Daily Archives

Articles indexed Friday November 30 2012

Page 12/15 | < Previous Page | 8 9 10 11 12 13 14 15  | Next Page >

• Can't ping some IP addresses in the same subnet (LAN) Windows 2011 Server

  - by Ricardo

  Hi I’m running in Windows Small Server 2011 server standard (192.168.1.108), it’s my dhcp and dns server too, but suddenly all other users can’t get internet. My gateway is 192.168.1.1. After a lots of tested I can saw that my server can’t get into the router (192.168.1.1), and also into some others computers, but some other computers answer the ping command. In fact the same computer with the IP 192.168.1.9 didn't answer, but with the IP 192.168.1.63, it response! I have no routers, firewall, vlans or anything that disallow the traffic between computers, in fact when I changed the server IP address (192.168.1.109), I be able to ping the other computers and gateway, but if a back to the 192.168.1.108 the trouble comeback. I hope you can help me with this issue Ricardo

  Read the article

• Server browser resolves localhost, but not server name

  - by user147795

  I have a 2008 R2 server that I recently installed Solarwinds on. It is running IIS V7.5. I got the Solarwinds site loaded into IIS, however I can't resolve it when using the server name. It will however resolve when I put http:// localhost into the browser. I have tried editing the Hosts file to no avail. I have also played around with our DNS server to see if I can figure anything out there. I mess with the bindings in IIS, when I remove the binding for "localhosts" it stops resolving. But still get DNS lookup failed if I add the actual server name to the binding. Any ideas?

  Read the article

• Windows 2008 R2 DHCP Overlapping Scopes

  - by Buska

  We are trying to troubleshoot a scope overlap problem. We have multiple device types we wish to give all different ranges of a 16 bit subnet. IE. X device we wish to give 192.168.2.1-192.168.2.254/16, Y devices we wish to give 192.168.3.1-192.168.3.254/16. We are trying to accomplish this by creating different scopes and using the 60 class identifier. The problem is DHCP won't allow us to give these scopes with 16 bit masks because of the potential overlap. We aren't overlapping the address pool so why does DHCP care and can we work around this? If this isn't possible, how can i assign specific ranges by device type without creating multiple scopes? Any thoughts would be helpful. UPDATE: Entire Scope is 192.168.0.0/16 Gateway is 192.168.1.1/16 Device Hardware A - 192.168.20.1-192.168.20.254/16 Device Hardware B - 192.168.26.1-192.168.26.254/16 Device Hardware C - 192.168.85.1-192.168.85.254/16 We tried to setup multiple scopes for each device type (A,B,C) but couldn't specify a 16 bit mask as Scope A could technically overlap Scope B even thought our start and end addresses don't. I hope this makes more sense. Thanks for your thoughts.

  Read the article

• Cisco redundancy modes

  - by user974896

  I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

  Read the article

• ImportError: No module named _socket? WSGI Deployment into Apache

  - by Sxkaur

  I am using WSGI 3.3 for python 2.7.3 (32bit) for Apache 2.2. I got the binary WSGI from http://code.google.com/p/modwsgi/downloads/detail?name=mod_wsgi-win32-ap22py27-3.3.so. I have been trying to deploy an application but keep on receiving the ImportError: no module named _socket. I have included my wsgi and error logs. APACHE config: #LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule wsgi_module modules/mod_wsgi.so <Directory C:/Users/xxxxd/Documents/cahd> AllowOverride None Options None Order deny,allow Allow from all </Directory> WSGIScriptAlias / C:/Users/xxxxd/Documents/cahd/cahd/django.wsgi import os, sys sys.path.append('C:/Users/xxxxd/Documents) sys.path.append('C:/Users/xxxxd/Documents/cahd/') os.environ['DJANGO_SETTINGS_MODULE'] = 'cahd.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() The error was: [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] Traceback (most recent call last): [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1 ]File "C:/Users/xxxxd/Documents/cahd/django.wsgi", line 10, in <module> [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] import django.core.handlers.wsgi [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] File "C:\\django\\Django-1.4.1\\django\\core\\handlers\\wsgi.py", line 8, in <module> [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] from django import http [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] File "C:\\django\\Django-1.4.1\\django\\http\\__init__.py", line 11, in <module> [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] from urllib import urlencode, quote [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] File "C:\\Python27\\Lib\\urllib.py", line 26, in <module> [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] import socket [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] File "C:\\Python27\\Lib\\socket.py", line 47, in <module> [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] import _socket [Mon Nov 19 09:44:17 2012] [error] [client 127.0.0.1] ImportError: No module named _socket

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• Why do I need to add my application pool identity to the IIS_IUSRS group?

  - by smcolligan

  I'm setting up a .NET v4.0 web application on a Windows 2008 R2/IIS 7.5 server that uses a domain account for the application pool identity. When I access the site, I get the following error: The current identity () does not have write access to 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files' According to this: http://learn.iis.net/page.aspx/140/understanding-built-in-user-and-group-accounts-in-iis/ the identity of the worker process is added to the IIS_IUSRS group when the process starts. This seems to work fine for the existing .NET v2.0 applications I have running on the same server (I have not had to add their domain account application pool identities to IIS_IUSRS group). This does not seem to be the case for the first .NET v4.0 web application I'm setting up. Once I add the identity to the group, everything works fine. I suspect something is not configured correctly that is forcing me to do this. I would like to understand this before rolling out more sites/servers. Thanks in advance for your help...

  Read the article

• Linux mdadm software RAID 6 - does it support bit corruption recovery?

  - by user101203

  Wikipedia says "RAID 2 is the only standard RAID level, other than some implementations of RAID 6, which can automatically recover accurate data from single-bit corruption in data." Does anyone know if the RAID 6 mdadm implementation in Linux is one such implementation that can automatically detect and recover from single-bit data corruption. This pertains to CentOS / Red Hat 6 if those are different from other versions. I tried searching online but didn't have much luck. With SATA error rates being 1 in 1E14 bits, and a 2TB SATA disk containing 1.6E13 bits, this is especially relevant to preventing data corruption. Thanks!

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• High system cpu load (%sys), system locks

  - by Mark

  For the last two weeks we are having intermittent severe spikes in system cpu usage (shown as %sys), which last for maybe half a minute, locking most processes, including ssh. I've been trying to figure this out, but atop doesn't show anything relevant (system usage for processes it shows is insignificant), spikes are intermittent and I could not reproduce the spike using any workload for the web application this webserver hosts. If you have any ideas on how to debug high %sys and (sometimes) %si CPU usage, please share them. System specs (don't know if any of this is relevant): Dedicated server, CentOS 6, core i7 950, consistent 4 to 8 GB RAM free at any time, hard drives are in RAID-1. Additional info: dmesg output doesn't change between spikes /var/log/messages doesn't change between spikes Here is cat /proc/vmstat Here is output of mpstat 1 during a typical spike Add 07.11.11: looks like simple reboot restored system state, and we might never know what caused the disturbance in first place.

  Read the article

• Microsoft Web Farm Framework 502 error

  - by hermiod

  My apologies if this is a really stupid question, but I have installed and set up the new Microsoft Web Farm Framework in a UAT environment with a controller machine, a primary, and a secondary server. I have installed one of our in-house applications on to the primary server and it has been successfully provisioned across to the secondary. I have tried accessing the server via the url http:\mis-uat-002\testfarm\reviewer where mis-uat-002 is the name of the farm controller, testfarm is the name of the farm, and reviewer is the name of the application. When using this url I get a "502 - Web server received an invalid response while acting as a gateway or proxy server." error. If I access the application directly via http:\mis-uat-003\reviewer (mis-uat-003 is the primary farm server, reviewer is the application) then it works no problem. Is there some additional set up that needs to be done in order for the farm controller to do its job? It should be noted that this is a UAT environment so is not on a domain of any sort. However, if this was successful and the WFF came out with V1.0 fairly soon, we would be looking to run this on a Windows 2008 domain.

  Read the article

• Missing Memory on Windows Server 2008

  - by Chris Lively

  I have a windows 2008 x64 server with 8GB of RAM installed. Task Manager and Resource Monitor both insist that 7.5GB of the RAM is in use. However, the memory list under Processes (Memory Private Bytes) doesn't add up. I do have Show Processes from all users checked and hand adding the numbers I come up with about 3.5GB of RAM. I also looked at the latest copy of SysInternals Process Explorer. And neither the Private Bytes or Working Set adds up to more than about 3.5GB of RAM in use. What's going on? ===== Update: I bounced the server to see what would happen with the memory utilization. After boot and regular operations began it sat at 3GB of RAM usage. 18 hours later, it's back up to 6.8GB of usage with no indication as to where the additional 3.5GB or so of RAM is being used. Here are links to screen shots of the resource monitor and task manager: Resource Monitor Task Manager Update 2: Well, I believe I located the problem. When I detached one of the larger databases from my sql server the amount of ram shown as "in use" dropped drastically. The Memory Private Bytes count barely moved. So I'm guessing that SQL server has some way of allocating memory where it doesn't really show up in any of the monitors. I went further and created a new database file, then transferred all of the data from the one I detached. Even though it has the same data, and the same transactions going through it, the memory in use has stayed low. Maybe there was some corruption in the DB? I'll leave it to the DB gods and go searching for another "problem" ;)

  Read the article

• Windows 8: User profile service service failed the login. User Profile can not be loaded

  - by Ryanmt

  I removed accounts that were hosted on a separate drive before upgrading to windows 8 from 7 yesterday. However, now I get the User profile service service failed the login. User Profile can not be loaded. error whenever I try to access any new account. I've attempted it: from safe mode (suggestions here ) net user test \ADD Editing the permissions on the %sysdrive%\Users\Default folder to ensure it is readable Every attempt is met with the same error. Additionally, I do not see any new entries created in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry entry. I'm not sure I understand why a failed user creation wouldn't trigger an error... but that seems to be what is happening here.

  Read the article

• Is there anything essential to check before powering on a self-built PC for the first time?

  - by Nick F

  I've just put together a computer for the first time. I've found plenty of info online that covered the construction, but now I'm ready - I think - to power it up I'm wondering if there are any checks that I can do to be sure that the machine is safe and ready to turn on. What are the things (if any) that I absolutely must make sure of before turning on? Just to be clear, I'm sure there are many things I could get wrong that would mean the computer won't work properly, but only a few that might cause serious damage. It's really the latter I'm asking for.

  Read the article

• How to change the "record external input" in Fraps?

  - by CyanPrime

  I'm using a TV to USB capture thingy called Hauppauge USB-Live2 (http://www.hauppauge.com/site/products/data_usblive2.html) and I'm using Media Player Classic Home Cinema to view my device's output, and finally I'm using Fraps to record the output off of MPC. It all works nicely except I can't get my mic to record, or even show up in the "Record External Input" area of Fraps while my Hauppauge is plugged in. My question is: How can I select my mic as the "record external input" in fraps?

  Read the article

• map linux drives to windwos 7 for media stream over internet

  - by Ortix92

  I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

  Read the article

• AMD Processors and the Windows Phone 8 Emulator

  - by Aj Patel

  I would madly appreciate it if anyone in this community would help me with my question. The background is that I want to develop Windows Phone 8 applications but both of my current computer processors do not have Hardware Virtualization & Second Level Address Translation that are needed to run the Emulator. I have my eyes on an AMD computer g7-2243us (I like it because it has 1600x900 screen res). I looked up this Link that shows that this computer's AMD processor (Next Gen AMD Quad-Core A8-4500M Accelerated 1.9GHz up to 2.8GHz 4MB L2 Cache Processor) supports AMD-V Hardware Virtualization. So, will this computer be able to run the emulator? Thank you so much for your answers. I'm pretty sure it will run the emulator, but I just want to make sure before spending $400. Thank You all So Much.

  Read the article

• Where is the used memory in Task Manager & Resource Monitor coming from?

  - by Sam Adams

  On a Windows 7, the working set memory usage plus private memory does not add up to the total used memory in Task Manager and Windows 7 Resource Monitor. How do you find out where the used memory is coming from? The cached memory can't be part of it because sometimes the total cache is greater than the total in use. The commit memory plus the working set also doesn't add up to the total in use - but even that shouldn't be significant if it did, since commit is virtual.

  Read the article

• Different Headline Numbering for appendix

  - by k0pernikus

  I have two parts in a document, the first is a documentation, the second an appendix. Right now, I have follwoing structure: 1. Headline 1 1.1 Headline 2 2. Headline 1 3. Headline 1 1. Headline 1 (This shall be the appendix, I restarted the numbering) 1.1 Headline 2 Now I want to add a prefix, A, before the Appendix headline, so that I get this structure: 1. Headline 1 2. Headline 1 3. Headline 1 A1. Headline 1 A1.1 Headline 2 I know that I can define such a thing via Bullet and Numbering, yet there the appendix is defined for all the headlines. But I only want it for the actual appendix. How do I achieve such a thing?

  Read the article

• GPU Temperature comparisons between similar GPUs of the same line

  - by White Phoenix

  As a general rule of thumb, if there are two similar GPUs from the same line (i.e. an NVIDIA GTX 260 vs a NVIDIA GTX 280), will the less powerful or more powerful GPU run hotter? This is assuming all other factors stay the same - hardware configuration, cooling setup, ingame settings, etc. Or does this depend entirely upon the GPU itself? I do remember reading that the GTX 280 in this example was terribly inefficient with power and cooling.

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• How can I prevent frame breaking in Chrome from Google image searches, etc.?

  - by Nick T

  More often than not, websites with any number of images will use frame breaking scripts to lose Google Image Search's results frame (e.g. this relatively benign case). While I somewhat understand the reasons for doing so (as ineloquently put forth by these people), more often than not, such breakout/redirects dump me to a useless page that doesn't have the image I was looking for, plus it makes going "back" rather irritating as you need to click twice or more (some pages jam you through several redirects it seems) in rapid succession. Other than having reflexes to copy the 'Full-size image' hyperlink quicker than loading the breakout script, is there a way to get my actual result?

  Read the article

• UNMOUNTABLE BOOT VOLUME error on laptop with no CD Drive

  - by Menno

  I am getting the UNMOUNTABLE BOOT VOLUME error on my Samsung laptop which does not have a CD Rom drive. I tried to merge the C and D partitions to get more space but since then the laptop does not start up anymore. I dont care about the laptop, just about some pictures on there which I did not back up yet. I really hope someone can help me?!! I am a new user, so cant post pictures, but can send a screenshot if needed.

  Read the article

• Installing FreeNAS 8.3 problems

  - by osij2is

  I'm trying to install FreeNAS 8.3 on some desktop-level hardware (AMD Phenom + 890FX + 16GB) and I've been unsuccessful. I initially tried using a USB stick and followed the instructions on the FreeNAS site here. Making the USB was simple as the instructions laid out, but as soon as the USB is detected (during the boot process) some text appears and quickly vanishes and my machine reboots infinitely. After trying several different was to make the USB, I tried using a DVD-ROM but again, I had the same issue as the USB stick. This leads me to conclude that either a BIOS setting is incorrect but I have no idea which one. I've changed the BIOS to not "fast" boot per se, and I've correctly configured the boot order per USB stick and the DVD-ROM drive so I know that it's working. Have I missed anything that might be causing this problem? I'm not a FreeBSD/FreeNAS expert by any means.

  Read the article

• Can I use my Belkin router as a repeater?

  - by Kyle R

  I've got a brand new, unopened Belkin N600 DB router (yay 50% off sale), and I can't seem to figure out if I can use it as a repeater. As far as I can tell, it doesn't support DD-WRT or Tomato, but I'm wondering if there may be some way to rig it up to repeat Wifi. Also, I really need to know before I open it, because, being a bit tight on money at the moment, I'll probably sell it if I can't use it as a repeater. Finally, two caveats: I can't use the other wireless router for anything other than broadcasting straight from the modem (parents are paranoid about anything technological). I can't run ethernet to the second router due to the layout of the house. Thanks so much for the help everyone--if I'm being vague, tell me! EDIT: Also, the manual here is pretty useless on this topic as far as I can tell.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15  | Next Page >