Daily Archives

Articles indexed Thursday March 29 2012

Page 14/18 | < Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >

  • Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

    - by Henno
    Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

    Read the article

  • i cant ping to my DMZ zone from the local inside PC

    - by Big Denzel
    HI everybody. Can anyone please help me on the following issue. I got a Cisco Asa 5520 configured at my network. I cant ping to my DMZ interface from a local inside network PC. so the only way a ping the DMZ is right from the Cisco ASA firewall, there i can pint to all 3 interfaces, Inside, Outside and DMZ,,,, But no PC from the Inside Network can access the DMZ. Can please any one help? I thank you all in advance Bellow is my Cisco ASA 5520 Firewall show run; ASA-FW# sh run : Saved : ASA Version 7.0(8) ! hostname ASA-FW enable password encrypted passwd encrypted names dns-guard ! interface GigabitEthernet0/0 description "Link-To-GW-Router" nameif outside security-level 0 ip address 41.223.156.109 255.255.255.248 ! interface GigabitEthernet0/1 description "Link-To-Local-LAN" nameif inside security-level 100 ip address 10.1.4.1 255.255.252.0 ! interface GigabitEthernet0/2 description "Link-To-DMZ" nameif dmz security-level 50 ip address 172.16.16.1 255.255.255.0 ! interface GigabitEthernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 description "Local-Management-Interface" no nameif no security-level ip address 192.168.192.1 255.255.255.0 ! ftp mode passive access-list OUT-TO-DMZ extended permit tcp any host 41.223.156.107 eq smtp access-list OUT-TO-DMZ extended permit tcp any host 41.223.156.106 eq www access-list OUT-TO-DMZ extended permit icmp any any log access-list OUT-TO-DMZ extended deny ip any any access-list inside extended permit tcp any any eq pop3 access-list inside extended permit tcp any any eq smtp access-list inside extended permit tcp any any eq ssh access-list inside extended permit tcp any any eq telnet access-list inside extended permit tcp any any eq https access-list inside extended permit udp any any eq domain access-list inside extended permit tcp any any eq domain access-list inside extended permit tcp any any eq www access-list inside extended permit ip any any access-list inside extended permit icmp any any access-list dmz extended permit ip any any access-list dmz extended permit icmp any any access-list cap extended permit ip 10.1.4.0 255.255.252.0 172.16.16.0 255.255.25 5.0 access-list cap extended permit ip 172.16.16.0 255.255.255.0 10.1.4.0 255.255.25 2.0 no pager logging enable logging buffer-size 5000 logging monitor warnings logging trap warnings mtu outside 1500 mtu inside 1500 mtu dmz 1500 no failover asdm image disk0:/asdm-508.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (dmz,outside) tcp 41.223.156.106 www 172.16.16.80 www netmask 255.255.255 .255 static (dmz,outside) tcp 41.223.156.107 smtp 172.16.16.25 smtp netmask 255.255.2 55.255 static (inside,dmz) 10.1.0.0 10.1.16.0 netmask 255.255.252.0 access-group OUT-TO-DMZ in interface outside access-group inside in interface inside access-group dmz in interface dmz route outside 0.0.0.0 0.0.0.0 41.223.156.108 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute http server enable http 10.1.4.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside ! ! match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect dns maximum-length 512 inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global Cryptochecksum: : end ASA-FW# Please Help. Big Denzel

    Read the article

  • I just restarted Apache and now the server is down

    - by James
    I am pretty terrified right now. I'm scared I'm going to get a call in a couple minutes from a hundred people saying the website doesn't work. I was at the terminal changing some configuration files when I went to restart the server to update the .conf files with this command: /etc/init.d/apache2 graceful After I ran that, none of the websites work and I have no idea what to do. There are about 100 errors I am getting according to the log files. They all begin with "PHP Notice" and most relate to "use of undefined constant" Also, I just spoke with a coworker, describing what I did, and he noticed that there are two installations of apache on the server and that I restarted the one that we don't use. This is what the error log says (assuming it's the correct error log): [Wed Jan 05 11:52:06 2011] [notice] Graceful restart requested, doing restart Warning: DocumentRoot [/u/apps/staging/antetr/current/public/] does not exist [Wed Jan 05 11:52:08 2011] [warn] NameVirtualHost *:80 has no VirtualHosts (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs (2)No such file or directory: apache2: could not open error log file /u/apps/production/madfilmdash/current/log/apache-error.log. Unable to open logs FINAL UPDATE: Ok, I fixed it. The problem was (as you experts facepalming probably know) that it couldn't access an error log in the directory I was working in. I created an empty error log file and tried the restart command again and now all the sites are back up... Though my original problem is still there.. Thanks to all those who offered advice, it really helped and let me breathe for a moment.

    Read the article

  • cygwin sshd fails to allocate pty for some users

    - by user115851
    I have (finally) got sshd working under cygwin on Win7 - well, sort of. The sshd runs as user 'cyg_server'. I'm able to successfully ssh to my computer using that same user name. However, if I attempt to ssh using my normal (Windows) user name, it fails trying to allocate a pty for my login session. For example, output of 'sshd -D -d -d -d' contains this .. ... debug1: Entering interactive session for SSH2. debug2: fd 4 setting O_NONBLOCK debug2: fd 5 setting O_NONBLOCK debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug2: session_new: allocate (allocated 0 max 10) debug3: session_unused: session id 0 unused debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pty1 !!! chown(/dev/pty1, 17308, 10513) failed: Invalid argument debug1: do_cleanup debug1: session_pty_cleanup: session 0 release /dev/pty1 Currently /dev is owned by my normal account. I've tried changing its ownership to cyg_server as well as SYSTEM. In both cases the problem persists. I've also changed permissions for /dev (e.g, 700 and 777) - again problem persists. [As a side note - it is strange that whenever I do 'ls -al /dev' the ptys do not show up. However, if I 'ls -l /dev/ptyX' for a pty I know to exist, it shows up. Is that normal for cygwin?] -Bob Andover, MA

    Read the article

  • Slow VM on esxi 4.1

    - by user57432
    We have a FreeBSD 64bit running on a esxi 4.1, the hardware platform is a DELL R710 with 2 x 56xx (intel 6core cpu) and 48 GB ram. The FreeBSD vm is very slow, when we compiles/builds something on it, it takes 5 minuts and it says "build time 18 seconds.". There's no vmtools installed on the vm. The same vm is installaed on another R710 running esxi 4.0 for dell and there's no problems with that one. Does anyone have any idea about what to look for? the VMs on the second server (ESXi 4.1) is a clone of the VMs running on the first VMserver (ESXi 4.0 Dell edition). It's not possible for me to move the VM back to the first server since the file contaning the vm is too big. We installed the new esxi with a datasore with 8mb blocks because 1mb blocks dident allow for the file size we needed. It looks like the www server on the new ESXi 4.1 works fine, but I havent really tested it. There's not installed vmtools on any of the VMs (FreeBSD). The block size on the second VM (ESXi 4.1) datastorage is 8mb and 1mb on the first (ESXi 4.0)

    Read the article

  • Will deleting partitions affect my hard drive in any way?

    - by Portali5t
    I installed a Suse partition of around 200 Gigabytes on my hard drive, primarily running Windows 7. I am sick of Suse's crap, and just want to get rid of the OS and get that partition back for Windows' use. Is it as simple as that partition gets deleted,and I can choose what partition that space goes to, or is it communal that all partitions can access? I know next to nothing about partitions, so any help would be great. Also, if someone knows HOW to delete partitions, that would be a great help too. Thanks!

    Read the article

  • How to send a popup message to unknow computer connected to my WLAN?

    - by Leandro
    Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

    Read the article

  • Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

    - by Sarveshwar
    I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

    Read the article

  • Linux file permissions seem right but I can't write to a directory

    - by CaseyB
    I believe that I have the permissions set correctly but I can't write to a directory. Here's my problem: cborders@Kraken:/var/www$ ls -la total 12 drwxrwxr-x 2 webz webz 4096 2011-12-30 14:58 ./ drwxr-xr-x 13 root root 4096 2011-12-30 14:58 ../ -rw-rw-r-- 1 webz webz 177 2011-12-30 14:58 index.html cborders@Kraken:/var/www$ id cborders uid=1000(cborders) gid=1000(cborders) groups=1000(cborders),4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),113(lpadmin),114(admin),1002(webz) cborders@Kraken:/var/www$ mkdir test mkdir: cannot create directory `test': Permission denied The owner of the directory is a user called webz and the permissions allow the user and group rwx access to it. I am in the webz group but I still can't make any changes. What am I doing wrong here?

    Read the article

  • conditional formatting for subsequent rows or columns

    - by Trailokya Saikia
    I have data in a range of cells (say six columns and one hundred rows). The first four column contains data and the sixth column has a limiting value. For data in every row the limiting value is different. I have one hundred such rows. I am successfully using Conditional formatting (e.g. cells containing data less than limiting value in first five columns are made red) for 1st row. But how to copy this conditional formatting so that it is applicable for entire hundred rows with respective limiting values. I tried with format painter. But it retains the same source cell (here limiting value) for the purpose of conditional formatting in second and subsequent rows. So, now I am required to use conditional formatting for each row separately s

    Read the article

  • Automatically detecting temperature sensors on startup (Ubuntu 10.10)

    - by dpitch40
    I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

    Read the article

  • Quake 3 won't install on Windows 7

    - by Ernest Friedman-Hill
    Today I tried to install Quake 3 from my original 1999 CD on a Windows 7 laptop. Windows 7 resolutely refused to run the installer, helpfully explaining that I might need a 32- or 64-bit version, depending on what my OS is (you have to love those Windows error messages: absolutely correct, but as unhelpful as humanly possible). In any case, of course the 1999 software is 32-bit, and the laptop is 64-bit. But I was pretty sure that 64-bit Windows versions could handle running 32-bit software. What gives?

    Read the article

  • Character, element, or hack to push everything after it to the next page?

    - by sooprise
    I have a program that automatically populates a word document. Let's say the word document has 3 sections: A, B, and C. My program populates section B. Section B can be 1 line or 100 lines, so what I want to be able to do is make section C automatically start on a fresh page. section B <newPageHack> <-- Can I add anything here to force section C onto a new page no matter how large section B is? section C (on a new page)

    Read the article

  • Memory compatibility?

    - by nvillec
    I'm in the process of building a PC intended mostly for gaming and I've got a few questions. Currently, I only have the motherboard and CPU: Motherboard: GIGABYTE GA-Z68AP-D3 CPU: Intel Core i3-2120 My main question is about memory compatibility. I have 4 Hynix 2GB HMT125U7BFR8C-G7 with light-moderate use laying around and I'd love to save a few bucks if I can. I've read that this is server memory... a) Will that be a problem for PC use? b) Is it compatible with the motherboard? I've emailed Hynix and checked Crucial to no avail. If incompatible, what memory would be a good fit given the components I have? The motherboard has 4 sockets and supports up to 32GB, but I don't know that I have the budget for that at the moment. Thanks!!

    Read the article

  • Can't access shared folder of win8/win7 machine - Error code: 0x80004005. Unspecified Error

    - by ruslan
    It's ironic that I, software engineer with 12 years of experience, continue to have this problem from one version of Windows to another without being able to achive consistent result (sometimes it works). Here it goes again. I have a machine with Win8 Consumer Preview. It doesn't really matter that it's win8. I had same issue with win7 before. On given machine I created local admin user with same name and password I have on second PC (the machine I'm typing this from now). I have two questions to you guys. Why I'm not able to access C$ share of win8 machine from another Win7 machine? I get error that C$ doesn't exist even though it does. Why I'm not able to access share named "test" in Win8 for which Permission set to Full for Everyone. When I attempt to access it from Win7 machine I'm asked to enter username and password. After entering administrator credentials I get error "Windows cannot access \192.168.1.123\test. Error code: 0x80004005. Unspecified Error". Windows Firewall is disabled on Win8 machine for both Private and Public networks. Guest account is disabled. Built-in admin account is enabled. Machine is pingable from other machines.

    Read the article

  • install Win7 SP1 with bcdedit failing

    - by Albert
    I'm getting the error 0x800F0A12 which is described here. bcdedit says: C:\>bcdedit.exe Der Speicher für die Startkonfigurationsdaten konnte nicht geöffnet werden. Das System kann die angegebene Datei nicht finden. (English: Couldn't open the start configuration. Couldn't find the file.) (off topic: how can I get those messages in English?) I played around and I assume that is because the system partition C:\ is not on the first BIOS disk. There are 4 disks in my PC. On one of them (shown as the 4th in Windows drive manager) contains Windows, whereby the system-reserved NTFS partition is the first primary and the second primary is my main Windows system partition. A few more partitions follow with other (non-NTFS) stuff. I was able to set the first two disks offline (via the Windows drive manager). For the 3rd disk, it says that it cannot set the BIOS 0 disk offline. How can I ignore that and still install SP1? I don't want to rewire/resetup my disks.

    Read the article

  • How can I make my other computer run a program?

    - by TimothyAWiseman
    If I have two computers, both running Windows 7, on my home network, is there some way to write a script so that I can click on a single icon on the one computer and make the other computer execute a program? Clearly, I could do this by accessing the other computer through remote desktop connection and then executing the program, but I would like to avoid (or at least automate) making the connection so I can just click a single icon to have it happen.

    Read the article

  • Why can't email clients create rules for moving dates like "yesterday"?

    - by Morgan
    I've never seen an email client that I could easily create a rule to do something like "Move messages from yesterday to a folder?" Is there some esoteric reason why this would be difficult? I know I can easily create rules around specific dates, but that isn't the same thing by a long shot; am I missing something? In Outlook 2010 I can create search folders that do sort of this type of thing, but you can't create rules around a search folder... seems like either I am missing something major, or this is terribly short-sided.

    Read the article

  • From the Tips Box: Free Shipping with Amazon Filler, Repairing Ethernet Cables, and Emergency Stickers

    - by Jason Fitzpatrick
    Once a week we round up some great tips from the tips box and share them with everyone. This week we’re looking at easy Amazon filler items, repairing the tab on Ethernet cable connectors, and a humorous data-security sticker. How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

    Read the article

  • Bring Spring to Your Desktop with the Dreamgarden Theme for Windows 7

    - by Asian Angel
    Are you ready for Spring? Then bring the beauty of the season to your desktop with the Dreamgarden Theme for Windows 7. This refreshing theme comes with eighteen images full of springtime color by photographer Christina Manchenko. Download the Dreamgarden Theme [Windows 7 Personalization Gallery] How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

    Read the article

  • How to Own Your Own Website (Even If You Can’t Build One) Pt 1

    - by Eric Z Goodnight
    You’ve probably put up plenty of pages and accounts on various services and blogs. But today, learn how to become a real website owner and put together an awesome feature-rich website of your own with little to no experience. Having your own website is expected in many fields. You can host your resume and various files, or put up an online business card to make sure that you’re one of the top results when you do an ego search on Google. Whatever your reason is, you don’t have to pay hundreds (or thousands?) of dollars to have somebody else make a website for you, when you can use free software and cheap hosting to make your own in minutes. In this first part of a multi-part series, we’ll discuss how to put up a simple website and and how to start owning your own domain. How to Own Your Own Website (Even If You Can’t Build One) Pt 1 What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS

    Read the article

  • NFC App Inventor permet aux non-développeurs d'intégrer NFC dans une application Android, la démonstration de la bêta annoncée

    NFC App Inventor permet à tout utilisateur d'intégrer NFC dans une application Android la démonstration de la bêta annoncée Une démonstration d'une nouveauté issue d'App Inventor pour la prise en charge du NFC sera effectuée ces jours. App Inventor est un kit académique de développement d'application Android pour les non-développeurs. Le projet avait été développé à la base par le MIT, puis cédé par la suite à Google. Le projet avait ensuite fait les frais de la politique de Google ayant entrainé l'abandon de plusieurs autres projets et était retourné entre les mains du MIT en début 2012. ...

    Read the article

  • CodePlex Daily Summary for Thursday, March 29, 2012

    CodePlex Daily Summary for Thursday, March 29, 2012Popular ReleasesWouter's SharePoint Demo Land: Custom Views and Forms: Samples showing how to provision custom lists. Custom view rendering with code, XSLT, XSLT + code. Custom forms with database lookups.YouTube API Class & Server Control for ASP.NET 4.0: Binary dll Files with Demo: . You can find binary dll files under :- Demo\bin\ folder Demo url :- http://demo.svinn.com/YouTube/Default.aspx 1 GB Hosting + Free Domain => http://ghosting.in/ .callisto: callisto 2.0.23: Patched Script static class and peak user count bug fix.Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...JSON Toolkit: JSON Toolkit 3.1: slight performance improvement (5% - 10%) new JsonException classPicturethrill: Version 2.3.28.0: Straightforward image selection. New clean UI look. Super stable. Simplified user experience.Indent Guides for Visual Studio: Indent Guides v12 (beta 2): Note This beta is likely to be less stable than the previous one. If you have severe troubles using this version, please report them with as much detail as possible (especially other extensions/addins that you may have) and downgrade to the last stable release. Version History Changed since v12 (beta 1): new options dialog with Quick Set selections for behavior restructured settings storage (should be more reliable) asynchronous background document analysis glow effect now appears in p...SQL Monitor - managing sql server performance: SQL Monitor 4.2 alpha 16: 1. finally fixed problem with logic fault checking for temporary table name... I really mean finally ...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 Mugen MVVM Toolkit: Mugen MVVM Toolkit ver 1.1: Added Design mode support.Multiwfn: Multiwfn 2.3.2: Multiwfn 2.3.2Harness: Harness 2.0.2: change to .NET Framework Client Profile bug fix the download dialog auto answer. bug fix setFocus command. add "SendKeys" command. remove "closeAll" command. minor bugs fixed.BugNET Issue Tracker: BugNET 0.9.161: Below is a list of fixes in this release. Bug BGN-2092 - Link in Email "visit your profile" not functional BGN-2083 - Manager of bugnet can not edit project when it is not public BGN-2080 - clicking on a link in the project summary causes error (0.9.152.0) BGN-2070 - Missing Functionality On Feed.aspx BGN-2069 - Calendar View does not work BGN-2068 - Time tracking totals not ok BGN-2067 - Issues List Page Size Bug: Index was out of range. Must be non-negative and less than the si...YAF.NET (aka Yet Another Forum.NET): v1.9.6.1 RTW: v1.9.6.1 FINAL is .NET v4.0 ONLY v1.9.6.1 has: Performance Improvements .NET v4.0 improvements Improved FaceBook Integration KNOWN ISSUES WITH THIS RELEASE: ON INSTALL PLEASE DON'T CHECK "Upgrade BBCode Extensions...". More complete change list and discussion here: http://forum.yetanotherforum.net/yaf_postst14201_v1-9-6-1-RTW-Dated--3-26-2012.aspxmenu4web: menu4web 0.0.3: menu4web 0.0.3ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...New ProjectsAeroFichierAchats: Program that reworks excel files into PDFArepa: A lightweight non-invasive tool that helps you to implement Behavior Driven Development (BDD) on .NET projects. Arepa produces guidelines of using BDD on your current tests, and customisable and portable test reports integrating XML Documentation Comments. It's developed in C# using Scrum and BDD.Azure User Management Console - AUMC: Azure User Management Console - AUMC is a User Graphic Interface (GUI) that manages the users and logins of an Azure SQL database. The tool is simply converting your action into T-SQL commands and execute them on the Azure SQL Database. BaseProject: BaseProjectCraftBukkit Updater: I don't activly monitor the status of CraftBukkit's updates, but I want to stay on top of the updated versions. This will track the last version in cache then check for updates. Upon update there should be an option to download automaticly to location XYZ or to send an email/sms.Dan Dot Com: Dan's SandboxEjemplos Windows 8 Javascript: Este proyecto pretende recoger todos los ejemplos de aplicaciones metro para Windows 8 en JavaScript que vaya desarrollando para fines didácticos. Todas las colaboraciones son bienvenidas.EntityFramework Generic Patterns: EntityFramework Generic PatternsEpFamvir: EpFamvir is a Visual C++ software framework that supports data-intensive distributed applications under a GPL3.0 license. It enables applications to work with thousands of nodes and petabytes of data. Famvir was inspired by Apache Hadoop, Google's MapReduce, and Google FS.etdc/etp: ???????????????? ???????? ??????? etest.ru. IndieCiv: IndieCiv - An independent look at how a new game could be made using fan-made graphics from Civ3. You can visit the discussion at www.civfanatics.com http://forums.civfanatics.com/showthread.php?t=421582Libro SQL Server 2012: Databases and examples for my Italian book on "SQL Server 2012"Linq2Rest: Parses OData system query parameters to create a LINQ query that can be used to filter a model set. Also exposes a LINQ provider for web services supporting the OData query parameters. Use extension method Filter (in Linq2Rest namespace) on any IEnumerable source.LittleUmph: It's a little library to help you to alleviate some of the mundane stuff during your development. It has some nifty stuff like a neat database wrapper, conversion utilities, string functions and vast of other mini helpers to improve the efficiency and consistency of your code.LonghornRPG: LonghornRPGMemberManager: Keep track of membersMSU Student Teaching DataBase: A C# application to manage student placements for MSU.MvcContrib4: This is the MvcContrib project to support MVC 4MYFIRSTDEMOPROJECT: Introduction to CSharpOrchard Page Title Override: This Orchard CMS module allows a user to manage the Page Title. You can now have the Site Name show up last in the Page Title or hide the Site Name completely from the Page Title. The module also contains a Content Part allowing a Page Title to be separate from content title.phoenixtree: .net linux sql php python html javascript c exampleProject Explorer for Notepad++: This project mainly aims at providing a functional rich project explorer experience on notepad++. Features include Folder based file browsing, searching, filtering and more.Projeto Exemplo FPU: Projeto Exemplo FPUPureCalendar: simple web calendarrails study: rails studySafe IM: a safe IM software use AES,SHA,RSA.Contain a server and a clientScoreboard: Scoreboard is a simple sports and/or activities scoreboard which can be used for a variety of purposes It was developed for use with a 1024x768 projector and features home and away scores, countdown clock, even a buzzer. It's developed in VB.net.SharePoint System dates and editor fields updater: The SPChangeDate is a utility used to modify some of the system fields in a SharePoint 2010 document library using a datagridview (Excel Like). It allows the modification of the following SharePoint fields: 1. Created 2. Modified 3. Modified By 4. Created By Shi Ji Xiang CRM 2012: Shi Ji XiangSIGECAR: SIGECARStable Dependencies Principle Checker for nDepend: Small console app for parsing nDepend output files and find assemblies that breaks the Stable Dependencies PrincipleStudentsPointManager: StudentsPointManagertclh123test: 4testThai Sign Language Translator: Thai Sign Language Translator with Kinect Sensor.The House FM / My Praise FM Desktop App: An App to play Christian radio on the desktop of windows Vista and Windows 7 computersTradeSea: Uni ProjectVisual Dependency Tracer: This tool will help you understand how an excel formula is derived/calculated. It provides a visual representation (tree) of the formula, including the precendents and dependents.VK Video Player: Video player for russian social network vk.comXrmSvcToolkit: XrmSvcToolkit is a small JavaScript library that helps you access Microsoft Dynamics CRM 2011 web service interfaces (SOAP and REST).

    Read the article

  • EPM 11.1.2 - EPM Infrastructure Tuning Guide v11.1.2.1

    - by Ahmed Awan
    Applies To: This edition applies to only 11.1.2, 11.1.2 (PS1). One of the most challenging aspects of performance tuning is knowing where to begin. To maximize Oracle EPM System performance, all components need to be monitored, analyzed, and tuned. This guide describe the techniques used to monitor performance and the techniques for optimizing the performance of EPM components. TOP TUNING RECOMMENDATIONS FOR EPM SYSTEM: Performance tuning Oracle Hyperion EPM system is a complex and iterative process. To get you started, we have created a list of recommendations to help you optimize your Oracle Hyperion EPM system performance. This chapter includes the following sections that provide a quick start for performance tuning Oracle EPM products. Note these performance tuning techniques are applicable to nearly all Oracle EPM products such as Financial PM Applications, Essbase, Reporting and Foundation services. 1. Tune Operating Systems parameters. 2. Tune Oracle WebLogic Server (WLS) parameters. 3. Tune 64bit Java Virtual Machines (JVM). 4. Tune 32bit Java Virtual Machines (JVM). 5. Tune HTTP Server parameters. 6. Tune HTTP Server Compression / Caching. 7. Tune Oracle Database Parameters. 8. Tune Reporting And Analysis Framework (RAF) Services. Click to Download the EPM 11.1.2.1 Infrastructure Tuning Whitepaper (Right click or option-click the link and choose "Save As..." to download this pdf file)

    Read the article

  • Crawling a Content Folio

    - by Kyle Hatlestad
    Content Folios in WebCenter Content allow you to assemble, track, and access a logical group of documents and/or links.  It allows you to manage them as just a list of items (simple folio) or organized as a hierarchy (advanced folio).  The built-in UI in content server allows you to work with these folios, but publishing them or consuming them externally can be a bit of a challenge.   [Read More]

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >