Daily Archives

Articles indexed Tuesday December 11 2012

Page 13/16 | < Previous Page | 9 10 11 12 13 14 15 16  | Next Page >

• Why is MySQL unable to open hosts.allow/hosts.deny?

  - by HonoredMule

  I have a storage server running Nexenta (OpenSolaris kernel, Ubuntu userspace) with MySQL on top of a ZFS storage array, using innodb_file_per_table and ulimit -n set to 8K. mysqltuner.pl confirms the file limit and claims there are 169 files. The following command: pfiles `fuser -c / 2>/dev/null indicates one mysqld process having 485 file/device descriptors (and they're almost all for files) so I don't know how reliable the tuning script is, but it is still way less than 8K and this list also finds no other process which is close to it's limit. The global total number of descriptors in use is around 1K. So what can cause mysqld to be constantly streaming the following errors? [date] [host] mysqld[pid]: warning: cannot open /etc/hosts.allow: Too many open files [date] [host] mysqld[pid]: warning: cannot open /etc/hosts.deny: Too many open files Everything appears to actually be operating fine, but the issue is constantly flooding the admin console and starts right away on a fresh boot (not only reproducible, but always from mysqld and always the hosts files, whose permissions are the default -rw-r--r-- 1 root root). I could, of course, suppress it from the admin console but I'd rather get to the bottom of it and still allow mysqld warnings/errors to reach the admin console. EDIT: not only is the actual file descriptor well within sane limits, the issue also persists (with immediate appearance) even with the file limit raised to 65535 and always only on hosts.allow/deny.

  Read the article

• Chef command to create new ec2 instance with second ebs volume attached and mounted instead of the default ephemeral volume?

  - by runamok

  We currently use this command to create a new ec2 instance with chef: knife ec2 server create --node-name=prod-apache-1 --availability-zone us-east-1c --image ami-3d4ff254 --distro ubuntu12.04-gems --groups "default" --ssh-key foo --identity-file ~/.ssh/id_rsa --ssh-user ubuntu --flavor m1.small After this command we then run further chef commands to finish provisioning the server. I was wondering if it would be possible while first setting up the instance I wanted a 100 gb volume created and mounted at /mnt and to have the ephemeral storage mounted at /tmp or /mnt-ephemeral instead. If not what further commands in chef would you advise running? I know how to do this via the aws console and can probably figure out how to do it via the ec2 command line tools but I am knew to chef and a bit overwhelmed.

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• MySQL slave replication Seconds behind master increasing?

  - by geekmenot

  I started a MySQL slave using innobackupexand the Read_Master_Log_Pos: and the Relay_Log_Pos: are updating however the seconds behind master keeps on increasing (it's at Seconds_Behind_Master:496637 currently and increasing). Any ideas on how to fix this? mysql> SHOW SLAVE STATUS\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.8.25.111 Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.005021 Read_Master_Log_Pos: 279162266 Relay_Log_File: mysql-relay-bin.000004 Relay_Log_Pos: 378939436 Relay_Master_Log_File: mysql-bin.004997 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 378939290 Relay_Log_Space: 26048998487 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 497714 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 1 1 row in set (0.00 sec)

  Read the article

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• route53 for multiple identical domains

  - by Yaniv Aknin

  My main domain is example.com, but also bought example.org and example.net. I've configured my webservers at *.example.com to handle requests from the other domains and redirect them correctly to example.com, but I'd rather not re-configure all my DNS records at example.org and example.net to be the same as example.com. Other than writing some ugly synchronization script, what should I do to have route53 answer queries against my "other" domains with the same data from the "main" domain?

  Read the article

• What is the name of this screw? (from HP ProLiant quick-deploy rail kits)

  - by kockiren

  I need the name of the screw for the HP quick deploy rail kit. The screw clicks into the square holes of the rack. It is a Gen4 Rail kit but the screw is like the Gen8 Rail kit ones. I called HP support, but they couldn't really help me. Unfortunately the rack manual does not name this screw either. After googling a while, I found the compatible "Thumb Style Rack Screws". It would do the job but isn't exactly what I am looking for. So, what is the name of the pictured screw.

  Read the article

• Solaris 11.1 smb share pam.conf

  - by websta

  I would like to enable an SMB share on Solaris 11.1 x64 My steps: pkg install service/filesystem/smb svcadm enable -r smb/server echo "other password required pam_smb_passwd.so.1 nowarn" >> /etc/pam.conf useradd public smbadm enable-user public zfs set share=name=fs1,path=/rpool/fs1,prot=smb rpool/fs1 zfs set sharesmb=on rpool/fs1 passwd -r files public Step 8 failes: It is not possible to enter a password, output is: solaris passwd -r files public Please try again Please try again Permission denied If I uncomment the new line in pam.conf, it is possible to change the password. Nevertheless, it is not possible to access the share from Windows 7. The Solaris machine is reachable with ping. Access with another SMB enabled user is denied too.

  Read the article

• What is the Optimal Server Configuration for Split-Path Testing?

  - by doug

  I am far from an expert on Apache or any server for that matter, so i apologize if this question is poorly worded, which it likely is. We have always relied on a vendor for split-path testing (aka "AB Testing"). If you're not familiar with that term, it's a form of marketing research in which you slightly modify one of your web pages (usually one nearest the point of conversion), say for instance, by changing the position of the "Buy Now" button or its color/contrast/texture, then serving one of those two pages to a given user based on random selection. By doing split-path testing ourselves, I suspect we can do it far more cheaply and increase cycle times as well. What is the optimal set-up for these tests? "Optimal" is based on the following criteria: how quickly/easily new tests can be set-up and put online; and minimal disruption to overall site performance

  Read the article

• Why is my mouse randomly deselecting and unclicking?

  - by Coldblackice

  (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

  Read the article

• Services of virtual machines

  - by RredCat

  I am looking a way to establish dev machine on the cloud. I want to have access for development from different places. I don't want to play with sync brunch and so on. It would be Lubuntu with 1G or 512M memory and I want to have way to setup my image. What I have found in the current moment: Amazon EC2 service Azure Virtual Machines I am pretty sure that there should be more services like this. I hope to find one specified for this purpose. I have experience to work in such way and I like it. Unfortunately it was server of certain company for projects of this company and I can't use it for my private aims. Could anybody suggest me anything?

  Read the article

• Why doesn't the network drive not automatically connect?

  - by Sheldon

  I've set up samba on my Ubuntu desktop. It appears to be something to do with the server. With all user accounts on Ubuntu(except the default one I use all the time) windows isn't able to/doesn't automatically map the network drive. In other words: I am only able to to automatically map the network drive on windows with only one of the accounts created on Ubuntu. Edit: I am able to connect using other accounts, I'm just not able to automatically map using those credentials. Details: Windows 7, Ubuntu 12.10

  Read the article

• Laptop Overheating with Windows 8

  - by Dany Khalife

  I recently installed Windows 8 on my HP G62 Laptop and i have been noticing a very strange problem with it. Let alone, for lets say 5 minutes, without even touching it, it starts to heat up and it reaches about 60 degrees (Celsius) with absolutely no applications open (not just on desktop but overall). I dug in a little deep and found out that Maintenance was running when the computer was Idle, so i turned that off From the System's Task Scheduler, and while there i also turned off other services i did not need hoping that would solve the problem. So after a few days, i noticed that the average temperature of my laptop dropped from 55 to 48 degrees while working on Visual Studio. And when i thought the problem had disappeared, it still did show up, only not after 5 minutes, but more like 10 minutes... Here is what i have done so far: Replacing the thermal paste on the CPU and the fan and cleaning the fan (this was like 6 months ago) Using a laptop cooler Running a virus scan (i just formatted my laptop so it would be really weird if i already caught something but who knows) Right now, i believe it has something to do with my gfx driver (Even though it IS up to date, looking closely at the screen, i can see the pixels slowly refresh (kinda like watching static on TV) which i wasn't able to do on Windows 7. If you have any ideas, let me know. Thanks

  Read the article

• Windows 8, IIS8 how to make PHP imagick work

  - by Laci K

  I'm new to IIS server before IIS for 6 years I used Apache 2.X and with Apache imageMagick and its PHP module imagick worked just fine even with x64 version of PHP and Apache 2.4 and imageMagick. I tried to make imagick to work with IIS8 but it wont work. I always get the typical PHP startup warning in my log PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\iis express\PHP\v5.4\ext\php_imagick.dll' - %1 is not a valid Win32 application. in Unknown on line 0 And the next thing why is IIS loading php from IIS express folder if I have php in the program files? But actually I dont care until it works :) So what I did so far I unistalled imageMagick 6.7.X 64bit version and installed the latest x86 version, tested it in command line and it worked, than I looked up on net the latest imagick DLL which was I think the 3.1.0RC2 (founded here http://www.peewit.fr/imagick/) than I copied the dll to PHP's ext folder than edited php.ini and added the imagick to the dynamic extensions after that I restarted IIS and than nothing :( I got the error which I wrote earlier. Today I installed PEAR package Installer because I read somewhere that someone made it work with it but he also mentioned, that he needed to comply wincache too. Isn't there any easier solutions to make it work? Could someone maybe write me a step by step guide how to make this work.

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

• Windows 7 black screen after boot animation

  - by t_virus

  This is happening with my windows 7 64-bit install frequently. Today i was trying to install an icon pack. There was already a restore point prior to it so i didn't feel like create one. I replaced the following system files in both system32 and sysWOW64 imageres.dll imagesp1.dll zipfldr.dll and shell32.dll After a reboot i see windows boot animation and then a black screen (with no mouse) I let it like that for 10 minutes and the laptop automatically went to sleep mode. I wake it up and see an error box this error "interactive logon failed to initialize" I close it and i'm left with a black screen again, this time with a mouse though. I tried using automatic system repair. It just tells me to remove any extra hardware (i have none attached atm) System restore finishes successfully but doesn't fix the problem. Safe mode doesn't work either. same black screen after boot animation Can someone help me with this? Also, I'll be grateful anyone can upload those default files (listed above) for both system32 and sysWOW64 from a windows 7 64bit install (no service pack)

  Read the article

• Visual Studio 2012 intermittent lockup

  - by user1892678

  Visual Studio 2012 intermittently locks up on me. I notice that devenv.exe jumps to 50% CPU utilization. The CPU stays at this level for a few minutes and then drops. While its at 50% utilization I can still use the IDE. However, intermittently it stops responding (as though it was performing some sort of background process). It only lasts for a few seconds. Also this happens when debugging. I'm running under Windows 7 and I'm using Telerik controls. I've disabled add-ins and extensions and have had no success. Any ideas would be appreciated? Thanks

  Read the article

• USB-to-Serial showing gibberish at 115200 Baud

  - by Mose

  I've got a serious problem which drives me crazy because I tried everything I could think of. First of all, I made a video: http://youtu.be/boghkuq7L_s but please read the following text for more information, not only view the video! When using a USB-to-Serial interface everything works as long as I don't go beyond 57600 Baud. At higher rates I only get giberish like this: év.­b0JNLYÆÿ¿iëd0U²(kßÞb! ú]/xscB!ï¯!BoXûÿ1ïâÖCÿ6ÌAnè*íÌC)º¿BíÞØ.C.@ÆÃwHJÂs "YE:ñ.èFðÌCÊ÷ÞÄ !x H w6@BtbHJ ̪ Ì6ì H¾a¿bH.">îvy®;f<ßBÌ p­L¨fæH­E ­þ¼MBÞI What makes the problem so strange is, I exchanged every component and the problem still presists. I tried differtent OSes (Ubuntu, WinXP, Win7, OSX 10.7) with 32 and 64 Bit. I tried USB-to-Serial interface from FTDI and Prolific. I tried reading the output from my Raspberry PI and from an Asterisk Appliance. I changed the cables and the wiring. Nothing helped. In the video I made a example with a old Notebook with native COM and put the USB-to-Serial to the same connection as "sniffer" (only Rx and GND connected) to make sure the output and everything is ok as one can see on the native port. The voltage is ok. Settings for both are 115200 Baud, 8 Bit with 1 Stop and no flow control. Native is ok. USB is messed up. I used the newest drivers and double checked all connections. I have no idea what is wrong here. As I couldn't find anyone describing problems like this I question my long experiance in computer science and think I'm doing some completly wrong... Please help :-/

  Read the article

• How to unblock chm files - unblock button is missing

  - by Yoav

  I downloaded a CHM file. When I double click it it prompts me to open / save / cancel. Whether I open or save a new copy, the 'new' version will prompt the same open / save / cancel popup ad infinitum. Searching google it seems that Microsoft have deemed it right for security reason to block these files by default. The solution is to right click the file, and click the 'unblock' button at the bottom: The problem is that I don't have that button on my system: BTW, the button is also missing for .exe files.I'm using Win7 64bit. Any ideas?

  Read the article

• CHM e-book cover extraction

  - by Robottinosino

  I would like to extract a "book cover image" from a series of CHM files, which command line tool can do that, please? I have looked at the source of the QuickLook plug-in "quickchm1.1_source" and at the calibre command line conversion options (ebook-convert) but couldn't find anything akin to simple: name_of_tool file_to_convert output_image as in: mytool routermanual.chm routermanualcoverimage.png

  Read the article

• How to fix Truecrypt MBR using Command Prompt or Linux live USB?

  - by Michal Stefanow

  I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

  Read the article

• How to convert an CHM file into a single HTML file?

  - by ruslan

  I have tried many different CHM-to-HTML utilities, but I am having a difficult time finding one that is able to produce a single HTML file. I can decompile a CHM file using hh.exe, but I don't know how to easily merge the resulting files into a single HTML file, all while preserving the correct order of pages. Is there a free tool which can do this? If not, how can I merge the HTML files in order?

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do.

  Read the article

• Prevent Network Printers Automatically being added to 'Devices and Printers' in Windows 7

  - by Ben

  I think my question is a duplicate of this one, but the original question was never properly answered (the steps described are for Windows XP). I am aware of the option to "Turn off Network Discovery" (under Control Panel All Control Panel Items Network and Sharing Center Advanced sharing settings); I set this option (for both Home/Work and Private) but it doesn't seem to stop the printers getting added, and has the side effect of preventing me from browsing the list of machines on the network (which I need). I've tried the Windows XP registry option - but it doesn't seem to make any difference: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\NoNetCrawling I find it annoying having the printer list cluttered with printers from all over the office which I am never going to use (especially since lots of them no longer physically exist, users just haven't deleted them from their machines). This must be a real problem for people in massive offices with large numbers of printers - but I can't seem to find a lot of people complaining about it - which makes me think I'm missing something obvious. I don't really want to hack the firewall or turn off sharing completely, I still want to select and use network printers and file shares. Any ideas?

  Read the article

• Where can I legally download installation media for Microsoft Office 2007?

  - by khalid

  I have a license key for Microsoft Office 2007 Professional, but I don't have the media CD. I tried to download it from Microsoft's website but I couldn't find it. I found 1 link but the link is not valid anymore. I asked in a computer shop and they give me media for Office 2007, but not the Professional edition so my key doesn't work on it. Is there anywhere I can legally download installation media for Office 2007 Professional? Please i don't want torrent link

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16  | Next Page >