Daily Archives

Articles indexed Saturday October 6 2012

Page 12/14 | < Previous Page | 8 9 10 11 12 13 14  | Next Page >

• Why is my system using port 4?

  - by Kathleen

  I have Windows 7 and have noticed that my system is using port 4 to connect to a lot of different IP addresses. When it connects to them it is not for very long before it moves to another IP address. One night I sat and wrote down as many as I could and started checking whois to see where they were and they were from all over the world. I don't understand this. When I did a search on the net with this question. The only info I could come up with was, that port 4 is used by the US Army and a list of port assignments listed it as "unassigned". If anyone has any clues to what is going on... I would greatly appreciate any info I could get.

  Read the article

• Rosetta Stone Network V3 doesn't recognize built-in microphone in OSX Lion

  - by zarose

  I am using Rosetta Stone Network V3 on an early 2011 MacBook Pro running OSX Lion 10.7.3. When I log in, select a language and level, and then a lesson, I am prompted to select a microphone. The built in microphone doesn't show up, yet I've used it multiple times for other applications. I heard from another user that it doesn't work if headphones with a built-in microphone are used. I have not yet tried a USB microphone. Is there some free work around to this? I would prefer to not have to buy a USB microphone, but if that is the only solution, then I'll live. Edit: I noticed that Rosetta Stone tells me that if I don't have a microphone I should disable speech to move on, but that option is grayed out for me.

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• MS Word 2007 Mail Merge fails on ZIP codes with leading Zeros (eg. 01234)

  - by Pretzel

  I have an Excel Spreadsheet with a ZIP code column. For some dumb reason the original spreadsheet I got had all the zip codes stored as numbers, so a ZIP code like 01234 was stored as 1234. Easy to fix with "Format Column" as "Special = ZIP Code". All values like 1234, show up as 01234. Great! When I import it into Word via Mail Merge (to print address labels), the ZIP codes on all the addresses starting with a leading zero (like 01234) revert to their old form (1234). How do I fix this?

  Read the article

• The Most Useful Bookmarklets to Enhance Your Browsing Experience

  - by Lori Kaufman

  Bookmarklets are JavaScript links you can place on your browser’s toolbar that add one-click functionality to the browser or webpage. They are free and help make repetitive tasks in your browser quicker and easier to perform. Use bookmarklets to add functionality to your browser, such as modifying the appearance of a webpage, extracting data from a webpage, and search for highlighted text in a search engine or online encyclopedia. We’ve collected some links to useful bookmarklets here to enhance your browsing experience. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• OTBI vs. OBIA

  - by PRajkumar

    What are the differences between OTBI and OBIA?   OTBI -- Oracle Transactional Business Intelligence OBIA – Oracle Business Intelligence Applications   OBIA   1. OBIA is the pre-packaged BI Apps that Oracle has provided for several years. It is the data warehouse based Solution 2. It is based on the Universal data warehouse design with different prebuilt adapters that can connect to various source application to bring the     data into the warehouse 3. It allows consolidating the data from various sources to bring them together 4. It provides a library of metrics that help to measure business 5. It provides set of predefined reports and dashboards 6. OBIA works for multiple sources including E-Business Suite, PeopleSoft, JDE, SAP and FUSION Applications    OTBI 1. It is a real time BI 2. There is no warehouse or ETL process for OTBI 3. It is a Fusion Apps only 4. OTBI leveraging the advanced technologies from both BI platform and ADF to enable the online BI queries against database directly 5. OTBI does not have prebuilt dashboards and reports like OBIA   Note: Both OTBI and OBIA are available from same metadata repository. Some of the repository objects are shared between OTBI and OBIA. It was designed to allows to have following configuration:   OTBI Only OBIA Only OTBI and OBIA coexist    Both OTBI and OBIA are accessing Fusion Apps via the ADF

  Read the article

• Changing Filename Case with TortoiseSVN on Windows [migrated]

  - by Brad Turner

  I've been working on a development project using a Windows machine as a test server. Eventually, I'd like the "live" version to end up on a Linux machine. While trying to test on the Linux machine, it became apparent that I needed to change the case of several file names as Windows was case insensitive but Linux wasn't. When I changed the file name case in Windows, TortoiseSVN recognized that the file hand changed and marked my folders appropriately. However, when I tried to commit my changes, not only did TortoiseSVN tell me that no changes had been made, but it had actually reverted all of the file name changes I had made back to their original case. My question is, is there a simple way to alter the file name case from a Windows PC and have the changes appear in my repository? I'd like to avoid any kind of delete, commit, replace, commit scenario to keep my commits tidy if possible. Thanks!

  Read the article

• Calling methods on Objects

  - by Mashael

  Let's say we have a class called 'Automobile' and we have an instance of that class called 'myCar'. I would like to ask why do we need to put the values that our methods return in a variable for the object? Why just don't we call the method? For example: Why should we write: string message = myCar.SpeedMessage(); Console.WriteLine(message); instead of: Console.WriteLine(myCar.SpeedMessage());

  Read the article

• How does the GPL static vs. dynamic linking rule apply to interpreted languages?

  - by ekolis

  In my understanding, the GPL prohibits static linking from non-GPL code to GPL code, but permits dynamic linking from non-GPL code to GPL code. So which is it when the code in question is not linked at all because the code is written in an interpreted language (e.g. Perl)? It would seem to be too easy to exploit the rule if it was considered dynamic linking, but on the other hand, it would also seem to be impossible to legally reference GPL code from non-GPL code if it was considered static! Compiled languages at least have a distinction between static and dynamic linking, but when all "linking" is just running scripts, it's impossible to tell what the intent is without an explicit license! Or is my understanding of this issue incorrect, rendering the question moot? I've also heard of a "classpath exception" which involves dynamic linking; is that not part of the GPL but instead something that can be added on to it, so dynamic linking is only allowed when the license includes this exception?

  Read the article

• Java on Ubuntu server 12.04?

  - by Sean Dunwoody

  I'm a little confused at the moment. My back story in short, is that I'm trying to set up a Minecraft server on an Ubuntu server I've recently set up, obviously to do this I needed Java, but after googling for a short while I wasn't entirely sure whether it is possible (or legal?) to do so in Ubuntu 12.04 due to licensing type issues - so I installed open JDK instead which appears not to work properly with the Minecraft server software (I half expected this) I'm now considering uninstalling open JDK and instead trying to get proper Java on there instead, my question is, is this possible? Is it Legal? And if so how do I go about doing it? Because I'm finding it very difficult to find any instructions on how to do so for 12.04 . . .

  Read the article

• ubuntu 12.10 question?

  - by Arwyn

  im new here so sorry if I anoy you guys with hearing this question all the times :P anyway cut to the chase.... will this version of ubuntu (once finished) work on Raspberry PI? im just curious :P would be better to make it work on it so it would shut people up I guess :P and no I dont own a rasbperry pi :P just a reasearch person :P if ubuntu 12.10 will work on it I will save to buy one and give some monney to the ubuntu comp :P

  Read the article

• Get the following error when running Software Updater

  - by Curtis Cox

  W:Failed to fetch cdrom://Ubuntu 12.10 Quantal Quetzal - Beta i386 (20120926)/dists/quantal/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , W:Failed to fetch cdrom://Ubuntu 12.10 Quantal Quetzal - Beta i386 (20120926)/dists/quantal/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs , E:Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• unable to mount internal disk mount exited with exit code 13

  - by Masri

  My Ubuntu get into error when I try to mount one of my internal disks and it gives this error message: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 3). Failed to mount '/dev/sda7': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. pls advise how to solve above error ,Many thanks to you in advance.

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• Is there a way how to customize my keyboard layout in Xubuntu in a graphical way (by clicking)?

  - by Honza Javorek

  Possible duplicate, but I really couldn't find a solution. I would like to adjust my US keyboard layout, e.g. to add possibility to type some special characters on combination of right Alt + another character, etc. Moreover, my arrow up is dead, so until I buy another keyboard, I'd like to use my right shift as my arrow up, ASAP. However, there seems to be no way how to edit my keyboard layout easily in Xubuntu :( I found no editor and I really don't want to spend years in some configuration files and terminal (not that I can't, but I really really don't want). KLE - the only editor I could find, but no installation guide, no package, no PPA, no idea how to make it working (and uninstallable if not needed one day) Editor in Ubuntu - apparently not present in Xubuntu I found several tutorials how to change the layout, but they all seems to be complicated and not easy to follow. I don't want to spend a weekend in terminal or so, I am looking for an app to launch, make some clicking, finish my work by hitting Save button and - done! Please, is there such solution? For humans?

  Read the article

• Ubuntu install doesn't recognize kingston SSDnow sv 200 90g

  - by Quique Garcia

  I'm trying install Ubuntu 12.04 on my new Kingston SSD Now SVP200S3/90G, but the installer doesn't list this disk to be installed. However gparted let me do any partitioning operation correctly. I've tryed with Ubuntu Studio and Ubuntu Desktop on different machines: Lenovo ThinkPad T400, Lenovo ThinkStation C20, MoBo ASUS Crosshair V formula. SATA controller in all machines has been set to AHCI and IDE operation and different SATA ports with no luck. The firmware on the SSD has been updated to V.503xxx (latest on kingston page) Any help is appreciated, regards!

  Read the article

• computer doesn't boot from usb ubuntu installer when trying to install it alongside windows 7

  - by ali

  I'm very noob at linux and installing techniques. I want to install ubuntu 12.04 from bootable usb flash alongside windows 7 ( also tried live CD but now working ) but computer is not booting from usb flash or LIVE-CD and boots windows 7 ( acer aspire 4750g ). and of course I have set the bios priority in the right way. There is one important point to tell that I have installed Fedora 16 on my laptop successfully and now I have it on my system. when I was trying to install fedora i got some error and searched about it and got this point that I should delete a .efi file and then installation went right. In this case , what should I do to solve the problem? ( I also don't need my Fedora anymore )

  Read the article

• What utility is like Ten Clips, providing an enumerated clipboard?

  - by Aaron Newton

  A very useful (Windows) utility I use is TenClips - http://www.paludour.net/TenClips.html It allows you to create enumerated clipboards/emacs-like buffers easily using ctrl + f1, ctrl + f2, ctrl + f3, etc., copy to the clipboard in the first buffer, switch to the second buffer, copy without loosing our first buffer, switch back to the first buffer and paste, switch to the second buffer and paste and so forth. Does something like this exist for Ubuntu? The closest post I could find was Looking for an application that saves clipboard history which recommended Parcellite (http://parcellite.sourceforge.net/?page_id=2) - which keeps the history - but this is not quite what I'm after. If not I might make this a pet project :D

  Read the article

• apt-get upgrade stuck at the same package

  - by decibyte

  Current status I've started to suspect this is not an Ubuntu issue, but related to the internet connection here at my work. Until I'm sure, Im leaving my question below: Original question I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do? Update After following instructions in the answer by @lpanebr, it is now stuck at the linux-firmware package. So, maybe it's a more general problem than being related to specific package(s)? Although it did download some packages without problems before getting stuck at linux-firmware.

  Read the article

• Project Hamster notifications missing on upgrade to 12.04

  - by deshmukh

  I have upgraded from an almost default 11.10 install to 12.04. All went well and I can login, logout, etc. without any problem. One very interesting thing about the Project Hamster notifications, though. I have set Hamster to remind after every 27 mins. I do not get these notifications. However, if there is no activity set, I see the notification. In 11.10, I used to get both the notifications. What is wrong? How do I set it right? By the way, the notifications work quite well in Unity. But in Gnome, the problem continues.

  Read the article

• Is AdWords ad blocked from top spots of SERPs until it is reviewed?

  - by Omeoe

  I have an AdWords ad and a keyword with a Quality Score of 10. Inferring from CPC from actual clicks, max CPC is set way beyond that of the third advertiser from the SERP for this keyword (there are three ads in the top). Still the ad is shown on the 4th spot which located either on the right or at the bottom of the SERP. The only catch is that the ad's status is "under review". Is it the reason why it's blocked from the top spots?

  Read the article

• setting up freedns with an existing domain

  - by romeovs

  I've been running a webserver off of a pc at a static IP succesfully for the past 5 months. recently however, I've moved into another appartment and my ISP only provides a dynamic IP (my IP changes from time to time). I'm not an internet genius but I was thinking to fix this by using a Dynamic DNS provider. So I got on the web and found freedns. I'm a bit confused about how to set up everything though. I've managed to succesfully install the IP updater daemon on my web server. Then, in my registrars control panel, I set the NS records to point at ns1 through ns4.afraid.org (removing the old NS records). I'm not certain what I should do with the A records though (for now they are still pointing to the old static IP address). I have A records for www, blog, irc, etc. but I cannot point them at my new IP address, because it isn't Could someone explain this in the clearest possible sense (perhaps elaborating on what happens at each step of the DNS process). I never really knew what the A records are for anyway. (note that I haven't really found any documentation at the freedns website, or on google)

  Read the article

• rotate sprite and shooting bullets from the end of a cannon

  - by Alberto

  Hi all i have a problem in my Andengine code, I need , when I touch the screen, shoot a bullet from the cannon (in the same direction of the cannon) The cannon rotates perfectly but when I touch the screen the bullet is not created at the end of the turret This is my code: private void shootProjectile(final float pX, final float pY){ int offX = (int) (pX-canon.getSceneCenterCoordinates()[0]); int offY = (int) (pY-canon.getSceneCenterCoordinates()[1]); if (offX <= 0) return ; if(offY>=0) return; double X=canon.getX()+canon.getWidth()*0,5; double Y=canon.getY()+canon.getHeight()*0,5 ; final Sprite projectile; projectile = new Sprite( (float) X, (float) Y, mProjectileTextureRegion,this.getVertexBufferObjectManager() ); mMainScene.attachChild(projectile); int realX = (int) (mCamera.getWidth()+ projectile.getWidth()/2.0f); float ratio = (float) offY / (float) offX; int realY = (int) ((realX*ratio) + projectile.getY()); int offRealX = (int) (realX- projectile.getX()); int offRealY = (int) (realY- projectile.getY()); float length = (float) Math.sqrt((offRealX*offRealX)+(offRealY*offRealY)); float velocity = (float) 480.0f/1.0f; float realMoveDuration = length/velocity; MoveModifier modifier = new MoveModifier(realMoveDuration,projectile.getX(), realX, projectile.getY(), realY); projectile.registerEntityModifier(modifier); } @Override public boolean onSceneTouchEvent(Scene pScene, TouchEvent pSceneTouchEvent) { if (pSceneTouchEvent.getAction() == TouchEvent.ACTION_MOVE){ double dx = pSceneTouchEvent.getX() - canon.getSceneCenterCoordinates()[0]; double dy = pSceneTouchEvent.getY() - canon.getSceneCenterCoordinates()[1]; double Radius = Math.atan2(dy,dx); double Angle = Radius * 180 / Math.PI; canon.setRotation((float)Angle); return true; } else if (pSceneTouchEvent.getAction() == TouchEvent.ACTION_DOWN){ final float touchX = pSceneTouchEvent.getX(); final float touchY = pSceneTouchEvent.getY(); double dx = pSceneTouchEvent.getX() - canon.getSceneCenterCoordinates()[0]; double dy = pSceneTouchEvent.getY() - canon.getSceneCenterCoordinates()[1]; double Radius = Math.atan2(dy,dx); double Angle = Radius * 180 / Math.PI; canon.setRotation((float)Angle); shootProjectile(touchX, touchY); } return false; } Anyone know how to calculate the coordinates (X,Y) of the end of the barrel to draw the bullet?

  Read the article

• (int) Math.floor(x / TILESIZE) or just (int) (x / TILESIZE)

  - by Aidan Mueller

  I have a Array that stores my map data and my Tiles are 64X64. Sometimes I need to convert from pixels to units of tiles. So I was doing: int x int y public void myFunction() { getTile((int) Math.floor(x / 64), (int) Math.floor(y / 64)).doOperation(); } But I discovered by using (I'm using java BTW) System.out.println((int) (1 / 1.5)) that converting to an int automatically rounds down. This means that I can replace the (int) Math.floor with just x / 64. But if I run this on a different OS do you think it might give a different result? I'm just afraid there might be some case where this would round up and not down. Should I keep doing it the way I was and maybe make a function like convert(int i) to make it easier? Or is it OK to just do x / 64?

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

< Previous Page | 8 9 10 11 12 13 14  | Next Page >