Daily Archives

Articles indexed Friday November 2 2012

Page 12/15 | < Previous Page | 8 9 10 11 12 13 14 15  | Next Page >

  • Permission Mystery - apt-get and other system utilities have 000 permissions

    - by emteh
    I'm trying to track down this strange behavoir for years now. Always after installing software-updates the permissions of a lot of system-tools are broken as you can see below. I am reasonable convinced that the machine is not owned by someone else. Regular security updates + grsecurity kernel + pax + daily rkhunter runs. Besides that there is no incentive for an attacker to fiddle in such obvious ways with the system. I installed bastille linux (http://bastille-linux.sourceforge.net/) und tried to deinstall it later, so the problems could be related to that. However I don't see how this can happen in a regular way after updates. System: Ubuntu 10.04, recently updated to Ubuntu 12.04 but the problem persists. Apt-Configuration in /etc/apt/ looks sane to me. But nevertheless - could here be the source of the trouble? DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt || true";}; DPkg::Post-Invoke { "if [ -x /usr/bin/debsums ]; then /usr/bin/debsums -- generate=nocheck -sp /var/cache/apt/archives; fi"; }; // Makes sure that rkhunter file properties database is updated // after each remove or install only APT_AUTOGEN is enabled DPkg::Post-Invoke { "if [ -x /usr/bin/rkhunter ] && grep -qiE '^APT_AUTOGEN=.? (true|yes)' /etc/default/rkhunter; then /usr/share/rkhunter/scripts/rkhupd.sh; fi" } DPkg::Post-Invoke {"if [ -d /var/lib/update-notifier ]; then touch /var/lib/update- notifier/dpkg-run-stamp; fi; if [ -e /var/lib/update-notifier/updates-available ]; then echo > /var/lib/update-notifier/updates-available; fi "; }; Where do these chmod 000 come from? I'm feeling really uneasy with this problem. root@besen:~# find /usr/bin/ -perm 0 -ls 14721496 196 ---------- 1 root root 192592 Oct 15 11:58 /usr/bin/apt-get 14721144 68 ---------- 1 root root 63848 Sep 13 00:29 /usr/bin/gpasswd root@besen:~# find /usr/sbin/ -perm 0 -ls 1727732 92 ---------- 1 root root 86984 Sep 13 00:29 /usr/sbin/usermod 1727727 64 ---------- 1 root root 57640 Sep 13 00:29 /usr/sbin/userdel 1727719 64 ---------- 1 root root 57680 Sep 13 00:29 /usr/sbin/newusers 1727718 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/grpunconv 1727728 48 ---------- 1 root root 47088 Sep 13 00:29 /usr/sbin/groupadd 1727724 32 ---------- 1 root root 29584 Sep 13 00:29 /usr/sbin/pwunconv 19031620 84 ---------- 1 root root 81880 Jan 3 2012 /usr/sbin/edquota 14877113 48 ---------- 1 root root 46880 Sep 13 00:29 /usr/sbin/grpck 1727722 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/pwck 1727730 96 ---------- 1 root root 91464 Sep 13 00:29 /usr/sbin/useradd 19031619 16 ---------- 1 root root 14600 Jan 3 2012 /usr/sbin/quotastats 1727720 44 ---------- 1 root root 42760 Sep 13 00:29 /usr/sbin/groupdel 1727733 36 ---------- 1 root root 34504 Sep 13 00:29 /usr/sbin/pwconv 19031621 80 ---------- 1 root root 77632 Jan 3 2012 /usr/sbin/rpc.rquotad 19030041 76 ---------- 1 root root 73600 Jan 3 2012 /usr/sbin/repquota 1727731 40 ---------- 1 root root 38624 Sep 13 00:29 /usr/sbin/grpconv 1727725 56 ---------- 1 root root 49472 Sep 13 00:29 /usr/sbin/vipw 1727723 64 ---------- 1 root root 57672 Sep 13 00:29 /usr/sbin/groupmod root@besen:~# find /sbin/ -perm 0 -ls 16760927 76 ---------- 1 root root 73464 Jan 3 2012 /sbin/quotaon Any tipps? I really can't pinpoint the problem in more detail. It happens after installing updates but I can't find no hooks in the dpkg/apt system.

    Read the article

  • Blade servers for vm?

    - by jason clark
    We're using VMware on a normal rack mounted server and considering getting another. I see these days I can pick blade enclosures and servers up for relatively low cost and see the term blade and vm mentioned quite a lot. So my question - how would a blade setup work with wmware - is the whole enclosure seen as one big machine and yhr more blades you add the more computing power/resources you get in VMware - or are the just x number of seperate servers? J

    Read the article

  • new cacti installation on ubuntu 12.04 64bit not graphing any data

    - by Dani Cela
    Hey guys i just installed cacti on a ubuntu 12.04 server and am having issues with any data showing up on my graphs. If i snmpwalk the certain OID it works. I have tailing on the cacti.log file and i see it polling the values correctly but nothing ever graphs. Is there anything i can check with regards to snmp or something in cacti that may be causing this to not work? I have already checked in my php.ini and have set the timezone, someone was mentioning that may cause issues.

    Read the article

  • SSRS reports print button missing in IE 8

    - by Will Sams
    Seems like this is broken again (http://serverfault.com/questions/177268/ssrs-report-unable-to-load-client-print-control and SQL 2008 SP2 RsClientPrint ActiveX - "Unable to load client print control"). We updated all of our Windows 7 clients last Friday and it looks like the mighty "Unable to load client print control" has returned since then. Anyone aware of possible problems with the latest batch of Windows Updates?

    Read the article

  • Hyper-V and custom resolution

    - by Thomas Levesque
    I know this question has been asked many times (here and on TechNet), and the answer is usually "use RDP". But apparently, RDP is now the only option, and it's what I'm using. My screen is an LCD TV with a resolution of 1360x768. Unfortunately, this resolution is apparently not supported; the closest I can get in a Windows 8 VM is 1366x768, and it adds scrollbars, which make it difficult to put the mouse in the corners to get at the start screen and charm bar... Smaller resolutions don't fill the screen, so it's also difficult to put the mouse in the corner. Is there a way to set a custom resolution to fit my screen exactly ? (note: I know it's not a Windows 8 problem, since I don't have this problem on my host machine which also runs Windows 8. I assume it's related to the display adapter used by Hyper-V, but there don't seem to be any options to change it)

    Read the article

  • Symantec Protection Suite Enterprise Edition

    - by rihatum
    We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) What Hardware would you recommend as a Server spec for the SQL server 16GB RAM, Dual XEON? d) What Hardware would you recommend as a Server spec for the MGMT Servers 16GB RAM each with DUAL xeon and sas disks? e) Also, how do you or would you recommend to protect these 4 servers (2 x SQL and 2 x MGMT Servers)? f) How would you recommend to store backups for these desktops? We do have a SAN and a NAS in our environment and we do have one spare DAS (Dell MD3000). If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks ! Rihatum

    Read the article

  • Appears to be "randomly" switching between the acl matched backend and the default backend

    - by Xoor
    I have HAProxy acting as a proxy in front of: An NGinx instance An in-house load balancer in front of multiple dynamic services exposed with socket.io (websockets) My problem is that from time to time my connections are proxied correctly to my socket.io cluster, and then randomly it fallsback to routing to NGinx which obviously is annoying and meaningless since NGinx isn't mean't to handle the request. This happens when requesting for URLs of the format : http://mydomain.com/backends/* There's an ACL in the HAProxy config to match the '/backends/*' path. Here's a simplified version of my HAProxy config (removed extra unrelated entries and changed names): global daemon maxconn 4096 user haproxy group haproxy nbproc 4 defaults mode http timeout server 86400000 timeout connect 5000 log global #this frontend interface receives the incoming http requests frontend http-in mode http #process all requests made on port 80 bind *:80 #set a large timeout for websockets timeout client 86400000 # Default Backend default_backend www_backend # Loadfire (socket cluster) acl is_loadfire_backends path_beg /backends use_backend loadfire_backend if is_loadfire_backends # NGinx backend backend www_backend server www_nginx localhost:12346 maxconn 1024 # Loadfire backend backend loadfire_backend option forwardfor # This sets X-Forwarded-For option httpclose server loadfire localhost:7101 maxconn 2048 It's really quite confusing for me why the behaviour appears to be "random", since being hard to reproduce it's hard to debug. I appreciate any insight on this.

    Read the article

  • Postfix won't pipe to PHP file through aliases file

    - by jfreak53
    I'm trying to pipe from postfix to a command. According to Postfix logs it worked, but when I check the command it didn't. This is a fresh postfix install. This is my alias file: # See man 5 aliases for format postmaster: root support: "| /usr/bin/php -q /var/www/pipe/pipe.php" I run sendmail [email protected] then type it and then on a separate line type . and it goes. I check the postfix log /var/log/mail.log and this is what it states: Nov 2 15:32:33 server3 postfix/local[13284]: 42C429E0B5: to=<[email protected]>, relay=local, delay=156, delays=156/0.01/0/0.05, dsn=2.0.0, status=sent (delivered to command: /usr/bin/php -q /var/www/pipe/pipe.php) So according to that it worked, but it doesn't. If I run echo 'text' | /usr/bin/php -q /var/www/pipe/pipe.php it does work just fine. Any ideas what I did wrong? I know piping is working, I originally checked it by running that command above WITHOUT the quotes, so just support: | /usr/bin/php -q /var/www/pipe/pipe.php What it did there was append my email header and all to the file pipe.php. So I know postfix was piping it, but when I put in the quotes it says it's going but it's not according to my script.

    Read the article

  • Setting up logging for a remote backup script

    - by Brian Dainis
    So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

    Read the article

  • Firewall predefined rule property cannot be modified

    - by Sami-L
    Using a stand alone Windows Server 2012 Standard edition (no Active Directory), I Tried to establish a simple remote desktop with a custom port number, but could not modify the port number in the Firewall inbound rule, when I open the inbound property I get the next message: "This is a predefined rule and some of its properties cannot be modified" I have tried to set it up like this: New rule - predifined drop down list - Remote Desktop - check mark rules - Allow the connection. but still get "This is a predefined rule and some of its properties cannot be modified" Thank you in advance.

    Read the article

  • Exchange 2010 Hub cannot deliver to Exchange 2007 Hub - "451 5.7.3 Cannot achieve Exchange Server authentication"

    - by Graeme Donaldson
    We have an existing Exchange 2007 server in Site A (exch07). I've installed an Exchange 2010 server in Site B (exch10). Both servers have the CAS, Mailbox and Hub roles. Messages sent via SMTP on exch10 which are destined for mailboxes on exch07 are queued with the "Last Error" reported in Queue Viewer as '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.' I've found that some people have resolved this by creating new Receive Connectors which are scoped specifically to apply to connections from the remote hub/s, but I have had no luck doing this. Specifically I created new receive connectors on both servers with the following settings: Remote IP = IP/s of remote server Authentication = "Transport Layer Security (TLS)" and "Exchange Server authentication" Permission Groups = "Exchange servers" and "Legacy Exchange Servers" This made no difference, I see the same error message. What am I missing? Update: We noticed that the Application log had this error message from MSExchangeTransportService: Microsoft Exchange could not find a certificate that contains the domain name exch07.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector exch10 with a FQDN parameter of exch07.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. It turns out that the default self-signed certificate was no longer enabled for the SMTP service for some reason. After enabling the self-signed certificate for SMTP, we no longer get the error in the event logs, but delivery is still failing with the same error message. Update 2: I put a mailbox on exch10 and attempted to deliver a message via SMTP on exch07 and I get the same error.

    Read the article

  • Postfix "loops back to myself" error on relay to another IP address on same machine

    - by Nic Wolff
    I'm trying to relay all mail for one domain "ourdomain.tld" from Postfix running on port 2525 of one interface to another SMTP server running on port 25 of another interface on the same machine. However, when a message is received for that domain, we're getting a "mail for loops back to myself" error. Below are netstat and postconf, the contents of our /etc/postfix/transport file, and the error that Postfix is logging. (The high bytes of each IP address are XXXed out.) Am I missing something obvious? Thanks - # netstat -ln -A inet Proto Recv-Q Send-Q Local Address Foreign Address State ... tcp 0 0 XXX.XXX.138.209:25 0.0.0.0:* LISTEN tcp 0 0 XXX.XXX.138.210:2525 0.0.0.0:* LISTEN # postconf -d | grep mail_version mail_version = 2.8.4 # postconf -n alias_maps = hash:/etc/aliases allow_mail_to_commands = alias,forward bounce_queue_lifetime = 0 command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 default_privs = nobody default_process_limit = 200 html_directory = no inet_interfaces = XXX.XXX.138.210 local_recipient_maps = local_transport = error:local mail delivery is disabled mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/local/man message_size_limit = 10240000 mydestination = mydomain = ourdomain.tld myhostname = ourdomain.tld mynetworks = XXX.XXX.119.0/24, XXX.XXX.138.0/24, XXX.XXX.136.128/25 myorigin = ourdomain.tld newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /etc/postfix recipient_delimiter = + relay_domains = ourdomain.tld relay_recipient_maps = sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtpd_authorized_verp_clients = $mynetworks smtpd_recipient_limit = 10000 transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 450 # cat /etc/postfix/transport ourdomain.tld relay:[XXX.XXX.138.209]:25 # tail -f /var/log/maillog ... Aug 2 23:58:36 va4 postfix/smtp[9846]: 9858A758404: to=<nicwolff@... >, relay=XXX.XXX.138.209[XXX.XXX.138.209]:25, delay=1.1, delays=0.08/0.01/1/0, dsn=5.4.6, status=bounced (mail for [XXX.XXX.138.209]:25 loops back to myself)

    Read the article

  • How to get HTTP preseed to work correctly on Ubuntu 10.04 LTS (Lucid)?

    - by netvope
    Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

    Read the article

  • USB HD Freezes Windows Explorer

    - by nfplee
    I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

    Read the article

  • Is Windows 8 Pro usable without activation?

    - by DzinX
    There seems to be little information about the way activation system works in Windows 8, especially for consumer versions of Windows (Core/Pro, not Enterprise). I already know that Microsoft now requires you to enter a key before even starting the installation process, and that it tries to connect to the Internet and activate this key as soon as possible. Sometimes, though, you don't have Internet connection when installing Windows 8. What then? Can you install Windows? Can you use it? What are the limitations? For how long can you keep your copy of Windows usable without activation?

    Read the article

  • XKB - remap arrow keys and preserve shift behaviour to select text

    - by dgirardi
    I realize arrow key remapping is an old problem, however I cannot seem to find a good solution that lets me select text with SHIFT + remapped keys as I would do with the vanilla arrow keys. For instance, if I remap Caps Lock to ISO_Level3_Shift and set xkb_symbols to read either key <AC08> { [ k, K , Down, Down] }; or key <AC08> { type="THREE_LEVEL", [ k, K , Down ] }; Pressing Shift+CapsLock+K will behave exactly as CapsLock+K (while Shift+Down behaves differently from Down alone). I had somewhat more success using higher level macro utilities and generating keyboard events (i.e. generate both the shift and the arrow keypresses); hoever that approach has a whole set of different problems - often the UI response to a simulated keypress is different from the "real" keypress, and there are performance problems as well - I can type faster than the thing can handle. Tl;dr; how can you shift-select using remapped arrow keys under X?

    Read the article

  • Full HD video playback acceleration with mplayer on Ubuntu Lucid

    - by pts
    I know that for an NVidia card I can sudo apt-get install nvidia-current mplayer, reboot, and then use mplayer -vo vdpau -vc ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau FILE.mkv to get accelerated video playback of H.264 and other codecs, so even full HD videos can be played back with only little CPU. (And there are many other options, e.g. XBMC also supports VDPAU.) But how do I get accelerated video playback if I have a recent ATI or Intel video card on Ubuntu Lucid? How do I figure out if my video card has acceleration built in? The solution has to work with mplayer or mplayer2. It's OK for me to recompile mplayer(2), but I'd prefer installing both the kernel and the X.org X server from a binary package repository.

    Read the article

  • Bitlocker folder encryption

    - by Razor
    My situation I know that bitlocker is meant to encrypt whole drives, but I have an hard drive that is already fully partitioned and containing data. I'd like to encrypt part of one partition, leaving the rest of the partition accessible. I would very much like to avoid programs like Norton partition magic (which resize/split partitions), because every time I used them I had problems with the data stored. Question Is there any way/builtin alternative/3rd party app that integrates with windows login to encrypt one subset of a partition? EDIT I heard horror stories about EFS, which is why I don't want to use it. Some highlights from that article: In fact I’ve only used EFS twice in the last ten years on my own computers and on both occasions I’ve lost files and documents. I therefore cannot recommend you ever encrypt your files with this Windows feature. Unfortunately, because of incompatibilities with some differing versions of EFS files can end up scrambled and unrecoverable.

    Read the article

  • How long is the Windows 8 activation period if I do not connect to the internet?

    - by Moab
    This is not a duplicate of this question, since the OP had already connected to the internet. I installed Windows 8 Consumer Retail and was not connected to the internet, and remain unconnected so it cannot automatically activate. How long can I use Windows 8 this way (never connected to the internet) and without activating the license? I want documentation links, not just an answer you think is true or read somewhere, back up any statements with clear documentation please. Answers related to Vista-W7 activation or commands used in Vista-W7 to check license status are not acceptable as Microsoft completely changed activation technologies for windows 8.

    Read the article

  • How to find video in Firefox cache?

    - by Alegro
    I'm trying to find youtube video (just watched) in Firefox cache folder, but I cant find the folder. win xp sp3 Firefox 16.1 I tried C:\Documents and Settings\eDIN\Local Settings\Application Data\Mozilla\Firefox\Profiles\xp44aixq.default\Cache Also C:\Documents and Settings\eDIN\Local Settings\Application Data\Mozilla\Firefox\Profiles\49mvq84u.default\Cache In this folder I found the png thumbnail of visited youtube page C:\Documents and Settings\eDIN\Local Settings\Application Data\Mozilla\Firefox\Profiles\49mvq84u.default\thumbnails But, there is no video file. I also searched all files and folders arround (Default user, All users...etc). There is only one win user.

    Read the article

  • pivot table / chart default sorting

    - by Prince Charming
    What is default sorting for excel 2010 pivot table and charts I have a "Year month Week" column in my data sheet which I am using as row label, excel pivot table renders it arbitrarily like in data sheet I have data in the following order 2010 October Week 1 2010 September Week 1 2010 September Week 2 2010 September Week 3 2010 September Week 4 but when I use this in pivot table it generates row labels as 2010 October Week 1 2010 September Week 3 2010 September Week 2 2010 September Week 4 2010 September Week 1 I want pivot table to show row labels exactly in the same order as it is in data sheet

    Read the article

  • Unable to delete a directory from NTFS drive: "Access is denied"

    - by EMP
    I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

    Read the article

  • DVI output only working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • How to avoid compressing compressed files

    - by Gzorg
    Most compression programs compress all files by default. But when archiving a folder containing already compressed files, there is no need to compress them a second time, such as archives, packed setup program, jpg, movies, mp3,.... Are there any compression programs that allow an arbitrary list of type of files to be stored while the others are still compressed ? It looks like Winrar can't. I expect this would be doable with tar+gz/bzip2 and some scripting in various ways. Edit : Winrar can

    Read the article

  • Top 10 Ways to Smash a Pumpkin

    - by Jason Fitzpatrick
    We’re fairly certain the guys at ThrashLab just put this video together for a chance to film themselves smashing things in slow motion. We’re completely OK with that. From the pedestrian to the down right reckless, the above video catalogs ten different ways to get rid of your leftover Halloween pumpkins. (We’re dying to know how they convinced the guy to volunteer for #3.) [via Neatorama] How To Play DVDs on Windows 8 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives?

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15  | Next Page >