Daily Archives

Articles indexed Wednesday December 19 2012

Page 1/17 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Nginx + PHP - No input file specified

  - by F21

  I am running Ubuntu Desktop 12.04 with nginx 1.2.6. PHP is PHP-FPM 5.4.9. This is the relevant part of my nginx.conf: http { include mime.types; default_type application/octet-stream; sendfile on; root /www keepalive_timeout 65; server { server_name testapp.com; root /www/app/www/; index index.php index.html index.htm; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { listen 80 default_server; index index.html index.php; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } In my hosts file, I redirect 2 domains: testapp.com and test.com to 127.0.0.1. My web files are all stored in /www. From the above settings, if I visit test.com/phpinfo.php and test.com/app/www, everything works as expected and I get output from PHP. However, if I visit testapp.com, I get the dreaded No input file specified. error. So, at this point, I pull out the log files and have a look: 2012/12/19 16:00:53 [error] 12183#0: *17 FastCGI sent in stderr: "Unable to open primary script: /www/app/www/index.php (No such file or directory)" while reading response header from upstream, client: 127.0.0.1, server: testapp.com, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "testapp.com" This baffles me because I have checked again and again and /www/app/www/index.php definitely exists! This is also validated by the fact that test.com/app/www/index.php works which means the file exists and the permissions are correct. Why is this happening and what are the root causes of things breaking for just the testapp.com v-host?

  Read the article

• Server 2012 AD-DS Setup Fails (Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks not found)

  - by Daniel Steiner

  Good Morning everyone, I am currently trying to promote my 2012 Server to a Domain Controller but when I am at the first step in the setup I get the Error Message (German, Original Message): [Bereitstellungskonfiguration] Fehler bei der Bestimmung, ob der Zielserver bereits ein Domänencontroller ist: Der Typ [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] wurde nicht gefunden: Vergewissern Sie sich, dass die Assembly, die diesen Typ enthält, geladen ist. (Translated to English): Error while determining, if the Targetserver already is a Domain Controller: The Type [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] was not found: Make sure, that the assembly, that contains this type, is loaded. Thus I can neither Configure the AD-DS nor deinstall them via Server Manager. Any Help how to fix that problem would be greatly appricieated.

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

  - by Tejaswi Rana

  I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

  Read the article

• High Server Load cannot figure out why

  - by Tim Bolton

  My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

  Read the article

• Hotfix entries in event log

  - by Marco Shaw

  Server 2008/2008 R2 I'm trying to remotely monitor these servers to watch the progress of hotfixes being installed. I was able to find this in Server 2003/2003 R2: -Log: System -Source: NtServicePack It seems the above event is written when every hotfix is installed. I can't seem to find a comparable entry in Server 2008/2008 R2 though. Is there anything similar that I can easily monitor for remotely?

  Read the article

• Opscode Chef nginx compile from source issue reports successful run but does nothing

  - by v_abhi_v

  I am trying to install nginx from source in Opscode Chef and its bit weird, it runs complaining nothing but does not install it either. This is how my role attributes look like looks like "nginx":{ "default_site_enabled":false, "version":"1.2.6", "init_style":"init", "install_method":"source", "configure_flags":[ "--without-http_access_module", "--without-http_auth_basic_module", "--without-http_autoindex_module", "--without-http_browser_module", "--without-http_charset_module", "--without-http_fastcgi_module", "--without-http_memcached_module", "--without-http_referer_module", "--without-http_scgi_module", "--without-http_split_clients_module" ], "log_dir":"/var/log/nginx", "binary":"/opt/nginx/sbin/nginx", "source":{ "prefix":"/opt/nginx/dist", "modules":["http_ssl_module", "http_gzip_static_module" ] } }, The chef log shows: [2012-12-19T02:37:44+00:00] INFO: Processing bash[compile_nginx_source] action run (nginx::source line 82) [2012-12-19T02:37:45+00:00] INFO: bash[compile_nginx_source] ran successfully I am clueless on what's going on :(

  Read the article

• mongoexport csv output array values

  - by 9point6

  I'm using mongoexport to export some collections into CSV files, however when I try to target fields which are members of an array I cannot get it to export correctly. command I'm using: mongoexport -d db -c collection -fieldFile fields.txt --csv > out.csv and the contents of fields.txt is similar to id name address[0].line1 address[0].line2 address[0].city address[0].country address[0].postcode where the BSON data would be: { "id": 1, "name": "example", "address": [ { "line1": "flat 123", "line2": "123 Fake St.", "city": "London", "country": "England", "postcode": "N1 1AA" } ] } what is the correct syntax for exporting the contents of an array?

  Read the article

• multiple puppet masters

  - by Oli

  I would like to set up an additional puppet master but have the CA server handled by only 1 puppet master. I have set this up as per the documentation here: http://docs.puppetlabs.com/guides/scaling_multiple_masters.html I have configured my second puppet master as follows: [main] ... ca = false ca_server = puppet-master1.test.net I am using passenger so I am a bit confused how the virtual-host.conf file should look for my second puppet-master2.test.net. Here is mine (updated as per Shane Maddens answer): LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby Listen 8140 <VirtualHost *:8140> ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 SSLEngine on SSLProtocol -ALL +SSLv3 +TLSv1 SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP SSLCertificateFile /var/lib/puppet/ssl/certs/puppet-master2.test.net.pem SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/puppet-master2.test.net.pem #SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem #SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem # If Apache complains about invalid signatures on the CRL, you can try disabling # CRL checking by commenting the next line, but this is not recommended. #SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem SSLVerifyClient optional SSLVerifyDepth 1 # The `ExportCertData` option is needed for agent certificate expiration warnings SSLOptions +StdEnvVars +ExportCertData # This header needs to be set if using a loadbalancer or proxy RequestHeader unset X-Forwarded-For RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> I have commented out the #SSLCertificateChainFile, #SSLCACertificateFile & #SSLCARevocationFile - this is not a CA server so not sure I need this. How would I get passenger to work with these? I would like to use ProxyPassMatch which I have configured as per the documentation. I don't want to specify a ca server in every puppet.conf file. I am getting this error when trying to get create a cert from a puppet client pointing to the second puppet master server (puppet-master2.test.net): [root@puppet-client2 ~]# puppet agent --test Error: Could not request certificate: Could not intern from s: nested asn1 error Exiting; failed to retrieve certificate and waitforcert is disabled On the puppet client I have this [main] server = puppet-master2.test.net What have I missed? -- update Here is a new virtual host file on my secondary puppet master. Is this correct? I have SSL turned off? LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18 PassengerRuby /usr/bin/ruby # you probably want to tune these settings PassengerHighPerformance on PassengerMaxPoolSize 12 PassengerPoolIdleTime 1500 # PassengerMaxRequests 1000 PassengerStatThrottleRate 120 RackAutoDetect Off RailsAutoDetect Off Listen 8140 <VirtualHost *:8140> SSLEngine off ProxyPassMatch ^/([^/]+/certificate.*)$ https://puppet-master1.test.net:8140/$1 # Obtain Authentication Information from Client Request Headers SetEnvIf X-Client-Verify "(.*)" SSL_CLIENT_VERIFY=$1 SetEnvIf X-SSL-Client-DN "(.*)" SSL_CLIENT_S_DN=$1 DocumentRoot /etc/puppet/rack/public/ RackBaseURI / <Directory /etc/puppet/rack/> Options None AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Cheers, Oli

  Read the article

• Url rewriting stops working after changing default port on iis7

  - by Somesh

  I have migrated the IIS6 webserver 2003 websites to IIS7 webserver 2008 using msdeploy tool. Application pool setting are changed with "Enable 32-bit Applications=true", "Managed_Pipeline_Mode=Classic","Identity=NetworkService" Framework=v1.1/2.0. All the websites are working fine on default port along with url rewriting migrated from iis6. When I start the webserver on port other than default port by changing bindings, url rewriting stops workings and get 404 error in logs. I think I don't have to change the handler mapping cause I am running it in classic mode. How can I troubleshoot this?

  Read the article

• Good reasons to keep 32-bit Microsoft Windows desktop OSes

  - by Mark Henderson

  Server software has been 64-bit only for a while now (Since Server 2008 R2 for Windows, even earlier for Exchange and Sharepoint) and even Ubuntu are pushing you away from 32-bit versions for their server OSes. But is there any good, quantifiable reason to keep a 32-bit desktop operating system maintained? We're preparing our Windows 8 images for the (unfortunate?) few that will be early adopters. The majority of our desktop computers have 4gb or less of RAM, but I would love to not have to bother supporting a 32-bit flavoured operating system any more. Any reason why I should?

  Read the article

• MMC crashes on Windows Server 2008 x64 - Exchange console, event viewer

  - by David M Williams

  Help! I don't know what happened; this server has been very reliable but suddenly began having problems with a particular .NET 2.0 web site simply hanging - it wouldn't load at all. However, another ASP.NET site was still fine. Reinstalling the site didn't fix it, nor did deleting and re-creating the application within IIS. Trying the event viewer was met with a horrifying "Microsoft Management Console has stopped working". Some Googling led me to believe the .NET framework was the problem. I found a tool called the .NET cleanup tool - http://blogs.msdn.com/astebner/pages/8904493.aspx - which cleaned out .NET entirely. I reinstalled .NET 1.1 and 3.5 (which installed 2.0 and 3.0 as well). Using the .NET verification tool - http://blogs.msdn.com/astebner/pages/8999004.aspx - I believe these have all installed ok. However, my server is in worse shape now. The Exchange 2010 Management Console crashes with an MMC error and now my other (previously reliable) .NET web app now hangs on loading too. I thought I should use Computer Management to remove and re-add the application and web server roles but sure enough, MMC crashes. If anyone can help I will be extremely grateful. Thank you !

  Read the article

• What is the best powershell script to restore an SQL Database?

  - by EtienneT

  To restore an SQL Server 2008 database, I would lile to be able to just do something like this in powershell: ./restore.ps1 DatabaseName.bak Then the powershell script would by convention restore it to a database with name "DatabaseName". It would disconnect any user connected to this database so that it can restore the DB. It would store the mdf and ldf in the default location. This would mainly be while developing on my personal machine. Just a quick way to restore a DB. Anyone has such a script? Thanks

  Read the article

• Disabling RAID feature on HP Smart Array P400

  - by Arie K

  I'm planning to use ZFS on my system (HP ML370 G5, Smart Array P400, 8 SAS disk). I want ZFS to manage all disks individually, so it can utilize better scheduling (i.e. I want to use software RAID feature in ZFS). The problem is, I can't find a way to disable RAID feature on the RAID controller. Right now, the controller aggregates all of the disks into one big RAID-5 volume. So ZFS can't see individual disk. Is there any way to acomplish this setup?

  Read the article

• How to connect with a vpn connection without any prompt in windows 8

  - by saber tabatabaee yazdi

  In windows 7 , we can define a hotkey for connect to internet via VPN connection immediately without any prompt, through these Steps: Create shortcut for VPN connection for example in Desktop. Define a hotkey for that shortcut In VPN properties options TAB dialing options uncheck this checkbox : "prompt for name and password..." This checkbox not exist in windows 8 so we cant define in Windows 8 like that.

  Read the article

• Win 7 accessing large files uses 100% RAM

  - by user181276

  Running Win 7 64-bit SP1 with 8 GB RAM. I first noticed this problem when using the GUI to copy some large (5+ GB) files from one disk to another. What happens is the physical memory in use rises quite quickly to 100% and the system comes to a crawl. If I just start to access the file in a media player (it is a movie) the memory usage climbs up slowly but eventually reaches 100%. When copying the same files via XCOPY I do not have this problem. Using RAMMAP I see most of the memory usage is under "Mapped File" and is allocated under the "Active" column. If I select "Empty System Working Set" the RAM usage drops back down but then starts to climb back up. Any ideas on what I can check/test to eliminate this issue?

  Read the article

• How can I bind mount a directory with a space in it?

  - by chris

  I have a drive mounted at /media/ that contains a directory with a space in the name - let's call it "My Stuff". I would like to bind mount it to "My Stuff" in my home directory. I tried the following in fstab, but all attempts to mount resulted in a syntax error: /media/My\ Stuff /home/me/My\ Stuff none bind "/media/My\ Stuff" "/home/me/My\ Stuff" none bind "/media/My Stuff" "/home/me/My Stuff" none bind Is there a way to do this?

  Read the article

• LibreOffice Calc/Writer: How to get the dates for specifc weekdays per month?

  - by Phin

  I'm stuck with a problem in LibreOffice Calc or Writer: I try to get a table of dates for every monday, wednesday and friday per month, something that I can load every new month wich sets the dates automatically so I just have to print the page on paper. :) In Writer the fieldcommand for date can't obviosly do the job (it only can be set to a fix date, the todays date or +offset as far as I can see). In Calc I tried it with the autofill but that obviosly works for the first 3 days only. I might add that I'm lost with Excel/calc formulars... Any help?

  Read the article

• Automatically install driver on headless WHSv1 system

  - by Dan Neely

  I have one of the HP Mediasmart Windows Home Server v1 boxes. It's network port appears to have died a few days ago but the system is not giving any other sign of failure: No activity lights activate on either side of the cable when connected to my gigabit switch; when connected to one of my routers 100 megabit ports the lights turn on but it remains unreachable over the network and my router never lists it as among DHCP clients. I bought a USB-ethernet adapter to temporarily get it back online; but the adapter needs a driver to work which I can't install because the system is headless by design (no video out, no PCI/PCIe slots) with admin access only available via the WHS client or remote desktop. Both of those options require network connectivity and are consequently unavailable. I tried copying the drivers to a flash drive; but Windows either didn't look there or none of the drivers provided were suitable (Win8, Win7, or combined XP and Vista). I've been told that a USB WiFi adapter would have the same driver problem.

  Read the article

• How can I repair my USB drive?

  - by yurko

  USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

  Read the article

• How do I setup a cloud server to share and sync files on ESXi hosted environment?

  - by Manoj Agarwal

  I want to setup my private cloud network for my company for syncing and sharing files. Instead of using existing players like dropbox, google drive, amazon etc. I want to setup my own cloud infrastructure. The requirement is to easily share private data internally within the organization. I already have an ESXi based cloud environment, running several virtual machines in it. Will it be feasible and achievable?

  Read the article

• Enabling AHCI in BIOS for SSD

  - by Robert

  I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

  Read the article

• How to reset MacOsX while keeping BootCamp?

  - by ss814

  I have MacOsX 10.8.2 installed on my MacBook Pro and Windows 8 licenced on a BootCamp partition. I have messed up my MacOsx partition (problems while programming, .h files not found, old applications removed that still appears) and I wanna start back from a clean OS. Is there a Way to reset my partition (or reinstall, obviously) keeping my BootCamp partition safe ? I know I could use my recovery partition but I do not know if it won't delete my Windows and it no longer appears in disk utility. As I found no answers in the Internet, does someone how how to do that ? Thanks in advance.

  Read the article

• Need to find jni.h in cmake on Mac

  - by Ilan Tal

  I am trying to make VTK compile on a Mac Air machine. I am using CMake 2.8-9, using Xcode4 as the generator. If I press the Configure button with VTK_WRAP_JAVA not checked, it will go with no errors. However I definitely need to use the wrap java since my main program is in Java and I need to get to VTK which is c++. As soon as I check the wrap Java, I get Could NOT find JNI. It apparently is looking for jni.h which in Linux there is no problem finding, but in the Mac it apparently can't find it. I did a locate jni.h and got new-host-2:~ geraldkolodny$ locate jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.8.sdk/System/Library/Frameworks/JavaVM.framework/Versions/A/Headers/jni.h /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home/include/jni.h I tried to manually put into JAVA_INCLUDE_PATH2 either entry 2 or 3 (without the jni.h at the end), but it still can't find jni.h. Xcode used to have a template for jni but that is now gone in the latest version. I am fresh out of ideas on how to solve this problem. I'd be grateful for any suggestions. Thanks, Ilan

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >