Monthly Archives

Articles indexed in June 2012

Page 134/464 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Is constantly looking for code examples a sign of a bad developer?

  - by Newly Insecure

  I am a CS student with several years of experience in C and C++, and for the last few years I've been constantly working with Java/Objective C doing app development and now I have switched to web development and am mainly focused on ruby on rails and I came to the realization that (as with app development , really) I reference other code way too much. I constantly Google functionality for lots of things I imagine I should be able to do from scratch and it's really cracked my confidence a bit. Basic fundamentals are not an issue, I hate to use this as an example but I can run through javabat in both java/python at a sprint - obviously not an accomplishment and but what I mean to say is I have a strong base for the fundamentals I think? I know what I need to use typically but reference syntax constantly. Would love some advice and input on this, as it has been holding me back pretty solidly in terms of looking for work in this field even though I'm finishing my degree. My main reason for asking is not really about employment, but more that I don't want to be the only guy at a hackathon not hammering out nonstop code and sitting there with 20 Google/github tabs open, and I have refrained from attending any due to a slight lack of confidence... Is a person a bad developer by constantly looking to code examples for moderate to complex tasks?

  Read the article

• grub recover command line

  - by Rakesh Mohan Hallen

  Recently the service provider link suddenly broke,while I was updating. Then suddenly while I was trying to boot, i could not. The message on my screen was grub recover missing, and I had no option but the grub recover command line. I really did not know what to do. So I installed an earlier version of ubuntu 10.04. It started to boot normally. Now my system is back to 12.04 the version i was working with. How does one handle problems like this?

  Read the article

• wordpress restored from backup asking for ftp

  - by Siddharth

  I backed up my /var/www/wordpress folder to my external harddisk and restored it back. Now when I add a new plugin I am asked for ftp access to my localhost. I wonder why ? As far as I could go /var/www/wordpress and its subfolders/files are own'ed by root. I have logged in to my wordpress as admin root. I dont know why I need to setup ftpd, but I tried that too. "http://askubuntu.com/questions/14371/how-to-setup-ftp-to-use-in-locally-hosted-wordpress" I am missing something really silly here.

  Read the article

• How to resolve "dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb"?

  - by raz7588

  Update Manager will not update although I have over 100 updates to do I get a error message like this: installArchives() failed: Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... Extracting templates from packages: 29%% Extracting templates from packages: 58%% Extracting templates from packages: 88%% Extracting templates from packages: 100%% Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 189751 files and directories currently installed.) Preparing to replace python-problem-report 2.0.1-0ubuntu7 (using .../python-problem-report_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-apport 2.0.1-0ubuntu7 (using .../python-apport_2.0.1-0ubuntu9_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace apport 2.0.1-0ubuntu7 (using .../apport_2.0.1-0ubuntu9_all.deb) ... apport stop/waiting Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already apport start/running Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace gnome-orca 3.4.1-0ubuntu0.1 (using .../gnome-orca_3.4.2-0ubuntu0.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace python-piston-mini-client 0.7.2-0ubuntu1 (using .../python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace oneconf 0.2.8 (using .../oneconf_0.2.8.1_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/oneconf_0.2.8.1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace software-center 5.2.2 (using .../software-center_5.2.2.2_all.deb) ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: warning: subprocess old pre-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Traceback (most recent call last): File "/usr/bin/pyclean", line 33, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error processing /var/cache/apt/archives/software-center_5.2.2.2_all.deb (--unpack): subprocess new pre-removal script returned error exit status 1 No apport report written because MaxReports is reached already Traceback (most recent call last): File "/usr/bin/pycompile", line 39, in <module> from debpython.namespace import add_namespace_files ValueError: bad marshal data (unknown type code) dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Preparing to replace libglade2-0 1:2.6.4-1ubuntu1 (using .../libglade2-0_1%%3a2.6.4-1ubuntu1.1_amd64.deb) ... Unpacking replacement libglade2-0 ... Preparing to replace libv4l-0 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_amd64.deb) ... De-configuring libv4l-0:i386 ... Unpacking replacement libv4l-0 ... Preparing to replace libv4l-0:i386 0.8.6-1ubuntu1 (using .../libv4l-0_0.8.6-1ubuntu2_i386.deb) ... Unpacking replacement libv4l-0:i386 ... Preparing to replace libv4lconvert0:i386 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_i386.deb) ... De-configuring libv4lconvert0 ... Unpacking replacement libv4lconvert0:i386 ... Preparing to replace libv4lconvert0 0.8.6-1ubuntu1 (using .../libv4lconvert0_0.8.6-1ubuntu2_amd64.deb) ... Unpacking replacement libv4lconvert0 ... Errors were encountered while processing: /var/cache/apt/archives/python-problem-report_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/python-apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/apport_2.0.1-0ubuntu9_all.deb /var/cache/apt/archives/gnome-orca_3.4.2-0ubuntu0.1_all.deb /var/cache/apt/archives/python-piston-mini-client_0.7.2+bzr57-0ubuntu1_all.deb /var/cache/apt/archives/oneconf_0.2.8.1_all.deb /var/cache/apt/archives/software-center_5.2.2.2_all.deb Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up libglade2-0 (1:2.6.4-1ubuntu1.1) ... dpkg: error processing gnome-orca (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. dpkg: error processing python-problem-report (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4lconvert0 (0.8.6-1ubuntu2) ... Setting up libv4lconvert0:i386 (0.8.6-1ubuntu2) ... dpkg: error processing python-piston-mini-client (--configure): Package is in a very bad inconsistent state - you should reinstall it before attempting configuration. Setting up libv4l-0 (0.8.6-1ubuntu2) ... Setting up libv4l-0:i386 (0.8.6-1ubuntu2) ... dpkg: dependency problems prevent configuration of python-apport: python-apport depends on python-problem-report (>= 0.94); however: Package python-problem-report is not configured yet. dpkg: error processing python-apport (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of software-center: software-center depends on python-piston-mini-client (>= 0.1+bzr29); however: Package python-piston-mini-client is not configured yet. dpkg: error processing software-center (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of oneconf: oneconf depends on python-piston-mini-client (>= 0.3+bzr32-0ubuntu1); however: Package python-piston-mini-client is not configured yet. dpkg: error processing oneconf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of apport: apport depends on python-apport (>= 2.0.1-0ubuntu7); however: Package python-apport is not configured yet. dpkg: error processing apport (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin ... ldconfig deferred processing now taking place This has been going on for two weeks now and I cannot get any updates. Any help would be great.

  Read the article

• how to install Ubuntu on a fresh hard drive

  - by Herman Wiegman

  I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

  Read the article

• Kernel, dpkg, sudo and apt-get corrupted

  - by TECH4JESUS

  Here are some errors that I am getting: 1) A proper configuration for Firestarter was not found. If you are running Firestarter from the directory you built it in, run make install-data-local to install a configuration, or simply make install to install the whole program. Firestarter will now close. root@p:/# firestarter ** (firestarter:5890): WARNING **: The connection is closed (firestarter:5890): GnomeUI-WARNING **: While connecting to session manager: None of the authentication protocols specified are supported. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ^C 2) Also I cannot apt-get install sudo root@p:/# apt-get install sudo Reading package lists... Done Building dependency tree Reading state information... Done sudo is already the newest version. The following packages were automatically installed and are no longer required: gir1.2-rb-3.0 gir1.2-gstreamer-0.10 libntfs10 python-mako libdmapsharing-3.0-2 rhythmbox-data libx264-116 rhythmbox libiso9660-7 librhythmbox-core5 libvpx0 libmatroska4 gir1.2-gst-plugins-base-0.10 rhythmbox-mozilla rhythmbox-plugin-zeitgeist libattica0 libgpac0.4.5 python-markupsafe libmusicbrainz4c2a rhythmbox-plugin-cdrecorder rhythmbox-plugins libaudiofile0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 9 not fully installed or removed. Need to get 0 B/76.3 MB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y /bin/sh: 1: /usr/sbin/dpkg-preconfigure: not found (Reading database ... 495741 files and directories currently installed.) Preparing to replace linux-image-3.2.0-24-generic 3.2.0-24.39 (using .../linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Preparing to replace linux-image-3.2.0-25-generic 3.2.0-25.40 (using .../linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Trouble filtering using rsyslog as syslog server for router

  - by JPbuntu

  I am trying to configure rsyslog (Ubuntu 12.04 Server) to log events from my router. I found this link which got me most of the way there. I am able to get the events logged from the router, and since I don't them logged in syslog, I set up a filter in rsyslog.conf like this: :fromhost-ip, isequal, "192.168.2.1" /var/log/linksys.log & ~ This works, the only problem is now I am not getting any SSHD logs in auth.log. I am really stumped why this would be, SSHD is a local service. I tried using a different filter instead: :msg,contains, "RV042" /var/log/linksys.log & ~ since RV042 is the name of the router, but this doesn't log anything. Any ideas?

  Read the article

• Ubuntu 12.04 Hp G72 Problem Installing proprietary wireless driver

  - by user69402

  I have a fresh Ubuntu 12.04 installed on HP G72 machine. In order for my wireless to work I need the proprietary driver installed - Broadcom STA wireless driver. Trying to install it from the System Settings gives me the error: "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log". So far I suspect the error to be caused by the bad "bcmwl-kernel-source" installation. What i tried: 1. remove "bcmwl-kernel-source" 2. install "bcmwl-kernel-source" installation through the terminal ends with "error code (1)". I would greatly appreciate any help Here is everything that the terminal returns: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,151 kB of archives. After this operation, 3,514 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 170331 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.38+bdcom-0ubuntu6.1) ... Loading new bcmwl-5.100.82.38+bdcom DKMS files... /usr/sbin/dkms: line 467: unset: POST_REMOVE$PRE_BUMLD': not a valid identifier /usr/sbin/dkms: line 467: unset:BUILD_E\CLUWIVE_ARCH': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: modules_conf_arra}': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: `$': not a valid identifier /usr/sbin/dkms: line 419: ${!POST_REMOVE$PRE_BUMLD[@]}: bad substitution /usr/sbin/dkms: line 419: ${!BUILD_E\CLUWIVE_ARCH[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution malloc: ../bash/subst.c:3671: assertion botched free: start and end chunk sizes differ Aborting.../tmp/tmp.pEXTnftUfI: line 4: modules_conf_arra}[[@]}]=[[@]}]}: command not found dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified for record #0. dkms.conf: Error! Directive 'DEST_MODULE_LOCATION' does not begin with '/kernel', '/updates', or '/extra' in record #0. dkms.conf: Error! No 'PACKAGE_VERSION' directive specified. Error! Bad conf file. File: /usr/src/bcmwl-5.100.82.38+bdcom/dkms.conf does not represent a valid dkms.conf file. dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 8 Errors were encountered while processing: bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• How long does an ext4 format take?

  - by Bill O'Dwyer

  The USB cable on my Iomega Prestige 1TB hard drive conked out a while back, and I've finally managed to get a new one. I removed the old NTFS file system because I use Windows maybe once a month, and then only for Windows-only activities. So I plug in the HDD to my laptop, and get it to start converting to ext4. Gparted is currently on the "create new ext4 file system" and has been for about 2 hours. Is this right? I know 1TB is fairly large, but the last time I did this, I'm pretty sure it was a fast(er) job.Can anybody shed some light on what's going on here?

  Read the article

• Fn keys for Brightness not working on Toshiba Satellite L755

  - by JAMES PARENTE

  I am running Ubuntu 12.04 and I love it! The only problem is the keys for my brightness, F6 and F7, does not work when I am on battery power or AC power. It randomly works after I am idle for a while and log back in. The other weird thing is to see my battery indicator, I need to toggle my touch pad button that is right above the actual pad on and off for it to show up, and then back on so I can use my touch pad, obviously. The only other Fn buttons that work on my laptop is the button to mute (F1) Touch pad on and off (F9) and Fn+3 and Fn+4 for my volume. The only Fn buttons that I care if they work again are my brightness, which again, are F6 and F7. Thanks! James

  Read the article

• Trying to login to openssh, permission denied

  - by noah sisk

  I have been trying to login to ssh on a ubuntu 11.04 server as root with the AllowRootLogin thing set to yes but i have been getting a "Permision denied" Heres a copy of my attempt with ssh -v: Last login: Fri Jun 8 21:07:20 on ttys000 noah-sisks-macbook-pro:~ phreshness$ ssh -v [email protected] -p 22 OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.133 [192.168.1.133] port 22. debug1: Connection established. debug1: identity file /Users/phreshness/.ssh/id_rsa type -1 debug1: identity file /Users/phreshness/.ssh/id_rsa-cert type -1 debug1: identity file /Users/phreshness/.ssh/id_dsa type -1 debug1: identity file /Users/phreshness/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.1.133' is known and matches the RSA host key. debug1: Found key in /Users/phreshness/.ssh/known_hosts:6 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/phreshness/.ssh/id_rsa debug1: Trying private key: /Users/phreshness/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again. [email protected]'s password:

  Read the article

• How to hide keyboard layout shortcut from Unity top panel?

  - by user67715

  I'm using Ubuntu 12.04 together with X Neural Switcher, which is a program for the automatic switching of the keyboard layout. The switcher goes with a GUI called gXNeur. The GUI places an applet icon to the Unity top panel (the gXNeur had to be whitelisted for the icon to become visible) that help a lot to configure and make urgent changes in the rules that the program uses. But after the icon is whitelisted I'm having two keyboard layout indicators in the panel (one - native, the second one - gXNeur). The native is the one I'd like to hide while gxNeur is more intuitive. Is there a way to do that? Thanks a lot for your help!

  Read the article

• Just installed 12.04 and it freezes when I try logging in

  - by James

  I just installed Ubuntu 12.04 alongside Windows 7 on an Acer Aspire 1 with AMD Dual-Core C60, 4 GB RAM, and 320 GB HDD (100 GB partitioned for Ubuntu). After restarted my computer, I was able to log in fine but when I tried to log in again after shutting my netbook off, it began to freeze on the log in screen. The freezing occurs several seconds after I'm prompted to enter my password. Even if i enter the password before the freezing occurs, I end up getting stuck while it's loading or something. I'm new to Ubuntu so I have no idea what to do. Also, before it gets to the log in screen, it says something like this: NTFS5: No wubildr NTFS5: No wubildr NTFS5: error: "prefix" edit: it was wubildr, not unbilder. Also, the freezing seems to be inconsistent

  Read the article

• How can I install bleachbit in Ubuntu 12.04 LTS?

  - by gunjan parashar

  I'm unable to install bleachbit on my laptop running Ubuntu 12.04. The Ubuntu Software Centre shows that the package is available from the Universe software source and I have the option to "use this source" but after that, it gets stuck while quering software sources. How can I fix this problem? It's occurred to me that perhaps this could be from software sources being deleted in my configuration. If so, can someone tell me the default list of software sources? plz help me out and sorry for my poor english

  Read the article

• How can I permanently save a password-protected SSH key?

  - by pl1nk

  I am using Awesome Window Manager How can I permanently add private keys with password? Inspired by the answer here I have added the private keys in ~/.ssh/config Contents of ~/.ssh/config: IdentityFile 'private key full path' Permissions of ~/.ssh/config: 0700 But it doesn't work for me. If I manually add the key in every session, it works but I'm looking for a more elegant way (not in .bashrc)

  Read the article

• 12.04 - How do I Fix Grub Error 15 on New Dual Boot Install

  - by Garth

  I just installed 12.04 to Dual Boot (separate partitions) with an existing Win 7. Upon reboot after install things freeze after Grub 1.5 with a Grub Error 15 message. Is there any easy way to fix this? (I am posting this from my second computer) UPDATE: I managed to boot into both 12.04 and Win7 using BIOS: Selected the disk with the Win7 'C' Partition: resulted in the same error message Rebooted, tried the disk with the Ubuntu Partitions: *Grub Menu loaded: Managed to boot 12.04, rebooted, used BIOS again: Managed to boot Win 7 So, I have access to my computer again (thru BIOS), but this has been a pretty crappy install experience. Garth I used the the Final release 12.04 Ubuntu install disk, reformatted all Linux partitions, and expected a simple clean install. Other than specifying the Ubuntu Partitions, I did a basic install of 12.04. No way I did do anything to get this crap error failure! I have no idea why my install resulted in a Grub-15 error. CLOSED - Answered my own Question: I burned a RescuTux Disk and used it to recover grub2 (simplest and easiest way for me. http://www.supergrubdisk.org/category/download/rescatuxdownloads/ Garth

  Read the article

• Alternative to nofollow: custom 302 url shortener?

  - by Dogweather

  Here's the scenario: lots of blogging platforms make it tedious to insert nofollow into links within the post content. I.e., you need to edit the html, format it correctly, etc. I have a client who posts lots of content with links that should be nofollow'ed, and I thought of a novel way to handle this, since the blogging platform they're using makes it hard: I install a URL shortener web app on the client's domain. The shortener works as normal, except it redirects via 302 instead of 301. The pagerank will therefore stay at the shortener's domain, and not flow on to the target site. Part 2: In order to get the pagerank to collect meaningfully, say on the site's home page, the shortened URLs would be generated like this: /link?12345 instead of /link/12345. And then, the path /link would 301 to the home page. This way, the id is a param, not a path element. And thus, all the incoming shortened links are going to one path, which transfers pagerank to the home page. So that's my idea. I wanted to see if anybody could find problems with it. Thanks!

  Read the article

• Parsing google site speed in analytics

  - by Kevin Burke

  I'm having a hard time making heads or tails of the Site Speed graphs in Google Analytics. Our site speed is fluctuating wildly from month to month, despite a large sample (the report is "based on 100,000's of visits) and a consistent web set up (static files served from an EC2 instance running nginx behind a load balancer). Here's our site speed, with each datapoint representing a week worth of data. Over this time period we modified our source and HTTP headers to increase our cache hits on static resources by 5x. Why would it fluctuate so much? Is there any way to get more reliable information from those graphs?

  Read the article

• Optimization and Saving/Loading

  - by MrPlosion1243

  I'm developing a 2D tile based game and I have a few questions regarding it. First I would like to know if this is the correct way to structure my Tile class: namespace TileGame.Engine { public enum TileType { Air, Stone } class Tile { TileType type; bool collidable; static Tile air = new Tile(TileType.Air); static Tile stone = new Tile(TileType.Stone); public Tile(TileType type) { this.type = type; collidable = true; } } } With this method I just say world[y, x] = Tile.Stone and this seems right to me but I'm not a very experienced coder and would like assistance. Now the reason I doubt this so much is because I like everything to be as optimized as possible and there is a major flaw in this that I need help overcoming. It has to do with saving and loading... well more on loading actually. The way it's done relies on the principle of casting an enumeration into a byte which gives you the corresponding number where its declared in the enumeration. Each TileType is cast as a byte and written out to a file. So TileType.Air would appear as 0 and TileType.Stone would appear as 1 in the file (well in byte form obviously). Loading in the file is alot different though because I can't just loop through all the bytes in the file cast them as a TileType and assign it: for(int x = 0; x < size.X; x++) { for(int y = 0; y < size.Y; y+) { world[y, x].Type = (TileType)byteReader.ReadByte(); } } This just wont work presumably because I have to actually say world[y, x] = Tile.Stone as apposed to world[y, x].Type = TileType.Stone. In order to be able to say that I need a gigantic switch case statement (I only have 2 tiles but you could imagine what it would look like with hundreds): Tile tile; for(int x = 0; x < size.X; x++) { for(int y = 0; y < size.Y; y+) { switch(byteReader.ReadByte()){ case 0: tile = Tile.Air; break; case 1: tile = Tile.Stone; break; } world[y, x] = tile; } } Now you can see how unoptimized this is and I don't know what to do. I would really just like to cast the byte as a TileType and use that but as said before I have to say world[y, x] = Tile.whatever and TileType can't be used this way. So what should I do? I would imagine I need to restructure my Tile class to fit the requirements but I don't know how I would do that. Please help! Thanks.

  Read the article

• Why does creating dynamic bodies in JBox2D freeze my app?

  - by Amplify91

  My game hangs/freezes when I create dynamic bullet objects with Box2D and I don't know why. I am making a game where the main character can shoot bullets by the user tapping on the screen. Each touch event spawns a new FireProjectileEvent that is handled properly by an event queue. So I know my problem is not trying to create a new body while the box2d world is locked. My bullets are then created and managed by an object pool class like this: public Projectile getProjectile(){ for(int i=0;i<mProjectiles.size();i++){ if(!mProjectiles.get(i).isActive){ return mProjectiles.get(i); } } return mSpriteFactory.createProjectile(); } mSpriteFactory.createProjectile() leads to the physics component of the Projectile class creating its box2d body. I have narrowed the issue down to this method and it looks like this: public void create(World world, float x, float y, Vec2 vertices[], boolean dynamic){ BodyDef bodyDef = new BodyDef(); if(dynamic){ bodyDef.type = BodyType.DYNAMIC; }else{ bodyDef.type = BodyType.STATIC; } bodyDef.position.set(x, y); mBody = world.createBody(bodyDef); PolygonShape dynamicBox = new PolygonShape(); dynamicBox.set(vertices, vertices.length); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = dynamicBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.0f; mBody.createFixture(fixtureDef); mBody.setFixedRotation(true); } If the dynamic parameter is set to true my game freezes before crashing, but if it is false, it will create a projectile exactly how I want it just doesn't function properly (because a projectile is not a static object). Why does my program fail when I try to create a dynamic object at runtime but not when I create a static one? I have other dynamic objects (like my main character) that work fine. Any help would be greatly appreciated. This is a screenshot of a method profile I did: Especially notable is number 8. I'm just still unsure what I'm doing wrong. Other notes: I am using JBox2D 2.1.2.2. (Upgraded from 2.1.2.1 to try to fix this problem) When the application freezes, if I hit the back button, it appears to move my game backwards by one update tick. Very strange.

  Read the article

• How do I manage dependencies for automated builds on my build server?

  - by Tom Pickles

  I'm trying to implement continuous integration into our day to day workings. In our team, we're moving from just building our code in Visual Studio on our workstations and deploying, to using MSBuild.exe and automating on our build server (which is Jenkins) without the use of Visual Studio. We have external dependencies to references such as Automap in our projects. Because the automap (for example) dll isn't on the build server, the msbuild execution fails, for obvious reasons. There are other dll's which I need to be part of the build, I'm just using automap as an example. So what's the best way to get any dependencies onto the build server as part of the automated build? I've seen references to using a 'lib' folder, but I don't really understand where I should be putting it (in my project, filesystem, SVN ...?), and how the build server will get to it. I've also read that NuGet can do something with dependencies, but my build server isn't connected to the internet, and I don't understand how I can get my build to pull a NuGet package I may have created, and how it works together. Edit: I'm using subversion and we cannot use TeamCity as we would have to buy it and there's zero chance of funding.

  Read the article

• JQuery, Load() contents with plugins

  - by Galas

  I know this is not a completely new question, but none of the answers solved my problem... I have built a little menu that uses load() to load image galleries (as external html files) into a specified div ("content"). The said galleries make use of a JQuery plugin (SlideJS). Now I know that load() does not work for script tags and that I need to use $.getscript in the callback function in order to run the scripts, but it does not work. I have two .js files that need to be loaded: one is the plugin itself and another one is a smaller script with a preloader and the animations for the captions. I can't seem to merge them together; if I put them into the same document, the script won't run. So I tried just using $.getscript to load the two files. I tried using two callbacks as suggested in other answer (I know it's not ideal...): $("#proposal").click(function(){ $(this).addClass('selected'); $("a:not(:#proposal)").removeClass('selected'); $("#content").load("works/proposal/proposal.html", function(){ $.getScript("js/slide.js", function (){ $.getScript("js/slidepage.js"); }); }); }); and I tried a variable (read about it in some other faq, not sure if the syntax is correct) $("#proposal").click(function(){ $(this).addClass('selected'); $("a:not(:#proposal)").removeClass('selected'); $("#content").load("works/proposal/proposal.html", function(){ var scripts = ['js/slide.js','js/slidepage.js']; $.getScript(scripts); }); }); So none of these work. What am I doing wrong? I'm just starting on jquery and my js knowledge is very limited. Should I just merge the two .js files together using minify or something? One of them is already minified, but I've tried with a non-minified version and it does not work either. Can anyone suggest any other solution around this problem? I thought of just having the div embedded in the main document and just showing it on click, but I'll have at least 4 galleries with about 8 to 10 images each... its a lot of images to load in the main page, so I don't think its the best way. if you need me to post any more code, please ask! Thanks in advance for all your help!

  Read the article

• git, SSH_ASKPASS on windows

  - by Martin Schreiber

  I am writing a graphical git frontend for Linux and Windows (MSEgit) based on MSEide+MSEgui. MSEgit has an internal console window which communicates with git by pipes. On Linux it uses a PTY so SSH asks for key unlocking passwords on the PTY. On Windows I wrote a small password entry application and set the SSH_ASKPASS environment variable accordingly. SSH calls the password application if git is started with CreateProcess() dwCreationFlags DETACHED_PROCESS set but the password entry window will not be focused, its taskbar icon flashes instead. SSH does not run the password application if FreeConsole() is called to be sure that there is no attached console to MSEgit and git is started without DETACHED_PROCESS but CREATE_NO_WINDOW instead. I assume a Windows equivalent of POSIX setsid() should be called. How can I force SSH to use SSH_ASKPASS without the DETACHED_PROCESS flag? If this is not possible, how can I ensure that the password entry window is focused?

  Read the article

• Cakephp 1.3 Form Alignment?

  - by Sham Ali

  Hi Fellwos i am new at cakephp 1.3, i am trying to create a Edit User Form with Form Helper in Cakephp 1.3. i am unable to make a customize alignments of the form elements. for example echo $this-Form-create('Model', array('action' = 'edit_users','id' = 'UserForm')); echo $this-Form-input('First Name',array('style'='width:100px','label'='First Name:')); echo $this-Form-input('Last Name',array('style'='width:100px','label'='Last Name:')); echo $this-Form-input('Position',array('style'='width:100px','label'='Position:')); i want first two input fields in single line and 3rd input field in 2nd line, i have tried it with div false, but its not working. if anybody can help me, thanks in advance

  Read the article

• Getting response status code 0 in SmartGWT webservice call using json

  - by Girish

  I have developed application using SmartGWT, now i need to call webservice using json to another application which is deployed in another server for submitting username and password. When i make a request with url and POST method, getting the response status code as 0 and response text as blank. Here is my code, public void sendRequest() throws Exception { // Get login json data to be sent to server. String strData = createLoginReqPacket(); String url = "some url"; RequestBuilder builder = new RequestBuilder(RequestBuilder.POST, url); builder.setHeader("Content-Type", "application/json"); builder.setHeader("Content-Length", strData.length() + ""); Request response = builder.sendRequest(strData, new RequestCallback() { @Override public void onResponseReceived(Request request, Response response) { int statusCode = response.getStatusCode(); System.out.println("Response code ----"+response.getStatusCode()+""); if (statusCode == Response.SC_OK) { String responseBody = response.getText(); System.out.println("Respose :" + responseBody); // do something with the response } else { GWT.log("Response error at server side ----",null); // do in case of server error } }// end of method. @Override public void onError(Request request, Throwable exception) { GWT.log("**** Error in service call ******",null); }// end of method. }); builder.send(); }// end of send request. Please anybody knows the solution?? Give some reference code or links for this. Thanks.

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >