Daily Archives

Articles indexed Thursday May 31 2012

Page 10/18 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Disabling at application level a nic (network interface) on Windows

    - by Leandro
    How can I disable at application level a network interface? The main question is this: If I disable the nic trough wmic (win7) or devcon (XP), the "plug and play" of a wired nic doesn't work any more. For example, if the user put the cable on a disabled nic, the OS doesn't know about it. So I need to persist the enable condition but disabling the networking like a disable nic. There's some API, network configuration (routing, changing ip, changing gateway, any), .NET Framework resource (Only NetFramework 2.0) or do you can think in any workaround to do this? Suggest and ideas also will be treated as a solution. Thanks and kind regards.

    Read the article

  • USB drive is empty in drive management

    - by Simon Verbeke
    I've got a USB drive here, that somebody asked to try and fix. When inserting it, it shows up in explorer, but when I double click it I get a message saying "Please insert a disk into drive H:". So I went to disk management, to see if it was correctly formatted. It doesn't show up in the upper pane, and in the lower pane it tells me there is no medium in H:. After this I used chkdsk: the path is invalid. Then I tried TestDisk, which is supposed to look at raw data, and this can't even find the disk. So I'm assuming the drive is dead, even though its LED is burning. But I was wondering if there might be something else I could try? This system is Windows 7 Ultimate 64bit by the way. (I'm translating things from a Dutch install, so some names might be wrong)

    Read the article

  • How can I create matrices of data in Excel?

    - by sandeep
    I want to create a 4*4 matrix in excel 2007 by taking three or more columns or conditions for example Column index Row index Name 1 2 x 2 3 y 3 4 z 4 1 p this is how data looks and i want it for 1*1 cell as p and 1*2 cell as x and so on. and I want out put as follows matrix 1 2 3 4 1 p x y z 2 p x y z 3 p x y z 4 p x y z and I have very huge data like this some times the matrix size goes up to 60*60 also.

    Read the article

  • Are there any ebook readers for Win 7 Pro which can display two books side-side?

    - by verve
    I'm trying to learn a language and I want to be able to open the English version of a book and the German one together on the screen to compare etc.I'm particularly interested in displaying Kindle-typebooks side-by-side. I need software that is simple to use and not-too-ugly looking. Ha. Aesthetics seem to matter to me when I'm learning...or, any reader that can display ANY popular ebook formats in parallel form will do! Win 7. IE 9. Freeware or not.

    Read the article

  • How do I force excel (and other office products) to stop opening files in the same application?

    - by KronoS
    Whenever I "double click" on an Excel file and another Excel file is open, the newly opened file automatically opens in the same application window as the previously opened Excel file. This isn't limited to just Excel, as I've seen Word do this as well. This poses a problem when wanting to compare documents side by side. The current solution I have for this is to actually open another Excel or Word instance, and then open the file from within that application window itself. Is there a way to force Office to open a new instance of the application when double clicking on the file icons? I'm currently using Office 2007 and Windows XP but I've seen this on Office 2010 and Windows Vista and 7. I'm looking for an overall solution if possible.

    Read the article

  • IE8 Stopped Keeping History

    - by BillP3rd
    Like the title says, apparently my IE8 has stopped keeping the history of pages I've visited. I've searched SU and Google and can't find anything that seems to describe what I'm seeing. I have IE set to retain history for 999 days (the maximum allowed): As you can see below, apart from today and last Thursday, IE appears to be oblivious to any activity more recent than three weeks ago. Clicking on either "Thursday" or "Today" reveals no recorded history, however. Very odd behavior. Finally, the history does extend back 30 weeks to when I built the computer, and there is recorded history for every week. I'd appreciate suggestions. NB. Windows 7 Ultimate, x64 (but 32-bit IE8).

    Read the article

  • Message Date/Time tag in Lotus Notes

    - by TeeKay
    I've noticed that within Notes (8.5.2, basic client, fat client and iNotes) the date/time displayed on the eMail envelope AND the date/time on the message header is the same and appearently that time that Domino received the message. When using BES, the message forwarded to the BlackBerry by Domino/BES has the RECEIVED date/time on the envelope and the SENT date/time displayed in the message. In the basic/fat client with properties the sent time is viewable in one of the "Received" tags. Having the sent time easily viewable is helpful, especially if your trying to trouble-shoot a problem. Is this a configuration feature? Is it selectable in the client or in Domino? Thx

    Read the article

  • How to connect computers to a network printer behind a router?

    - by kokbira
    General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

    Read the article

  • Microsoft Access: computer freezes when user tries to update record

    - by CarlF
    A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

    Read the article

  • Rendering artifact when using Eclipse (FlashBuilder)

    - by Demian Brecht
    Once in a while when using FlashBuilder, I'll get a rendering artifact that doesn't go away until I do a full reboot. This artifact seems to be caused by a popup triggered by code documentation popups (hovering over keywords) that linger after the popup has been dismissed: This behavior is seemingly random and incredibly annoying. It only happens when using Eclipse (although I don't run many Java-based programs) and run an NVidia Quadro 2000M (with the latest drivers - figured I'd try that before posting). Has anyone else encountered this issue? Any known solutions?

    Read the article

  • Disable Offline Files (mobsync.exe) on Windows 7 Home

    - by Synetech
    This morning I was watching the CPU graph of a Windows 7 Home laptop and noticed that every few seconds, the CPU would spike several percent. I watched the processes and determined that it was mobsync.exe (Offline Files) that was the culprit. I tried the usual steps that Googling turns up, and clicking the Manage Offline Files link to bring up the Offline Files dialog to click Disable Synch does not work because the dialog will not display. This makes sense since everything I have read indicates that Offline Files is not even included/supported in the Home version, so I am at a loss as to why it is running at all, let alone why it is sucking up CPU cycles. (My best guess is that it was started when they pressed Win+X to access the Mobility Center.) Of course I can just kill mobsync, but it could always just come back. How/why would mobsync be running on a Home version and how can it be disabled (of course the Group Policy editor is not available on a Home version).

    Read the article

  • what is this kicker process that shows up when i do top?

    - by rashid
    This morning when I came to my office i noticed the machine very slow so I did 'top' at the terminal and i see at least 50 process running and they are "kicker-3.4-reve"!!! I am using RedHat Linux It is taking up memory, how do I get rid of it? How could this happen and how can I avoid it fro happening again? (There is no point in pasting the whole thing but here is a glimpse) 31508 <user> 25 0 87212 8388 7144 S 3 0.1 1:48.34 kicker-3.4-reve 31675 <user> 25 0 87212 8384 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31708 <user> 25 0 87212 8384 7144 S 3 0.1 1:45.04 kicker-3.4-reve 31915 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31928 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31930 <user> 25 0 87212 8388 7144 S 3 0.1 1:45.74 kicker-3.4-reve 31960 <user> 25 0 87212 8384 7144 S 3 0.1 1:47.14 kicker-3.4-reve 32050 <user> 25 0 87212 8392 7144 S 3 0.1 1:44.24 kicker-3.4-reve 32053 <user> 25 0 87212 8384 7144 S 3 0.1 1:44.24 kicker-3.4-reve 32168 <user> 25 0 87212 8392 7144 S 3 0.1 1:45.34 kicker-3.4-reve

    Read the article

  • winbind not working

    - by Yon
    I'm trying to set up winbind with an Active Directory running on Win2003. This works: net rpc user -S SOMEDOMAIN -U Administrator Password: Administrator ASPNET Demo Guest IUSR_SERVER20 IWAM_SERVER20 krbtgt RemoteUser SUPPORT_388945a0 This does not: wbinfo -u Error looking up domain users From the winbindd log: [2012/05/31 16:45:38, 1] nsswitch/winbindd_ads.c:ads_cached_connection(128) ads_connect for domain SOMEDOMAIN failed: Operations error [2012/05/31 16:46:38, 1] nsswitch/winbindd_util.c:trustdom_recv(230) Could not receive trustdoms ADS is not working with this domain. Why is winbind trying to use it instead of RPC? How can I force it to use only RPC and for all of this to work?

    Read the article

  • Windows Update cannot currently check for updates, because the service is not running

    - by Lee
    This morning I attempted to run Windows Update on two of my Windows 7 PCs (both are virtual machines), and I ran into this interesting pop-up error message. I have never encountered this problem before, so I was somewhat perplexed. From the message, my first thought was to see if the Windows Update service was running. It was. As usual, the solution is never so simple. I attempted to restart the service and reboot the PCs to no avail. So, I am off to the interwebs for a solution. I did find a solution to the problem, so I thought to post it for my future reference and for anyone else who may encounter this problem. I will be posting the answer shortly. If you have alternate solutions that have worked for you, please feel free to leave a post or comment.

    Read the article

  • I have 4 GB RAM, but the system only reports 3 GB? [closed]

    - by RawR Crew
    Possible Duplicate: Windows 7 64-bit is only using 3 GB out of 4 GB My HP HDX 16 laptop has 4GB of ram and runs a 64-bit system. I always go into Dxdiag for some reason and i always see it says 4096 MB of RAM. But today I felt the PC was misbehaving, so i opened it and it said 3128 MB of RAM. Where did that 1 GB go?? When I check the computer properties, it says I'm using a 64-bit system with 4.00GB of RAM, but why does everything else say it has 3?

    Read the article

  • The Art of Motion Capture [Video]

    - by Jason Fitzpatrick
    Motion capture is the process of using cameras and actors wearing special suits in order to build realistic and fluid foundations for CGI characters. Watch this informative video to see how the process works. Courtesy of the video series Good Job, a series focused on interesting jobs within the film and video game industry, we see how martial artists wearing special suits dotted with LEDs generate the basic framework for the fighters in the popular video game series Tekken. [via Neatorama] HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

    Read the article

  • Is Pluto a Planet or Not? [Video]

    - by Asian Angel
    Have you ever wondered why Pluto lost its status as a planet? This video explains why it happened and shows the set of criteria that scientists use to determine a celestial body’s status as a planet or not. Is Pluto a planet? [via Geeks are Sexy] HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

    Read the article

  • Understanding Photography and Color Temperature

    - by Jason Fitzpatrick
    Most digital cameras have the ability to set the “color temperature” based on the condition, but what exactly does that mean? This simple cheat sheet highlights the differences between various lighting situations and what settings you should use. Courtesy of Digital Camera World, the above chart shows where on the scale various color temperatures fall, how the automatic white balance works, and which presets you should use if available. What Is Color Temperature? [via Unpluggd] HTG Explains: Why Linux Doesn’t Need Defragmenting How to Convert News Feeds to Ebooks with Calibre How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More

    Read the article

  • HP présente "Net-Zero Energy DataCenter", une architecture permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts

    HP présente son architecture "Net-Zero Energy DataCenter", permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts et dépendance des réseaux électriques HP vient de présenter son concept d'architecture « Net-Zero Energy » des centres de données économes en énergie, permettant de réduire la dépendance des réseaux électriques traditionnels. La vision de HP est de permettre aux entreprises de faire fonctionner les centres de données avec en utilisant leur propre énergie générée sur place, grâce à des sources renouvelables afin d'éliminer des dépendances comme l'emplacement, l'approvisionnement en énergie et les couts. L'architecture proposée ...

    Read the article

  • Google migre AdWords de MySQL vers F1, son nouveau SGBDR distribué, développé en interne qui combine le meilleur de NoSQL et SQL

    Google migre AdWords de MySQL vers F1 son nouveau SGBDR distribué développé en interne qui combine le meilleur de NoSQL et SQL Google a développé en catimini son propre gestionnaire de base de données relationnelle. La société a déplacé récemment plusieurs de ses services de publicité de MySQL vers F1, un nouveau SGDBR « Fault-Tolerant Distributed » développé en interne. Présenté lors du forum SIGMOD 2012 de Scottsdale en Arizona sur les bases de données, F1 combine les meilleures approches des SGBDR et des bases de données NoSQL, selon la division Google Research, à l'origine du projet. F1 est essentiellement centré autour de l'évolutivité, la tolérance aux pann...

    Read the article

  • La migration des applications Android/iOS sur Windows Phone bientôt possible ? Un brevet de Microsoft dévoile un service de transition

    La migration des applications Android/iOS sur Windows Phone bientôt possible ? Un brevet de Microsoft dévoile un nouveau service pour faciliter la transition vers son OS Le succès d'une plateforme mobile passe aussi par la qualité et la quantité d'applications disponibles sur sa galerie. Microsoft est conscient de cela, et a déjà développé plusieurs stratégies pour attirer les développeurs mobiles. La firme avait par exemple publié des outils pour aider les développeurs Android et iOS à porter leurs applications existantes sur Windows Phone, et faciliter la transition d'un écosystème vers sa plateforme. Mais la société n'a pas l'intention de s'arrêter là. Selon un dépôt d...

    Read the article

  • The Use-Case Driven Approach to Change Management

    - by Lauren Clark
    In the third entry of the series on OUM and PMI’s Pulse of the Profession, we took a look at the continued importance of change management and risk management. The topic of change management and OUM’s use-case driven approach has come up in few recent conversations. So I thought I would jot down a few thoughts on how the use-case driven approach aids a project team in managing the project’s scope. The use-case model is one of several tools in OUM that is used to establish and manage the project's scope.  Because a use-case model can be understood by both business and IT project team members, it can serve as a bridge for ongoing collaboration as well as a visual diagram that encapsulates all agreed-upon functionality. This makes it a vital artifact in identifying changes to the project’s scope. Here are some of the primary benefits of using the use-case model as part of the effort for establishing and managing project scope: The use-case model quickly communicates scope in a straightforward manner. All project stakeholders can have a common foundation for the decisions regarding architecture and design and how they relate to the project's objectives. Once agreed upon, the model can be put under change control and any updates to the model can then be quickly identified as potentially affecting the project’s scope.  Changes requested or discovered later in the project can be analyzed objectively for their impact on project's budget, resources and schedule. A modular foundation for the design of the software solution can be established in Elaboration.  This permits work to be divided up effectively and executed in so that the most important and riskiest use-cases can be tackled early in the project. The use-case model helps the team make informed decisions about implementation priorities, which allows effective allocation of limited project resources.  This is very helpful in not only managing scope, but in doing iterative and incremental planning which relies heavily on the ability to identify project priorities. Bottom line is that the use-case model gives the project team solid understanding of scope early in the project.  Combine this understanding with effective project management and communication and you have an effective tool for reducing the risk of overruns in budget and/or time due to out of control scope changes. Now that you’ve had a chance to read these thoughts on the use-case model and project scope, please let me know your feedback based on your experience.

    Read the article

  • Creating an SMF service for mercurial web server

    - by Chris W Beal
    I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

    Read the article

  • The Application Architecture Domain

    - by Michael Glas
    I have been spending a lot of time thinking about Application Architecture in the context of EA. More specifically, as an Enterprise Architect, what do I need to consider when looking at/defining/designing the Application Architecture Domain?There are several definitions of Application Architecture. TOGAF says “The objective here [in Application Architecture] is to define the major kinds of application system necessary to process the data and support the business”. FEA says the Application Architecture “Defines the applications needed to manage the data and support the business functions”.I agree with these definitions. They reflect what the Application Architecture domain does. However, they need to be decomposed to be practical.I find it useful to define a set of views into the Application Architecture domain. These views reflect what an EA needs to consider when working with/in the Applications Architecture domain. These viewpoints are, at a high level:Capability View: This view reflects how applications alignment with business capabilities. It is a super set of the following views when viewed in aggregate. By looking at the Application Architecture domain in terms of the business capabilities it supports, you get a good perspective on how those applications are directly supporting the business.Technology View: The technology view reflects the underlying technology that makes up the applications. Based on the number of rationalization activities I have seen (more specifically application rationalization), the phrase “complexity equals cost” drives the importance of the technology view, especially when attempting to reduce that complexity through standardization type activities. Some of the technology components to be considered are: Software: The application itself as well as the software the application relies on to function (web servers, application servers). Infrastructure: The underlying hardware and network components required by the application and supporting application software. Development: How the application is created and maintained. This encompasses development components that are part of the application itself (i.e. customizable functions), as well as bolt on development through web services, API’s, etc. The maintenance process itself also falls under this view. Integration: The interfaces that the application provides for integration as well as the integrations to other applications and data sources the application requires to function. Type: Reflects the kind of application (mash-up, 3 tiered, etc). (Note: functional type [CRM, HCM, etc.] are reflected under the capability view). Organization View: Organizations are comprised of people and those people use applications to do their jobs. Trying to define the application architecture domain without taking the organization that will use/fund/change it into consideration is like trying to design a car without thinking about who will drive it (i.e. you may end up building a formula 1 car for a family of 5 that is really looking for a minivan). This view reflects the people aspect of the application. It includes: Ownership: Who ‘owns’ the application? This will usually reflect primary funding and utilization but not always. Funding: Who funds both the acquisition/creation as well as the on-going maintenance (funding to create/change/operate)? Change: Who can/does request changes to the application and what process to the follow? Utilization: Who uses the application, how often do they use it, and how do they use it? Support: Which organization is responsible for the on-going support of the application? Information View: Whether or not you subscribe to the view that “information drives the enterprise”, it is a fact that information is critical. The management, creation, and organization of that information are primary functions of enterprise applications. This view reflects how the applications are tied to information (or at a higher level – how the Application Architecture domain relates to the Information Architecture domain). It includes: Access: The application is the mechanism by which end users access information. This could be through a primary application (i.e. CRM application), or through an information access type application (a BI application as an example). Creation: Applications create data in order to provide information to end-users. (I.e. an application creates an order to be used by an end-user as part of the fulfillment process). Consumption: Describes the data required by applications to function (i.e. a product id is required by a purchasing application to create an order. Application Service View: Organizations today are striving to be more agile. As an EA, I need to provide an architecture that supports this agility. One of the primary ways to achieve the required agility in the application architecture domain is through the use of ‘services’ (think SOA, web services, etc.). Whether it is through building applications from the ground up utilizing services, service enabling an existing application, or buying applications that are already ‘service enabled’, compartmentalizing application functions for re-use helps enable flexibility in the use of those applications in support of the required business agility. The applications service view consists of: Services: Here, I refer to the generic definition of a service “a set of related software functionalities that can be reused for different purposes, together with the policies that should control its usage”. Functions: The activities within an application that are not available / applicable for re-use. This view is helpful when identifying duplication functions between applications that are not service enabled. Delivery Model View: It is hard to talk about EA today without hearing the terms ‘cloud’ or shared services.  Organizations are looking at the ways their applications are delivered for several reasons, to reduce cost (both CAPEX and OPEX), to improve agility (time to market as an example), etc.  From an EA perspective, where/how an application is deployed has impacts on the overall enterprise architecture. From integration concerns to SLA requirements to security and compliance issues, the Enterprise Architect needs to factor in how applications are delivered when designing the Enterprise Architecture. This view reflects how applications are delivered to end-users. The delivery model view consists of different types of delivery mechanisms/deployment options for applications: Traditional: Reflects non-cloud type delivery options. The most prevalent consists of an application running on dedicated hardware (usually specific to an environment) for a single consumer. Private Cloud: The application runs on infrastructure provisioned for exclusive use by a single organization comprising multiple consumers. Public Cloud: The application runs on infrastructure provisioned for open use by the general public. Hybrid: The application is deployed on two or more distinct cloud infrastructures (private, community, or public) that remain unique entities, but are bound together by standardized or proprietary technology that enables data and application portability. While by no means comprehensive, I find that applying these views to the application domain gives a good understanding of what an EA needs to consider when effecting changes to the Application Architecture domain.Finally, the application architecture domain is one of several architecture domains that an EA must consider when developing an overall Enterprise Architecture. The Oracle Enterprise Architecture Framework defines four Primary domains: Business Architecture, Application Architecture, Information Architecture, and Technology Architecture. Each domain links to the others either directly or indirectly at some point. Oracle links them at a high level as follows:Business Capabilities and/or Business Processes (Business Architecture), links to the Applications that enable the capability/process (Applications Architecture – COTS, Custom), links to the Information Assets managed/maintained by the Applications (Information Architecture), links to the technology infrastructure upon which all this runs (Technology Architecture - integration, security, BI/DW, DB infrastructure, deployment model). There are however, times when the EA needs to narrow focus to a particular domain for some period of time. These views help me to do just that.

    Read the article

  • ArchBeat Link-o-Rama for 2012-05-31

    - by Bob Rhubart
    Eclipse DemoCamp - June 2012 - Redwood Shores, CA wiki.eclipse.org Oracle HQ 10 Twin Dolphin Dr. Redwood Shores, CA Presentations: The evolution of Java persistence, Doug Clarke, EclipseLink Project Lead, Oracle Eclipse Project Sapphire, Konstantin Komissarchik, Sapphire Project Lead, Oracle Developing Rich ADF Applications with Java EE, Greg Stachnick, Oracle Leveraging OSGi In The Enterprise, Kamal Muralidharan, Lead Engineer, eBay NVIDIA Nsight Eclipse Edition, Goodwin (Tech lead - Visual tools), Eugene Ostroukhov (Senior engineer – Visual tools)   BI Architecture Master Class for Partners - Oracle Architecture Unplugged blogs.oracle.com June 21, 2012 This workshop will be highly interactive and is aimed at Oracle OPN member partners who are IT Architects and BI+W specialists. This will be a highly interactive session and does not involve slide presentations or product feature details, it addresses IT-Architectural issues and considerations for the IT-Architect Community. 2012 Oracle Fusion Middleware Innovation Awards - Win a FREE Pass to Oracle OpenWorld 2012 in SF www.oracle.com Share your use of Oracle Fusion Middleware solutions and how they help your organization drive business innovation. You just might win a free pass to Oracle Openworld 2012 in San Francisco. Deadline for submissions in July 17, 2012. IT professionals: Very much the time to change our approach | Andy Mulholland www.capgemini.com This final post by retiring Capgemini CTO blogger Andy Mulholland is a must-read for anyone in IT. 10 Great WebCenter Sites Resources (FatWire) | John Brunswick www.johnbrunswick.com John Brunswick shares "some good resources that span the WebCenter Sites and FatWire brands, to get a consolidated list of helpful destinations for ongoing education." Cloning a WebCenter Portal Managed Server | Maiko Rocha blogs.oracle.com WebCenter and ADF A-Team blogger Maiko Rocha shows how to easily add a new managed server to a single-node domain to make it a cluster. Sorting and Filtering By Model-Based LOV Display Value | Steven Davelaar blogs.oracle.com How-to by WebCenter and ADF A-Team blogger Steven Davelaar. Designing and Developing Cross-Cutting Features | Stephen Rylander www.infoq.com Architects are often tasked with a business feature that must span systems. This article by will provide strategies to handle the change and guide your thinking about separating system boundaries and what that means for your technical design. Thought for the Day "A committee is a group of people who individually can do nothing, but who, as a group, can meet and decide that nothing can be done." — Fred Allen (5/31/1894 – 3/17/1956) Source: Brainy Quote

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >