I haven't made any adjustments other than changing from "sharing internet with my mac" to Bridged network "autodetect". When we start to play, everything works then all of a sudden I get disconnected. This happens every once in a while, the timing differs from time to time. None of the others ever disconnects. What could be the problem? Thanks for the help!

  Read the article

• Postfix unable to create lock file, permission denied

  - by John Bowlinger

  I thought I had my postfix configuration all set up on my Amazon Ubuntu server but I guess not. I'm trying to set up an admin email account for 3 virtually hosted Apache websites. Here's my postfix main.cf file: myhostname = ip-XX-XXX-XX-XXX.us-west-2.compute.internal alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = ip-XX-XXX-XX-XXX.us-west-2.compute.internal, localhost.us-west-2.compute.internal, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all virtual_mailbox_domains = example1.com, example2.com, example3.com virtual_mailbox_base = /var/mail/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_minimum_uid = 100 virtual_uid_maps = static:115 virtual_gid_maps = static:115 virtual_alias_maps = hash:/etc/postfix/virtual Here's my vmailbox file: [email protected] example1.com/admin [email protected] example2.com/admin [email protected] example3.com/admin @example1.com example1.com/catchall @example2.com example2.com/catchall @example3.com example3.com/catchall And finally my virtual file: [email protected] postmaster [email protected] postmaster [email protected] postmaster When I try to send an email to through netcat to my one of my domains, I get: unable to create lock file /var/mail/vhosts/example1.com/admin.lock: Permission denied This is despite the fact that I set example1.com group to postfix and also my virtual_uid_maps and virtual_gid_maps are both set to Postfix group id of 115.

  Read the article

• Call 'script' command and exit it from within a bash script

  - by William Jamieson

  I'm using the linux 'script' command http://www.linuxcommand.org/man_pages/script1.html to log all input and output in an interactive bash script. At the moment I have to call the script command, then run my bash script, then exit. I want to run the script and exit commands from within the actual bash script itself. How can I do this? I've tried script -a but that doesn't work for interactive scripts. Any assistance would be greatly appreciated.

  Read the article

• Defeating the RAID5 write hole with ZFS (but not RAID-Z) [closed]

  - by Michael Shick

  I'm setting up a long-term storage system for keeping personal backups and archives. I plan to have RAID5 starting with a relatively small array and adding devices over time to expand storage. I may also want to convert to RAID6 down the road when the array gets large. Linux md is a perfect fit for this use case since it allows both of the changes I want on a live array and performance isn't at all important. Low cost is also great. Now, I also want to defend against file corruption, so it looked like a RAID-Z1 would be a good fit, but evidently I would only be able to add additional RAID5 (RAID-Z1) sets at a time rather than individual drives. I want to be able to add drives one at a time, and I don't want to have to give up another device for parity with every expansion. So at this point, it looks like I'll be using a plain ZFS filesystem on top of an md RAID5 array. That brings me to my primary question: Will ZFS be able to correct or at least detect corruption resulting from the RAID5 write hole? Additionally, any other caveats or advice for such a set up is welcome. I'll probably be using Debian, but I'll definitely be using Linux since I'm familiar with it, so that means only as new a version of ZFS as is available for Linux (via ZFS-FUSE or so).

  Read the article

• OpenVPN won't start on ubuntu - PID not found

  - by you8301083

  I am running ubuntu version 12.04 LTS and I have installed OpenVPN on it. After a while of troubleshooting why my client won't connect (I have generated keys and confligured the client), I ran 'service openvpn status' from the command line and received the following error: could not access PID file for VPN 'server' I have rebooted, started and restarted the service, but each time I check the status, I receive the PID error. I'm pretty sure that I can't connect because the service isn't running. Where can I begin troubleshooting this? I don't know what to look for. Any help is greatly appreciated. Thanks!

  Read the article

• ipv6 port 445 does not accept the request from a global type address

  - by blacktea

  I want to scan the port 445 in windows server 2003, but my scanner only have one type ipv6 address which is global not link-local. When I do this,I find that I can't find port 445 open. But I use the command "netstat -an" to assure the port 445 is listening. Finally I find this confusing phenomenon: 1.when I set a link-local ddress in my scanner, then it will work in scanning port 445. 2.when I only set a global address in my scanner, it doed not work. This means if a host with a link-local address use socket to send a syn packet to the port 445 in server 2003, it will receive a ack packet. But if with a global address it will receive a rst packet. Thus, I can't scan the port 445 in server 2003 with a global address. I need to know why? Can anybody help? And I use the netsh-firewall to check the exception and netsh-interface-ipv6 to turn off the firewall on the specific interface. Still can't establish the connection with port 445, do you have any ideal about this ?

  Read the article

• Does the mysql Client API Library version have to match the installed MySQL/Percona server version?

  - by William Jamieson

  I'm running Scientific Linux 6.3 (binary compaible with Redhat/CentOS/etc..) as a LAMP stack. I've installed Percona server and client v5.5 from the Percona yum repository. However when I run phpinfo() I notice that under the MySQL and mysqli sections, it lists the Client API Library version as 5.1.66, and not 5.5x. I'm guessing these need to match, at least to major versions, and I have no idea what the possible consequences of such a mismatch could be. Do I need to revert to Percona server and client v5.1? This is for a production environment so it needs to be right. I'd appreciate any input or experience people could offer. I'm running Scientific Linux 6.3 (binary compaible with Redhat/CentOS/etc..) as a LAMP stack. I've installed Percona server and client v5.5 from the Percona yum repository. However when I run phpinfo() I notice that under the MySQL and mysqli sections, it lists the Client API Library version as 5.1.66, and not 5.5x. I'm guessing these need to match, at least to major versions, and I have no idea what the possible consequences of such a mismatch could be. Do I need to revert to Percona server and client v5.1? This is for a production environment so it needs to be right. I'd appreciate any input or experience people could offer. (Note I will also be cross posting this on the Percona forums)

  Read the article

• Ubuntu web server cluster checks Ubuntu repository for script updates with cron

  - by StuartTheY

  I have a cluster of Ubuntu 12.04 web servers running a lamp stack. All of these servers are connected to a Load Balancer on Amazon Web Services. What I want to be able to do is have a dedicated Ubuntu server that I can update the PHP files on and have the other web servers check with cron to get the updates files from the repository. They don't have to use cron but that was the only thing I could think of, unless there was a way to have the updated repository tell them that it has updated files. And then how to transfer those files. Also if there is a ways for a server to check for updated files when it boots because I am going to be using auto scaling on AWS so when there is an increase in the load and another server gets created I need it to download the updated files from the repository when launched. Not sure how to transfer files from server to server.

  Read the article

• Access All VLANS over XenServer Interface

  - by Garrett

  For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

  Read the article

• Googlebot repeatedly looks for files that aren't on my server

  - by John at CashCommons

  I'm hosting a site for a volunteer organization. I've moved the site to WordPress, but it wasn't always that way. I suspect at one point it was hacked badly. My Apache error log file has grown to 122 kB in just the past 18 hours. The large majority of the errors logged are of this form -- it's repeated hundreds of times today alone in my log files: [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/calendar.php [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/404.shtml (I verified that xx.xxx.xx.xxx was a Google server.) I suspect there was a security hole somewhere before, likely in calendar.php, that was exploited. The files don't exist anymore, but there may be many backlinks that exist that reference here, hence why googlebot is so interested in crawling them. How do I fix this gracefully? I still would like Google to index the site. I just want to tell it somehow not to look for these files anymore.

  Read the article

• How can I kill and wait for background processes to finish in a shell script when I Ctrl+C it?

  - by slipheed

  I'm trying to set up a shell script so that it runs background processes, and when I ctrl+C the shell script, it kills the children, then exits. The best that I've managed to come up with is this. It appears that kill 0 -INT also kills the script before the wait happens, so the shell script dies before the children complete. Any ideas on how I can make this shell script wait for the children to die after sending INT? #!/bin/bash trap 'killall' INT killall() { echo **** Shutting down... **** kill 0 -INT wait # Why doesn't this wait?? echo DONE } process1 & process2 & process3 & cat # wait forever

  Read the article

• Website running on Tomcat port 8443 will only resolve with IP address, not dns

  - by littleK

  I recently set up a web server running tomcat 7 on Ubuntu 12.04. It is currently running on port 8080, however I just enabled SSL on port 8443. Here's my problem: For port 8080, the website is resolved with DNS: (http://www.mywebpage.com:8080) For port 8443, I can only access the website with the IP Address (http://0.0.0.0:8443). It will not work if I use the DNS name. I ultimately want to disable port 80 and use port 8443 only. Does anyone know why I cannot resolve the website on port 8443 using DNS, and how I might fix it? Thanks!

  Read the article

• Recovering with DDRescue Cannot Complete (write error: Read-only file system)

  - by c00lryguy

  I'm trying to recover a corrupt VDI using vdfuse to mount the VDI and using dd_rescue to rescue the borked partition. dd_rescue seems to be working fine but once it reached about half of the partition, it just STOPs and gives the following error: ddrescue: write error: Read-only file system Wait.. what? It suddenly turns the FS it is writing the recovered partition to into a read-only file system. Well... why? Will I never be able to finish this? What's going on?

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• Auto-Attach EBS-volume to a New Spot Instance?

  - by Jeff

  I am experimenting with EC2 spot instances, and am needing some data to be retained between terminations. Now as I understand it, when the current price goes above my max. bid, it will be automatically terminated. I assume any init scripts I have will be run on shutdown so I can push data off to the EBS before unmounting. My question is, how can I automatically mount the same EBS volume on the new spot instance once the price goes down, since it won't have any of my init scripts that I would've loaded onto the root volume the first time? Do I have to create a custom AMI, or is there some other way to achieve this?

  Read the article

• Can't Remove Logical Drive/Array from HP P400

  - by Myles

  This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

  Read the article

• Account Lockout with pam_tally2 in RHEL6

  - by Aaron Copley

  I am using pam_tally2 to lockout accounts after 3 failed logins per policy, however, the connecting user does not receive the error indicating pam_tally2's action. (Via SSH.) I expect to see on the 4th attempt: Account locked due to 3 failed logins No combination of required or requisite or the order in the file seems to help. This is under Red Hat 6, and I am using /etc/pam.d/password-auth. The lockout does work as expected but the user does not receive the error described above. This causes a lot of confusion and frustration as they have no way of knowing why authentication fails when they are sure they are using the correct password. Implementation follows NSA's Guide to the Secure Conguration of Red Hat Enterprise Linux 5. (pg.45) It's my understanding that that only thing changed in PAM is that /etc/pam.d/sshd now includes /etc/pam.d/password-auth instead of system-auth. If locking out accounts after a number of incorrect login attempts is required by your security policy, implement use of pam_tally2.so. To enforce password lockout, add the following to /etc/pam.d/system-auth. First, add to the top of the auth lines: auth required pam_tally2.so deny=5 onerr=fail unlock_time=900 Second, add to the top of the account lines: account required pam_tally2.so EDIT: I get the error message by resetting pam_tally2 during one of the login attempts. user@localhost's password: (bad password) Permission denied, please try again. user@localhost's password: (bad password) Permission denied, please try again. (reset pam_tally2 from another shell) user@localhost's password: (good password) Account locked due to ... Account locked due to ... Last login: ... [user@localhost ~]$

  Read the article

• openvpn: after changing to server mode, client does not create TUN device

  - by lurscher

  i had a previously working configuration with the config files used in a previous question However, i've changed this now to the following configuration using server mode, everything on the logs seem fine, however the client doesn't create any tun interface, so i don't have anything to connect to, presumably, i need to add or push some route commands, but i don't have any idea at this point what i need to do. I am posting all my relevant configuration files server.conf: dev tun server 10.8.117.0 255.255.255.0 ifconfig-pool-persist ipp.txt tls-server dh /home/lurscher/keys/dh1024.pem ca /home/lurscher/keys/ca.crt cert /home/lurscher/keys/vpnCh8TestServer.crt key /home/lurscher/keys/vpnCh8TestServer.key status openvpn-status.log log openvpn.log comp-lzo verb 3 and client.conf: dev tun remote my.server.com tls-client ca /home/chuckq/keys/ca.crt cert /home/chuckq/keys/vpnCh8TestClient.crt key /home/chuckq/keys/vpnCh8TestClient.key ns-cert-type server ; port 1194 ; user nobody ; group nogroup status openvpn-status.log log openvpn.log comp-lzo verb 3 the server ifconfig shows a tun device: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.117.1 P-t-P:10.8.117.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) However the client ifconfig does not show any tun interface! $ ifconfig tun0 tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) the client log says: Tue May 17 23:27:09 2011 OpenVPN 2.1.0 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:27:09 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:27:09 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:27:09 2011 LZO compression initialized Tue May 17 23:27:09 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:09 2011 TUN/TAP device tun0 opened Tue May 17 23:27:09 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:27:09 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:09 2011 Local Options hash (VER=V4): '41690919' Tue May 17 23:27:09 2011 Expected Remote Options hash (VER=V4): '530fdded' Tue May 17 23:27:09 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 17 23:27:09 2011 UDPv4 link local (bound): [undef] Tue May 17 23:27:09 2011 UDPv4 link remote: [AF_INET]192.168.0.101:1194 Tue May 17 23:27:09 2011 TLS: Initial packet from [AF_INET]192.168.0.101:1194, sid=8e8bdc33 f4275407 Tue May 17 23:27:09 2011 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:09 2011 VERIFY OK: nsCertType=SERVER Tue May 17 23:27:09 2011 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=vpnCh8TestServer/name=lurscher/[email protected] Tue May 17 23:27:09 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:09 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:09 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:09 2011 [vpnCh8TestServer] Peer Connection Initiated with [AF_INET]192.168.0.101:1194 Tue May 17 23:27:10 2011 Initialization Sequence Completed the client status log: OpenVPN STATISTICS Updated,Tue May 17 23:30:09 2011 TUN/TAP read bytes,0 TUN/TAP write bytes,0 TCP/UDP read bytes,5604 TCP/UDP write bytes,4244 Auth read bytes,0 pre-compress bytes,0 post-compress bytes,0 pre-decompress bytes,0 post-decompress bytes,0 END and the server log says: Tue May 17 23:18:25 2011 OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 Tue May 17 23:18:25 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue May 17 23:18:25 2011 WARNING: --keepalive option is missing from server config Tue May 17 23:18:25 2011 NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet. Tue May 17 23:18:25 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Tue May 17 23:18:25 2011 Diffie-Hellman initialized with 1024 bit key Tue May 17 23:18:25 2011 /usr/bin/openssl-vulnkey -q -b 1024 -m <modulus omitted> Tue May 17 23:18:25 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:18:25 2011 ROUTE default_gateway=192.168.0.1 Tue May 17 23:18:25 2011 TUN/TAP device tun0 opened Tue May 17 23:18:25 2011 TUN/TAP TX queue length set to 100 Tue May 17 23:18:25 2011 /sbin/ifconfig tun0 10.8.117.1 pointopoint 10.8.117.2 mtu 1500 Tue May 17 23:18:25 2011 /sbin/route add -net 10.8.117.0 netmask 255.255.255.0 gw 10.8.117.2 Tue May 17 23:18:25 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:18:25 2011 Socket Buffers: R=[126976->131072] S=[126976->131072] Tue May 17 23:18:25 2011 UDPv4 link local (bound): [undef] Tue May 17 23:18:25 2011 UDPv4 link remote: [undef] Tue May 17 23:18:25 2011 MULTI: multi_init called, r=256 v=256 Tue May 17 23:18:25 2011 IFCONFIG POOL: base=10.8.117.4 size=62 Tue May 17 23:18:25 2011 IFCONFIG POOL LIST Tue May 17 23:18:25 2011 vpnCh8TestClient,10.8.117.4 Tue May 17 23:18:25 2011 Initialization Sequence Completed Tue May 17 23:27:22 2011 MULTI: multi_create_instance called Tue May 17 23:27:22 2011 192.168.0.104:1194 Re-using SSL/TLS context Tue May 17 23:27:22 2011 192.168.0.104:1194 LZO compression initialized Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 17 23:27:22 2011 192.168.0.104:1194 Local Options hash (VER=V4): '530fdded' Tue May 17 23:27:22 2011 192.168.0.104:1194 Expected Remote Options hash (VER=V4): '41690919' Tue May 17 23:27:22 2011 192.168.0.104:1194 TLS: Initial packet from [AF_INET]192.168.0.104:1194, sid=8972b565 79323f68 Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=1, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 VERIFY OK: depth=0, /C=CA/ST=Out/L=There/O=Ubuntu/OU=Home/CN=Ubuntu_CA/name=lurscher/[email protected] Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue May 17 23:27:22 2011 192.168.0.104:1194 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue May 17 23:27:22 2011 192.168.0.104:1194 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue May 17 23:27:22 2011 192.168.0.104:1194 [vpnCh8TestClient] Peer Connection Initiated with [AF_INET]192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: Learn: 10.8.117.6 -> vpnCh8TestClient/192.168.0.104:1194 Tue May 17 23:27:22 2011 vpnCh8TestClient/192.168.0.104:1194 MULTI: primary virtual IP for vpnCh8TestClient/192.168.0.104:1194: 10.8.117.6 finally, the server status log: OpenVPN CLIENT LIST Updated,Tue May 17 23:36:25 2011 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since vpnCh8TestClient,192.168.0.104:1194,4244,5604,Tue May 17 23:27:22 2011 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.117.6,vpnCh8TestClient,192.168.0.104:1194,Tue May 17 23:27:22 2011 GLOBAL STATS Max bcast/mcast queue length,0 END

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

• Centralized logging for JBoss / log4j? [closed]

  - by mfarver

  Does anyone have advice or a pointer to articles on how to centralize logs in JBoss? JBoss will log to syslog, which makes it easy, but doing so breaks multi line debug messages (and Jboss loves dropping exception stack traces in the logs). I can rsync the logs, but that isn't realtime. Log4j has appenders for TCP and multicast sockets, so it seems like something probably exists for streaming logs, but I haven't found a receiver for the data. Thanks

  Read the article

• Removing duplicate files, keeping only the newest file

  - by pinkie_d_pie_0228

  I'm trying to clean up a photo dump folder, in which several files are duplicated but with different filenames or lost in subfolders. I've looked at tools like rmlint, duff and fdupes, but I can't seem to find a way to have them keep only the file with the most recent timestamp. I suspect I have to postprocess the results, but I don't even know where to start to do this. Can anyone guide me on how to get the duplicate files list and delete everything but the newest file?

  Read the article

• Add text to the beginning of every other line in notepad+-+

  - by Paul M

  Please advise how to add text to the beginning of every other line in notepad+-+ Actually, what I want to do is... Add (title) to the beginning of lines 1, 3, 5, etc...(hundreds of lines in a notepad++ file) Add (/title) to the end of lines 1, 3, 5, etc... Then... Add (link) to the beginning of even number lines (e.g. lines 2, 4, 6, 8, etc...) Add (/link) to the end of even number lines (e.g. lines 2, 4, 6, 8, etc...) Thanks

  Read the article

• why did preview stop working from firefox?

  - by kloop

  I just installed adobe reader, and now when I click on a PDF in the browser, it is not opened in preview. Adobe doesn't work either, and I am stuck without having the PDF viewed at all. I right clicked on a PDF, and preview is still my default viewer. So this: http://www.ehow.com/how_6764524_make-preview-default-pdf-viewer.html is not helping. Any ideas? I want to be able to use Preview in Firefox.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >