Daily Archives

Articles indexed Wednesday May 28 2014

Page 1/18 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Server have 2 psu, can i only turn on 1 psu, to reduce cost in colocation?

  - by Earl

  i just got a server & want to colocation it in datacenter server details : HP DL380, 2x intel Xeon (3,06GHz/533, 512KB L2 Cache), 8x Fans, Form Factor Rack (2U), 2x 400W Power Supplies, the server have 2 psu, can i only turn on 1 psu, to reduce cost in colocation? will the server still running good? the standart colocation packages in my city only give default power 400w, if need additional power 400w need additional cost about $40-60 again permonth please give suggestion from your experience

  Read the article

• Error while installing Xtrabackup

  - by Olin

  I'd like to install XtraBackup (rpm -i percona-xtrabackup-2.1.9-744.rhel6.x86_64.rpm). During the rpm install it told me that it misses a dependency. error: Failed dependencies: perl(DBD::mysql) is needed by percona-xtrabackup-2.1.9-744.rhel6.x86_64 perl(Time::HiRes) is needed by percona-xtrabackup-2.1.9-744.rhel6.x86_64 Then I run yum install perl-Time-HiRes, and yum install perl-DBD-MySQL. For install perl-TImes-Hires has successful but not for perl-DBD-MySQL. Error: file /usr/share/mysql/ukrainian/errmsg.sys from install of mysql-libs-5.1.73-3.el6_5.x86_64 conflicts with file from package MySQL-server-5.6.10-1.el6.x86_64. I also had try to install : yum install cpan cpan DBI cpan DBD::mysql But still get the same error. So I hope someone can explain me what the right fix is, to get XtraBackup running on MySQL.

  Read the article

• Ubuntu : apt-get command error

  - by Wibowo Margito

  I work with Ubuntu 10.04 everyday. Several days ago, when I release command sudo apt-get install .... it run very good, no error. I also able to open websites with my browser with no proxy. But, today, I got error. Every time I release the command, the connection redirected to an IP in my local network. I can see it in the terminal window. Several days ago I tried to connect to the internet throught the IP, by SSH tunneling. But I forget what I have done and there is no way home. This is the output in terminal : deo@deo-laptop:~$ sudo apt-get update [sudo] password for deo: Err http://cx.archive.ubuntu.com lucid Release.gpg [ Could not connect to 10.7.7.15:3128 (10.7.7.15). - connect (110: Connection timed out) Err http://cx.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Unable to connect to 10.7.7.15:3128: 10.7.7.15 is an adress in my local network. Somebody please help me :)

  Read the article

• How to solve SocketException: Permission denied: connect

  - by luxinxian

  I recently encountered a problem that is giving me a headache and I need help ... The System consists of two subsystems, called A and B, each running on a standalone Tomcat instance and currently running on the same machine. A invokes B's service via Spring httpInvoker (i.e. over HTTP). B system also invokes the other system's services via HTTP. Symptoms: the system starts to run and appears to work normally for around 10-15 days; the system will run for a period of time after an exception: org.springframework.remoting.RemoteAccessException: Could not access HTTP invoker remote service at [http://xxx.xxx.xxx.xxx/remoting/call]; The nested exception is java. net.SocketException: **Permission denied: connect** when the exception occurs, the system continues. This happens always, not only occasionally. (It looks like some resources are exhausted, but CPU rate < 5%, memory < 15%, network < 5%). when the system call between A and B fails, the B system call over HTTP to an external service also failed, with the same exception. Restarting both Tomcat services makes the whole system work properly. So repeatedly following steps 1 - 5, I have not found the root reason. Environment: windows 2008 R2 tomcat7.0.42 x86_64 oralce-jdk-1.7.0_40 Any ideas?

  Read the article

• Upgraded Ubuntu, all drives in one zpool marked unavailable

  - by Matt Sieker

  I just upgraded Ubuntu 14.04, and I had two ZFS pools on the server. There was some minor issue with me fighting with the ZFS driver and the kernel version, but that's worked out now. One pool came online, and mounted fine. The other didn't. The main difference between the tool is one was just a pool of disks (video/music storage), and the other was a raidz set (documents, etc) I've already attempted exporting and re-importing the pool, to no avail, attempting to import gets me this: root@kyou:/home/matt# zpool import -fFX -d /dev/disk/by-id/ pool: storage id: 15855792916570596778 state: UNAVAIL status: One or more devices contains corrupted data. action: The pool cannot be imported due to damaged devices or data. see: http://zfsonlinux.org/msg/ZFS-8000-5E config: storage UNAVAIL insufficient replicas raidz1-0 UNAVAIL insufficient replicas ata-SAMSUNG_HD103SJ_S246J90B134910 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 UNAVAIL ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 UNAVAIL The symlinks for those in /dev/disk/by-id also exist: root@kyou:/home/matt# ls -l /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910* /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51* lrwxrwxrwx 1 root root 9 May 27 19:31 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910 -> ../../sdb lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part9 -> ../../sdb9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523 -> ../../sdd lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part9 -> ../../sdd9 lrwxrwxrwx 1 root root 9 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969 -> ../../sde lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 May 27 19:15 /dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part9 -> ../../sde9 Inspecting the various /dev/sd* devices listed, they appear to be the correct ones (The 3 1TB drives that were in a raidz array). I've run zdb -l on each drive, dumping it to a file, and running a diff. The only difference on the 3 are the guid fields (Which I assume is expected). All 3 labels on each one are basically identical, and are as follows: version: 5000 name: 'storage' state: 0 txg: 4 pool_guid: 15855792916570596778 hostname: 'kyou' top_guid: 1683909657511667860 guid: 8815283814047599968 vdev_children: 1 vdev_tree: type: 'raidz' id: 0 guid: 1683909657511667860 nparity: 1 metaslab_array: 33 metaslab_shift: 34 ashift: 9 asize: 3000569954304 is_log: 0 create_txg: 4 children[0]: type: 'disk' id: 0 guid: 8815283814047599968 path: '/dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246J90B134910-part1' whole_disk: 1 create_txg: 4 children[1]: type: 'disk' id: 1 guid: 18036424618735999728 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51422523-part1' whole_disk: 1 create_txg: 4 children[2]: type: 'disk' id: 2 guid: 10307555127976192266 path: '/dev/disk/by-id/ata-WDC_WD10EARS-00Y5B1_WD-WMAV51535969-part1' whole_disk: 1 create_txg: 4 features_for_read: Stupidly, I do not have a recent backup of this pool. However, the pool was fine before reboot, and Linux sees the disks fine (I have smartctl running now to double check) So, in summary: I upgraded Ubuntu, and lost access to one of my two zpools. The difference between the pools is the one that came up was JBOD, the other was zraid. All drives in the unmountable zpool are marked UNAVAIL, with no notes for corrupted data The pools were both created with disks referenced from /dev/disk/by-id/. Symlinks from /dev/disk/by-id to the various /dev/sd devices seems to be correct zdb can read the labels from the drives. Pool has already been attempted to be exported/imported, and isn't able to import again. Is there some sort of black magic I can invoke via zpool/zfs to bring these disks back into a reasonable array? Can I run zpool create zraid ... without losing my data? Is my data gone anyhow?

  Read the article

• UNRAID V4.7: Lost write permission on Win7/Android devices

  - by JROC

  I'm currently running V4.7 and I haven't touched any of the user or share settings, and I'm periodically losing read.write permission on both my windows 7 pc and my android tablet connecting over the wireless. Sometime I can access my shares and see the folder directories, but when attempting to open a folder windows denies me access saying I don't have the proper permission. This is after I have logged in with my main account that has full read/write access of everything, same on my android device. This all started when I attempted to delete a large amount of files (8gb) to make more room and about half way through started getting permission errors. What could be causing this? Thanks

  Read the article

• How do I use saz-sudo puppet module to deploy my own sudoers file with hiera?

  - by mr.zog

  I have saz-sudo installed and have created a site_sudo module based (I hope) on it. Here's what I have in my site_sudo/manifest/init.pp file: class { 'site_sudo': } sudo::conf { 'web': source => 'puppet:///files/etc/sudoers', } sudo::conf { 'syseng': priority => 10, content => "%sysadm ALL=(ALL) NOPASSWD: ALL", } include sudo No matter what I do, the sudoers file on the target is always overwritten with the sudoers.rhel6 file from saz-sudo module. I'm using common.yaml too: classes: - site_sudo

  Read the article

• Linux - How to control Winbind Authentication cache timeout

  - by cybervedaa

  I have configured my linux machines (running CentOS 5.2) to authenticate against a Windows server running Active Directory. I have even enabled winbind offline logon. Everything works as expected, however I'm also looking to impose a TTL for the winbind authentication cache. So far all I found was the below snippet from the samba documentation winbind cache time (G) This parameter specifies the number of seconds the winbindd(8) daemon will cache user and group information before querying a Windows NT server again. **This does not apply to authentication requests**, these are always evaluated in real time unless the winbind offline logon option has been enabled. Default: winbind cache time = 300 Clearly the winbind cache time parameter does not control the cache TTL for authentication requests. Is there any other way I can implement a cache timeout for winbind authentication requests? Thank you

  Read the article

• How to push configurations to multiple Cisco Switches

  - by nixda

  Assume I have around 50 Cisco IE2000 Switches connected together and I want to reconfigure some settings, the same settings for every switch. Normally I would open a command line session via Putty and paste the commands. But as the number of switches is growing, even this method takes its time. I am aware of Kiwi CatTools. Unfortunately it's not free so I'm wondering if there are other efficient ways to configure a large number of Cisco switches.

  Read the article

• Postfix relay to multiple servers and multiple users

  - by Frankie

  I currently have postfix configured so that all users get relayed by the local machine with the exception of one user that gets relayed via gmail. To that extent I've added the following configuration: /etc/postfix/main.cf # default options to allow relay via gmail smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt smtp_sasl_security_options = noanonymous # map the relayhosts according to user sender_dependent_relayhost_maps = hash:/etc/postfix/relayhost_maps # keep a list of user and passwords smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd /etc/postfix/relayhost_maps user-one@localhost [smtp.gmail.com]:587 /etc/postfix/sasl_passwd [smtp.gmail.com]:587 [email protected]:user-one-pass-at-google I know I can map multiple users to multiple passwords using smtp_sasl_password_maps but that would mean that all relay would be done by gmail where I specifically want all relay to be done by the localhost with the exception of some users. Now I would like to have a user-two@localhost (etc) relay via google with their own respective passwords. Is that possible?

  Read the article

• How to run a website domain without redirecting if IP is already used for another website? [duplicate]

  - by SSpoke

  This question already has an answer here: Hosting multiple distinct folders for distinct domains 1 answer I bought a VPS Host that gave me only 1 IP Address which I used on my first domain name and it works without any problems. Now my second domain name I can't use the same ip address as it points to the first domain name. So I figured my only option was to use a GoDaddy hosted iframe redirection which redirects to a sub folder on my first domain which worked so far. Now I'm trying to load paypal from <?php headers() ?> and I get a permission error because of that iframe Refused to display 'https://www.paypal.com/cgi-bin/webscr?notify_url=&cmd=_cart&upload=1&business=removed&address_override=1' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'. How do I avoid the Iframe solution for my second domain while not messing up my first domain? Somebody I forgot once told me it doesn't matter if you have 1 IP Address you could host multiple websites on it? how it that possible the DNS doesn't seem to work off ports afaik, yes I could host multiple websites on different folders but that's not what I call hosting a real website it has to be pointed by a domain name, so this iframe issue doesn't happen My server configuration is httpd (apache) that comes with CentOS 6 (Linux) operating system

  Read the article

• 4096 and 8192 block size read slower than write? by using lsi 9361-8i RAID10

  - by Min Hong Tan

  is it possible that 1024 and 2048 block size read speed is faster than 4096 and 8192 block? I'm using lsi 9361-8i with RAID 10 , with 8 x Kingston E50 250G. result: 1024 = Write: 2,251 MB/s Read: 2,625 MB/s 2048 = Write: 2,141 MB/s Read: 3,672 MB/s 4096 = Write: 2,147 MB/s Read: 231 MB/s 8192 = Write: 2,147 MB/s Read: 442 MB/s is there any possible? and below is the reading when i simply want to test out the RAID 10 function and disaster test by taking out one of the 250G harddisk. the result is different like below: Result: 1024 = Write: 825 MB/s Read: 1,139 MB/s 2048 = Write: 797 MB/s Read: 1,312 MB/s 4096 = Write: 911 MB/s Read: 1,342 MB/s 8192 = Write: 786 MB/s Read: 1,204 MB/s and the result for 4096 and 8192block are different? can any one explain to me is it normal? or I need to do some tuning/configuration? will it affect my host linux performance?

  Read the article

• JBoss7 load balancing with mod_proxy_balancer - session not working

  - by Phil P.

  I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

  Read the article

• SSH connection times out

  - by mark

  Given: vm - a WinXPsp3 virtual machine hosted by a Win7sp1 physical machine alice is the user on vm srv - a Win2008R2sp1 server bob is the user on srv quake - a linux server mark is the user on quake Both vm and srv have the same new installation of cygwin (1.7.9) and openssh. Firewall service is disabled on vm (and its host) and on srv All the machines can be pinged from all the machines. ssh mark@quake works OK from both vm and srv. ssh bob@srv works OK from both quake and vm. ssh alice@vm works on the vm itself only, but it fails on the other two machines: alice@vm ~ $ ssh alice@vm alice@vm's password: Last login: Tue Oct 25 23:42:09 2011 from vm.shunra.net [mark@Quake ~]$ ssh -vvv alice@vm OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out bob@Srv ~ $ ssh -vvv alice@vm OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out I used ssh-host-config both on vm and srv to configure the ssh to run as a windows service. Besides that I did nothing else. Can anyone help me troubleshoot this issue? Thank you very much. EDIT The virtual machine software is VMWare Workstation 7.1.4. I think the problem is in its settings, but I have no idea where exactly. The Network Adapter is set to Bridged. EDIT2 All the machines are located in the company lab, I think all of them are on the same segment, but I may be wrong. Below is the ipconfig /all output for each machine (skipping the linux server). I have deleted the Tunnel adapters to keep the output minimal. If anyone thinks they matter, do tell so and I will post them as well. In addition ping output is given to show that DNS is correct. Something else, may be relevant, may be not. Doing psexec to srv works OK, whereas to vm failes with Access Denied. srv: C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : srv Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) Physical Address. . . . . . . . . : E4-1F-13-6D-F3-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.30.6.9(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Windows\system32>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time=1ms TTL=128 Reply from 172.30.2.60: bytes=32 time=4ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 4ms, Average = 1ms C:\Windows\system32> vm: C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net shunranet Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : shunranet Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical Address. . . . . . . . . : 00-0C-29-8F-A0-0B Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 172.30.2.60 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCP Server . . . . . . . . . . . : 172.30.1.1 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 Lease Obtained. . . . . . . . . . : Tuesday, October 25, 2011 18:16:34 Lease Expires . . . . . . . . . . : Wednesday, November 02, 2011 18:16:34 C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time=1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\> vm-host (the host machine of the vm): C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm-host Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) Physical Address. . . . . . . . . : 6C-F0-49-E7-E9-30 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f59d:7f6e:1510:6f%10(Preferred) IPv4 Address. . . . . . . . . . . : 172.30.6.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCPv6 IAID . . . . . . . . . . . : 242020425 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : 172.30.1.1 194.90.1.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd92:38c0:9a6d:c008%16(Preferred) Autoconfiguration IPv4 Address. . : 169.254.192.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::edb9:b78c:a504:593b%17(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.5.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 369119318 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\> EDIT3 I have just checked - the vm-host is able to ssh to the vm machine! I still do not know how to leverage this discovery to solve the problem.

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• How to configure CruiseControl.Net for Windows Authentication?

  - by balu

  I am using CruiseControl.Net for continuous integration which is now accessing the dashboard through login plugin, which in turn is authenticating and authorizing after verifying it with a set of users saved as XML file in the CruiseControl.Net server. Now, i need to bring in Windows Authentication to the system whereby which CruiseControl.Net server webdashboard when accessed from a client machine(local machine associated with a common server), would be authenticated and be authorized to access the CruiseControl.Net features based on the authority of the logged in users. Kindly guide me to go ahead with this, appreciate all kinds of resources that would be helpful for achieving this. Thanks.

  Read the article

• How can I tell which config file Apache is using?

  - by Claudiu

  I'm trying to set up virtual hosts on Mac OS X. I've been modifying httpd.conf and restarting the server, but haven't had any luck in getting it to work. Furthermore, I notice that it's not serving files in the DocumentRoot mentioned in httpd.conf (Libraries/WebServer/Documents), but in a different directory (/usr/local/apache2/htdocs). I don't see this folder mentioned anywhere in httpd.conf. Furthermore, PHP works, but the "LoadModule php5_module" line is commented out. This makes me think it's using another .conf file. How can I figure out which config is actually being loaded? Update: I just deleted that httpd.conf and apache behaves the same after restart, so it definitely wasn't using it!

  Read the article

• Netcat server output with multiple greps

  - by Sridhar-Sarnobat

  I'm trying to send some data from my web browser to a txt file on another computer. This works fine: echo 'Done' | nc -l -k -p 8080 | grep "GET" >> request_data.txt Now I want to do some further processing before writing the http request data to my txt file (involving regex maniuplation). But if I try to do something like this nothing is written to the file: echo 'Done' | nc -l -k -p 8080 | grep "GET" | grep "HTTP" >> request_data.txt (for simplicity of explanation I've used another grep instead of say awk) Why does the 2nd grep not get any data from the output of the first grep? I'm guessing piping with netcat works differently to what I've assumed to get this far. How do I perform a 2nd grep before writing to my txt file? My debugging so far suggests: It is nothing to do with stderr vs stdout Parentheses don't help

  Read the article

• Excel 2013: Is it possible to collapse rows only in a specific column?

  - by h7u9i

  In my spreadsheet, I'm trying to figure out a way to collapse rows in a specific column. Right now, if I do Data - Group - Group... - Rows, it'll collapse the entire row. I want to collapse rows only in a specific column. Example: |---------|----------| | hi | + data | |---------|----------| | hello | + data2 | |---------|----------| | | | |---------|----------| | | | And opening data 1 would turn into: |---------|----------| | hi | - data1 | |---------|----------| | hello | point1 | |---------|----------| | | point2 | |---------|----------| | | + data2 | |---------|----------| | | | |---------|----------| | | | Is this possible to do in Excel?

  Read the article

• Block protect (Keep last line of paragraph with next paragraph)

  - by Ed Cottrell

  Is there a way to force Microsoft Word 2010 to keep the last line of a paragraph with the next paragraph? An example of when this is relevant is when starting a block quote; it doesn't look good to have the block quote start at the top of a new page, particularly when it's introduced by a partial sentence, like this: "Lorem ipsum" is sample text widely used in the publishing industry, as the text has spacing roughly similar to that of English and therefore looks "normal" but unintelligible to an English reader's eye, allowing the reader to focus on design elements. It begins, Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam rhoncus laoreet risus, quis congue leo viverra congue. Suspendisse magna massa, viverra imperdiet est eu, ultrices volutpat lectus. Sed pulvinar est id risus lobortis venenatis. There shouldn't be a page break after "begins," because it looks like the sentence ends abruptly. "Keep lines together" won't work, because by definition we're talking about two paragraphs. "Keep with next" won't work if the first paragraph is larger than a couple of lines, because then you get an awkwardly large space at the bottom of a page. Manual line breaks obviously work, but only when the document is final, which is often less certain than it seems. I know WordPerfect has a feature called "block protect" that does this, but I have not found even an acceptable substitute in Word. I have played with style separators and hidden paragraph breaks, but to no avail. I would love a special character, kind of like the nonbreaking space or zero width optional space, that tells Word to move to the next page if the next paragraph would otherwise start the page. A macro would also be great, but I haven't been able to find a starting point (like how to detect where non-manual page breaks fall). Edit: It looks like "Keep with next" works this way in Word 2013, but I specifically need a fix that works in Word 2010.

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• Missing Items from Start Menu

  - by ChrisHDog

  I used to be able to search/open items from my start menu, but recently items have gone "missing". Example: I used to be able to hit the start menu, type "iis" and the top item would be iis manager and I could open and run ... now I get a list of items that are not IIS The same is true with typing "servi" - previously i would get Services (i.e. open local services), now it isn't showing I've checked the properties on Customise Start Menu for "Search other files and libraries" and it is selected as "Search without public folders" ... is there something else that is happening? It seems like something has changed, but I can determine what/how to revert to what it was.

  Read the article

• AMD FX8350 CPU - CoolerMaster Silencio 650 Case - New Water Cooling System

  - by fat_mike

  Lately after a use of 6 months of my AMD FX8350 CPU I'm experiencing high temperatures and loud noise coming from the CPU fan(I set that in order to keep it cooler). I decided to replace the stock fan with a water cooling system in order to keep my CPU quite and cool and add one or two more case fans too. Here is my case's airflow diagram: http://www.coolermaster.com/microsite/silencio_650/Airflow.html My configuration now is: 2x120mm intake front(stock with case) 1x120mm exhaust rear(stock with case) 1 CPU stock I'm planning to buy Corsair Hydro Series H100i(www.corsair.com/en-us/hydro-series-h100i-extreme-performance-liquid-cpu-cooler) and place the radiator in the front of my case(intake) and add an 120mm bottom intake and/or an 140mm top exhaust fan. My CPU lies near the top of the MO. Is it a good practice to have a water-cooling system that takes air in? As you can see here the front of the case is made of aluminum. Can the fresh air go in? Does it even fit? If not, is it wiser to get Corsair Hydro Series H80i (www.corsair.com/en-us/hydro-series-h80i-high-performance-liquid-cpu-cooler) and place the radiator on top of my case(exhaust) and keep the front 2x120mm stock and add one more as intake on bottom. If you have any other idea let me know. Thank you. EDIT: The CPU fan running ~3000rpm and temp is around 40~43C on idle and save energy. When temp is going over 55C when running multiple programs and servers on localhost(tomcat, wamp) rpm is around 5500 and loud! I'm running Win8.1 CPU not overclocked PS: Due to my reputation i couldn't post the links that was necessary. I will edit ASAP.

  Read the article

• How to permanently add wireless interfaces with iw

  - by walli

  How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >