Monthly Archives

Articles indexed in March 2012

Page 113/239 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • CellC data card not recognized if I boot with it in

    - by Armien
    In 11.10 I find that I can connect to the internet via broadband connection successfully. The problem is that I cannot have the data card attached to the machine while the machine boots up. If I leave the data card in the machine during startup, the data card is not picked up and I then cannot connect to the internet. I must first boot up my machine, login, attach the data card into the usb port, wait so 30 seconds. The broadband connection name will then appear in the network dropdown at the top of the screen. An internet connect is now possible via broadband. Please let me know what must be done to fix this.

    Read the article

  • Get and install Nvidia GeForce 8400 GS driver

    - by williepabon
    Recently, I changed my OS kernel from 10.04 to 11.10 (bugs), but after doing it, the video driver for the 8400 GS disappeared (was there in 10.04). I worked out the same procedure I did to install it in 10.04, mainly, sudo apt-get --purge remove nvidia-current sudo apt-get --purge autoremove sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get -y install nvidia-current but it didn't work even though the commands seemed to install the driver without problems. Right now my machine is working with the standard drivers, as shown. williepabon@WP-WrkStation:~$ sudo lshw -C display [sudo] password for williepabon: *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:05:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:de000000-deffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:cc80(size=128) memory:dfc00000-dfc7ffff Any suggestions to correct the problem? Thanks

    Read the article

  • Fork bomb protection not working : Amount of processes not limited

    - by d_inevitable
    I just came to realize that my system is not limiting the amount of processes per user properly thus not preventing a user from dring a fork-bomb and crashing the entire system: user@thebe:~$ cat /etc/security/limits.conf | grep user user hard nproc 512 user@thebe:~$ ulimit -u 1024 user@thebe:~$ :(){ :|:& };: [1] 2559 user@thebe:~$ ht-bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory -bash: fork: Cannot allocate memory ... Connection to thebe closed by remote host. Is this a bug or why is it ignoring the limit in limits.conf and why is not applying the limit that ulimit -n claims it to be? PS: I really don't think the memory limit is hit before the process limit. This machine has 8GB ram and it was using only 4% of it at the time when I dropped the fork bomb.

    Read the article

  • How to achieve 'Activities' in Unity?

    - by Ralf Hersel
    I like the concept of an activities centric desktop and I wonder if this can be achieved in Unity. For me, an activity is a couple of applications that belong to the same subject, like 'photo manipulation', 'software development', 'office work', 'social activities', 'music and video'. I would like to utilize the virtual desktops to arrange applications that belong to the same activity group. Example: Desktop 1 contains all applications that belong to 'office work' Desktop 2 contains all applications that I need for 'software development' Desktop 3 contains all applications that I usually need for 'photo works' Therefore I would like to give names to the virtual desktops that reflect their purpose. And I would like Unity to auto-start the required applications when I start my computer or when I switch to one of the virtual desktops. Is this possible with Unity (or any other desktop)?

    Read the article

  • Error while running unity_support_test

    - by Tojo Chacko
    My unity session won't start and it always gives me a segmentation fault. So I tried running /usr/lib/unity_support_test but this too gave me some error. X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 136 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 22 Current serial number in output stream: 22 What does this mean? Doesn't my machine satisfy unity's requirements?

    Read the article

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • Encrypted Home directory not auto mounting

    - by Valorin
    I somehow managed to break auto-mounting for my encrypted home directory. Every time I login via SSH, I see this: valorin@joshua:~$ ls -la total 44 dr-x------ 3 valorin valorin 4096 2012-03-17 17:10 . drwxr-xr-x 7 root root 4096 2012-03-17 11:45 .. lrwxrwxrwx 1 valorin valorin 56 2012-03-08 20:37 Access-Your-Private-Data.desktop -> /usr/share/ecryptfs-utils/ecryptfs-mount-private.desktop -rw------- 1 valorin valorin 917 2012-03-17 19:24 .bash_history drwx------ 3 valorin valorin 4096 2012-03-16 17:58 .cache lrwxrwxrwx 1 valorin valorin 33 2012-03-08 20:37 .ecryptfs -> /home/.ecryptfs/valorin/.ecryptfs -rw-r--r-- 1 root root 21954 2012-03-08 20:35 .face lrwxrwxrwx 1 valorin valorin 32 2012-03-08 20:37 .Private -> /home/.ecryptfs/valorin/.Private lrwxrwxrwx 1 valorin valorin 52 2012-03-08 20:37 README.txt -> /usr/share/ecryptfs-utils/ecryptfs-mount-private.txt -rw------- 1 root root 703 2012-03-17 17:10 .viminfo Any ideas what I've done, and how I can fix it?

    Read the article

  • sound stopped working after upgrade to 11.10 on Tuesday 20th March

    - by Hugh Barney
    My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

    Read the article

  • No internet access when I'm connect to my company's VPN

    - by Iago
    I googled my problem and I've read some questions in Ask Ubuntu, but I didn't solve my problem. I connect to a PPTP VPN server and it works well, but when I'm connected to that VPN I don't have Internet access but private network access. If I check "Use this connection only for resources on its network", I have Internet access, but this way I haven't access to my company's private network. What's the problem? Help, please.

    Read the article

  • How to unmount a virtual cd/dvd in Ubuntu 11.1o

    - by P J Reil
    I'm new to Ubuntu 11.10 and have absolutely no idea what I'm doing. I don't now how but in downloading and fooling around with a virtual cd/dvd program I seem to have inadvertently installed it. I had to shut down my computer for a while and when I re booted it all my files and my setup was gone. I have a brand new 11.10 setup with all the programs installed that I originally had but no files or bookmarks etc.. I'm not sure, but I think I'm running in a virtual cd/dvd. I don't know how to determine if I am or not and can't boot up in my original setup. Can anyone help me?

    Read the article

  • Ubuntu on Samsung NP700Z5B - no Grub

    - by copolii
    I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

    Read the article

  • How to find location of installed library

    - by Raven
    Background: I'm trying to build my program but first I need to set up libraries in netbeans. My project is using GLU and therefore I installed libglu-dev. I didn't note location where the libraries were located and now I can't find them.. I've switched to Linux just a few days ago and so far I'm very content with it, however I couldn't google this one out and becoming frustrated.. Is there way to find out where files of package were installed without running installation again? I mean if I got library xxx and installed it some time ago, is there somecommand xxx that will print this info? I've already tried locate, find and whereis commands but either I'm missing something or I just can't do it correctly.. for libglu, locate returns: /usr/share/bug/libglu1-mesa /usr/share/bug/libglu1-mesa/control /usr/share/bug/libglu1-mesa/script /usr/share/doc/libglu1-mesa /usr/share/doc/libglu1-mesa/changelog.Debian.gz /usr/share/doc/libglu1-mesa/copyright /usr/share/lintian/overrides/libglu1-mesa /var/lib/dpkg/info/libglu1-mesa:i386.list /var/lib/dpkg/info/libglu1-mesa:i386.md5sums /var/lib/dpkg/info/libglu1-mesa:i386.postinst /var/lib/dpkg/info/libglu1-mesa:i386.postrm /var/lib/dpkg/info/libglu1-mesa:i386.shlibs Other two commands fail to find anything. Now locate did it's job but I'm sure none of those paths is where the library actually resides (at least everything I was linking so far was in /usr/lib or usr/local/lib). The libglu was introduced just as example, I'm looking for general solution for this problem.

    Read the article

  • Network connection on an Acer Aspire 5253?

    - by fuquam
    Brand new to Ubuntu and PCs for that matter. I've been a Mac user all my life but wanted to try Ubuntu on the cheap, so I bought an Acer Laptop 5253-BZ893 and i got Ubuntu 10.10 installed with no problem. The only problem i have is, that i get no network connection options, wired or wireless. I just get No Network Devices Available. The computer came with Windows 7 installed and i am able to connect to my wireless network fine using Windows, so i know the computer works. Also i've been searching forums and google for hours trying to figure out why I can't get a network connection in Ubuntu but so far no luck. Any suggestions? Thanks in advance.

    Read the article

  • Bash command history not working

    - by user12663
    The command history between sessions is not getting saved. I'm using guake and the history for the session is working fine. I noticed that .bash_history had some commands I executed in sudo -s mode and tried the same again and all the commands while in the session got saved so I tried chmod 777 .bash_history Now the old commands appear at the start of a session but no new commands are getting saved Thanx in advance

    Read the article

  • using Moniker.com's nameservers

    - by user7519
    I have a VPS with A2Hosting for which i need to upgrade the OS. However, they've changed their VPS packages and forced me to order a new one. I went with an "unmanaged" package and have only just realised that they do not provide any DNS service at all, not even nameservers. Support tells me that "since your domain is not hosted with us, but with Moniker, you would not be able to use these nameservers. Your domain registrar should have a set of default nameservers that you can use, then create a A record to point to" my IP address. Moniker does provide for using their nameservers but i'm confused about which "pre-defined zone configuration" to use. They are: Domain Parking Domain Parking with Email Forwarding URL and Email Forwarding URL Forwarding URL Forwarding & CoolHandle Email I just want to use their nameserver and then create A & MX records pointing to the VPS. What do they mean by forwarding? I get the feeling it's a service that i don't want. Or, is it that i need to have a pre-defined zone only temporarily, and THEN set the A & MX? Which of these should i choose.

    Read the article

  • How can I set the default page for an https request?

    - by Rachel
    We have a website which has a Virtual Directory containing the secure portion of the website. If users come to http://www.mydomain.com, they should get directed to default.aspx of the main site, but if they go to https://www.mydomain.com, they should go to default.aspx of the virtual directory. The default page for the main site works fine, however I can't figure out how to set the default page for https traffic. Right now going to https://www.mydomain.com simply gives me a Page Not Found error. How can I set this up in IIS on Windows Server 2003?

    Read the article

  • Dedicated Servers: Is one better then two for LAMP pseudo HA setup? [closed]

    - by bikedorkseattle
    Possible Duplicate: How to find web hosting that meets my requirements? I know there are zillions of commentary about hosting out there, but I haven't read much about this. Our current well known host is having too many problems, the hardware we are on it subpar, and I'm ready to leave. A day of downtime can cost as much as our monthly hosting bill. A month of bad performance is just killing us right now, user and google wise. I'm wondering about running two dedicated boxes for LAMP, one running as the primary Nginx/Apache (proxy pass), and the other as the MySQL box. Running a single box scares the bejesus out of me because who knows how long it will take anyone to fix a raid card or whatever. The idea is to set this up using some sort of failover system using pacemaker and heartbeat. If one server goes down the other can take over for the other running both web and db. There are some good articles over at Linode about this. I have a few DBs that are 1GB+ and would like to load them into memory. Because of this, I'm shying away from a Linode HA setup because for the price I could do it with two dedicated like I described. Am I mad or an idiot? What are people out there doing for pseodu high availability good performance setups under $400/month? I'm a webmaster; I do a lot of things none of it that well :)

    Read the article

  • Can this navigation be done completely in CSS [migrated]

    - by atrljoe
    I am a little stuck. I have created almost everything in the picture below. What I am stuck on is I am trying to figure out how I would set it up so that when a user clicks one of the links it makes the line below become red (after the next page loads). Obviously I would need to use Jquery to detect the page then add inline css, but what I am struggling with is I want this to be as easy as possible so that I can give this template to others and then they can add or remove items as necessary. I was trying to figure out if I could somehow use a li element to do this but I have not found a way yet. Does anyone have any ideas to help me?

    Read the article

  • Ajax does not send the data to my php file [migrated]

    - by Mert METIN
    I try to send my data to php file but does not work. This my ajax file var artistIds = new Array(); $(".p16 input:checked").each(function(){ artistIds.push($(this).attr('id')); }); $.post('/json/crewonly/deleteDataAjax2', { artistIds: artistIds },function(response){ if(response == 'ok') alert('dolu'); elseif (response == 'error') alert('bos'); }); and this is my php public function deleteDataAjax2() { extract($_POST); if (isset($artistIds)) $this->sendJSONResponse('ok'); else $this->sendJSONResponse('error'); } However, my artistIds in php side is null. Why ?

    Read the article

  • Are there advantages of using hard coded URLs for localization?

    - by nbolton
    On the Synergy website, localization is detected (and can be overridden) but uses the same URL for all languages. Some websites however, like Wikipedia have language specific subdomains. What are the advantages of having either subdomains or subdirectories (i.e. a specific URL) for each language localization? Also, should it automatically redirect the user to the specific subdomain/subdir based on the language that the browser requests? I suspect that there are advantages, which I'm guessing are: When the website appears in search results for non-English languages, the translated page description will be shown (assuming there is a translation provided by the website). When a user shares a page (e.g. through twitter), it will show in a specific language. Perhaps this is a disadvantage though? Am I correct, if so, are there more advantages?

    Read the article

  • Cloning a game and releasing the source

    - by Manux
    I'm not really aware of the legal issues surrounding game clones. I'm around halfway done of making a clone, but it's not just the same gaming concepts, I'm literally using the original game's files (which I do not intend to distribute in any way) in my clone. My original intention was to add features to the game (Firefly studios's first Stronghold) while still using the same art. Is it ok to distribute the source of my clone?

    Read the article

  • How can I apply different actions to different parts of a 2D character?

    - by Praveen Sharath
    I am developing a 2D platform game in Java. The player has a gun in his hand every time. He needs to walk and shoot with the gun(arrow keys for walk and X key to shoot). The walk cycle takes 6 frames and i am able to import the sprite sheet and animate the sequence when I press arrow key. But i need to add the gun motion. The player holds the gun upwards and when X key is pressed he brings it straight and shoots. How to implement the walk + shoot action?

    Read the article

  • How can I clear explosions in my function?

    - by hustlerinc
    Hi I have a function to place bombs, and a for loop that places explosions on the tiles where possible. My problem is that I can't remove the explosions after a while. I've tried everything I can come up with so now I turn here as a last resort. The function looks like this: function Bomb(){ var placebomb = false; if(placeBomb && player.bombs != 0){ map[player.Y][player.X].object = 2; var bombX = player.X; var bombY = player.Y; placeBomb = false; player.bombs--; setTimeout(explode, 3000); } function explode(){ var explodeNorth = true; var explodeEast = true; var explodeSouth = true; var explodeWest = true; map[bombY][bombX].explosion = 1; delete map[bombY][bombX].object; for(i=0;i<=player.bombRadius;i++){ if(explodeNorth && map[bombY-i][bombX]){ if(!map[bombY-i][bombX].wall){ if(!map[bombY-i][bombX].object){ map[bombY-i][bombX].explosion = 1; } else var explodeNorth = false; delete map[bombY-i][bombX].object; map[bombY-i][bombX].explosion = 1; } else var explodeNorth = false; } if(explodeEast && map[bombY][bombX+i]){ if(!map[bombY][bombX+i].wall){ if(!map[bombY][bombX+i].object){ map[bombY][bombX+i].explosion = 1; } else var explodeEast = false; delete map[bombY][bombX+i].object; map[bombY][bombX+i].explosion = 1; } else var explodeEast = false; } if(explodeSouth && map[bombY+i][bombX]){ if(!map[bombY+i][bombX].wall){ if(!map[bombY+i][bombX].object){ map[bombY+i][bombX].explosion = 1; } else var explodeSouth = false; delete map[bombY+i][bombX].object; map[bombY+i][bombX].explosion = 1; } else var explodeSouth = false; } if(explodeWest && map[bombY][bombX-i]){ if(!map[bombY][bombX-i].wall){ if(!map[bombY][bombX-i].object){ map[bombY][bombX-i].explosion = 1; } else var explodeWest = false; delete map[bombY][bombX-i].object; map[bombY][bombX-i].explosion = 1; } else var explodeWest = false; } } player.bombs++; } } If anyone can think of a good way to remove the explosion after a delay please help.

    Read the article

  • Can't get LWJGL lighting to work

    - by Zarkonnen
    I'm trying to enable lighting in lwjgl according to the method described by NeHe and this post. However, no matter what I try, all faces of my shapes always receive the same amount of light, or, in the case of a spinning shape, the amount of lighting seems to oscillate. All faces are lit up by the same amount, which changes as the pyramid rotates. Concrete example (apologies for the length): Note how all panels are always the same brightness, but the brightness varies with the pyramid's rotation. This is using lwjgl 2.8.3 on Mac OS X. package com; import com.zarkonnen.lwjgltest.Main; import org.lwjgl.opengl.Display; import org.lwjgl.opengl.DisplayMode; import org.lwjgl.opengl.GL11; import org.newdawn.slick.opengl.Texture; import org.newdawn.slick.opengl.TextureLoader; import org.lwjgl.util.glu.*; import org.lwjgl.input.Keyboard; import java.nio.FloatBuffer; import java.nio.ByteBuffer; import java.nio.ByteOrder; /** * * @author penguin */ public class main { public static void main(String[] args) { try { Display.setDisplayMode(new DisplayMode(800, 600)); Display.setTitle("3D Pyramid"); Display.create(); } catch (Exception e) { } initGL(); float rtri = 0.0f; Texture texture = null; try { texture = TextureLoader.getTexture("png", Main.class.getResourceAsStream("tex.png")); } catch (Exception ex) { ex.printStackTrace(); } while (!Display.isCloseRequested()) { // Draw a Triangle :D GL11.glClear(GL11.GL_COLOR_BUFFER_BIT | GL11.GL_DEPTH_BUFFER_BIT); GL11.glLoadIdentity(); GL11.glTranslatef(0.0f, 0.0f, -10.0f); GL11.glRotatef(rtri, 0.0f, 1.0f, 0.0f); texture.bind(); GL11.glBegin(GL11.GL_TRIANGLES); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(0.0f, 1.0f); GL11.glVertex3f(0.0f, 1.0f, 0.0f); GL11.glTexCoord2f(-1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glTexCoord2f(1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glEnd(); GL11.glBegin(GL11.GL_QUADS); GL11.glVertex3f(1.0f, -1.0f, 1.0f); GL11.glVertex3f(1.0f, -1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, -1.0f); GL11.glVertex3f(-1.0f, -1.0f, 1.0f); GL11.glEnd(); Display.update(); rtri += 0.05f; // Exit-Key = ESC boolean exitPressed = Keyboard.isKeyDown(Keyboard.KEY_ESCAPE); if (exitPressed) { System.out.println("Escape was pressed!"); Display.destroy(); } } Display.destroy(); } private static void initGL() { GL11.glEnable(GL11.GL_LIGHTING); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); GLU.gluPerspective(45.0f, ((float) 800) / ((float) 600), 0.1f, 100.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glLoadIdentity(); GL11.glEnable(GL11.GL_TEXTURE_2D); GL11.glShadeModel(GL11.GL_SMOOTH); GL11.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GL11.glClearDepth(1.0f); GL11.glEnable(GL11.GL_DEPTH_TEST); GL11.glDepthFunc(GL11.GL_LEQUAL); GL11.glHint(GL11.GL_PERSPECTIVE_CORRECTION_HINT, GL11.GL_NICEST); float lightAmbient[] = {0.5f, 0.5f, 0.5f, 1.0f}; // Ambient Light Values float lightDiffuse[] = {1.0f, 1.0f, 1.0f, 1.0f}; // Diffuse Light Values float lightPosition[] = {0.0f, 0.0f, 2.0f, 1.0f}; // Light Position ByteBuffer temp = ByteBuffer.allocateDirect(16); temp.order(ByteOrder.nativeOrder()); GL11.glLight(GL11.GL_LIGHT1, GL11.GL_AMBIENT, (FloatBuffer) temp.asFloatBuffer().put(lightAmbient).flip()); // Setup The Ambient Light GL11.glLight(GL11.GL_LIGHT1, GL11.GL_DIFFUSE, (FloatBuffer) temp.asFloatBuffer().put(lightDiffuse).flip()); // Setup The Diffuse Light GL11.glLight(GL11.GL_LIGHT1, GL11.GL_POSITION, (FloatBuffer) temp.asFloatBuffer().put(lightPosition).flip()); // Position The Light GL11.glEnable(GL11.GL_LIGHT1); // Enable Light One } }

    Read the article

  • What is causing this behavior with the movement of Pong Ball in 2D? [closed]

    - by thegermanpole
    //edit after running it through the debugger it turned out i had the display function set to x,x...TIL how to use a debugger I've been trying to teach myself C++ SDL with the lazyfoo tutorial and seem to have run into a roadblock. The code below is the movement function of my Dot class, which controls the ball. The ball seems to ignore yvel and moves with xvel to the bottom right. The code should be pretty readable, the rest of the relevant facts are: All variables are names Constants are in caps dotrad is the radius of my dot yvel and xvel are set to 5 in the constructor The dot is created at x and y equal to 100 When I comment out the x movement block it doesn't move, but if i comment out the y movement block, it keeps on going down to the right. void Dot::move() { if(((y+yvel+dotrad) <= SCREEN_HEIGHT) && (0 <= (y-dotrad+yvel))) { y+=yvel; } else { yvel = -1*yvel; } if(((x+xvel+dotrad) <= SCREEN_WIDTH) && (0 <= (x-dotrad+xvel))) { x +=xvel; } else { xvel = -1*xvel; } }

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >