Daily Archives

Articles indexed Sunday September 9 2012

Page 11/14 | < Previous Page | 7 8 9 10 11 12 13 14  | Next Page >

• reaching 99.9999% uptime

  - by user35204

  I am currently developing a project which is mission-critical. The actual domain name is registered with 1 & 1 and I plan on purchasing DynDNS Custom DNS service (which has 5 different geographical locations for DNS) and then another secondary DNS service to make sure my DNS is as failover safe as possible. Does it matter that the registration is with 1 & 1 - are they a weak link in the chain? All I really use them for is to say that DynDNS is my primary DNS nameserver and then my secondary DNS is my other nameserver. I can transfer the registration to DynDNS - Im just not sure if it really matters or not. Thanks

  Read the article

• Multiple SSL domains on the same IP address and same port?

  - by John

  This is a Canonical Question about Hosting multiple SSL websites on the same IP. I was under the impression that each SSL Certificate required it's own unique IP Address/Port combination. But the answer to a previous question I posted is at odds with this claim. Using information from that Question, I was able to get multiple SSL certificates to work on the same IP address and on port 443. I am very confused as to why this works given the assumption above and reinforced by others that each SSL domain website on the same server requires its own IP/Port. I am suspicious that I did something wrong. Can multiple SSL Certificates be used this way?

  Read the article

• How to use DNS to redirect domain to specific port on my server

  - by Tomaszs

  I'm running a web server on port 80 and another on port 87. I would like to use DNS so that www.example.com goes to port 87. How can I accomplish this using DNS only? Canonical Question: This question was originally asking about running IIS and Apache on the same server, but the same concepts can be applied to any server software receiving connections from clients. The Answers below describe the technical problems with using DNS to assign a port number for a client to connect.

  Read the article

• How to configure a shortcut for an SSH connection through a SSH tunnel

  - by Simone Carletti

  My company production servers (FOO, BAR...) are located behind two gateway servers (A, B). In order to connect to server FOO, I have to open a ssh connection with server A or B with my username JOHNDOE, then from A (or B) I can access any production server opening a SSH connection with a standard username (let's call it WEBBY). So, each time I have to do something like: ssh johndoe@a ... ssh webby@foo ... # now I can work on the server As you can imagine, this is a hassle when I need to use scp or if I need to quickly open multiple connections. I have configured a ssh key and also I'm using .ssh/config for some shortcuts. I was wondering if I can create some kind of ssh configuration in order to type ssh foo and let SSH open/forward all the connections for me. Is it possible? Edit womble's answer is exactly what I was looking for but it seems right now I can't use netcat because it's not installed on the gateway server. weppos:~ weppos$ ssh foo -vv OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /Users/xyz/.ssh/config debug1: Applying options for foo debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Executing proxy command: exec ssh a nc -w 3 foo 22 debug1: permanently_drop_suid: 501 debug1: identity file /Users/xyz/.ssh/identity type -1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_rsa type 1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_dsa type 2 bash: nc: command not found ssh_exchange_identification: Connection closed by remote host

  Read the article

• WINDOWS - Deleting Temporary Internet Files through Group Policy

  - by Muhammad Ali

  I have a domain controller running on Windows 2008 Server R2 and users login to application servers on which Windows 2003 Server SP2 is installed. I have applied a Group Policy to clean temporary internet files on exit i.e to delete all temporary internet files when users close the browser. But the group policy doesn't seem to work as user profile size keeps on increasing and the major space is occupied by temporary internet files therefore increasing the disk usage. How can i enforce automatic deletion of temporary internet files?

  Read the article

• SVN Error when connecting from MacBook

  - by user66850

  This is drying me nuts for last 5 days!!! Out of the blue 5 days ago, SVN access from my MacBook Pro failed: I cannot access any SVN (i.e. not in our University or open source projects etc). The error obtain when performing 'svn co', or any other svn commands is shown below. This is same message is obtained irrespective of the svn repository (i.e. it is something due to my Macbook) svn co http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH/ svn: OPTIONS of 'http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH': Could not read status line: connection was closed by server (http://anonsvn.internet2.edu)

  Read the article

• Prevent applications from being run as administrator

  - by Unsigned

  Background Most installation toolkits have the ability to launch, automatically or otherwise, external programs after installation. This is often appears in the installer via such options as "Show readme", or "Start program". Issue The problem is, many of these installers are poorly coded, and do not drop permissions appropriately, for example, opening the application's homepage in the browser... launching the browser with the installer's Administrative privileges, or a "High" UAC integrity level. This has the potential to open up security breaches, by opening up a webpage (and possibly browser addons), that are now running with elevated permissions. Question The question is: Is there a way to prevent certain applications (such as a web browser) from ever being launched with Administrative privileges, i.e., an automatic drop-privilege?

  Read the article

• Linux wireless disconnect every 20 minutes

  - by james

  My laptop uses CentOS 6.3 with kernel 2.6.32-279.el6.x86_64. My wireless adaptor is Intel Corporation Centrino Wireless-N 1000. My wireless connection always get off after about 20 minutes. The network applet shows the connection is still on with good signal strength, but I just cannot load any web pages even the configuration page of the wireless router. The problem will continue until I disable and reconnect the wireless. Other devices like my cell phone uses the same wireless network without the problem. Even yesterday I'm using the same laptop with Fedora 17 without this problem. I also searched the internet and someone said running services NetworkManager and network simultaneously may be a problem. But I cannot stop any one of them because: if I stop network and start NetworkManager, the network service will start automatically; if I stop NetworkManager and run network, it says "Device does not seem to be present, delaying initialization." when trying to bringing on the wireless. What shall I do to get rid of the problem? Thank you very much!

  Read the article

• Large recovery partitions

  - by Unsigned

  Is there any good reason as to why factory restore partitions are generally much larger than they need to be? Examples I have found in my own experience: Dell XPS laptop Partition: 13.67 GB Used: 6.68 GB Dell Inspiron laptop Partition: 14.7 GB Used: 7.2 GB Toshiba laptop Partition: 15.3 GB Used: 9 GB In all cases, shrinking the partition to only slightly more than the Used space had no ill effects on future factory restorations. Why the exorbitant amount of extra space, given that neither of the three computers ever writes any data to the recovery partition? Is there a good reason I'm overlooking?

  Read the article

• How does a frame retrieve the recipient's MAC address?

  - by Sarmen B.

  I am studying a Network+ book named All-in-one CompTia Network+ by Mike Meyers. In chapter 2 he talks about frames and how he represents them as canisters and the data within the frame contains the recipients mac address, senders mac address, data, and sequence number. What I don't understand is if the sender is sending a file via the network to the recipient, and this frame contains this data, how does the frame know what the recipients MAC address is before sending it? In regards to TCP/IP when it contains the recipients IP address, that's understandable how it retrieves that value. But I don't understand how it can retrieve the MAC address, because if that frame comes from the senders computer, goes into the router and copies itself to each and every computer that exists on the network, how did it have the MAC address to know where to go? Let me know if I'm not making sense.

  Read the article

• Python module: Trouble Installing Bitarray 0.8.0 on Mac OSX 10.7.4

  - by Gabriele

  I'm new here! I have trouble installing bitarray (vers 0.8.0) on my Mac OSX 10.7.4. Thanks! ('gcc' does not seem to be the problem) Last login: Sun Sep 9 22:24:25 on ttys000 host-001:~ gabriele$ gcc -version i686-apple-darwin11-llvm-gcc-4.2: no input files host-001:~ gabriele$ Last login: Sun Sep 9 22:18:41 on ttys000 host-001:~ gabriele$ cd /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/bitarray-0.8.0/ host-001:bitarray-0.8.0 gabriele$ python2.7 setup.py installrunning install running bdist_egg running egg_info creating bitarray.egg-info writing bitarray.egg-info/PKG-INFO writing top-level names to bitarray.egg-info/top_level.txt writing dependency_links to bitarray.egg-info/dependency_links.txt writing manifest file 'bitarray.egg-info/SOURCES.txt' reading manifest file 'bitarray.egg-info/SOURCES.txt' writing manifest file 'bitarray.egg-info/SOURCES.txt' installing library code to build/bdist.macosx-10.6-intel/egg running install_lib running build_py creating build creating build/lib.macosx-10.6-intel-2.7 creating build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/__init__.py -> build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/test_bitarray.py -> build/lib.macosx-10.6-intel-2.7/bitarray running build_ext building 'bitarray._bitarray' extension creating build/temp.macosx-10.6-intel-2.7 creating build/temp.macosx-10.6-intel-2.7/bitarray gcc-4.2 -fno-strict-aliasing -fno-common -dynamic -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -g -O2 -DNDEBUG -g -O3 -I/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c bitarray/_bitarray.c -o build/temp.macosx-10.6-intel-2.7/bitarray/_bitarray.o unable to execute gcc-4.2: No such file or directory error: command 'gcc-4.2' failed with exit status 1 host-001:bitarray-0.8.0 gabriele$

  Read the article

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• Modifying Google Search Plugin

  - by TimeTrap

  I want Google search results to default with a publish date. I'm trying to change the Google search plugin, but I'd be just as happy using a 3rd-party tool that does this. So I'm using Firefox 15.0.1 and I've tried changing {install dir}/searchplugins/google.xml, but Firefox is just ignoring these changes. For example, I'm adding the below in 3 places in google.xml, but nothing is happening: <Param name="cdr" value="cdr:1,cd_min:01/01/1900,cd_"/>

  Read the article

• Playing iPad to iPad Wifi games over PPTP VPN

  - by Pez Cuckow

  I'm trying to use a VPN to play iPad to iPad Wifi (Local) games over the internet. Normally you open the game on both iPad's, connect to the same Wifi point and they can "see" and speak to each other. I figure using a VPN I can put them both on the same network (either both on the VPN or one on the "real" network and one on the VPN). On my router I've set up PPTP VPN with the ip range 192.168.1.2-50, where the PC's on the real local network are assigned 192.168.1.100+ When I connect one of the iPads to the VPN, using an external WiFi network (BT Openzone) I can ping it as expected (from any machine on the local network). However the iPad's cannot "see" each other and none of the Wifi-Wifi games work. I've also tried connecting both iPad's to the same VPN, with the result the same. All machines on the local network (and those on the VPN) can ping the iPad's but none of the Wifi to Wifi games work. I've set both iPads to send all trafic over the VPN and if I check their external IP's they match that of the real network. Does anyone know how to fix this? And/or what is causing it? Or what further debug information I can provide? Note: I don't feel this is iPad specific so would prefer if this isn't moved to a Apple SuperUser equivalent

  Read the article

• How do I log out of Google Chrome on a shared computer?

  - by Christy

  I share my computer with someone who does not have a google account, I do not want them to be able to click on chrome and potentially access my saved data (ie. passwords/CC info). Everytime I attempt to logoff chrome (not my email, chrome itself), I only get the option to delete or change user. I just want my info off, do I have to delete my account each time or is there a way to just log my infomation off chrome?

  Read the article

• Unable to connect to FTP server using Filezilla with router in-between

  - by pkswatch

  While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

  Read the article

• Font scaling issue in win 7

  - by NewProger

  I have a problem with font scaling in Win 7. I tried to search but found no apparent solution to this. About the problem: It manifest itself in older games (from Win 95 era). For example I get this in "Demise rise of the kutan", and in some other games I don't get any errors but the fonts are completely out of place/alignment/size etc. Is there way to fix it so that I can run older programs/games?

  Read the article

• OpenVPN and Squid Setup troubleshooting

  - by Adam

  I am trying to setup squid to tunnel via openvpn so that I can just enter an Ip and port in my browser settings and use it as a US proxy. My server is a OpenVZ VM. Running into some issues: I setup openvpn using : http://safesrv.net/install-openvpn-on-centos/ as part of that guide I also ran: iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to-source Installed squid using this guide: http://www.server-world.info/en/note?os=CentOS_6&p=squid from that guide changed acl lan src 10.0.0.0/24 to acl lan src 10.8.0.0/24 Next, I went to my browser proxy settings and put - 10.8.0.1 in the HTTP field. Put the port I had setup in the squid config file and tried to load a page. Nothing connecting. Any help? What am I doing wrong?

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• Gmail as icon on Dock in os x

  - by aaaidan

  On Windows, I can add Gmail as a faux application to the Taskbar, by using something like "add to task bar" in the Wrench-Tools menu. This promotes it to appear as a native application in the task bar. I notice that the same menu item isn't there for Chrome on Mac - at least, not in the same place. I'm looking for a "Add to Dock" function. Can this be done on the OS X version of Chrome? If so, how? I'm sick of having my email client hanging out with the other browser tabs.

  Read the article

• exFAT to NTFS formatting troubles

  - by user1083734

  I recently ran a chkdsk on 2.5" 230GB SATA HDD but the plug was pulled before the end of the chkdsk and since then it wouldn't boot up. Deciding to scrap all data on the HDD (no longer needed it), I then fitted it into an external HDD caddy and (in diskpart) cleaned the disk, created new partition and volume and tried to format it to NTFS. It couldn't do this on long or short formats and so I went with the less-appreciated alternative - exFAT (I run Win7). It quick formats to exFAT fine but encounters errors during long format. At the moment it is exFAT. Of course I would really like it to be NTFS as I will probably need to use it on Win XP too. Could anyone suggest a method of trying to reformat to NTFS? Do you think that, when chkdsk was interrupted first time, the disk was corrupted and is irretrievable? I find this situation slightly odd, as it HAS formatted to exFAT and DOES seem to work when I copy files across! Also, I CAN use disk management console to create several partitions: e.g. a 50GB partition and then a large 180GB partition. The 50GB and WILL long-format to NTFS but the 180GB will not! I'm thinking hardware fault, but then I notice that it WILL format to exfAT! Much confusion!

  Read the article

• Archive format & tool for large amounts of data (50gb+)

  - by marcusstarnes

  I only realised this afternoon that the ZIP format has a limit of what appears to be around 20gb. I am trying to automate an archive process (using Automate) to zip/rar/whatever a collection of folders/files on one of my disks. It always appeared to bomb out with an incomplete archive at about 20gb. So I tried using WinRAR and doing it manually as a ZIP file, but it told me of the limit. So, I was wondering, what is a recommended zip format (and tool for accomplishing the task) for archiving up a large amount of data (around 50gb)?

  Read the article

• Inserting static current time in Excel

  - by Mike Cole

  I have a time log spreadsheet. I have a new sheet for each day. In each sheet, I have a transactional record of how my time was spent. When I start or end a task, I usually type in the time ("11:00 AM" for example). Is there a shortcut to inserting the current time into a field? I'm sure it can be done with a macro, but I'm not very knowledgeable about macros. I'd like to simply highlight a field and hit some sort of shortcut key to insert a static value of the current time. Thanks for any help!

  Read the article

• What's the best way to install software in Ubuntu?

  - by the0ther

  I'm new to Ubuntu and have been away from Linux for a while. I'm used to Windows and find this tedious on Linux but I want to give it a shot. My tendency is to prefer GUI tools over command-line, and Ubuntu is a distro that seems to cater to usability. I note it is based somewhat on apt-get which I've heard good things about. What's the best practise for installing apps on Ubuntu? Should I prefer to try my options in this order? Synaptic Package Manger apt-get on the command line .tar.gz files (old school)

  Read the article

• Remote Computer renting (moving my desktop to the cloud)

  - by Carl

  I would like to rent a remote computer, like a virtual Vista or Windows 7 desktop, and run everything on it and access it with RDP (fastest). It could be virtual (running on Xen or Hyper-V) and the price needs to be right. Windows 7 to Windows 7 has nice RDP offload feature and doing stuff in the cloud is fast. Anywhere I could rent something like that? I've been using Amazon and CloudLayer, but they are optimized for server versions of Windows.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14  | Next Page >