Monthly Archives

Articles indexed in April 2012

Page 14/252 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• OpenSSL error while running punjab

  - by Hunt

  i ran punjab - BOSH connection manager - using twistd -y punjab.tac command in my centos but i am getting following error Unhandled Error Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/local/lib/python2.7/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "punjab.tac", line 39, in <module> '/etc/pki/tls/cert.pem', File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 68, in __init__ self.cacheContext() File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 78, in cacheContext ctx.use_privatekey_file(self.privateKeyFileName) OpenSSL.SSL.Error: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] Failed to load application: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] my configuration file of punjab is sslContext = ssl.DefaultOpenSSLContextFactory( '/etc/pki/tls/private/ca.key', '/etc/pki/tls/cert.pem', ) How can i resolve above error

  Read the article

• OSX 10.6 integration into NIS/netgroup/automount infrastructure

  - by mdpc

  I have an existing infrastructure where accounts are maintained under NIS (yp) with no local unix accounts. Also, all the standard maps including hosts, mail aliases, netgroups, etc...are maintained in this form. Extensive use of the UNIX/Linux automounter with items scattered over the network on NFS servers. There are NO ACLs on any local or shared files. All mail needs to use basically the nullclient sendmail configuration feeding into a different system. I now have a requirement to integrate an Apple OSX 10.6 system into this environment and make it run seamlessly. My initial reading and second-hand information seems to indicate that this may not be possible on the native OSX 10.6 system. I'm concerned. Any ideas as to how to accomplish this task and make everybody happy? Thanks PS: I have never used an Apple OSX system.

  Read the article

• Remote viewing on a Linux server?

  - by Zeno

  I have a Slackware Linux server that doesn't have a monitor. It doesn't run any GUIs. Is there a way to remotely access the screen? I always use SSH, but there are times where the SSH services fails and I can't do anything (nor even tell what the problem is). I use Teamviewer from my Windows computer to other PCs, but is there anything I can use to remotely view this from a Windows machine? I also want to see what it's doing at boot, before the SSH service starts.

  Read the article

• error svn: OPTIONS could not connect to server

  - by benza

  I'm trying to checkout a repository with an http address. I tried with different machine but I obtained every time time the same error: svn: OPTIONS of 'http://svn.macports.org/repository/macports/trunk': could not connect to server (http://svn.macports.org) I can't understand the problem, the address is http so I think that is a problem of subversion with http address (the repository is the one for Macport for MAC OS but I think that the problem is not about the repository but is a subversion problem)

  Read the article

• configuring two network interfaces in ubuntu 10.04.1

  - by Bill Smith

  I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

  Read the article

• Windows 32-bit and 64-bit and GPT

  - by MrLane

  I know similar questions have been asked before across several sites, but the answers at least to me have been confusing and conflicting. My understanding has always been that 64-bit Windows will create and use GPT disks just fine, but will not boot from them without a UEFI BIOS. Also my understanding WAS that 32-bit Windows could not use GPT at all and so is always restricted to 2.2TB disks, which was another reason to move to 64-bit on top of the 4GB memory limit. But I have now read that this isn't correct: 32-bit Windows will create and use GPT disks just as 64-bit does. The only resriction is that you can't boot 32-bit Windows even if you DO have a UEFI BIOS? I don't think much of the literature has explained this well. There are several tools floating around for creating virtual disks or 2.2+.8GB partition schemes and such for 32-bit systems. Why when it seems you can use GPT in 32-bit Windows anyway. It also seems that people blame MS for lagging behind with respect to all of this: but it seems the issue is with BIOS manufactures not supporting UEFI rather than MS not supporting GPT... Is my new understanding now correct?

  Read the article

• Setting up a Pagefile and Partition in Server 2008

  - by Brett Powell

  I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

  Read the article

• Failed reverse DNS and SPF only when using Thunderbird!

  - by TruMan1

  I have a reverse DNS and SPF records correctly setup for my mail server. Sending webmail from it works perfect. The problem is when Thunderbird sends out emails, it is using the client's IP address for the hostname. I have SMTP authentication and specified my mail server's as the outgoing SMTP. Mail is being sent, but it is not "signing" the email with the mail server's IP address.. it is using the client's. Is there any way to fix this? This is the spam error I get when sending from Thunderbird: Spam: Reverse DNS Lookup, SPF_SoftFail

  Read the article

• Filezilla FTP Server Ports - Active Connections

  - by Brian Webster

  I have been obtaining errors like below because I did not specify enough ports for the active FTP connections. Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection.Error: Failed to retrieve directory listing Things seem to work nicely with limited ports, but when I perform actions that cause very rapid short-lived connections, something like 20-30% of the connections drop with the error above. I started with ports 50000-50100. When I opened up to 50000-52000, the errors disappeared. Why did this fix my problem? I would like to understand why adding ports fixed it. I have a suspicion that ports become "locked down" for a few moments surrounding when they are used in a connection. If connections are happening so rapidly, there may be no ports available, thus the above error. Can anybody confirm?

  Read the article

• Server 2008 Disk Management Hangs

  - by Payson Welch

  So I have looked everywhere for the solution to this and have tried many things. There is one post on SE related to this and I tried the suggested answer but I am still having problems. We have a server running Server 2008 R2 Standard x64. I need to increase the space of C: since the free space is running very low. However when I open Server Manager and try to go to the "Disk Management" snap-in it just hangs. There is a status message on the bottom of the window that says "Connecting to Virtual Disk Service...". Here are the steps I have taken: Ran sfc /scannow Set all of the drives to be dirty and rebooted so that they would be scanned Executed chkdsk /f /r /b /v on all of the drives. Checked for Windows updates (none). Verified that the services "Virtual Disk", "RPC Procedures" and "Plug and Play" are all running. One symptom is that the service "Virtual Disk" does not cleanly shut down. I receive a message about the process being unexpectedly terminated when I try to stop or restart it. Also I cannot find anything relevant in the event logs. Any ideas or suggestions?

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths? EDIT Just to clarify, our concern is not to do so much with server performance or bandwith. We could obviously employ an external CDN server but we have plenty CPU and bandwith. Our concern is with how to have "old" sites with plenty semi-static HTML content benefiting from splitting connections for images and static content via apache without having to change the html to absolute paths (ie. image.jpg to cdn.main.com/image.jpg happening on the server not the code)

  Read the article

• Set up FTP user with ProFTPD on Ubuntu

  - by kidrobot

  I want to set up a user "ftp" so they can upload and download files in my /home/httpd/mysite/public_html directory. All files in public_html are owned by user ftp and in group www-data so the ftp user looks like so: uid=108(ftp) gid=33(www-data) groups=33(www-data),65534(nogroup) When I try to connect via an FTP client I get 530 Login incorrect. ftp: Login failed. What do I need to uncomment/add to the proftpd.conf file to make this work?

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• How do I stop IIS from sending minutely GET requests to my proxied mongrel server?

  - by brad

  I have a rails application running on Windows Server 2008 running IIS7.5. I am using Application Request Routing to send requests to the Mongrel server via IIS (I didn't want to set it up like this but this was the environment I have been forced to use). IIS seems to send a GET request to the Mongrel server once every minute. This is not a huge deal but it does cause a lot of pollution in my logs and also creates a large amount of unwanted session data. I would really like to stop it from doing this. Is there a way?

  Read the article

• How can I use VirtualDocumentRoot to serve the www subdomain with SSL enabled?

  - by mdgreenwald

  I am able to serve http://www.domain.com and http://domain.com. Also https://domain.com works fine too. But not https://www.domain.com for some reason this doesn't work. I even created a www.domain.com in my sites-availible folder and also enabled it. I reloaded the configuration and yet it still doesn't work. I have a wildcard certificate so that is NOT the problem. <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin [email protected] ServerName *.domain.com:443 ServerAlias www.domain.com VirtualDocumentRoot /var/www/%0 Thanks for any help.

  Read the article

• Can one config LDAP to accept auth from ssh-agent instead of from Kerberos?

  - by Alex North-Keys

  [This question is not about getting your LDAP password to authenticate you for SSH logins. We have that working just fine, thank you :-) ] Let's suppose you're on a Linux network (Ubuntu 11.10, slapd 2.4.23), and you need to write a set of utilities that will use ldapmodify, ldapadd, ldapdelete, and so on. You don't have Kerberos, and don't want to deal with its timeouts (most users don't know how to get around this), quirks, etc. This resolves the question to one of where else to get credentials to feed to LDAP, probably through GSSAPI - which technically doesn't require Kerberos despite its dominance there - or something like it. However, nearly everyone seems to have an SSH agent program, complete with its key cache. I'd really like an ssh-add to be sufficient to allow passwordless LDAP command use. Does anyone know of a project working on using the SSH agent as the source of authentication to LDAP? It might be through an ssh-aware GSSAPI layer, or some other trick I haven't thought of. But it would be wonderful for making LDAP effortless. Assuming I haven't just utterly missed a way to use ldapmodify and kin without having to type my LDAP passwords - using -x is NOT acceptable. At my site, the LDAP server only accepts ldaps connections, and requires authentication for modifying operations. Those are requirements, of course. Any ideas would be greatly appreciated. :-)

  Read the article

• Tips on self-learning boot-time fundamentals (grub, disks, partitions, LVMs, etc)?

  - by Harry

  Is there any good resource which I can use to self-learn all the low-level system administration details on Grub, Grub2, disks, partitioning, LVM, etc? I'm comfortable with system admin tasks post-boot but I lack knowledge about both the fundamentals and actuals of all that happens during boot on a Linux system such as Fedora. Any recommendations on how to setup a testbed on my desktop for learning the above? I may not be able to get another machine / harddisk, so may have to rely on something like VirtualBox. But don't know if there are other (better) options... so asking for tips from those who have self-learned / mastered this track themselves.

  Read the article

• touch /forcefsck not working on Fedora16

  - by Harry

  I need to run fsck in order to repair my one and only hard-disk. I have no rescue CD/USB available. I did the following: touch /forcefsck chmod a+rw /forcefsck # just to be really sure reboot But no fsck happened on reboot, though the /forcefsck file quietly disappeared (why BTW?)! I saw some responses on the Net suggesting a shutdown -rF to auto-run fsck on reboot, but the shutdown I have on my F16 does not have any -F option.

  Read the article

• Why is it that XCode cannot push my changes?

  - by Justin Case

  I am writing an iOS application in XCode. I associated a remote repository to it. I finished writing a View Controller file and then went to File - Source Control - Commit. I wrote a commit message. Oddly, every time I typed a space, an error popped up that read "1 of 2 files will be commited." I then tried to push the commit by clicking File - Source Control - Push. However, I get an error that notes that I have unsaved changes. Why? Didn't I just commit?

  Read the article

• change from bash shell prompt to regular shell prompt on centos

  - by user881480

  my centos environment has just become bash shell prompt: -bash-3.2# how do I change it back to the usual # prompt? what places should I check for possibly modifications? Update: I was not clear in my question: the prompt used to be just a single # and supports more syntax(a different shell script than bash 3.2 perhaps)? I would like to switch back to that. for example, ll is not longer supported in this bash shell

  Read the article

• CentOS 5.8 server, installed Web Server vs yum install httpd

  - by Shiro

  I would like to know, what is the different between, the build-in CentOS server web server vs I install manual with yum install httpd I am new in CentOS. I just installed my CentOS 5.8 Server with Web Server checked. With some Google Search with LAMP installation, they listed with yum install httpd I had check inside /etc/init.d/ already had httpd I try to run yum install httpd http-devel It shows not yet installed. What will happen if I install yum version? What should I do? What is the best practise? Should I remove the Web Server install by default with CentOS? My goal is install LAMP (PHP v5.2.17).

  Read the article

• Page pool memory

  - by legiwei

  I'm currently using Windows XP SP3 32 bit, using C2D E6320 with 2GB RAM. When I am playing Starcraft 2, I encounter an error where it says my system is running low on page pool memory. Starcraft graphic settings suggested a high settings for me. I do not think it has to do with my GC but with my RAM. I then made a search to try to rectify the problem. Apparently, it's something to do with my virtual memory. I then proceed to try to the suggested solution which is to temper the registry and limit the page pool memory to 384MB. However, having done so, I still could not achieved it. I've seen screenshot settings of windows XP with 2GB having 384MB of page pool memory. My default settings puts it at 195MB whereas when I try to increase the pool limit, it can only go to a max of 229MB. I tried increasing my RAM capacity to 3GB but the pool limit still remains. I like to know how to increase my page pool memory. I've tried searching for solution but to no avail other than the one that I've mentioned above (which didn't solve my problem completely).

  Read the article

• Lag spikes at full CPU usage, lagy mouse, maybe video card

  - by Roberts

  My PC specs: Motherboard Name - Gigabyte GA-945PL-S3 CPU Type - DualCore Intel Core 2 Duo E4300, 1800 MHz (9 x 200) OS - Microsoft Windows 7 Ultimate OS Kernel Type - 32-bit OS Version - 6.1.7601 I bougth a new video card one month ago. GeForce 210. I didn't have any problems. I wanted to overclock it, in other words: "Play with it". So I installed Gigabyte EasyBoost from CD and overclocked the GPU 590 + 110 mhz, memory to max to 960mhz from 800mhz. Benchmarks showed a little bit bigger score. Then I overclocked shader clock from 1405 to [..] (don't remeber really). So I was playing Modern Warfare 2 when off sudden computer froze when I wanted to select team, I was afk before that. I had to reset CMOS. After that I had problems with Skype: unread messages and no sound. Then I figured it out that when ever I open EasyBoost - Skype starts to glitch again. Now I use EVGA Precission X. Now after a month, I cleaned computer and closed the case, it was open all the time. I started to overclock GPU clock only (just a bit) because there was no problems that would stop me. So sometimes on heavy CPU load graphics starts to lag. Dragging a window is painful to watch too. Sometimes the screen freezes for 5 to 10 seconds (I can see that hard disk activity is maximal). You may say that CPU fault it is, isn't it? But sometimes lag spikes starts randomly when CPU load is at maximum. All 3 benchmark softwares (PerformanceTest, NovaBench and MSI Kombustor) shows that performance of my video card has dropped about 25%. BUT! CPU score is lower too. I ignored these problems but when I refreshed Windows Experience Index I was shocked. Month before (in latvian language but not so hard to understand): Now 01.04.2012 (upgraded RAM): This happened when I tried to capture Minecraft with Fraps on underclocked GPU to 580mhz (def: 590mhz): All drivers are up to date. Average CPU temperature from 55°C to 75°C (at 70°C sometimes starts these lag spikes). Video card's tempratures are from 45°C to 60°C (very hard to reach 60°C). So my hope is that the video card is fine, cause this card is very new and I want to upgrade CPU anyways. Aplogies for my mistakes in vocabulary (I am trying to type this as fast I can). Update 02.04.2012 - 7:21 Forgot one thing, my hard disk is extrimly slow and I will upgrade it this week or next week so I will be installing same OS again. I am multi-tasker but I can't do much because of 1.8 GHz CPU and slow hard drive (Model ID - WDC WD800JD-60JRC0). The Windows Experience Index is back to normal. Actually "Spelu grafika" (Gaming graphics) are higher than month ago. During this test mouse was very lagy, but month ago there weren't any problems. WHY!?

  Read the article

• How to remotely open gedit with SFTP URL in Gnome through SSH?

  - by Álvaro Justen

  My setup is weird and I can't change it now. I have two machines: local-machine: it's my desktop running Ubuntu with Gnome remote-machine: it's one virtual machine, also running Ubuntu but without X In both machines I have my private and public SSH keys. I need to run SSH from remote-machine to local-machine and run gedit (in local-machine, under the default $DISPLAY) but openning a file in remote-machine throught SFTP. Something like this: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 gedit sftp://remote-machine/some/file" The command above doesn't work. gedit shows this message: Could not open the file sftp://remote-machine/some/file. gedit cannot handle sftp: locations. Note that: /some/file exists on remote-machine. I can SSH normally from remote-machine to local-machine using my SSH key without any problems! I can run the command DISPLAY=:0.0 gedit sftp://remote-machine/some/file in a terminal on local-machine and gedit opens the file on remote-machine without any problems - but the terminal in which I executed the command is running in DISPLAY :0 (really, it's gnome-terminal). I also tried -t option of SSH client (to force pseudo-tty allocation) but it didn't work. If I try to run DISPLAY=:0.0 gedit sftp://remote-machine/some/file in local-machine but under a tty (for example in tty1, by pressing <Ctrl>+<Alt>+<F1>) it doesn't not work - I get the same error when running from remote-machine. I found that if I pass the environment variable DBUS_SESSION_BUS_ADDRESS with a correct value, it works! So, if I do something like that: myuser@local-machine:~$ env | grep DBUS_SESSION_BUS_ADDRESS > env.txt myuser@local-machine:~$ scp env.txt remote-machine: and then: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 $(cat env.txt) gedit sftp://remote-machine/some/file" it works! The problem is that I'm not on local-machine so I can't get the correct value for this env variable. Is there any other way to make this work?

  Read the article

• TP-LINK TD-W8151N Modem/router as just wi-fi router

  - by Reshma

  I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >