Daily Archives

Articles indexed Tuesday July 2 2013

Page 1/19 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • 403 forbidden .htaccess issue

    - by Gkhan14
    I have this .htaccess file in one directory on my site: <limit GET> order deny,allow deny from all allow from 123.456.789 </limit> ErrorDocument 403 403.html It blocks everyone except for one IP. However, when an invalid IP visits, it does not show the 403.html file, but it just shows the text "403.html" on the page. When I try to directly visit the 403.html page on the directory, it gets the same message too.

    Read the article

  • What's the right way to create a Ubuntu user whose home directory is /var/www/SITE?

    - by Leonnears
    First of, I need to state I'm a complete ignorant when it comes to server administration on Ubuntu, and I'm doing what I can. I have been trying to do this for hours with no luck. Basically, I want to create a Ubuntu user whose home directory is /var/www/SITE, and prefered it is chroot'd to it. The chroot part is not so important right now, as first I prefer to make anything work. The user should be able to upload files here and the webserver (www-data user?) should be able to pick them up with no problem. I was able to create the user and give it the home directory /var/www/SITE. (the user is "anders"). I gave him a password, and "anders" can connect to FTP just fine and upload files. But here's where things don't work: While my user can upload files to that /var/www/SITE directory, when I access the webpage on my browser I get a Forbidden error. Note that anders is also a member of the www-data group. I can fix this by running sudo chmod g+s /var/www/SITE/* anders -R but this is of course not ideal. Ideally the files should "work" as soon as I upload them. What's the right way to fix this? If it matters (don't think so), I'm editing my files in Coda 2 and anders is the user for it.

    Read the article

  • SonicOS Enhanced 5.8.1.2 L2TP VPN Authentication Failed

    - by Dean A. Vassallo
    I have a SonicWall TZ 215 running SonicOS Enhanced 5.8.1.2-6o. I have configured the L2TP VPN using the default crypto suite ESP: 3DES/HMAC SHA1 (IKE). Proposals are as such: IKE (Phase 1) Proposal DH Group: Group 2 Encryption: 3DES Authentication: SHA1 Life Time (seconds): 28800 Ipsec (Phase 2) Proposal Protocol: ESP Encryption: 3DES Authentication: SHA1 Enable Perfect Forward Secrecy DISABLED Life Time (seconds): 28800 When attempting to connect via my Mac OS X client I get an authentication error. It appears to pass the pre-authentication but fails to complete. I am at a complete loss. I reconfigured from scratch multiple times...used simple usernames and passwords to verify this wasn't a miskeyed password issue. I have Here are the logs (noted IP has been removed for privacy): 7/1/13 8:19:05.174 PM pppd[1268]: setup_security_context server port: 0x1503 7/1/13 8:19:05.190 PM pppd[1268]: publish_entry SCDSet() failed: Success! 7/1/13 8:19:05.191 PM pppd[1268]: publish_entry SCDSet() failed: Success! 7/1/13 8:19:05.191 PM pppd[1268]: pppd 2.4.2 (Apple version 727.1.1) started by dean, uid 501 7/1/13 8:19:05.192 PM pppd[1268]: L2TP connecting to server ‘0.0.0.0’ (0.0.0.0)... 7/1/13 8:19:05.193 PM pppd[1268]: IPSec connection started 7/1/13 8:19:05.208 PM racoon[1269]: accepted connection on vpn control socket. 7/1/13 8:19:05.209 PM racoon[1269]: Connecting. 7/1/13 8:19:05.209 PM racoon[1269]: IPSec Phase 1 started (Initiated by me). 7/1/13 8:19:05.209 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). 7/1/13 8:19:05.209 PM racoon[1269]: >>>>> phase change status = Phase 1 started by us 7/1/13 8:19:05.231 PM racoon[1269]: >>>>> phase change status = Phase 1 started by peer 7/1/13 8:19:05.231 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 2). 7/1/13 8:19:05.234 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). 7/1/13 8:19:05.293 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 4). 7/1/13 8:19:05.295 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). 7/1/13 8:19:05.315 PM racoon[1269]: IKEv1 Phase 1 AUTH: success. (Initiator, Main-Mode Message 6). 7/1/13 8:19:05.315 PM racoon[1269]: IKE Packet: receive success. (Initiator, Main-Mode message 6). 7/1/13 8:19:05.315 PM racoon[1269]: IKEv1 Phase 1 Initiator: success. (Initiator, Main-Mode). 7/1/13 8:19:05.315 PM racoon[1269]: IPSec Phase 1 established (Initiated by me). 7/1/13 8:19:06.307 PM racoon[1269]: IPSec Phase 2 started (Initiated by me). 7/1/13 8:19:06.307 PM racoon[1269]: >>>>> phase change status = Phase 2 started 7/1/13 8:19:06.308 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). 7/1/13 8:19:06.332 PM racoon[1269]: attribute has been modified. 7/1/13 8:19:06.332 PM racoon[1269]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). 7/1/13 8:19:06.332 PM racoon[1269]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). 7/1/13 8:19:06.333 PM racoon[1269]: IKEv1 Phase 2 Initiator: success. (Initiator, Quick-Mode). 7/1/13 8:19:06.333 PM racoon[1269]: IPSec Phase 2 established (Initiated by me). 7/1/13 8:19:06.333 PM racoon[1269]: >>>>> phase change status = Phase 2 established 7/1/13 8:19:06.333 PM pppd[1268]: IPSec connection established 7/1/13 8:19:07.145 PM pppd[1268]: L2TP connection established. 7/1/13 8:19:07.000 PM kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 3) 7/1/13 8:19:07.146 PM pppd[1268]: Connect: ppp0 <--> socket[34:18] 7/1/13 8:19:08.709 PM pppd[1268]: MS-CHAPv2 mutual authentication failed. 7/1/13 8:19:08.710 PM pppd[1268]: Connection terminated. 7/1/13 8:19:08.710 PM pppd[1268]: L2TP disconnecting... 7/1/13 8:19:08.711 PM pppd[1268]: L2TP disconnected 7/1/13 8:19:08.711 PM racoon[1269]: IPSec disconnecting from server 0.0.0.0 7/1/13 8:19:08.711 PM racoon[1269]: IKE Packet: transmit success. (Information message). 7/1/13 8:19:08.712 PM racoon[1269]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). 7/1/13 8:19:08.712 PM racoon[1269]: IKE Packet: transmit success. (Information message). 7/1/13 8:19:08.712 PM racoon[1269]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). 7/1/13 8:19:08.713 PM racoon[1269]: glob found no matches for path "/var/run/racoon/*.conf" 7/1/13 8:19:08.714 PM racoon[1269]: pfkey DELETE failed: No such file or directory

    Read the article

  • Has anyone used tools like (Chef, Salt, Puppet, CfEngine) to configure a 2008 Win Server with Sql?

    - by Development 4.0
    I have been looking into tools to automate the creation of servers. For two different reasons: Production Development machines I love the idea of the immutable server. I have seen the tools demoed and used successfully on *nix boxes running Rails or Lamp etc. Has anyone found a good way to do this in the Microsoft stack? I would like to get in on the fun and create scripts that will install Windows, patch it according to specification, deploy Sql Server create scripts to build out a database and just for fun deploy SharePoint and configure it, and then deploy a SharePoint solution to it. I can get part of the way, install Windows manually, install Sql Server manually, use Powershell to do all the configuration and setup. Install SharePoint and configure part of it, then powershell for the rest of the configuration and deploying a solution. I would love to have the ability to run one script though, or at least one unified process. I can, and have mostly used VM template images and then instantiated them, but the creation of the template is usually a manual step.

    Read the article

  • How can I specify nameserver's port number in osx? [duplicate]

    - by Cofyc
    This question already has an answer here: How is DNS lookup configured for OSX Mountain Lion? 2 answers In resolver manual, it said: The address may optionally have a trailing dot followed by a port number. For example, 10.0.0.17.55 specifies that the nameserver at 10.0.0.17 uses port 55. But it doesn't work, in /etc/resolv.conf or files under /etc/resolver/. 208.67.222.222.5353 Can I specify non-default port number for nameserver in osx? Update: osx don't use /etc/resolve.conf, but use files under /etc/resolver/. I have wrote a file dev with content '127.0.0.1' to route all dns queries for *.dev domains to a local dns server (127.0.0.). But I cannot specify dns server's port here. (It uses 53 anyway) Maybe there is no way to specify port number under osx?

    Read the article

  • Automatically Applying Security Updates for AWS Elastic Beanstalk

    - by Eric Anderson
    I've been a fan of Heroku since it's earliest days. But I like the fact that AWS Elastic Beanstalk gives you more control over the characteristics of the instances. One thing I love about Heroku is the fact that I can deploy an app and not worry about managing it. I am assuming Heroku is ensuring all OS security updates are timely applied. I just need to make sure my app is secure. My initial research on Beanstalk shows that although it builds and configures the instances for you, after that it moves to a more manual management process. Security updates won't automatically be applied to the instances. It seems there are two areas of concerns: New AMI releases - As new AMI releases hit it seems we would want to run the latest (presumably most secure). But my research seems to indicate you need to manually launch a new setup to see the latest AMI version and then create a new environment to use that new version. Is there a better automated way of rotating your instances into new AMI releases? In between releases there will be security updates released for packages. Seems we want to upgrade those as well. My research seems to indicate people install commands to occasionally run a yum update. But since new instances are created/destroyed based on usage it seems that the new instances would not always have the updates (i.e. the time between the instance creation and the first yum update). So occasionally you will have instances that aren't patched. And you are also going to have instances constantly patching themselves until the new AMI release is applied. My other concern is that perhaps these security updates haven't gone through Amazon's own review (like the AMI releases do) and it might break my app to automatically update them. I know Dreamhost once had a 12 hour outage because they were applying debian updates completely automatically without any review. I want to make sure the same thing doesn't happen to me. So my question is does Amazon provide a way to offer fully managed PaaS like Heroku? Or is AWS Elastic Beanstalk really more of just a install script and after that you are on your own (other than the monitoring and deployment tools they provide)?

    Read the article

  • setting up subdomain wildcard: configured A record, VirtualHost... still does not work

    - by user80314
    Running Apache on CentOS, trying to setup wildcard subdomains, basically I want .mydomain.com to point to mydomain.com With cPanel I added *.mydomain.com With WHM I made sure that A record is pointing to the right IP. I set my A record: * 14400 IN X.x.x.x My httpd.conf: ServerName _wildcard_.mydomain.com ServerAlias *.mydomain.com DocumentRoot /home/mydomain/public_html ServerAdmin [email protected] UseCanonicalName Off ## User userdomain# Needed for Cpanel::ApacheConf UserDir enabled userdomain <IfModule mod_suphp.c> suPHP_UserGroup userdomain userdomain </IfModule> <IfModule !mod_disable_suexec.c> <IfModule !mod_ruid2.c> SuexecUserGroup usergrdomain userdomain </IfModule> </IfModule> <IfModule mod_ruid2.c> RUidGid userdomain userdomain </IfModule> ScriptAlias /cgi-bin/ /home/mydomain/public_html/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/mydomain/wildcard_safe.mydomain.com/*.conf" I have my VirtualHost in httpd.conf set to point to domain root. Restarted Apache, server, dns, still nothing. I have spent hours researching this, followed instructions, set everything correctly. What am I missing?

    Read the article

  • How to config Amazon Route53 working without www in sub-domain

    - by romuloigor
    edit: Amazon now supports this. http://aws.typepad.com/aws/2012/12/root-domain-website-hosting-for-amazon-s3.html I have my domain config in Route53 at Amazon AWS exec ping command in my domain without www $ ping gabster.com.br ping: cannot resolve gabster.com.br: Unknown host exec ping command in my domain with www $ ping www.gabster.com.br PING s3-website-sa-east-1.amazonaws.com (177.72.245.6): 56 data bytes 64 bytes from 177.72.245.6: icmp_seq=0 ttl=244 time=25.027 ms 64 bytes from 177.72.245.6: icmp_seq=1 ttl=244 time=25.238 ms 64 bytes from 177.72.245.6: icmp_seq=2 ttl=244 time=25.024 ms Route 53 - Create Record Set - Name: [ ].gabster.com.br Set CNAME value: www.gabster.com.br DISPLAY ERROR "RRSet of type CNAME with DNS name mydomin.com is not permitted at apex in zone mydomin.com"

    Read the article

  • Syntax Error when setting up Domain Alias

    - by Poundtrader
    I'm attempting to set up a domain alias via Pre VirtualHost Include and I'm recieving the following error: Error: An error occurred while running: /usr/local/apache/bin/httpd -DSSL -t -f /usr/local/apache/conf/httpd.conf Exit signal was: 0 Exit value was: 1 Output was: --- Syntax error on line 15 of /usr/local/apache/conf/includes/pre_virtualhost_global.conf: CustomLog takes two or three arguments, a file name, a custom log format string or format name, and an optional "env=" clause (see docs) --- Basically I have two domains, the main domain has an opencart installation within a directory (/buy) and I'm attempting to use the multi-store function which allows you to administer multiple stores on multiple domains via the one opencart dashboard. My issue is that I have the opencart installations within the /buy directory so I have been given the following code which should allow me to use this functionality over the multiple cPanel accounts within the same VPS. <VirtualHost 87.117.239.29:80> ServerName newdomain.co.uk ServerAlias www.newdomain.co.uk Alias /buy /home/originaldomain/public_html/buy/ DocumentRoot /home/newdom/public_html ServerAdmin [email protected] ## User newdom # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup newdom newdom </IfModule> <IfModule mod_ruid2.c> RUidGid newdom newdom </IfModule> CustomLog /usr/local/apache/domlogs/newdomain.co.uk-bytes_log “%{%s}t %I .\n%{%s}t %O .” CustomLog /usr/local/apache/domlogs/newdomain.co.uk combined ScriptAlias /cgi-bin/ /home/newdom/public_html/cgi-bin/ </VirtualHost> Does anyone know how to get this code to work? Thanks,

    Read the article

  • VoIP Tunnel Implementation for SIP Client

    - by Mahendra
    I am planning to provide an option for tunneling in my SIP client. I have tried to search on web for open-source implementation of this, but couldn't find one. My questions are: 1) If I go writing down my own custom code for implementing the feature - What are the different parameters / cases that I should consider & what should be my approach to start it? 2) Is there any open source implementation for SIP Tunneling already available? Any inputs are appreciated. Thanks.

    Read the article

  • How to reset Administrator password Windows Server 2003 installed on Vmware?

    - by Cucumber
    I want to reset administrator password on Windows Server 2003. OS installed on VMware server VMware Server version 2.0.1. And problem is this: when i try to boot from live cd, after boot disk with Windows not detected. I tried to use Windows Admin Hack - Linux Boot; Hirens.BootCD.10.4; ophcrack-xp-livecd-2.3.1.iso None of these programs did not see the hard drive! Any ideas? Thank! ADD: I want to reset LOCAL admin password, not domain. And this computer are not domain controller.

    Read the article

  • Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

    - by Paul J. Warner
    I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

    Read the article

  • More RAM in motherboard than CPU can process

    - by Videographer Francisco Ferrer
    As I understand reading in the forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the procesor can handle?(aka:procesor Max Memory Size). Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thanks

    Read the article

  • Windows Media Center says "Searching for tuners" when I try to play live TV

    - by Louis
    After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

    Read the article

  • How to create multiple OS on same DVD [duplicate]

    - by learner
    This question already has an answer here: How to make a multiboot CD that will start a user-chosen ISO file 7 answers I searched this forum but there are only general answers which doesn't give me desired output. Here is what I want to do. I have (1). Windows 7 ISO (2). Windows 8.1 previews ISO and (3). Ubuntu 12.10 ISO files. Using which I want to create single bootable DVD, so that after creating DVD it should ask to choose to install between 3 OS. Is it possible? If so please help me.

    Read the article

  • How quickly toggle smart quotes in Word 2010?

    - by KnowItAllWannabe
    I'm working on a long technical document that contains numerous displays of computer code. In running text, I want my quotation marks to be curly, which means that Word's "smart quotes" autoformatting-as-I-type feature is one I want on. But in code displays, curly quotes are incorrect, so in these cases, I want smart-quotes-as-I-type disabled. Is there a fast way to toggle this setting? Or is there a way I can tie it to the paragraph style I'm in? (I use a distinct style for code displays.) Currently, to toggle the setting, I have to click FileOptionsProofingAutoCorrect Options..."Straight quotes" with "smart quotes"OKOK, which is seven mouse clicks. Toggling it back is another seven mouse clicks. Isn't there a faster way? A keyhboard shortcut to do the toggling or a toolbar button that would toggle it with a single click would be great. Having the setting depend on the paragraph style I was in would be even better.

    Read the article

  • Error 0x800f0922 installing .NET 3.5 on Windows 8

    - by Benjamin Nolan
    I'm trying to install .NET 3.5 on my Windows 8 box and it keeps throwing Error 0x800f0922 at me. From what I've read on answers.microsoft.com and StackOverflow I gather the easiest way to fix this is to perform a system refresh, however this will remove all software I've installed from discs. I've just moved house, so I'd rather not do that as I don't know where all the installation media actually are for a lot of my software, so if possible I'd prefer to track down where the problem is actually occurring. (Also, I have a LOT of software installed. It'd take me a long time to reinstall it all, and I unfortunately haven't got that time.) The on-demand error screen sends me to KB2734782 (can't link it as I'm <10 rep), which doesn't help much. When I run this DISM line from the StackOverflow post: Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:C:\Windows\WinSxS /LimitAccess I get the following output on the terminal: Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved. C:\Windows\system32>Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:C:\Windows\WinSxS /LimitAccess Deployment Image Servicing and Management tool Version: 6.2.9200.16384 Image Version: 6.2.9200.16384 Enabling feature(s) [==========================100.0%==========================] Error: 0x800f0922 DISM failed. No operation was performed. For more information, review the log file. The DISM log file can be found at C:\Windows\Logs\DISM\dism.log C:\Windows\system32> Incidentally, it jumps straight from 0 to 100% and then sits on that line for about 5 minutes before the error line occurs. dism.log contains the following lines around that time: (Link to full logs is at bottom of post) 2013-07-02 00:56:58, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager. 2013-07-02 00:56:58, Info DISM DISM Provider Store: PID=5768 TID=5780 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider 2013-07-02 00:56:58, Info DISM DISM Provider Store: PID=5768 TID=5780 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Processing the top level command token(enable-feature). - CPackageManagerCLIHandler::Private_ValidateCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered the option "featurename" with value "NetFX3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered an unknown option "featurename" with value "NetFX3" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered the option "source" with value "C:\Windows\WinSxS" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:58, Info DISM DISM Package Manager: PID=5768 TID=5780 Encountered an unknown option "source" with value "C:\Windows\WinSxS" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine 2013-07-02 00:56:59, Info DISM DISM Package Manager: PID=5768 TID=5780 Initiating Changes on Package with values: 5, 7 - CDISMPackage::Internal_ChangePackageState 2013-07-02 00:56:59, Info DISM DISM Package Manager: PID=5768 TID=5780 CBS session options=0x20100! - CDISMPackageManager::Internal_Finalize 2013-07-02 01:00:27, Info DISM DISM Package Manager: PID=5768 TID=2420 Error in operation: (null) (CBS HRESULT=0x800f0922) - CCbsConUIHandler::Error 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed processing package changes with session options - CDISMPackageManager::ProcessChangesWithOptions(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed ProcessChanges. - CPackageManagerCLIHandler::Private_ProcessFeatureChange(hr:0x800f0922) 2013-07-02 01:00:27, Error DISM DISM Package Manager: PID=5768 TID=5780 Failed while processing command enable-feature. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x800f0922) 2013-07-02 01:00:27, Info DISM DISM Package Manager: PID=5768 TID=5780 Further logs for online package and feature related operations can be found at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine 2013-07-02 01:00:27, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=800F0922 cbs.log has the following chunks around then which could be relevant: 2013-07-02 00:55:06, Info CBS Exec: This is a PSF Package. Job has been saved and we are returning to client. 2013-07-02 00:55:06, Info CSI 0000042d@2013/7/1:23:55:06.203 CSI Transaction @0xe2f5e59500 destroyed 2013-07-02 00:55:06, Info CBS Exec: DPX job state saved for one or more packages, aborting the staging and install of execution. 2013-07-02 00:55:06, Info CSI 0000042e@2013/7/1:23:55:06.207 CSI Transaction @0xe2f5e58480 destroyed 2013-07-02 00:55:06, Info CBS Perf: Stage chain complete. 2013-07-02 00:55:06, Info CBS Failed to stage execution chain. [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS Failed to process single phase execution. [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS WER: Failure is not worth reporting [HRESULT = 0x800f0816 - CBS_E_DPX_JOB_STATE_SAVED] 2013-07-02 00:55:06, Info CBS Reboot mark cleared and further down: 2013-07-02 00:59:19, Info CSI 000004e6 Begin executing advanced installer phase 38 (0x00000026) index 253 (0x00000000000000fd) (sequence 289) Old component: [l:0]"" New component: [ml:306{153},l:304{152}]"NetFx35CDF-CDF_GenericCommands, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=x86, versionScope=NonSxS" Install mode: install Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c} Installer name: [15]"Generic Command" 2013-07-02 00:59:19, Info CSI 000004e7 Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:19fc6600b776ce01c91f0000fc07a816} pathid: {l:16 b:19fc6600b776ce01ca1f0000fc07a816} path: [l:214{107}]"\SystemRoot\WinSxS\x86_netfx35cdf-cdf_genericcommands_31bf3856ad364e35_6.2.9200.16384_none_0cec490be12fb858" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:19, Info CSI 000004e8 Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:27236700b776ce01cb1f0000fc07a816} pathid: {l:16 b:27236700b776ce01cc1f0000fc07a816} path: [l:210{105}]"\SystemRoot\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:19, Info CSI 000004e9 Calling generic command executable (sequence 1): [122]"C:\Windows\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716\WFServicesReg.exe" CmdLine: [139]""C:\Windows\WinSxS\x86_netfx35cdf-csd_cdf_installer_31bf3856ad364e35_6.2.9200.16384_none_55072425fd5c3716\WFServicesReg.exe" /c /b /v /m /i" 2013-07-02 00:59:20, Info CSI 000004ea Performing 1 operations; 1 are not lock/unlock and follow: (0) LockComponentPath (10): flags: 0 comp: {l:16 b:bd790401b776ce01cd1f0000fc07a816} pathid: {l:16 b:bd790401b776ce01ce1f0000fc07a816} path: [l:234{117}]"\SystemRoot\WinSxS\x86_microsoft.windows.s..ation.badcomponents_31bf3856ad364e35_6.2.9200.16384_none_353ccb4c94858655" pid: 7fc starttime: 130171962799582915 (0x01ce76b5e2626ec3) 2013-07-02 00:59:20, Info CSI 000004eb Creating NT transaction (seq 27), objectname [6]"(null)" 2013-07-02 00:59:20, Info CSI 000004ec Created NT transaction (seq 27) result 0x00000000, handle @0x24b8 2013-07-02 00:59:20, Info CSI 000004ed@2013/7/1:23:59:20.933 Beginning NT transaction commit... 2013-07-02 00:59:22, Info CSI 000004ee@2013/7/1:23:59:22.065 CSI perf trace: CSIPERF:TXCOMMIT;1387723 2013-07-02 00:59:22, Error CSI 000004ef (F) Done with generic command 1; CreateProcess returned 0, CPAW returned S_OK Process exit code 255 (0x000000ff) resulted in success? FALSE Process output: [l:28479 [4096]"DDSet_Entry: WFServicesReg.exe DDSet_Status: CFxInstaller::CopyConfigFilesToTemp is64bit=0 DDSet_Status: CFileHelper::CopyConfigFilesToTempLocation DDSet_Status: CFxInstaller::SetupBaseComponents isInstall=1 DDSet_Status: CFxInstaller::SetupBaseComponents Calling SetupExtensions. isInstall=1 (0x000000FF -- The extended attributes are inconsistent. ??) And a bit further down: 2013-07-02 00:59:22, Error [0x018007] CSI 000004f0 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable (2)[gle=0x80004005] [...snip...] 2013-07-02 00:59:22, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND] 2013-07-02 00:59:28, Info CSI 000004f1@2013/7/1:23:59:28.467 CSI Advanced installer perf trace: CSIPERF:AIDONE;{81a34a10-4256-436a-89d6-794b97ca407c};NetFx35CDF-CDF_GenericCommands, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral;10609242us 2013-07-02 00:59:28, Info CSI 000004f2 End executing advanced installer (sequence 289) Completion status: HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) [...snip...] 2013-07-02 01:00:26, Info CBS Exec: Cancelled pending transactions after rollback. [HRESULT = 0x00000000 - S_OK] 2013-07-02 01:00:26, Error CBS Exec: An error occurred while committing the transaction, the transaction could not be rolled back. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED] The full DISM and CBS logs are at http://ben.mu/files/dotnet35_dism_cbs.zip as the CBS log is nearly 167MB uncompressed. o.o dism.log gives the timeframe of where its errors occur--00:56:20ish to 01:00:22. Does anyone have any ideas what's actually causing the installation to fail, and if so how I can fix it? Please don't just say "Refresh the OS". :)

    Read the article

  • Search files for text matching format of a Unix directory

    - by BrandonKowalski
    I am attempting to search through all the files in a directory for text matching the pattern of any arbitrary directory. The output of this I hope to use to make a list of all directories referenced in the files (this part I think I can figure out on my own). I have looked at various regex resources and made my own expression that seems to work in the browser based tool but not with grep in the command line. /\w+[(/\w+)]+ My understanding so far is the above expression will look for the beginning / of a directory then look for an indeterminate number of characters before looking for a repeating block of the same thing. Any guidance would be greatly appreciated.

    Read the article

  • NTFS write speed really slow (<15MB/s) on Ubuntu

    - by Zulakis
    When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

    Read the article

  • Virtual terminal with at least 16bit color?

    - by trusktr
    It's 2013 and there should be terminals with more than 256 colors by now (you'd think). Are there any terminals with more than 8bit colors (usually from 8 bit we jump to 16bit) to use with linux? Ideally, I'd like to have a linux terminal with 32bit colors for the foreground and background of each character. So, the functionality would be the same, with escape sequences, but just more of them (or something like that?).

    Read the article

  • Why does this monitor go to sleep but won't wake up, event though all related power options are turned off?

    - by VoidKing
    We have a machine, Windows 7 (64-bit) with ASUS motherboard, in our building that only sometimes seems to go to sleep, but won't wake up. The machine is still running but shaking the mouse or hitting keys on the keyboard won't wake it up. I have tried for days to isolate the problem, but every time we get to a "let's try this" scenario, it happens again, later. All power options related to display being off are set to never, except the simple, "turn display off after..." setting. That is, the hard drive is set to never turn off, and the computer is set to never sleep nor hibernate. All drivers seem to be up to date, but I am afraid I will hose the machine if I do a BIOS update (plus I figured that will probably have nothing to do with the issue and only make something else break). Wasn't sure if there was something obvious I was missing?

    Read the article

  • Why do I keep getting this Imagemagick error?

    - by Gkhan14
    I currently used this code for Imagemagick: convert "c:\users\****\My Documents\test.png" -transparent white test2.png However, I keep on getting two errors that look like this: convert.exe: unable to open image `c:\users\****\My': No such file or directory @ error/blob.c/OpenBlob/2641. convert.exe: no decode delegate for this image format `c:\users\****\My' @ error/constitute.c/ReadImage/550. I installed Imagemagick to my c:\ directory. What does this mean, and how can I fix it?

    Read the article

  • Coda 2 and SCP uploading files with the wrong permission

    - by Tom Black
    Currently I have a basic Ubuntu server running a website. The website is for a few students learning HTML/PHP and each student has their own account with a symbolic link to the shared website folder. Since the students are working on the website together, each user needs to be able to modify all the files (index.html for example). So I created a Webdev group containing all of the students with the default umask of 0002 set in their .bashrc (This allows newly created files to be 774). The shared folder is owned by the group Webdev with a chmod g+s so that new files/folders also belong to the group Webdev. The problem is that the students are using an IDE (Coda 2) and when they create a new file or folder using the IDE the file has the permissions of 644 on the server (not group writable). However when I make a new file through connecting with Cyberduck (SFTP client) the file permissions are 664 (as they should be). So I don't understand why Coda would be any different. However, after some trial and error I believe that Coda is first creating the file on local disk and then uploading that file to the server. On a mac by default a newly created file is 644. When the client uploads a file that's already 644 it stays 644 on the server side (umask is kind of useless in this situation). I've also tried creating ACL permissions for that folder but an uploaded file from my mac via SCP doesn't get the default ACL permissions. In Coda there is an option to change file permissions on a transfer. However this option seems to apply a chmod to all files being uploaded or saved. When one of students is modifying a file created by someone else when they try to upload the file or save it Coda tries to also do a chmod but fails because that user isn't the owner of the file. My current solution is using bindfs... I mount the shared web folder and bindfs sets permissions and group ownership of newly created files. However, bindfs seems to be a bit slow and I'm sure there is a better solution. Even if the students ditched Coda 2 and used Mac vim with scp the newly created files on the server would behave the same (644) which is default on the mac. Other options... 1) Either I teach the students to use (ssh/chmod) with their IDE to change their own file permissions when uploading. 2) I make all the students' Macs have the default umask of 0002 which would upload files with the right permissions. 3) Write a corn script to fix the file permissions every 5 to 15 minutes... (This option I think is the worst if students are working together at the same time). Is there any way that I could make all files that are uploaded via SCP have the default file permissions of 664 even though the uploaded file has a lower permission? (After hours of searching I don't think this is possible) I guess a corn script is my best option for novice users. How do web developers work together on larger sites? similar to this: http://serverfault.com/questions/283492/how-to-specify-file-permission-when-putting-a-file-using-openssh-sftp-command Also similar: http://serverfault.com/questions/395418/managing-linux-directory-permissions-sftp

    Read the article

  • scp No such file or directory

    - by Joe
    I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

    Read the article

  • Vim: Show the index of tabs in the tabline

    - by bitmask
    Lets say I opened file1.txt, file2.txt, file3a.txt and file3b.txt such that the tabline (the thing on the top) looks like this: file1.txt file2.txt 2 file3a.txt (Note how file3b.txt. is missing because it is shown in a split, in the same tab as file3a.txt) To move more quickly between tabs (with <Number>gt), I would like each tab to display its index, along the filename. Like so: 1:<file1.txt> 2:<file2.txt> 3:<2 file3a.txt> The formatting (the angle braces in particular) are optional; I just want the index to appear there (the 1:, 2: and so on). No clues on :h tab-page-commands or google whatsoever.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >